EAW MQ1312 Speaker User manual
Add to my manuals
2 Pages
EAW MQ1312 is a low frequency loudspeaker system designed for permanent installation. It features three 12-inch woofers in an optimally tuned, vented enclosure, providing a frequency response of ±3 dB from 50 Hz to 1.6 kHz and a maximum output of 137.8 dB SPL. The MQ1312 is designed to work with the MQ1364, MQ1366, and MQ1394 mid/high modules to create arrays for a wide variety of applications, including large houses of worship, stadiums, theaters, arenas, and performing arts centers.
advertisement
SPECIFICATIONS MQ1312
FEATURES
• Low frequency loudspeaker system
• Optimized for permanent installation only
• 3x direct radiating 12-in woofers
• Optimized to array with MQ1364, MQ1366 and
MQ1394
DESCRIPTION
The new MQ Series represents the next generation of permanent installation loudspeaker systems. The Series comprises matched sets of mid/high and low frequency enclosures that enjoy complementary dimensions and trapeziod angles to facilitate the creation of optimized-coverage arrays. The
MQ1312 uses three direct radiating 12-in woofer cones in an optimally tuned, vented enclosure.
APPLICATION
The MQ1312 low frequency module works with the MQ1364,
MQ1366 and MQ1394 mid/high modules to create arrays for use in a wide variety of permanently installed applications.
The most common array configuration is 2x MQ1364’s or
MQ1366’s separated by a single MQ1312. In such an array, a certain amount of splay must be provided to achieve optimal coverage.
When arraying 2x MQ1394’s separated by a single MQ1312, the modules should be tight packed to achieve optimal coverage. This provides an excellent center channel array for large, fan-shaped venues that use an L/C/R configuration.
All MQ Series enclosures feature a comprehensive system of
3/8”-16 threaded mounting points for maximum flexibility when suspending arrays overhead.
Applications include:
Large Houses of Worship
Stadiums Theater
Arena
Performing Arts Center
PERFORMANCE
Frequency Response (1 W @ 1m)
±3 dB 50 Hz to 1.6 kHz
-10 dB 40 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF 100
Impedance (Ohms)
LF 3x 8
Power Handling, AES Standard (Watts)
LF 1500
Calculated Maximum Output (dB SPL)
LF Peak 137.8
LF Long Term 131.8
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 160
Vertical
Recommended High-Pass Frequency
60
24 dB/Octave 40 Hz
PHYSICAL
Configuration Dedicated low frequency loud speaker
LF Subsystem 3x 12-in woofers
Cabinet Type (shape) Trapezoid
Enclosure Materials Baltic birch plywood
Finish Black polyurethane
Dimensions
Weights
Connectors 6-terminal barrier strip & 2x
Neutrik NL4 Speakon
Suspension Hardware (16) 3/8"-16 threaded mounting suspension points (4 each top, bottom and sides)
Grille Powder coated perforated steel inches millimeters
Height 40
Width (front) 24
Width (rear) 12.75
1016
610
324
533 Depth 21
Trapezoid Angle 30° pounds
Net Weight 125
Shipping Weight 131 kilograms
56.9
56.6
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
MQ1312/888140/2 pp [email protected]
4/1/00 www.eaw.com
Printed in USA
SPECIFICATIONS MQ1312
DIMENSIONAL DRAWING
MQ1312
24.00
40.00
GRILL PARTIALLY
SHOWN
FRONT
6.37
CENTER OF BALANCE
MOUNTING POINT, 3/8-16 THREADED HOLE.
(12.75)
12.70
21.00
7.50
5.68
10.34
17.15
30
°
TOP
5.63
13.15
36.10
10.69
510837 (0) exp 8/2/99 dpm
1.95
SIDES
Manufacturing tolerances are +/- 0.13 and +/- 1°
INPUT
BACK
7.38
20.00
A & E SPECIFICATIONS
The low frequency loudspeaker systems shall incorporate 3x
12-in LF transducers. The LF drivers shall be mounted in separate vented subenclosures tuned for optimum low frequency response.
System frequency response shall vary no more than ±3 dB from
50 Hz to 1600 Hz measured on axis. The loudspeaker shall produce a Sound Pressure Level (SPL) of 100 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 137.8 SPL on axis at 1 meter. The loudspeaker shall handle 1500 Watts of amplifier power (AES
Standard) and shall have a nominal impedance of 3x 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 1/2-in thickness void-free cross-grainlaminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in black polyurethane.
Input connectors shall be a 6-terminal barrier strip and 2x
Neutrik NL4 Speakon with connections as follows (LF1 is topmost driver, LF3 is lowest):
Pins 1 +/–
Pins 2 +/–
NL4 (left)
LF1 +/–
LF2 +/–
NL4 (right)
LF3 +/–
LF4 N/C
A total of sixteen 3/8"-16 threaded mounting/suspension points (4 each top, bottom, sides) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille.
The low frequency loudspeaker shall be the EAW model
MQ1312.
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
MQ1312/888140/2 pp [email protected]
4/1/00 www.eaw.com
Printed in USA
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project