Samsung SCH-211 User manual

SCH-r211 Series
P O R T A B L E
M O B I L E
T R I - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein Rd.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2009 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungwireless.com/support
R211.04_CA30_CB_020409_F1
Printed in Korea.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ..............................................3
Section 5: Entering Text ............................................... 26
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 26
Using T9® Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Section 2: Understanding Your Phone ...........................8
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 11
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Section 3: Call Functions ............................................. 16
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 16
Making a Call — Contacts Dialing . . . . . . . . . . . . . . . . . . . . . 17
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 17
In-Use Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Rejecting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Section 4: Menu Navigation ......................................... 24
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1
Section 6: Understanding Your Contacts .................... 29
Your Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 29
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 33
Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Renaming a Contacts Group . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Section 7: Messaging ................................................... 39
Accessing Your Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Creating and Sending New Messages . . . . . . . . . . . . . . . . . . 39
Message Send Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Section 8: Browser ....................................................... 47
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launching Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How Browser Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47
47
47
48
48
Section 9: Games & Apps ............................................. 49
Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Section 10: Tools/Utilities ............................................ 50
Tools/Utilities Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
50
51
52
54
55
55
56
58
Section 11: Changing Your Settings ............................ 59
Accessing Your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
59
59
59
62
63
65
71
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Section 12: Health and Safety Information ................. 73
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . .
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . .
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . .
Consumer Information on Wireless Phones . . . . . . . . . . . . . .
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Your Phone Near Other Electronic Devices . . . . . . . . . .
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . .
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other Important Safety Information . . . . . . . . . . . . . . . . . . . .
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Availability of Various Features/Ring Tones . . . . . . . . . . . . . .
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . .
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
73
74
74
75
80
82
84
84
85
86
87
88
88
89
89
90
90
91
Section 13: Warranty Information ............................... 93
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 93
End User License Agreement for Software . . . . . . . . . . . . . . . 96
Index ............................................................................ 101
2
Section 1: Getting Started
This section explains how to start using your Samsung r211
phone by activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put together.
Understanding this User Manual
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 101.
highlight
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the manual, beginning on page 73.
select
Notes and Tips
Throughout this manual there is text that is set apart from the
rest. These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
• Notes — Explain alternative options within the current feature, menu,
or sub-menu.
• Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
• Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
3
➔
Use the Navigation key (
) to move a
highlighting effect onto a menu item or screen
item of interest.
After “highlighting” a menu item or screen item,
press the OK key (
) to launch, access, or
save a highlighted menu item or screen field of
interest.
Used in place of “select” in long “drill down”
procedure steps.
Example: Select Settings ➔ Call Settings ➔ Call Answer.
Installing the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
1.
Insert the top end of the battery first, matching the gold
contacts on the top end of the battery to those inside the
phone.
4.
Slide the cover upward into place.
Remove the Battery
Important!: You must unplug the Travel Adapter (if it is connected) before
removing the battery from the phone during charging to avoid
damage.
1.
If your phone is on, press and hold the
key to turn off
the phone.
2.
Press the battery cover at point (1) and slide the cover
toward the bottom end of the phone.
2.
Press the bottom end of the battery down into the phone.
3.
Place the battery cover over the battery.
3.
Lift the battery cover (2) up and away from the phone,
bottom end first.
Getting Started
4
4.
Lift the battery (3) up and away from the phone, bottom
end first.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
Note: For connection to an electrical supply not located in North America,
you must use an adaptor of the proper configuration for the power
outlet. Use of the wrong adapter could damage your phone and void
your warranty.
2.
Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the right side of your
phone.
Use the Travel Adapter
The travel adapter included with your phone is a convenient,
light-weight charger that rapidly charges your phone from any
120/220 VAC outlet.
1.
Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Incorrect
5
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Note: As with any other radio-transmitting device, do not touch the antenna
while using your phone as this can affect call quality and can cause the
phone to operate at a higher power level than is necessary.
Low Battery Indicator
• The phone begins searching for a network signal.
• Once the phone finds a signal, the time, date, and day appear in the
bottom of the display.
• You’re now ready to place and receive calls.
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Three bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
A blinking empty battery icon (
) and a tone sounding
indicate you have two to three minutes before the battery is too
low to operate the phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
If necessary, contact your Wireless Carrier and follow their
instructions for obtaining service. We suggest that you read this
manual to fully understand the services your phone supports.
Turning Your Phone On
䊳
Press and hold
until the display lights.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turn Your Phone Off
䊳
Press and hold
for two or more seconds. Your phone
powers off.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Getting Started
6
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1.
In standby mode, press and hold the
own mobile number and press
2.
key or enter your
to dial Voicemail.
Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
䊳
7
In standby mode, press and hold the
key or enter your
own mobile number and press
to dial Voicemail. After
connecting, you will hear your voice greeting. You are
prompted to enter your password.
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Features of Your Phone
Domestic and international voice and text messaging service
(available on participating networks).
• High speed data [CDMA 2000 1x Advanced Wireless Services (AWS)
Technology]
• Global Positioning (GPS) Technology
• PIM Functions
• Text (SMS) Messaging
• WAP (Wireless Application Protocol) Internet Browser
• Speakerphone
Front View of Your Phone
1
2
16
3
4
5
6
7
8
15
14
13
12
11
9
10
Understanding Your Phone
8
Features
1.
tones, alarm tones, and the other parties to calls.
2.
to your phone.
Display — Indicates the status of your phone, including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on.
4.
Volume Key — In standby mode, lets you adjust the ring
6.
9
8.
Voicemail Key — Lets you speed dial your Voicemail
account to review your voice messages.
9.
Special Function Keys — Enter special characters. Perform
various functions.
10. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
11. Alpha-numeric Keys — Use these keys to enter numbers,
letters, and characters.
12. CLR Key — Deletes characters from the display when you
volume. When receiving a call, mutes the ringer. During a
are in text entry mode. Press this key to return to the
call, lets you adjust the voice volume. In Menu mode, lets
previous menu or screen when navigating features on your
you scroll through the phone menu options.
5.
SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
Power / Accessories Connector — Used to plug in charging
accessories and to connect any available accessory cables
3.
7.
Earpiece / Speaker — Lets you hear ringing and alert
OK Key — In standby mode, launches the Main Menu.
phone.
13. END Key — Ends a call. If you press and hold the END key,
Pressing when navigating through a menu accepts the
the power goes On or Off. When you receive an incoming
highlighted option.
call, press to send the call to voicemail.
Left Soft Key — Used to navigate through menus and
14. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
applications and to select the choice indicated at the
bottom left corner of the Display.
bottom right corner of the Main Display.
15. Navigation Key — In standby mode, launches selected
functions or applications. In Menu mode, lets you scroll
• When the Right soft key function is Back, press the Back soft key
(
) to back up one menu level.
Command Keys
OK Key
• In standby mode, launches the Main Menu.
• In a menu, press the OK key (
) to accept the highlighted selection.
• When the OK key function is Edit, press the Edit key (
) to edit a
Draft message.
Soft Keys
Clear Key
through the phone menu options.
16. Headset Connector — Lets you connect wired headsets to
your r211 for handsfree operation.
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the Left soft key and
the Right soft key.
Left Soft Key
Some functions of the Left soft key (
) are as follows:
• In standby mode, press the Settings soft key (
) to launch the
Settings menu.
• When the Left soft key function is Edit, press the Edit soft key (
)
to edit a Contacts entry.
Right Soft Key
Some functions of the Right soft key (
) are as follows:
• In standby mode, press the Contacts soft key (
) to access the
Contacts Find screen.
• When the Right soft key function is Options, press the Options soft key
(
) and a pop-up menu appears.
The CLR key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the
key to return
to a previous menu or to return to standby mode from any menu.
• If you enter an incorrect character, briefly press
to backspace
(and delete) the character.
• To erase the entire sentence, press and hold
.
• To back up one menu level, briefly press
.
END Key
• Press and hold the END key (
) to turn on your phone.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the
last input.
Understanding Your Phone
10
SEND Key
2.
The SEND key (
) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• In standby mode, briefly press
to display a list of recent calls to
and from your phone.
• In standby mode, press
twice to call the most recent number.
• Press
to pick up a waiting call. Press
again to switch back
to the other call.
Navigation Key
Use the directional keys on the Navigation key (
) to
browse menus, sub-menus, and lists. In standby mode, each
directional key also acts as a shortcut to launch applications.
Understanding the Display
Screen
1.
The top line of your phone’s
display contains icons that
indicate network status,
1
2
3
4
battery power, signal
strength, connection type, and more.
11
The center portion of the display shows information such
as call progress information, messages, and applications.
3.
The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key (
(
) will display the Settings screen, pressing OK
) will display the Main Menu, and pressing the Right
soft key (
) will show the Contacts Find screen.
Display Screen Icons
Your r211 phone can show you definitions of the icons that
appear on the top line of the display.
To access the Icon Glossary:
䊳
In standby mode, press
, then select Tools & Settings
➔ Settings ➔ Phone Info ➔ Icon Glossary. A list shows of
the icons that can appear on the top line of the displays.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Choice
– Example: “Save Message?”
• Reconfirm
– Example: “Erase All Messages?”
• Performing
– Example: “Sending...” “Connecting...”
• Completed
– Example: “Message Saved”
• Information
– Example: “New Message”
• Error
– Example: “System Error!”
• Warning
– Example: “Low Battery,” “Memory Full!”
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note: During a phone call, the display backlight dims and turns off after 7
seconds to conserve battery power, regardless of the Backlight setting.
(For more information, refer to “Backlight” on page 61)
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except
or
, or by pressing only the
key. (For more
information, refer to “Call Answer” on page 63)
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key
(
), then choose the input mode from the pop-up menu using
the Navigation key.
Optional input modes are T9 Word, Abc, ABC, Symbols, and 123.
(For more information, refer to “Entering Text” on page 26)
Tip: You can cycle between T9 Word, Abc, and 123 by repeatedly pressing
and holding the
key until the phone beeps.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key. Unlock your phone by entering the lock code when
prompted. (For more information, refer to “Change Lock” on
page 67)
Understanding Your Phone
12
Standby Mode
Talk Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
• After you power the phone on.
• When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Place Calls in Standby Mode
1.
While in standby mode, enter a phone number, and press
to place a call.
2.
Press
Speakerphone Mode
To share a call with other people nearby, place your phone in
Speakerphone Mode by pressing the Options soft key and
selecting Speaker On during the call.
Caution!: Keep the phone away from you ear while in Speakerphone Mode.
(For more information, refer to “Responsible Listening” on
page 82)
to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
• View Now — This selection allows you to view the messages now.
• View Later — This selection allows you to view the messages at a
later date.
Highlight the desired viewing option and then press
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
to “In-Use Menu” on page 18.)
.
To disable Speakerphone Mode, press Options and select Speaker
Off or end the call.
Silent Mode
Silences the tones your keypad makes when you press a key.
To enter Silent Mode:
䊳
In standby mode, press and hold
returns to standby mode.
13
. “Entering Silent
Mode” briefly appears in the display and your phone
To exit Silent Mode:
䊳
Options are:
• Ringer Off
While in Silent mode and standby mode, press and hold
. “Exit Silent Mode” briefly appears in the display and
your phone returns to standby mode.
Vibrate Mode
• Medium
• Vibrate
• Medium/High
• Low
• High
• Low/Medium
• Vibrate/High
While in Vibrate Mode, your phone does not ring to indicate
incoming calls or alarms, it vibrates instead.
When you are satisfied with the setting, press SET. Your phone
returns to standby mode.
To enter Vibrate Mode:
You can also enter the Volume > Voice Calls sub-menu by
pressing MENU ➔ Tools & Settings ➔ Settings ➔ Sound Settings
➔ Volume ➔ Voice Calls. Use the Volume key (
) on the
left side of your phone to adjust the ringer volume setting.
䊳
In standby mode, repeatedly press the Volume key
(
) down until “Vibrate” appears in the display.
Note: The Volume key is on the left side of phone.
Adjust the Ringer
In standby mode, press
1.
In standby mode, press
ringer volume as desired.
up or down.
up or down to set the call
The Vibrate icon (
) appears in the display when the phone is
in Vibrate mode. The Vibrate/Ring icon (
) appears in the
display when the phone is in Vibrate/High mode.
Keypad Lock
You can avoid accidental dialing and/or phone feature activation
by locking the keypad when not using your phone.
To Lock the Keypad:
䊳
In standby mode, press and hold
until Keypad is
locked! pops up in the display.
Understanding Your Phone
14
To Unlock the Keypad:
1.
In standby mode, press the Unlock soft key. Press * to
2.
Press
unlock pops up in the display.
15
. Keypad is unlocked! pops up in the display.
Section 3: Call Functions
This section explains how to make or answer a call. This section
also describes the features and functionality associated with
making or answering a call.
Making a Call — Number Entry Dialing
1.
With the phone on, enter the number you wish to call using
the keypad.
2.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Press
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
to place the call.
Dialing Emergency Numbers
You can dial any of the numbers 911, *911, or #911 to place an
emergency call.
If you dial 911, *911, or #911 and press
, your phone dials
the emergency number 911, automatically.
Important!: Emergency number 911 is hard-coded into your phone. You can
dial this number almost any time, even when the phone is locked
or restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
To manually call a number with pause(s) without storing it to your
Contacts:
1.
2.
Enter the number you wish to call.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
Call Functions
16
3.
Highlight the desired pause option.
4.
Press the OK soft key to include the highlighted pause in
To dial a number other than the Default Number:
5.
5.
Press
After you store phone numbers and contact names in your
phone’s Contacts list, you can dial any Contacts entry without
having to remember and enter the entire phone number.
To dial a Contacts entry:
1.
In standby mode, press MENU ➔ Contacts ➔ Find. The
Contacts Find screen appears in the display.
2.
Use the keypad keys to enter the first few letters of the
name of a Contacts entry you want to call. (For more
information, refer to “Entering Text” on page 26)
3.
Highlight the Contacts entry you want to dial.
To dial the Default Number for this Contact:
4.
Press
6.
Highlight the particular number you want to dial, then
press
.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s Speed Dial
number in the list. You can assign and change Speed Dial
numbers for your Contacts. (For more information, refer to
“Speed Dial Numbers” on page 37)
One-Touch Dialing
Speed Dial numbers 002 through 009 are One-Touch dialing
numbers. You can call the Contacts phone numbers assigned
Speed Call numbers 002 through 009 by pressing and holding a
single key.
.
Tip: You can select any number stored in a Contacts entry as the Default
Number. (For more information, refer to “Editing an Existing Contact
Entry” on page 33.)
17
display.
to call the number.
Making a Call — Contacts Dialing
After highlighting the desired Contacts entry, press the
VIEW soft key. The View Contact screen appears in the
your number sequence.
Example: For location number 003, press and hold
until the name and
number appear in the display and the number is dialed.
Two-Touch Dialing
Speed Dial numbers 010 through 099 are Two-Touch dialing
numbers.
Example: For location number 013, briefly press
, then press and hold
until the name and number appear in the display and the
number is dialed.
Three-Touch Dialing
Speed Dial numbers 100 through 999 are Three-Touch dialing
numbers.
Example: For location number 113, briefly press
, briefly press
again, then press and hold
until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) P pause(s),
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
1.
While in a call, press the Mute / Unmute soft key to disable/
2.
While in a call, press the Options soft key. The following
enable the microphone.
options pop-up in the display:
•
•
•
•
Message — Display the Messages menu.
Contacts — Display the Contacts Find screen.
Recent Calls — View your All Calls log.
Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
• Voice Privacy — When set to Enhanced, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection.
• Location — Turn your GPS location on or set GPS location for
emergency calls only.
• Speaker On / Off — Enables/disables Speakerphone mode.
3. With the In-Use Menu showing, do one of the following:
• Select a menu option to open the highlighted menu or to activate
the highlighted feature.
• To exit the In Use menu, press
.
In-Use Menu
You can access a number of menus and features while in a call.
Call Functions
18
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides:
seven ring volume settings including 1- beep, Vibrate, or Silence All,
and/or different ring types to distinguish callers.)
• A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the
following events occurs:
• You answer the call.
• You ignore the call.
• The calling party ends the call.
• The call is sent to voicemail.
Answering an Incoming Call
䊳
Press
. The ring tone and/or vibration stops and the
caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but
. (For more information, refer to “Call Settings” on
page 63)
19
Rejecting a Call
When you reject an incoming call, the call is immediately
forwarded to your voicemail.
䊳
During an incoming call, press the Ignore soft key. The
caller is immediately forwarded to your voice mail.
Tip: You can mute the ringer to ignore an incoming call by pressing the Quiet
soft key.
Adjusting the Call Volume
In standby mode, repeatedly press the Navigation key Up or
Down until the desired Voice Calls level appears in the display,
then press the SET soft key.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Review the Calls Log
1.
In standby mode, press MENU ➔ Calls. The following Calls
log options appear in the display:
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
• Data Counter
2. Select the desired Calls log. A list of calls appears in the
2.
Highlight a call entry, then press the OPEN soft key to view
3.
Press the Msg soft key to send a text message to the
further information about the call.
number shown in this outgoing call record.
display.
4.
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
The following subsections describe the various Calls log
options.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing Calls log. You can review the
Outgoing Calls log for the time and date of a call, as well as other
information.
Tip: To quickly view your most recent calls, briefly press
in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
1.
In standby mode, press MENU ➔ Calls ➔ Outgoing Calls. A
list of your outgoing calls appears in the display.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Save the phone number in this outgoing call record to a Contacts
entry (New or Existing).
• Details — Contacts entries only — Shows details of the Contacts
entry you called.
• Erase this outgoing call record. (If this is a recent call, it will no
longer appear in the Recent Calls list.)
• Lock / Unlock this outgoing call record.
• Erase All outgoing call records.
• View Timer for outgoing call records.
5. Highlight the desired option, then press the OK soft key to
perform the highlighted option’s function.
Incoming Calls
Your phone retains information about the last 90 incoming calls
and stores them in the Incoming Calls log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
Call Functions
20
1.
In standby mode, press MENU ➔ Calls ➔ Incoming Calls. A
list of your incoming calls appears in the display.
2.
Highlight a call entry, then press the OPEN soft key to view
Calls log. You can review the Missed Calls log for the time and
date of the call, as well as other information.
1.
list of your missed calls appears in the display.
further information about the call.
3.
Press the Msg soft key to send a text message to the
2.
Press the Options soft key. A pop-up menu containing the
3.
perform the highlighted option’s function.
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never answered) and stores them in the Missed
21
Press the Msg soft key to send a text message to the
number shown in this missed call record.
following options appears in the display:
• Save the phone number in this incoming call record to a Contacts
entry (New or Existing).
• Details — Contacts entries only — Shows details of the Contact
who called you.
• Erase this incoming call record. (If this is a recent call, it will no
longer appear in the Recent Calls list.)
• Lock / Unlock this incoming call record.
• Erase All incoming call records.
• View Timer for incoming call records.
5. Highlight the desired option, then press the OK soft key to
Highlight a call entry, then press the OPEN soft key to view
further information about the call.
number shown in this incoming call record.
4.
In standby mode, press MENU ➔ Calls ➔ Missed Calls. A
4.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Save the phone number in this missed call record to a Contacts
entry (New or Existing).
• Details — Contacts entries only — Shows details of the Contact
who called you.
• Erase this missed call record. (If this is a recent call, it will no longer
appear in the Recent Calls list.)
• Lock / Unlock this missed call record.
• Erase All missed call records.
• View Timer for missed call records.
5. Highlight the desired option, then press the OK soft key to
perform the highlighted option’s function.
All Calls
You can access calls from the Outgoing Calls, Incoming Calls, and
Missed Calls logs individually, or you can use the All Calls option
to access all calls from all call logs.
1.
In standby mode, press MENU ➔ Calls ➔ All Calls. A list of
all of your calls appears in the display.
2.
Highlight a call entry, then press the OPEN soft key to view
further information about the call.
3.
Press the Msg soft key to send a text message to the
number shown in this call record.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Save the phone number in this call record to a Contacts entry (New
or Existing).
• Details — Contacts entries only — Shows details of the Contact
who called you.
• Erase this call record. (If this is a recent call, it will no longer appear
in the Recent Calls list.)
• Lock / Unlock this call record.
• Erase All call records.
• View Timer for this call record.
5. Highlight the desired option, then press the OK soft key to
perform the highlighted option’s function.
4.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of your phone using the Call Timer feature.
Note: Call Timer is not for billing purposes.
In standby mode, press MENU ➔ Calls ➔ Call Timer. The
following options appear in the display:
• Last Call — View the duration of your last call.
• Home Outgoing — View the durations of your outgoing calls.
• Home Incoming — View the durations of you incoming calls.
• Roaming Calls — View the durations of your roaming calls.
• All Calls — View the duration of all calls on your phone since the
last reset.
• Last Reset — View the date and time of the last reset of call
timers.
• Lifetime Calls — View the lifetime counter of all calls since service
was initiated. (The only option is to Reset All, which resets all of the
other timers. Lifetime call records cannot be reset.)
2. Use the Navigation key to scroll through the counters.
1.
3.
Press
to exit the menu.
Call Functions
22
Data Counter
Use Data Counter to view the amount of data that has been sent
or received (or a total of both) using the data services that your
phone supports, such as Axcess Shop. The Data Counter can be
a helpful tool for monitoring data usage, especially if your service
agreement has specified limits.
1.
In standby mode, press MENU ➔ Calls ➔ Data Counter. The
following options appear in the display:
• Transmit — View the amount of data (in kilobytes) that your phone
has transmitted since last being reset.
• Received — View the amount of data (in kilobytes) that your phone
has received since last being reset.
• Total — View the amount of data (in kilobytes) that your phone has
transmitted and received since last being reset.
• Last Reset — View the last date and time the counters were reset.
• Lifetime Data Counter — View the amount of data sent/received
since service was activated. (The only option is to Reset All, which
resets all of the other counters. Lifetime data counter records
cannot be reset.)
Roaming
What is Roaming?
Roaming lets you use your phone when you travel outside of your
Wireless Provider’s coverage area. The Roaming icon (
)
23
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more
frequent recharging. Contact your Wireless Provider for more
information about Roaming.
How Roaming Works
System Select lets you set roaming preferences if you move in
and out of your home network. The following roaming options are
available:
• Home only — Your phone is available for normal operation only in the
designated coverage area.
• Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note: For more information, refer to “System Select” on page 69
Section 4: Menu Navigation
This section explains the menu navigation and keypad shortcuts
for your phone.
Menu Navigation
Access the menus and sub-menus in your phone using the
Navigation key (
) and soft keys (
or
), or use a
shortcut.
1.
In standby mode, press the MENU key (
). The Main
Menu appears in the display.
Note: More than one menu may appear in your display. This setting can be
modified in the Display > Menu Style menu. (For more information,
refer to “Menu Style” on page 60)
option. In this way, you can reduce the number of key presses
needed to drill down through your phone’s menus.
Example: Pressing
,
(for Tools & Settings),
(for Settings),
(for Sound Settings),
(for Ringer Type),
(for Voice Calls),
(for My Ringtones) to reach a list of available ringtones is
much shorter than repeated use of the Navigation key to highlight
each option followed by pressing
.
Quick Search Method
For information on enabling Quick Search, see “Quick Search” on
page 70.
1.
In standby mode and with Quick Search enabled, press the
first few numeric keys that correspond to the letters of the
2.
Use the Navigation key to browse through the menus.
3.
Press
4.
Press the Back soft key or the CLR key (
menu option or sub-menu title.
to access a desired menu or sub-menu.
) to return to
the previous menu.
Navigate Using Menu Shortcuts
You can also access menus and sub-menus using menu
numbers. To select a menu option, just press the number key
that corresponds with the number shown with the desired menu
Example: To search for “Inbox” you would enter 462.
2.
Press the Down navigation key. A list of menu titles that
begin with letters corresponding to the number keys you
pressed appears in the display.
Menu Navigation
24
3.
Highlight the searched for menu or menu item, then press
.
Navigation Key Shortcuts
In standby mode, press a Navigation key to launch the key’s
corresponding application in the pattern shown here.
Messages
Games&Apps
Go To Web
Browser
25
Section 5: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad. This section
also describes how to use the T9 predictive text entry system to
reduce the number of key strokes needed to enter text.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
• T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
– T9 Word — Enter initial capital letters
– T9 WORD — Enter all upper case letters
– T9 word — Enter all lower case letters
• Abc — Enter letters by repeatedly pressing each phone key until the
desired character (as shown on the key) appears in the display. ABC
mode letter options are:
– Abc — Enter initial capital letters
– ABC — Enter all upper case letters
– abc — Enter all lower case letters
• 123 — Enter numbers by pressing the corresponding keys on the
phone keypad.
• Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
The current text entry mode (T9 Word, Abc, ABC, 123, or Symbols)
is indicated in the lower part of a text entry screen. To change the
text entry mode while composing a text message:
䊳
Repeatedly press and hold
to toggle between Abc,
123, and T9Word modes.
Or, do the following:
1.
Press the Left soft key.
2.
Highlight one of the following text entry modes:
• T9Word
• Abc
• ABC
• 123
• Symbols
3. Press
.
Entering Text
26
Using T9® Mode
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
1.
Using Abc Mode
1.
While composing a text message, press the Left soft key.
Select Abc or ABC.
While composing a text message, press the Left soft key.
2.
Select T9Word.
2.
Note: To enter a space, press the
key. To enter a period, press the
key. These key functions apply to both T9 Word and Abc modes. (For
other symbols, see “Entering Symbols” on page 28..)
Enter characters while in Abc mode by pressing a key
For practice, enter the word “Samsung” by pressing each
repeatedly until the desired character appears in the
of the following keys only once:
display.
Example: Press
S
A
M
S
U
N
G
3.
If more than one word shares the same numeric sequence,
T9 Word provides the most commonly used word. Press
to display other words, if available.
27
Pause briefly and the displayed character is accepted and
inserted into your message.
T9 Word recognizes that the most commonly used word for
the numeric sequence you just entered is “Samsung.”
once for “G” and twice for “H”.
4.
Press
period.
to enter a space and press
to enter a
Entering Numbers
Enter numbers into a text message while in 123 mode.
1.
While composing a text message, press the Left soft key.
Select 123.
2.
Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message.
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
1.
While composing a text message, press the Left soft key,
Select Symbols. The first of three symbol screens appears
in the display.
2.
Use the Prev and Next soft keys to page through the other
3.
Press the key that corresponds with the symbol that you
symbols, if desired.
wish to enter.
Example: Press
4.
for an exclamation point (!).
Repeat these steps to insert additional symbols into your
message.
Entering Text
28
Section 6: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
• Group — Rename one of your five Contacts groups.
• Memory Info — View available memory for dial entries.
2. Select the Contacts sub-menu or option of your choice.
Tip: You can also access a sub-menu or menu option by pressing the
number key corresponds to the menu item number. For example, select
Add New Entry.
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Using the Contacts Add Option
1.
Entry. The Add New Entry screen appears in the display
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call
numbers stored in your Contacts list faster. (See page 17.)
Open Your Contacts List
1.
with the Name field highlighted.
2.
on page 26.)
Contacts sub-menus and options appear in the display:
29
Enter a name or phrase to associate with the type using
the keypad. (For more information, refer to “Entering Text”
In standby mode, press MENU ➔ Contacts. The following
• Find — Find a phone number by entering a Contact name.
• Add New Entry — Add a number or e-mail to your Contacts.
• Speed Dial — Assign speed dial numbers to your Contacts.
In standby mode, press MENU ➔ Contacts ➔ Add New
3.
4.
Use the Up/Down navigation keys to highlight each field.
Enter a phone number (Mobile, Home, or Work,) or an email address (E-Mail) for the new Contacts entry.
5.
If desired, assign the new Contact to a Group. This lets you
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
send messages to and find this Contact and other related
contacts. (For more information, refer to “Group” on
page 33.)
6.
Tip: You can also store a phone number from standby mode by entering the
number, and pressing the Save soft key.
If desired, select a unique Ringtone to identify this new
Contact. (For more information, refer to “Ringer Type” on
7.
Creating a new Contacts entry:
3.
page 62.)
Fax) for the new Contacts entry.
8.
Press SAVE (
) to save the new Contacts entry.
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
4.
After you press
available) appear in the display.
2.
Press the Save soft key. The Save screen appears in the
Home
Pager
Fax
Work
Select the number type that matches your new entry. The
number being saved populating the selected number type
field. (For more information on creating a new Contacts
entry, see “Using the Contacts Add Option” on page 29.)
to end your call, the call time, length
of call, phone number, and name of the other party (if
Mobile
Add New Entry screen appears in the display with the
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1.
Select Create New. The following (number type) icons
appear in the display:
If desired, enter an additional phone number (Pager or
Adding the number to an existing Contacts entry:
5.
Select Update Existing. The Update Existing screen
appears in the display showing your current Contacts list.
display showing the following options:
Understanding Your Contacts
30
6.
Enter the first few characters of the Contacts entry name
2.
following Calls logs:
information on finding a Contacts entry, see “Finding a
• Press
for Outgoing Calls
• Press
for Incoming Calls
• Press
for Missed Calls
• Press
for All Calls
• Press
for Call Timer
• Press
for Data Counter
A list of your calls appears in the display.
Contacts Entry” on page 32.)
7.
Select the desired Contacts entry. The following (number
type) icons appear in the Update Existing screen:
8.
Mobile
Home
Pager
Fax
Work
Select the appropriate unassigned number type. The Edit
Contact screen appears in the display.
9.
Make any added changes you wish to the Contacts entry.
(For more information, see “Editing an Existing Contact
Entry” on page 33.)
10. Press SAVE (
) to save the entry.
Storing Number from a Calls Log
You can store numbers from the Calls logs to your Contacts.
1.
Press the corresponding number on the keypad to view the
under which you will store the saved number. (For more
In standby mode, press MENU ➔ Calls.
3.
Highlight the number you wish to store in Contacts.
4.
Press the Options soft key. The following options appear in
the display:
• Save — Saves the selected number to your Contacts list.
• Details — Contacts calls only — Lets you view the Contacts entry
for the recipient of this call.
• Erase — Deletes the selected number from the selected Calls log.
• Lock / Unlock — Prevents/allows deletion of the selected
number.
• Erase All — Deletes all numbers from the selected Calls log.
• View Timer — Shows the call times for the Last Call, All Calls,
Home Incoming, Home Outgoing, Roaming Calls, Last Reset, and
Lifetime Calls timers for the selected Calls log.
5. Select Save. The following options appear in the display:
• Create New — Lets you create a new Contacts entry.
31
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 30.
Finding a Contacts Entry
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find and
Quick Search let you locate the entry quickly.
1.
In standby mode, do one of the following:
• Press the Contacts soft key.
• Press MENU ➔ Contacts ➔ Find.
The Find screen appears in the display with an alphabetical
list of Contacts showing.
Tip: If you have Quick Search enabled, from standby mode, you can press
number keys that correspond to the first few letters of a Contact name,
press the Up navigation key, then skip to Step 3. (For more information,
refer to “Quick Search” on page 70.)
2.
Enter the first few characters of the name of the contact as
it appears in your Contacts list.
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
3.
When the desired Contacts entry is listed in the display,
highlight the contact using the Up/Down navigation keys (if
necessary). Then, do one of the following:
• Use the Left/Right navigation keys to select a number associated
with the named Contact.
• Press
to dial the number associated with the named Contact.
• Press the Edit soft key to change the information about the
Contact.
• Press VIEW (
) to show information about the Contact.
• Press the Options soft key. The following options appear in the
display:
– New Contact — Lets you add a new number to your Contacts list or to
the selected Contact.
– Erase — Lets you delete the highlighted Contact.
– Send Text Msg — Lets you send a text message to the selected
contact.
– Send Name Card Via Bluetooth — Lets you send the selected
Contact to a Bluetooth device.
– Call — Lets you place a call to the highlighted Contact.
Understanding Your Contacts
32
4.
Select the desired option to enter that option’s sub-menu.
1.
Group
Contacts list entry you wish to find (such as the area code
This option lets you find a Contacts list entry with a specific
Group name.
1.
or area code and exchange — for example, 888-987).
2.
In standby mode, press MENU ➔ Contacts ➔ Group. The
3.
Select the name of the group you wish to browse. The
contain the entered digits.
3.
Highlight the desired Contacts entry (if necessary). Then do
selected Group list appears in the display.
one of the following:
Find and highlight the desired Contacts entry, then do one
• Press
to dial the highlighted number.
• Press
to display information about the Contacts entry
associated with the highlighted number. From the View Contact
screen, you can erase or edit the selected Contacts entry.
of the following:
• Press the Remove soft key to delete the selected contact from the
Group. (Does not apply to No Group.)
• Press
to ADD an existing contact entry to the selected Group.
(Does not apply to the General group.)
• Press the Options soft key. The following options appear in the
display:
– Send Text Msg — Lets you send a text message to selected
contact(s) in the current group.
4. Press
to enter that option’s sub-menu.
Search by Number
This option lets you find a Contacts list entry by one of its phone
numbers.
33
Press Options ➔ Search. The Find screen appears in the
display listing all phone numbers in your Contacts list that
Group List screen appears in the display.
2.
In standby mode, enter the first few numbers of the
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 32.)
2.
Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
3.
Use the Up/Down navigation keys to highlight a number
stored in this contact entry.
4.
Press
to backspace and delete numbers.
5.
Press and hold
to clear all numbers in the highlighted
field.
Note: You can also add numbers (such as a Pager number or a Fax number)
to the entry, assign it to a Group, and add other information.
6.
When you’re finished editing the entry, press
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
Store Pauses in a New Contacts Entry
1.
changes are saved and a confirmation message appears in
2.
the display.
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• 2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
• Wait — A hard pause stops the calling sequence until further input
from you.
In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
. Your
Press the Options soft key. The following menu options
appear in the display:
• Search — Lets you find Contacts list entries by their phone
numbers.
• 2-Sec Pause — Adds a two-second pause.
• Wait — Adds a hard pause (awaits input from you).
• Send Text Msg — Lets you send a text message to the entered
number.
3. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
4.
When you’re finished entering the number and pauses,
press the Save function key to store the number in your
Contacts.
Understanding Your Contacts
34
Add Pauses to an Existing Contacts Entry
1.
information, refer to “Finding a Contacts Entry” on
page 32.)
2.
Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
3.
Highlight a number stored in this contact entry.
4.
Use the Navigation key to place the cursor where you want
5.
7.
to save
Assigning Speed Dial Numbers
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options popup menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact’s Speed Dial
number.
1.
Find the desired entry in the Contacts list. (For more
to add a pause (usually at the right-hand end of the
information, refer to “Finding a Contacts Entry” on
number).
page 32.)
Press the Options soft key. The following menu options
2.
appear in the display:
• Set Speed Dial — lets you assign a Speed Dial number to this
Contacts entry.
• Set As Default — your phone automatically dials this number
when you find this Contacts entry and press the
key.
• Wait — a hard pause (awaits input from you).
• 2-Sec Pause — a two-second pause.
6. Select the pause option of your choice to enter it into your
number sequence.
35
When you’re finished adding pauses, press
your changes to the number in your Contacts.
Find the desired entry in the Contacts list. (For more
Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
3.
Use the navigation keys to highlight a number stored in
this contact entry.
Note: If a contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you Speed Dial that Contact.
4.
Press the Options soft key.
The following menu options appear in the display:
• Set Speed Dial — Lets you assign a Speed Dial number to this
Contacts entry.
• Set as default — Your phone automatically dials this number
when you Find this Contacts entry and press .
• Wait — A hard pause (awaits input from you).
• 2-sec Pause — A two-second pause.
Select Set Speed Dial is highlighted. The Speed Dials
page 32.)
2.
in the display with the contact name highlighted.
3.
Enter, or use the Navigation key to select, an unassigned
Press
to assign the new Speed Dial number to the
selected Contact. You are prompted to confirm the
7.
to add the number or e-mail address to the
existing entry.
Edit an Existing e-mail Address
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
Press the Yes soft key to assign the selected Speed Dial
page 32.)
Press
2.
Add a Number or E-Mail Address to an Existing Entry
Find the desired entry in the Contacts list. (For more
Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
to save the new Speed Dial number
assignment.
1.
Press
assignment.
number. The Edit Contact screen appears in the display.
8.
Enter the phone number or e-mail address for the new
Contacts entry.
5.
Speed Dial number.
6.
Highlight a number field or e-mail field in this contact
entry.
4.
screen appears in the display.
5.
Press the Edit soft key. The Edit Contact screen appears
3.
Highlight the E-Mail field (labeled with the @ symbol).
4.
Use the keypad to edit the E-Mail address. (For more
information, refer to “Entering Text” on page 26.)
information, refer to “Finding a Contacts Entry” on
Understanding Your Contacts
36
• To insert the @ symbol, do the following:
– Press the abc soft key. A pop-up menu appears in the display with Abc
highlighted.
– Select Symbols.
– Select the @ symbol.
– Enter the remainder of the e-mail address using the keypad. (For more
information, refer to “Entering Text” on page 26.)
• To add the domain type to the end of the e-mail address, do the
following:
– Press the abc soft key. A pop-up menu appears in the display with Abc
highlighted.
– Select Shortcuts.
– Select the desired domain type (such as, .com, .net, or .edu).
5. Press
to save your changes.
Speed Dial Numbers
You can assign and change Speed Dial numbers for Contacts
entries.
1.
Enter a Speed Dial number in the Go To field or use the
navigation keys to highlight a Speed Dial number.
3.
Press SET (
). The Set Speed Dial screen appears in
the display.
4.
Enter a Contact name or use the navigation keys to
highlight a Contact entry.
5.
Press
. You are prompted to confirm the new Speed
Dial setting.
6.
To save the new setting, press the Yes soft key. To discard
the new setting, press the No soft key.
Renaming a Contacts Group
Use this option to rename a group in your Contacts list.
1.
In standby mode, press MENU ➔ Contacts ➔ Group. A list
of group names (like the following list) appears in the
In standby mode, press MENU ➔ Contacts ➔ Speed Dial.
display:
The Speed Dial list appears in the display.
•
•
•
•
•
Tip: You can also assign a Speed Dial number when creating or editing a
Contacts entry. For more information, refer to “Assigning Speed Dial
Numbers” on page 35.
37
2.
No Group
Business
Colleague
Family
Friends
page 32.)
Note: You cannot rename No Group.
2.
2.
Highlight the group (other than No Group) that you wish to
rename, then press the Options soft key. The following
the erasure.
3.
options appear in the display:
• Send Text Msg — Lets you send a text message to all contacts in
the selected Group.
• Rename — Lets you change the name of the selected Group.
• Erase — Lets you delete the selected Group (this does not delete
the related Contacts).
• Add — Lets you add a new Group.
3. Select Rename.
4.
The Rename Group screen appears in the display. The
Press Options ➔ Erase. The phone prompts you to confirm
To erase the selected Contacts entry, press the Yes soft
key. To retain the Contacts entry, press the No soft key.
Memory Info
Use the Memory sub-menu to view the amount of Contacts
entries you have stored, as well as the remaining memory.
䊳
In standby mode, press the MENU ➔ Contacts ➔ Memory
Info. The amounts of memory used and remaining for
Contacts entries appear in the display.
current name of the selected group shows with a flashing
cursor at the end of the name.
5.
Enter a new group name using the keypad. (For more
information, refer to “Entering Text” on page 26.)
6.
Press
to save the changed group name.
Deleting a Contacts Entry
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
Understanding Your Contacts
38
Section 7: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
• To select a mobile number or e-mail address using your Contacts
list, press the Add soft key. The following options appear in the
display:
– Contacts
– Groups
– Recent Calls
The Contacts option is highlighted.
Press
. The Add Contacts screen appears in the display. See
“Finding a Contacts Entry” on page 32 for more information on
finding a contact.
Use the Up and Down navigation keys to highlight a contact. Use the
Left and Right navigation keys to select a phone Number or E-mail
address for the highlighted Contact. Press
to mark your selection.
To add the selected contacts to the Send To list, press the Done soft
key. The Create Txt Msg screen appears in the display.
• To enter recipient e-mail address(es), press and hold the
key
to change the text entry mode from 123 to T9 word or abc. (For
more information, refer to “Add a Number or E-Mail Address to
an Existing Entry” on page 36.)
Press the Down navigation key to select additional Send To
Accessing Your Messages
䊳
To access the Messages menu from standby mode, do
one of the following:
• Press the Messages shortcut (Up navigation) key.
• Press MENU ➔ Messages.
The Messages menu appears in the display.
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text messages, picture messages, and video messages.
Creating and Sending a Text Message
1.
From the Messages menu, select Send Message. The
Create Txt Msg screen appears in the display showing the
Send To list.
2.
entering number(s) or e-mail address(es) of message
recipient(s):
39
fields, as needed.
Address your message by selecting contacts and/or
3.
When you are finished addressing your message, press
. The Text field appears in the display.
4.
Enter the text for your message using the keypad. (For
1.
more information, refer to “Entering Text” on page 26.)
• To change the text input method, do one of the following:
– Repeatedly press and hold the
key until the desired text input
method is indicated by the left soft key label.
– Press the Left soft key, use the navigation keys to select the desired text
.
input method, and press
• Press the Left soft key to select one of the following text entry
methods:
– T9 Word
– Abc
– ABC
– 123
– Symbols
5. At any point while composing a message, you can set
message send options by pressing the Options soft key.
(For more information, refer to “Message Send Options”
soft key. The following are Send Options that can appear in
the display (which options appear depends on what type of
message you composed and what message field you have
highlighted):
• Preset Msgs — Lets you add pre-composed text to a message.
• Save As Draft — Saves this message in the Drafts folder.
• Save As Preset — Saves the text of this message as a Preset
Message.
• Add To Contacts — Lets you add the addressee numbers or Email addresses to your Contacts list.
• Delivery — Lets you set Message Receipt (On/Off), message
Priority (Normal/Urgent), and whether to include your Callback
Number or Signature in a message.
• Cancel Msg — Lets you stop composition of this message
without sending it. (You are prompted to save the message in the
Drafts folder.)
2. Use the Navigation key to display the various Send
on page 40.)
6.
Once you’re finished composing your message, press
SEND (
) to send your message.
Message Send Options
After you’ve composed a text message, press the Options
Options for each menu item.
3.
When the desired send option is highlighted, press
to
confirm the selection or to enter the send option’s submenu.
You can set priority, validity, and other options before you send a
message.
Messaging
40
Receiving New Messages
When you receive a message in standby mode, an alert sounds
(unless turned off) and a New Message notification appears in
the display along with the closed envelope icon (
).
The date and time of the message and the following options also
appear in the display:
• View Now — Opens the message where you have the option to
Forward, Reply With Copy, Save Preset Msg, Lock/Unlock, Add To
Contacts, Extract, or Message Info.
• View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Select the desired option.
Voicemail
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
Voicemail Setup
Before callers can leave voice mail messages, you must first set
up your account. See “Setting Up Your Voicemail” on page 6 and
“Message Settings” on page 45 for more information.
Checking your Voicemail
1.
Select the desired option.
41
until you’re
connected to the voice mail system. A recorded message
Receive Messages While in a Call
When you receive a message while in a call, a New Message
notification appears in the display along with the closed envelope
icon (
). The date and time of the message and the following
options also appear in the display:
• View Now — Opens the message where you have the option to
Forward, Reply With Copy, Save Preset Msg, Lock/Unlock, Add To
Contacts, Extract, or Message Info.
• View Later — Closes the popup and saves the message to your inbox
where you can view it later.
In standby mode, press and hold
prompts you for a password.
2.
Enter your password, then follow the recorded prompts, to
listen to your voice message, change administrative
options, and so on.
Tip: You can also access your Voicemail by using the entries in the Voicemail
folder. For more information, refer to “Voicemail” on page 44.
Message Folders
Inbox
Received messages of all types (except Voice Mail) are stored in
the Inbox.
1.
From the Messages menu, select Inbox, to open the
Inbox folder.
2.
Use the navigation keys to highlight a message, then do
one of the following:
• Press the Erase soft key to delete the message.
• Press OPEN (
) to view the highlighted message, then proceed
to Step 3.
• Press the Options soft key. The following options appear in the
display:
– Reply — Lets you reply to a message.
– Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
– Forward — Lets you forward the message to other e-mail addresses
or mobile phone numbers.
– Lock / Unlock — Blocks or allows erasure of the selected message.
– Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
– Erase Inbox — Deletes all messages from the Inbox folder.
– Message Info — Lets you display status information about a
message.
Select an option to perform its function.
• Press
to return to the Messages menu.
3. While viewing a selected message, do one of the following:
• Press the Erase soft key to delete the message.
• Press the REPLY (
) to compose and send a message to the
sender of the highlighted message.
• Press the Options soft key. The following options appear in the
display:
– Forward — Lets you forward the message to other e-mail addresses
or mobile phone numbers.
– Reply With Copy — Lets you reply to a message and include a copy
of the original message.
– Save Quick Text — Saves the message text as a Preset Message
entry.
– Lock / Unlock — Block or allow changes to the selected message.
– Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
– Message Info — Lets you display status information about a
message.
– Extract — Lets you call the originator of the message.
Select an option to perform its function.
• Press
to return to the Inbox list.
Messaging
42
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
more information, refer to “Lock Phone” on page 66.)
Outbox
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
Tip: Verify whether and when a message or e-mail was successfully
received by enabling the Delivery Ack message send option. (See
“Message Send Options” on page 40 for more information.)
1.
From the Messages menu, select Outbox. A list of your
2.
Use the navigation keys to highlight a message, then do
outgoing messages appears in the display.
one of the following:
• Press the Erase soft key to delete the message.
• Press OPEN (
) to view the highlighted message, then proceed
to Step 3.
• Press the Options soft key. The following options appear in the
display:
– Forward — Send the message to another addressee.
43
– Resend — Re-send the message.
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
– Erase Outbox — Erase all messages in the Outbox folder.
– Message Info — Lets you display status information about picture
messages.
Select an option to perform its function.
• Press the
key to return to the Messages menu.
3. While viewing a selected message, do one of the following:
• Press the Erase soft key to delete the message.
• Press the RESEND (
) key to resend a message to the original
addressee.
• Press the Options soft key. The following options appear in the
display:
– Forward — Send the message to another addressee.
– Save Quick Text — Save the message text in the Preset Msg folder.
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
– Message Info — Lets you display status information about picture
messages.
– Extract — Lets you call the recipient of the message.
Select an option to perform its function.
• Press
to return to the Outbox list.
Drafts Folder
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
1.
addressees as needed, then press
• Press the Erase soft key to delete the message.
• Press EDIT (
) to view and edit the highlighted message.
• Press the Options soft key. The following options appear in the
display:
– Send — Send the message to the current addressee(s).
– Lock / Unlock — Block/permit erasure of a message.
– Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
– Save Preset Msg — Save the message text in the Preset Msg folder.
– Erase Drafts — Erase all unlocked messages in the Drafts folder.
Select an option to perform its function.
• Press
to return to the Messages menu.
. The Text field
appears in the Create Txt Msg screen.
4.
Use the keypad to change or add message text. (For more
information, refer to “Entering Text” on page 26.)
5.
Once you’re finished composing your message, do one of
the following:
Use the navigation keys to highlight the message that you
wish to edit, then do one of the following:
If you press EDIT, the Create Txt Msg screen appears in the
display showing the addressee fields. Change or add
From the Messages menu, select Drafts. A list of your
draft messages appears in the display.
2.
3.
• Press SEND (
) to send your message.
• Press the Options soft key to access additional message options.
(For more information, refer to “Message Send Options” on
page 40.)
• Press
to exit the message. You are prompted to save your
changed message to the Drafts folder.
Voicemail
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
1.
From the Messages menu, select Voicemail. A Voicemail
status screen indicating the number of new messages in
your voice mailbox, their urgency, and any callback
Messaging
44
numbers appears in the display.
2.
Press
2.
delete. You are prompted to confirm the erasure of all
to call your voice mailbox and listen to your
messages in the folder.
voice messages.
Note: You can, in standby mode, also press and hold
mailbox.
to dial your voice
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messages
menu, open the message folder where the message to be deleted is
stored, then select and delete the message from the Option menu
while viewing the message content.
1.
From the Messages menu, select Erase Messages. The
following options appear in the display:
•
•
•
•
45
Select the folder containing the messages that you wish to
Inbox — Lets you delete all messages from your Inbox.
Outbox — Lets you delete all messages from your Outbox.
Drafts — Lets you delete all draft messages from the Drafts folder.
All Messages — Lets you delete all messages from all message
folders.
3.
To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.
Message Settings
The Msg Settings menu lets you define numerous message
settings such as notification types and save options.
1.
From the Messages menu, select Msg Settings. The
following Msg Settings options appear in the display:
• Notification — Lets you choose whether to be notified of a new
message by the appearance of an on-screen message and the new
message icon or by the Icon Only.
• Auto Save — Lets you set whether to automatically save to the
Outbox folder, to discard, or to prompt you to save unsent
messages when you exit them.
• Auto Erase — Automatically erase the oldest read message after
memory is full.
• Auto View — Automatically displays the message.
• Entry Mode — Lets you set the default text entry mode [T9 Word,
Abc/ABC (alphabetical), or 123 (numerical)] for composing
message text.
• CB# — Lets you disable, enable, and update the callback number
that can be inserted in outgoing messages.
• VM# — Lets you update your Voicemail access number.
• Signature — Lets you disable, enable, and update the text
signature that can be inserted in outgoing messages.
• Preset Msgs. — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
• Auto Scroll — When set to On, the phone automatically scrolls
message text, letting you see the complete message text without
using the Navigation key.
• Messaging Font Size — Lets you set the messaging font size.
2. Select the desired setting sub-menu to access it and select
the desired value(s).
Messaging
46
Section 8: Browser
This section outlines how to launch Browser, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
Browser
With Browser, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Browser, your phone connects to the Internet and the
service indicator icon (
) appears in the display.
Stored Web Content
Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching Browser
1.
In standby mode, do one of the following to launch
Browser:
• Press the Left navigation key.
47
• Press MENU ➔ Browser ➔ Go to Web.
Note: The first time you launch Browser, the warning message “Browse &
Download use airtime.” pops up in your display. To have this
message repeat the next time you launch Browser, press the Continue
soft key. To stop this message repeating, press the Remove soft key.
A list of categories (each representing one or more web
sites) appears in the display.
2.
Use the navigation keys to browse the categories.
3.
Once the desired category is highlighted, press the
soft key to enter the category list.
Exit Browser
䊳
Press
to exit Browser.
Using Browser
When you use Browser, some of the keys operate differently than
during a normal phone call. Browser presents on-screen items in
any of the following ways:
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft keys.
Browser soft keys
The bottom of the Browser display is a bar that contains browser
commands. The Left and Right (
) soft keys on the
keypad are used to execute the command that appears above
them in the display. These are called “soft keys” because their
function changes depending on the application.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key to select a link when it is highlighted.
How Browser Keys Work
The following table lists Browser keys and their functions.
Asterisk/Shift Key — Press before entering text to
enable uppercase characters.
Last Key — Press to enter a zero (0), or to move to the
last item in a menu.
Pound/Space Key — Press to insert a space when
entering text.
Number 1 thru 9 — Use the number keys to select
items in a menu if they are numbered.
End Key — Press to exit the Browser and return the
phone to standby mode.
Left Soft Key — Press to activate the command that
appears above it in the display.
Right Soft Key — Press to activate the command
that appears above it in the display.
Navigation keys — Use to browse lists and options.
BACK Key — A browse, back-up key. Press once to
back up one page. Press and hold to go back to home
page. Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the
display.
Browser
48
Section 9: Games & Apps
This section explains the Games & Apps features where users
can download multimedia, applications, games, and check news
and sports.
Finding Applications
With Games & Apps, you can download full featured applications
over the air including games, personalized ring tones, pictures,
and more.
1.
In standby mode, do one of the following to launch Games
& Apps:
• Press the Right navigation key.
• Press MENU ➔ Games & Apps ➔ Games & Apps.
Note: The first time you launch Games & Apps, the warning message
“Browse & Download use airtime.” pops up in your display. To have
this message repeat the next time you launch Games & Apps, press
the Continue soft key. To stop this message repeating, press the
Remove soft key.
The Games & Apps screen appears in the display with the
Games & Apps icon (
following options:
49
) highlighted. You have the
• Press
. The Games & Apps menu appears in the display.
You can use the items in this menu to browse or search for,
purchase, and download applications.
• Use the navigation keys to select an application on your phone that
you wish to launch.
Section 10: Tools/Utilities
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
Tools/Utilities Menu
Tools is a suite of Personal Information Management (PIM)
applications such as a Calendar, To Do List, and Memo Pad that
run on your phone. You can use your phone to schedule events,
set reminders, create a to do list, perform calculations, and more
with the functions provided by this useful feature.
Opening Tools/Utilities Menu
1.
In standby mode, press MENU ➔ Tools & Settings ➔
Tools/Utilities. The following sub-menus appear in the
display:
• Calendar — Lets you view the current, past, or future month in a
monthly calendar layout.
• Memo Pad — Lets you store and review useful information.
• Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
• World Time — Lets you view the current time of day or night in
another part of the world.
• Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
• Stop Watch — Lets you view the amount of time.
• Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
• Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of keypresses.
2. Select the desired application.
The following sections provide detailed descriptions of the
applications and how to use their functions.
Calendar
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
View an event
1.
From the Tools/Utilities menu, select Calendar.
A calendar appears in the display with the current date
highlighted. The month and year also appear.
2.
Use the Navigation key to move around within the calendar
screen.
Tools/Utilities
50
The following controls are also available:
•
•
•
•
•
Press the Add soft key to add an event to the highlighted date.
Press
to open the highlighted date.
To view previous months, press the Volume key (
) Up.
To view future months, press the Volume key (
) Down.
Press the navigation keys to move to an individual day, one day or
one week at a time.
• Press the Options soft key while viewing the calendar. The
following options appear in the display:
– Go to Date — Lets you jump to any date you specify.
– Go to Today — Lets you jump to any date you specify.
– Erase Old — Lets you erase past events.
– Erase all — Lets you erase all events.
Select the desired option to perform the related process.
Add a New Event
1.
From the Tools/Utilities menu, select Calendar.
A calendar appears in the display with the current date
highlighted. The month and year also appear.
2.
3.
Use the Left/Right navigation keys to change between AM and PM.
Tip: You can also press
4.
for AM or press
for PM.
When you’re finished entering event details, press
to
store the event in your calendar.
Note: If you set a notification Alert, an alert (tone/vibration/light only) will
notify you prior to the event.
Memo Pad
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
Add a Memo
1.
From the Tools/Utilities menu, select Memo Pad.
Highlight the date of the new event, then press the Add
If you have any stored memos, they appear as a list in the
soft key. The New Event screen appears in the display.
display. If this is your first time in Memo Pad, “No memos”
Use the Navigation key and the keypad to select and enter
appears in the display.
details of the event. (For more information, refer to
“Entering Text” on page 26.)
51
Note: Enter the dates and times for the event using 2 digits for day, month,
hour, and minute entries. Use 4 digits for year entries.
2.
To add a new memo, press the Add soft key. A numbered
Memo screen appears in the display.
3.
Enter a memo using the keypad. (For more information,
refer to “Entering Text” on page 26.)
4.
When you’re finished entering details for the memo, press
to save your memo.
View, Edit, and Erase Memos
䊳
From the Tools/Utilities menu, select Memo Pad, then
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
1.
From the Tools/Utilities menu, select Alarm Clock. The
following options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Use the navigation keys to highlight an Alarm selection,
highlight a memo.
then press
• To view the memo, press VIEW (
).
• To edit the memo you are viewing, press the Edit soft key.
• Edit the memo using the keypad. (For more information, refer to
“Entering Text” on page 26.)
• To erase the memo you are viewing, press the Options soft key,
then select Erase. You are prompted to verify the erasure.
– To erase the memo, press the Yes soft key.
– To keep the memo, press the No soft key.
containing the following options:
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
. A Set Alarm screen appears in the display
• Alarm — Turns the alarm Off or On.
• Time — Use the numeric keys to enter the time, and use the Left
and Right navigation keys to select AM or PM.
• Frequency — Lets you repeat the alarm Daily, Mon. – Fri.,
Weekends, or Once.
• Ringer — Lets you set the alarm ringer to a particular Tone, to
Vibrate, or to Light Only.
Use the Up and Down navigation keys to select options,
and use the Left and Right navigation keys to select values
for the options.
Use the keypad to enter the time for the alarm.
Tools/Utilities
52
3.
When you’re finished press
alarm icon (
. The alarm is set and the
) appears in the top line of the display.
When an Alarm Sounds
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
䊳
• If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
• If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in
the top of the display.
• If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
• If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Disabling Alarms
Turn Off the Alarm
Turning an Alarm to Off allows you to retain the current settings
for later reuse.
From the Tools/Utilities menu, select Alarm Clock. The
following options appear in the display:
• Alarm 1
53
screen appears in the display with the Alarm option
highlighted.
3.
Use the Left/Right navigation keys to select Off, then press
. The selected alarm is turned off.
Use the navigation keys to highlight Dismiss, then press
to silence the alarm.
1.
• Alarm 2
• Alarm 3
2. Select an active Alarm selection. The associated Alarm
Reset the Alarm(s)
1.
From the Tools/Utilities menu, select Alarm Clock. The
following options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Highlight an active alarm.
3.
Press the Options soft key. The following options pop-up
in the display:
• On / Off — Enables/disables the highlighted Alarm using the
current settings.
• Reset Alarm — Disables the highlighted Alarm and resets its
settings to default values.
• Reset All — Disables all Alarms and resets all of their settings to
default values.
4.
Use the navigation keys to highlight the desired option,
then press
.
World Time
2.
Athens
Helsinki
Jerusalem
Moscow
Baku
Abu Dhabi
Tashkent
New Delhi
Alma-ata
Bangkok
Jakarta
Hong Kong
Beijing
Seoul
Tokyo
Guam
Sydney
Okhotsk
Wellington
Samoa
Midway
HAST/
HADT:
AKST/AKDT:
World Time. A world map appears in
the display.
Honolulu
World Time lets you view the time of day or night in another part
of the world. World Time displays time in any of 45 different cities
and/or time zones around the world.
1.
Berlin
From the Tools/Utilities menu, select
Use the Left/Right navigation keys to
PST/PDT:
MST/MDT:
CST/CDT:
display the time zone and city that
Seattle
San Francisco
Los Angeles
Denver
Arizona
Dallas
Chicago
Houston
Mexico City
you wish to view.
The following time zones/cities are supported:
EST/EDT:
Caracas
Brasilia
Mid Atlantic
3.
Detroit
Washington
D.C
New York
Montreal
Boston
Cape Verde
Alaska
Press the Options soft key and select to display (DST On)
or not display (DST Off) Daylight Savings Time (DST) for
the selected time zone.
4.
Do one of the following:
• To set the selected time zone as the home time zone for your
phone, press
.
London
Paris
Rome
Tools/Utilities
54
• To return to the Tools menu without setting a new home time zone,
press
.
Calculator
You can perform calculations, including addition, subtraction,
multiplication, and division using your phone.
1.
From the Tools/Utilities menu, select Calculator. The
For additional equation entry options, press the Operator
soft key. The following options appear in the display:
• ( — Beginning of nested equation
• ) — End of nested equation
• Power — Raise the entered number to a power
5. Press
to perform the calculation and view the result.
Calculator appears in the display.
2.
Enter the first number in your equation using the keypad
(numbers can be up to nine digits long).
• Press
to enter a decimal point. (Calculator only accepts 2
digits after a decimal point.)
• Press
to change the sign for a number to a negative.
3. Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
• Up navigation key — [x] Multiplication
• Left navigation key — [-] Subtraction
• OK key — [=] Equals/Total
• Right navigation key — [+] Addition
• Down navigation key — [÷] Division
4. Use the keypad to enter the second number into your
equation.
55
To perform another calculation, press the Clear soft key.
Stop Watch
You can use this menu to set a stop watch.
1.
From the Tools/Utilities menu, select Stop Watch.
2.
To start, stop, and resume the stopwatch count, press
3.
At the start of each succeeding event/lap, press the
.
Record (
) to record the completion time for the
previous event/lap.
4.
To erase all stop watch (lap) times recorded, press the
Reset soft key.
Converter
Currency — Reviewing/Editing Exchange Rates
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
To convert a currency, length, weight, volume, area, or
temperature, do the following:
1.
From the Tools/Utilities menu, select Converter and the
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1.
Currency.
2.
Use the Navigation key to select the units to be converted
3.
4.
Use the Up/Down navigation keys to highlight the currency
Exchange Rate to be changed.
5.
Press EDIT (
). The EDIT EXCHANGE RATE screen
appears in the display.
Enter the quantity you want converted in the From field.
6.
Use the keypad to change the exchange rate. (For more
information, refer to “Entering Numbers” on page 28.)
The converted quantity appears in the To field.
Note: To include a decimal point, press
Use the Left/Right navigation keys to display the Exchange
Rate list for the currency to be converted From.
From and To.
3.
Press the Rate soft key. The Exchange Rate list for the
USD currency appears in the display.
conversion feature you wish to use.
2.
From the Tools/Utilities menu, select Converter ➔
7.
Press
to save the changed exchange rate.
8.
Press
to return to the Currency Converter screen.
.
Tools/Utilities
56
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
1.
8.
currency using the keypad. (For more information, refer to
“Entering Numbers” on page 28.)
Note: Press
From the Tools/Utilities menu, select Converter ➔
Press the Rate soft key. The Exchange Rate list for the
USD currency appears in the display.
3.
Press the Add soft key. The ADD EXCHANGE RATE screen
appears in the display with the Base field highlighted.
4.
Use the Left/Right navigation keys to select the Base
currency to be converted from.
5.
6.
9.
1.
Press the Down navigation key to highlight the Exchange
Rate field.
57
From the Tools/Utilities menu, select Converter ➔
Currency.
2.
Press the Rate soft key. The Exchange Rate list for the
USD currency appears in the display.
3.
Use the Up/Down navigation keys to highlight the currency
exchange rate to be erased.
“Entering Text” on page 26.)
7.
) to save the new exchange rate.
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
Enter an identifier of up to 5 characters for the new
currency using the keypad. (For more information, refer to
Press SAVE (
Currency — Erasing Exchange Rates
Press the Down navigation key to highlight the Currency
field.
to enter the decimal point.
The Exchange Rate field only accepts two digits after the decimal
point.
Currency.
2.
Enter a decimal exchange rate (up to 5 digits) for the new
4.
Press the Erase soft key. You are prompted to confirm the
erasure.
5.
To erase the selected exchange rate, press the Yes soft
5.
key.
To return to the Exchange Rate list without erasing the
Paying field.
6.
Use the keypad to enter the number of persons paying.
(For more information, refer to “Entering Numbers” on
selected exchange rate, press the No soft key.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
If needed, press the Down navigation key to highlight the #
page 28.)
7.
Press
. The amount of the Tip, the bill Total, and the
amount Each person should pay appear in the screen.
Calculations are based on the total amount of the check, a
selected percentage, and the number of people paying.
1.
From the Tools/Utilities menu, select Tip Calculator. The
Tip Calculator screen appears in the display with the Bill
field highlighted.
2.
Use the keypad to enter the total amount of the bill. (For
more information, refer to “Entering Numbers” on
page 28.)
3.
If needed, press the Down navigation key to highlight the
Tip field.
4.
Use the keypad to enter a tip percentage. (For more
information, refer to “Entering Numbers” on page 28.)
Tools/Utilities
58
Section 11: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
Accessing Your Settings
䊳
• Press the Settings soft key.
• Press MENU ➔ Tools & Settings ➔ Settings.
The Settings menu appears in the display.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
At the Settings menu, select Location.
The following options appear in the display:
• Location on — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
59
• 911 Only — GPS location setting is on only when you dial 911.
Use the navigation keys to highlight the option you want.
3.
Press
To access your phone’s settings from standby mode, do
one of the following:
1.
2.
to select the desired Location setting. You’re
returned to the Settings menu.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
1.
At the Settings menu, select Display Settings. The
following options appear in the display:
• Menu Style — Lets you choose whether the Main Menu appears
as a matrix of icons or as a list of menus.
• Wallpaper — Lets you choose the picture(s) that display(s) on your
phone when in standby mode.
• Clock Format — Lets you choose whether to show the time in the
display in a large digital or analog format, or to turn it off.
• Dialing font size — Lets you choose how the numbers you dial will
appear on the display screen.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
• Backlight — Lets you set backlight options for the LCD, keypad,
Charging, and set the brightness.
2.
• Contrast — Lets you set contrast level for the Display.
Use the navigation keys to highlight a sub-menu.
3.
Press
to enter the highlighted sub-menu. The
following sections describe the above listed display submenus in greater detail.
• Preset Images — Choose a preset image to appear in the display
when the phone is in standby mode.
• Screen Savers — Main Display only — Lets you assign an
animated image to appear in your display when the phone is in
standby mode.
2. Select the desired option. Up to four images or animations
appear in the display.
Menu Style
Menu Style allows you to choose how main menus appear in your
display.
1.
• Icon — Display main menus as icons.
• List — Display main menus in a list format.
2. Highlight the option you want, then press
Highlight an image or animation; then press
to set the
highlighted image or animation to display when the phone
is in standby mode.
At the Settings menu, select Display Settings ➔ Menu
Style. The following options appear in the display:
Clock Format
Clock Format lets you choose whether to show the time in the
display in digital or analog format.
to select the
highlighted option.
Wallpaper
1.
At the Settings menu, select Display Settings ➔ Clock
Format. The following options appear in the display:
At the Settings menu, select Display Settings ➔
• Digital — Large numerical time and date display
• Analog — 12-hour clock face with moving hour and minute
hands
• Off — Default small digital time and date display
Highlight the desired setting, then press
to save the
Wallpaper. The following options appear in the display:
setting.
Wallpaper lets you choose the pictures that appear in your
phone’s display while in standby mode.
1.
3.
• My Images — Choose a downloaded image to appear in the
display when the phone is in standby mode.
Changing Your Settings
60
Dialing Font Size
Backlight
Dialing Font Size lets you select the size of displayed dialed
numbers.
1.
At the Settings menu, select Display Settings ➔ Dialing
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
font size.
1.
The following options appear in the display:
• Normal
• Large
2. Highlight the desired font size, then press
Backlight. The following sub-menus appear in the display:
to save the
setting.
Banner
Create your own personalized text greeting that appears in the
display while your phone is in standby mode.
1.
At the Settings menu, select Display Settings ➔ Banner.
The Banner text entry screen appears in the display.
Note: If necessary, press and hold
2.
to erase an existing banner.
Enter a word or short phrase (up to 12 characters) to
appear in your phone’s display while in standby mode. (For
more information, refer to “Entering Text” on page 26.)
3.
61
Press
to save the new banner.
At the Settings menu, select Display Settings ➔
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off.
• Keypad — Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are 7, 15, and 30
Seconds and Always On (this setting uses much more power than
the timed settings) and Always Off.
• Brightness — Use the Navigation key to select between any of 5
optional settings.
• Charging — When set to On, the backlight stays on while your
phone is on and you are charging the battery.
2. Highlight an option.
3.
Press
to enter the highlighted option’s sub-menu and
to save changed settings as desired.
Contrast
Set the Front (Sub) LCD contrast to your preference.
1.
At the Settings menu, select Display Settings ➔
Contrast. The CONTRAST screen appears in the display.
2.
• Alarms — Lets you set the volume and/or vibration for the alarm
ringer.
2. Select a Volume option.
3.
Navigation key to select a volume level (or vibrate mode)
Use the Navigation key to adjust the contrast for the Front
for the selected Volume option.
Display. The results of your adjustments appear in the
4.
display.
3.
Press
to save your new contrast setting.
Sound Settings
The sound menu provides a variety of options to customize audio
properties for such things as ringers, keypad tones alerts, and
more.
Volume
Use the Volume sub-menu to set the default volume for incoming
calls and alarms, or set the phone to vibrate.
1.
At the Settings menu, select Sound Settings ➔ Volume.
The following options appear in the display:
• Voice Calls — Lets you set the volume and/or vibration for the
incoming calls ringer.
• Messages — Lets you set the volume and/or vibration for the
incoming messages ringer.
Use the Volume key (on the left side of the phone) or the
Press
to save the setting.
Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
1.
At the Settings menu, select Sound Settings ➔ Ringer
Type. The following options appear in the display:
• Voice Calls — Lets you set which ringtone or sound file plays
when you receive a voice call.
• Messages — Lets you set which ringtone or sound file plays when
you receive a Text Message, Picture Message, and/or Voicemail
message.
When you select Messages, the following options appear in the
display:
– Text Message
– Voicemail
– Msg Reminder
2. Select the desired sub-menu.
Changing Your Settings
62
The following options appear in the display:
• My Ringtones
• My Sounds
3. Select the desired option and highlight a Ringer, then press
Key Tone
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
1.
to save the changed Ringer setting.
Tone. The following options appear in the display:
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1.
At the Settings menu, select Sound Settings ➔ Alerts.
The following Alerts sub-menus appear in the display:
• Minute Beep — Sounds an alert ten seconds before each
elapsed minute of a call.
• Roaming — Sounds an alert when you leave your home service
area.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On/Off — Plays a melody when you turn the phone on or
off.
• Charge Alert — Plays a melody when you connect the Travel
Adapter and when the battery is fully recharged.
2. Select the desired alert, then Highlight On or Off.
3.
63
Press
to save your selection.
At the Settings menu, select Sound Settings ➔ Key
• Tone Level (volume)
• Tone Length
Tone Level is highlighted.
2.
Press
to adjust the Key Tone volume.
• Use the Volume key or Navigation key to set the keypad tones
volume.
• Press SET (
) when the desired key tone volume setting is
reached. You are returned to the Key Tone sub-menu.
3. Select Tone Length, then Highlight Short or Long.
4.
Press
to save your setting. You are returned to the
Key Tone sub-menu.
Call Settings
You can use Call Settings to select how your phone handles calls,
both voice and data calls.
Call Answer
You can select a specific answer mode when you receive an
incoming call.
1.
At the Settings menu, select Call Settings ➔ Call
• After 5 Seconds — Phone automatically answers calls after 5
seconds
2. Highlight the desired setting, then press
.
Answer. The following Call Answer options appear in the
display:
• Any Key — Press any key except , the soft keys (
or the Volume key to answer an incoming call.
• Send Key — Press
to answer an incoming call.
),
Tip: You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Auto Answer” on page 64.)
2.
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1.
At the Settings menu, select Call Settings ➔ Auto Retry.
Highlight the method you wish to use for answering calls,
The Auto Retry sub-menu with the following options
then press
appears in the display:
.
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
1.
Auto Retry
At the Settings menu, select Call Settings ➔ Auto
Answer.
The following options appear in the display:
• Off — Disables automatic answering of calls
• After 1 Second — Phone automatically answers calls after 1
second
• After 3 Seconds — Phone automatically answers calls after 3
seconds
• Off — Disables automatic redialing of numbers
• Every 10 Seconds — Phone automatically redials a number
every 10 seconds
• Every 30 Seconds — Phone automatically redials a number
every 30 seconds
• Every 60 Seconds — Phone automatically redials a number
every 60 seconds
2. Highlight the desired setting, then press
.
TTY Mode
Your phone is fully TTY compatible. TTY equipment is connected
to your phone through the headset connector on the left side of
the phone. TTY must be enabled before you can use your phone
with a TTY device.
Changing Your Settings
64
1.
At the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to change the
current TTY Mode setting.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1.
Note: The “Enabling TTY may impair headset use and non-TTY
accessory performance.” message pops up when you select TTY
Mode.
2.
To access the TTY Mode options, press the Yes soft key.
To return to the Call Settings sub-menu, press the No soft
key.
3.
When you press the Yes soft key, the following options
appear in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece
• TTY + Talk — Enables TTY mode and microphone
• TTY + Hear — Enables TTY mode and earpiece
• TTY Off — Disables TTY mode
4. Highlight your selection, then press
to save your
selection and return to the Call Settings sub-menu.
Note: The TTY icon (
65
) appears in the top of the display.
At the Settings menu, select Call Settings ➔ Voice
Privacy. The following options appear in the display:
• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
2. Highlight the Voice Privacy setting of your choice, then
press
to save your setting.
Phone Settings
Airplane Mode
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from receiving or making calls
(except emergency calls), but allows you to use other features
(such as the Tools) safely in sensitive environments, such as on
board an aircraft.
1.
At the Settings menu, select Phone Settings ➔ Airplane
Mode.The following options appear in the display:
• On — Disables the radio transmitter and receiver in your phone.
• Off — Enables the radio transmitter and receiver in your phone.
2. Select the desired option.
• When you select On, the “Will disable all incoming and outgoing
call?” prompt appears in the display.
• When you select Off, the “Will enable all incoming and outgoing
call?” prompt appears in the display.
3. Press the Yes soft key to apply your selection, display/
remove the Airplane Mode icon (
), and return to
standby mode.
Press the No soft key to make another selection.
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
The language option on your phone can change the language of
voice prompts, menus, and key-input.
At the Settings menu, select Phone Settings ➔
Language. The following options appear in the display:
• English
• Español
2. Highlight your language preference, then press
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
1.
Language
1.
Lock Phone
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Lock Phone.
The following Device Lock Mode options appear in the
display:
to
implement your preferred language.
Security
Use the Security menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, as well
as other security options.
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
• Unlock — Unlocks the phone.
• On Power Up — The phone locks automatically the next time your
phone is powered ON. (The phone stays locked until you enter the
lock code.)
3. Highlight the desired Device Lock Mode, then press
to invoke your setting.
Changing Your Settings
66
Change Lock
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1.
At the Settings menu, select Phone Settings ➔ Security.
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Change Lock. You’re
prompted to enter the New Lock Code.
3.
Enter the New Lock Code. You’re prompted to re-enter the
New Lock Code for verification.
4.
Enter the New Lock Code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
1.
Emergency #
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
67
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Emergency #.
Select one of the three emergency number entries.
To keep your current Settings and return to the Security
4.
Enter an emergency number (up to 32 digits in length).
sub-menu, press the No soft key.
5.
Press
3.
to save the number you entered.
Call Emergency Numbers in Lock Mode
1.
In standby mode with the phone locked, enter the
emergency number.
2.
Press
Erase All Entries
Erase All Entries erases your Contacts list entries and My Images
photos. This feature is useful if you want to give your phone to
someone else.
1.
to place the call.
Resetting Your Phone
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
Reset Phone returns all Settings options to their factory default.
1.
At the Settings menu, select Phone Settings ➔ Security.
2.
Note: The default lock code is the last four digits of your telephone number.
2.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code, then select Reset Phone. You are
3.
You are prompted to confirm erasure of all entries.
prompted to confirm that you wish to reset your phone’s
4.
Press the Yes soft key to erase all entries or press the No
Settings to default values (except for your Contacts list and
Voice Dial).
3.
Enter the lock code, then select Erase All Entries. You are
prompted to enter the lock code a second time.
You’re prompted to enter the lock code.
To reset your Settings to default values, press the Yes soft
key.
soft key to return to the Security sub-menu.
Restriction
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and access to your Contacts.
1.
At the Settings menu, select Phone Settings ➔ Security.
Changing Your Settings
68
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Restriction. The following
options appear in the display:
• Outgoing — Blocks/allows all outgoing calls.
• Incoming — Blocks/allows all incoming calls.
• Contacts — Blocks/allows all access to Contacts list entries.
3. Select the desired Restriction. The following options
appear in the display:
• On — Enable the selected Restriction.
• Off — Disable the selected Restriction.
4. Highlight On or Off, then press
to save and implement
your new setting.
System Select
The System Select menu allows you to select the roaming
setting for your phone.
1.
At the Settings menu, select Phone Settings ➔ System
Select. The following roaming options appear in the
display:
• Home only — Your phone is available for normal operation only
within your designated coverage area.
69
• Automatic — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
2. Select the desired roaming option. You setting is saved,
and you are returned to the Phone Settings menu.
Set Time
Use the Set Time option to set the current date and time while in
an analog network.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
1.
At the Settings menu, select Phone Settings ➔ Set Time.
The following options appear in the display:
• Set Date
• Set Time
2. Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Enter the current date in mm/dd/yyyy format using your keypad.
The month and day entries require two digits each. The year must be
entered using all four digits.
– Press
to save your Date setting.
• For Set Time, the Set Time screen appears in the display.
– Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12/
24-hour format.
– Use the Up/Down navigation keys to highlight the time-of-day setting
(am/pm) field.
– Use the Left/Right navigation keys to select am, pm, or 24 Hours. [You
(for pm).]
can also press
(for am) or
– Press
to save the your Time setting.
I
2.
1.
• On — Quick Search is enabled
• Off — Quick Search is disabled
2. Highlight the desired Quick Search option, then press
to save your setting.
Searching for a Menu Item
1.
In standby mode, press the first few numeric keys that
O
X
Press the Down navigation key. The Menu List screen
match your entry.
3.
At the Settings menu, select Phone Settings ➔ Quick
Search. The following options appear in the display:
B
appears in the display showing a list of menu items that
Quick Search
Quick Search is an easy way to locate Menu items and Contacts.
N
Select the desired menu item to access the content of the
menu item.
Tip: If the menu item you are searching for does not appear in the Menu List
screen, try expanding your search by pressing
to delete the last
digit of your entry.
Searching for a Contact
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the contacts name.
For example, to search for “Sally” you would enter:
correspond to the letters of the Menu item name.
For example, to search for “Inbox” you would enter:
S
A
L
L
Y
Changing Your Settings
70
2.
Press the Up navigation key. The Find screen appears in
the display showing a list of Contact names that match
Phone Number
your entry.
3.
Highlight the desired Contact, then press
phone, the meanings of your phones status icons, and the phone
number assigned to your phone.
to call the
highlighted Contact.
Memory Info
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1.
Memory Info lets you quickly and easily review your phone
memory usage. To access Memory Info, do the following:
1.
information:
• Total Used memory usage
• Available unused memory
• My Images memory usage
• My Ringtones memory usage
• My Sounds memory usage
• Applications memory usage
2. Press
to return to the Settings menu.
Phone Info
Phone Info options let you identify important information about
your phone, such as the hardware and software versions of your
71
Number. The phone number assigned by your Wireless
Provider appears in the display.
At the Settings menu, select Memory Info. The Memory
Info screen appears in the display showing the following
At the Settings menu, select Phone Info ➔ Phone
2.
Press
to return to the Phone Info menu.
Icon Glossary
This option causes the ICON GLOSSARY list to appear in the
display and show the icons that can appear in the display and the
names of the icons.
1.
At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
of the display shows in the display.
2.
Press
to return to the Phone Info menu.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1.
At the Settings menu, select Phone Info ➔ Version.
Your phone’s hardware and software version information
appears in the display.
2.
Press
to return to the Phone Info menu.
ESN / MEID
You can view the ESN (Electronic Serial Number)/MEID (Mobile
Equipment Identifier) values for your phone in both Decimal and
Hex values from this menu.
1.
At the Settings menu, select Phone Info ➔ ESN/MEID.
2.
Press
The ESN/MEID information displays in Dec and Hex.
to return to the Phone Info menu.
Warranty Date Code
1.
At the Settings menu, select Phone Info ➔ Warranty
2.
Press
Date Code. The Warranty Date Code displays.
to return to the Phone Info menu.
Changing Your Settings
72
Section 12: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
73
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
• Head: 1.26 W/Kg.
• Body-worn: 0.964 W/Kg.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: https://fun.samsungmobileusa.com/recycling/index.jsp for more
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Health and Safety Information
74
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
75
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
Health and Safety Information
76
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
77
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
Health and Safety Information
78
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
79
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• Health Protection Agency:
http://www.hpa.org.uk/radiation
• US Food and Drug Administration:
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
Health and Safety Information
80
3.
Position your wireless phone within easy reach. Be able to
7.
may be distracting. Make people you are talking with
from the road. If you get an incoming call at an
aware you are driving and suspend conversations that
inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving;
have the potential to divert your attention from the road.
8.
if necessary, suspend the call in heavy traffic or hazardous
traffic can be hazardous.
or medical emergencies.
9.
Use your wireless phone to help others in emergencies. If
Do not take notes or look up phone numbers while driving.
you see an auto accident, crime in progress or other
Jotting down a "to do" list or flipping through your address
serious emergency where lives are in danger, call 9-1-1 or
book takes attention away from your primary
other local emergency number, as you would want others
responsibility, driving safely.
6.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
weather conditions. Rain, sleet, snow, ice and even heavy
5.
Do not engage in stressful or emotional conversations that
access your wireless phone without removing your eyes
Dial sensibly and assess the traffic; if possible, place calls
to do for you.
10. Call roadside assistance or a special non-emergency
when you are not moving or before pulling into traffic. Try
wireless assistance number when necessary. If you see a
to plan calls when your car will be stationary. If you need to
broken-down vehicle posing no serious hazard, a broken
make a call while moving, dial only a few numbers, check
traffic signal, a minor traffic accident where no one
the road and your mirrors, then continue.
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
81
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Health and Safety Information
82
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org
83
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: cdcinfo@cdc.gov
Internet: http://www.cdc.gov
1-888-232-6348 TTY
Internet: http://www.cdc.gov/niosh/topics/noise/
default.html
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
Health and Safety Information
84
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
85
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
Health and Safety Information
86
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
87
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Health and Safety Information
88
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
89
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
Health and Safety Information
90
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
91
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Health and Safety Information
92
Section 13: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
93
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
Warranty Information
94
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
95
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
Warranty Information
96
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
97
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
Warranty Information
98
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
99
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2009 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
100
Index
A
Adjust
key tone 63
B
Browser 47
How Browser Keys Work 48
Launching Browser 47
Using Browser 47
Using Links 48
D
Display Settings 59
Backlight 61
Banner 61
Clock Format 60
Contrast 62
Dialing Font Size 61
Menu Style 60
Wallpaper 60
E
C
Call Settings 63
Auto Answer 64
Auto Retry 64
Call Answer 63
TTY Mode 64
Voice Privacy 65
Changing Your Settings 59
Contacts List 29
Open 29
Creating and Sending New Messages
Text Message 39
101
ESN 72
Exit Browser 47
G
Games & Apps 49
H
HAC 85
Health and Safety Information 73
I
Icon Glossary 71
K
Key Tone 63
M
MEID 72
Memo Pad
Add a Memo 51
Review, edit, and erase memos 52
Message Folders 42
Drafts folder 44
Inbox 42
Messages and Lock Mode 43
Outbox 43
Voicemail 44
Message Send Options 40
Message Setting 45
Messaging 39
Erasing Messages 45
Message Settings 45
M-Ratings 85
P
Personal Organizer
Alarm Clock 52
Calculator 55
Calendar 50
Memo Pad 51
World Time 54
Phone Info
ESN/MEID 72
Icon Glossary 71
Phone Number 71
Version 72
Phone Number 71
Phone Safety 84
Phone Settings 65
Airplane Mode 65
Language 66
Quick Search 70
Security Settings 66
Set Time 69
System Select 69
R
Receiving New Messages 41
While in a Call 41
S
SAR values 73
Security Settings 66
Change Lock 67
Emergency # 67
Erase All Entries 68
Lock Phone 66
Resetting Your Phone 68
Restriction 68
Settings
Airplane Mode 65
Alerts 63
Auto Answer 64
Auto Retry 64
Backlight 61
Banner 61
Call 63
Call Answer 63
Call Settings 63
Change Lock 67
Clock Format 60
Contrast 62
Dialing Font Size 61
Display 59
Emergency # 67
Erase All Entries 68
Key Tone 63
Language 66
Location 59
Lock Phone 66
Memory Info 71
Menu Style 60
Phone Info 71
Phone Settings 65
Quick Search 70
Resetting Your Phone 68
Restriction 68
Ringer Type 62
Security 66
Security Settings 66
Set Time 69
Sound 62
Sound Settings 62
System Select 69
TTY Mode 64
Voice Privacy 65
Voicemail 41
Volume/Vibrate 62
Wallpaper 60
Sound Settings 62
Alerts 63
Key Tone 63
Ringer Type 62
Volume/Vibrate 62
Standard Limited Warranty 93
102
T
Text
Entering Numbers 28
Entering Symbols 28
Using Abc Mode 27
Text message 39
Time, set 69
Tools/Utilities 50
Tools/Utilities Menu 50
T-Ratings 85
TTY Mode 64
U
UL Certification 74
Understanding Your Contacts 29
Adding a New Contact Entry 29
Deleting a Contact Entry 38
Editing an Existing Contact Entry 33
Finding a Contact Entry 32
Memory 38
Pauses 34
V
Version 72
Voicemail 41
Checking 41
Setup 41
103
W
Warranty Information 93