TE100-S24plus

24-port 10/100Mbps NWay Switch (Rack Mount)

TRENDnet's TE100-S24plus is a high performance, autosensing 24-port NWay rack-mountable Fast Ethernet Switch.

It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. With 10/100Mbps NWay technology, the TE100-S24plus automatically negotiates between 10Base-T and 100Base-TX network speeds, as well as half and full duplex modes. The TE100-S24plus also has a module bay for optional multimode SC type fiber module that allows connection to another fiber device up to 2Km away (in full-duplex mode). The auto MDI-II/MDI-X detection on each port automatically detects and corrects for crossover connection and allows direct switch-to-switch or switch-tohub connection for your networking needs.

TRENDnet

TRENDware, USA

What's Next in Networking

FEATURES

24 10/100Mbps NWay Auto MDI-II/MDI-X ports

Integrate address Look-Up Engine, supports up to 4K absolute MAC address

768KB internal RAM for frame buffering

Full/half duplex transfer mode for each port

Wire-speed filtering/forwarding rates

IEEE 802.3x flow control for full-duplex mode

Back pressure flow control for half-duplex mode

Store-and-forward switching method

Extensive front-panel diagnostic LEDs

One module bay for optional one-port 100Base-FX multimode SC type fiber connection

5 Year Warranty

BENEFITS

Performance:

Top performance at an affordable price.

Expandability:

Current Ethernet workgroups are able to upgrade to Fast Ethernet by changing adapters and hubs without changing switches.

Flexibility:

All ports automatically negotiate

10/100Mbps network speed, half/fullduplex mode, and MDI-II/MDI-X connector type.

Expandability:

Optional 100Base-FX multimode SC type module links to other fiber device up to 2Km in full-duplex mode.

Cost Effectiveness:

Provide 10/100Mbps of Fast Ethernet at an affordable rate.

TE100-S24plus (11-17-2002)

SPECIFICATIONS

Standards:

• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/

100Base-FX ANSI/IEEE 802.3 NWay auto-negotiation

Connectors:

• 24 10/100Mbps shielded RJ45 Auto MDI-II/MDI-X ports

Network Cables:

• Ethernet: CAT 3, 4, 5 UTP/STP

• Fast Ethernet: CAT 5 UTP/STP for 100Base-TX

• Fiber Module: 62.5/125mm multimode fiber-optic with

SC type connector (412 m in half-duplex mode,

2 Km in full-duplex mode)

Protocols:

• CSMA/CD

Data Transfer Rate:

• Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)

• Fast Ethernet: 100Mbps (Half-Duplex),

200Mbps (Full-Duplex)

Data RAM Buffers:

• 768KB per device

Filtering Address Table:

• 4K entries per device

Internal Power Adapter:

• 100~240 VAC, Universal Power Supply

Diagnostic LEDs:

• Power, Link/Act, FDX/COL, 100Base-FX

Dimensions:

• 440 x 140 x 44 mm

(17.3 x 5.51 x 1.73 inch) (W x H x D)

Temperature:

• Operating: -10° ~ 50°C (14 ~ 122°F)

• Storage: -10° ~ 70°C (14° ~ 158°F

Humidity:

• Operating: 10% ~ 90% RH

• Storage: 5% ~ 90% RH

Emission:

• FCC Class A, CE Mark A, VCCI-A

NETWORKING SOLUTIONS PRODUCT INFORMATION

TE100-S16plus: 16-Port 10/100Mbps NWay

Fast Ethernet Switch

TE100-S24plus: 24-Port 10/100Mbps NWay

Fast Ethernet Switch

TE100-S32plus: 32-Port 10/100Mbps NWay

Fast Ethernet Switch

TE100-SFXM: Multimode SC-Type Fiber

Slide-in Module for TE100-S1616/S2424 and

TE100-S16/S16plus/S24plus

ORDERING INFORMATION

TRENDware International, Inc.

3135 Kashiwa Street

Torrance, CA. 90505. USA

Tel: 310-891-1100

Fax: 310-891-1111

Web: www.TRENDNET.com

Email: [email protected]

TRENDnet

TRENDware, USA

R

To Order Please Call:

1-888-326-6061

TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit http://www.TRENDNET.com.