Quick Start Setup Guide

Quick S tart Setup Guide – CenterPoint Energy

Visit myaztech.ca for User and Configuration Manuals

Step 1: Power up your In-Home Display (IHD)

Plug the power adaptor into a 120 V AC wall outlet and press the middle button to turn on. Your IHD can also operate on batteries so that you can take the display throughout your home and explore how the use of

different appliances impacts your energy use. Charge the IHD batteries overnight before first use.

Select

Scroll

Power on

Step 2: Select Language for IHD text

• Select language using the up ▲ button to scroll through options.

• Press the center √ button to select the desired language.

This selection only impacts labels on the information screens and menus. This selection does not translate messages sent by the utility via the Smart meter.

Step 3: Join your IHD to your meter

• First, register and commission your IHD online at smartmetertexas.com

• For additional help, contact the Smart Meter Texas team at 1-888-616-

5859.

During the pairing process,

• “Acquiring Signal” will be displayed and

• the light bar will glow red, sweeping back and forth.

If no connection is found within 5 minutes,

• verify that the Acquiring Signal message is being displayed

• (if you have not selected a language, repeat step 2) and

• move the IHD closer to the meter.

When the meter connection is found,

• the information screens will become available for viewing and

• the IHD will begin receiving information from the Smart meter.

For further product or warranty assistance, please visit myaztech.ca or email our service and support team at [email protected].

Copyright © 2013 by Aztech Associates, Inc. All rights reserved. No part of this guide may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of Aztech Associates Inc.

Step 4: IHD Operation

S 097-0600 L01 myaztech.ca

This Product is protected under the following patents: US Patent 8325057, China Patent 101765758, Japan Patent 5026530 and New Zealand Patent 59331. Other patents pending.

This Product is licensed under the Wireless Network Patent Portfolio, for use by a consumer or other users for which there is no remuneration. Any other users of this Product in any manner is not licensed and is expressly prohibited without a license under applicable patents in the Wireless Network Patent Portfolio, which license is available from MPEG LA, LLC, 4600 S. Ulster ST., Suite 400, Denver, Colorado

80237 U.S.A. See mpegla.com.