Yamaha High Definition Plasma Monitor Operating instructions

SAP
POWER
TV/VIDE
O
T
LIG
E
HT
M
ASPEC
UT
AUX
DVD
RC
VR
R
VC
CBL
DTV
TV
DB
N
A
S
CH
CTIO
VOL
PC
MENU
EXIT
VOL
CH
RECALL
PAGE
1
2
4
5
7
8
GUIDE
3
6
9
R-TUNE
PROG
0
PIP MIN
REW
PLAY
PAUSE
STOP
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
SPLIT
MOVE
PIP MAX
FF
REC
SEARCH
OPEN/CLOSE
SWAP
Operating Instructions
High Definition
Plasma Television
Model No.
TH-42PX20
TH-50PX20
For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : consumerproducts@panasonic.com
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
(Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca
(Canada)
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
TQBC0628-1
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.
The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin
grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent afterimage to remain on the Plasma Television.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in
4:3 mode.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
2
Important Safety Instructions
1) Read these instructions.
All the safety and operating instructions should be read before the appliance is operated.
2) Keep these instructions.
The safety and operating instructions should be retained for future reference.
3) Heed all warnings.
All warnings on the appliance and in the operating instructions should be adhered to.
4) Follow all instructions.
All operating and use instructions should be followed.
5) Do not use this apparatus near water.
For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and
the like.
6) Clean only with dry cloth.
Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid
injury from tip-over.
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination
to overturn.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
This will prevent damage to the product due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment
from your new Plasma TV.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments,
and retain them for future reference.
Retain your purchase receipt also, and record the model number and serial number of your set in the
space provided on the back cover of these instructions.
Visit our Panasonic Web Site for USA :
for Puerto Rico :
for Canada
:
www.panasonic.com
www.panasonic.com
www.panasonic.ca
For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : consumerproducts@panasonic.com
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
(Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca
4
(Canada)
FCC STATEMENT
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC CAUTION:
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be
used when connecting this plasma display to video equipment; and maintain at least 40cm spacing to other
peripheral devices. Refer to instructions on pages 10.
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this TV not expressly approved
by Matushita Electric Corporation of America could result harmful interference and would void the user’s
authority to operate this device.
Any changes or modifications not expressly approved by Matsushita Electric Corporation of America could
cause harmful interference and would void the user’s authority to operate this device.
FCC Declaration of Conformity
Model No. TH-42PX20, TH-50PX20
Responsible Party:
Contact Source:
Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-888-843-9788
email: consumerproducts@panasonic.com
Attach the ferrite core:
The ferrite cores provided as a supplied accessory must be used when connecting this Plasma TV to video equipment.
(see page 11,12,13,14,15,18,19,21)
CANADIAN NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
Trademark Credits
VGA is a trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, USA.
S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
•
•
•
5
Table of Contents
Important Safety Instructions ....................................... 3
FCC STATEMENT ........................................................... 5
Table of Contents ........................................................... 6
Safety Precautions ......................................................... 7
Installation ...................................................................... 9
Receiver Location ......................................................... 9
Optional External Equipment ........................................ 9
Remote Control Battery Installation .............................. 9
Accessories ...................................................................10
Cable Connection ......................................................... 11
Connecting the Aerial cable to the RF In Terminal ....... 12
Antenna Connection ............................................12
Connecting Headphones / Earphones ........................ 12
Front Control Panel ..................................................... 13
Optional Equipment Connections ............................... 13
Cable Box Connection ........................................ 13
VCR Connection ................................................. 14
VCR and Cable Box Connection ......................... 15
Digital TV - Set-Top Box (DTV-STB) or DVD Connection ... 16
Amplifier Connection (TO AUDIO AMP) .............. 16
Program Out Connection (PROG OUT) .............. 16
How to connect the HDMI Terminal ..............................17
PC Input Terminals connection ................................... 18
Power ON / OFF ............................................................ 19
AC cord connection ..................................................... 19
How to Turn the Power On .......................................... 19
Menu Language Selection .......................................... 19
VHF, UHF and Cable TV ................................................ 20
VHF and UHF ............................................................. 20
Cable TV ..................................................................... 21
Location of Controls .................................................... 22
Illuminated Remote Control ........................................ 22
Basic Menu Operations ............................................... 24
SET UP Operation ........................................................ 26
MENU Languages ....................................................... 26
ANTENNA Selection ................................................... 26
cc ON MUTE cc MODE (Closed Captions) ............ 26
Selecting option menus in OTHER ADJ. ..................... 27
MODE Selection ......................................................... 28
AUTO PROGRAM ....................................................... 28
MANUAL PROGRAM .................................................. 28
AUTO POWER ON...................................................... 29
CHAN BANNER .......................................................... 29
SIDE BAR .......................................................................... 29
POWER SAVE ............................................................ 30
PICTURE Adjustment ................................................... 30
PICTURE MODE ........................................................ 30
COLOR / TINT / BRIGHTNESS / PICTURE /
SHARPNESS / NORMAL ............................... 30
Selecting option menus in OTHER ADJ. ..................... 31
COLOR TEMP (Temperature) / NATURAL COLOR /
VIDEO NR / 3D Y/C FILTER ..............................31
COLOR MATRIX ......................................................... 31
FREEZE ...................................................................... 32
Audio Adjustment ........................................................ 33
Selecting STEREO/SAP/MONO ................................. 33
Selecting BASS / TREBLE / BALANCE / NORMAL .... 33
Selecting option menus in OTHER ADJ. ..................... 33
HDMI IN ...................................................................... 33
AI SOUND ................................................................... 34
6
BBE VIVA / BBE .......................................................... 34
SURROUND ............................................................... 34
SPEAKERS ................................................................. 34
CHANNELS Adjustment .............................................. 35
CHANNEL SCAN ........................................................ 35
FAVORITE CHANNELS Selection .............................. 35
Selecting option menus in OTHER ADJ. ..................... 36
PRESET CAPTION ..................................................... 36
MANUAL CAPTION .................................................... 37
INPUT LABEL ............................................................. 37
TIMER ............................................................................ 38
SLEEP ........................................................................ 38
TIMER1 and TIMER2 .................................................. 38
CLOCK SET ................................................................ 40
LOCK Feature ............................................................... 41
CREATE CODE FIRST ............................................... 41
CODE .......................................................................... 41
LOCK SET ...................................................................41
CHANNEL ................................................................... 42
V-CHIP SET ................................................................ 42
U.S. TV PROGRAMS .................................................. 43
U.S. MOVIES ............................................................... 44
Canadian English ........................................................ 45
Canadian French ......................................................... 46
Blocking Message ....................................................... 47
HOW LONG? .............................................................. 47
Picture in Picture Operation ........................................ 48
Split Screen ...................................................................50
ASPECT Controls ......................................................... 52
PC MENU ....................................................................... 53
PICTURE Adjustment ................................................. 54
Adjusting PICTURE POSITION/SIZE ......................... 55
SYNC .......................................................................... 56
H-FREQ. (kHz)/V-FREQ. (Hz) ..................................... 56
JPEG Viewer (SD Card/PC Card) ................................. 57
Operating peripheral equipment using the remote control ..... 62
Programming The Illuminated Remote Control
Using Access Codes ........................................ 62
Programming Without A Code
(When the code is not known) .......................... 63
Infrared Codes Index ................................................... 64
Mode Operational Key Chart ....................................... 67
Troubleshooting Chart ................................................. 69
VIDEO/COMPONENT/RGB/PC/HDMI input signals ... 70
Specifications ............................................................... 71
Safety Precautions
WARNING
Set up
Do not place the Plasma TV on sloped or unstable surfaces.
The Plasma TV may fall off or tip over.
•
Do not place any objects on top of the Plasma TV.
If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or
electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center.
•
Do not cover the ventilation holes.
Doing so may cause the Plasma TV to overheat, which can cause fire or damage to the Plasma TV.
•
If using the pedestal, leave a space of 3 15/16” (10 cm) or more at the top, left and right, 2 3/8” (6 cm) or more at the
bottom, and 2 3/4” (7 cm) or more at the rear. If using some other setting-up method, leave a space of 3 15/16” (10 cm)
or more at the top, bottom, left and right, and 3/4” (1.9 cm) or more at the rear.
Avoid installing this product near electronic equipment that easily receives electromagnetic waves.
It may cause interference in image, sound, etc. In particular, keep video equipment away from this product.
•
AC Power Supply Cord
The Plasma TV is designed to operate on 120 V AC, 50/60 Hz.
Securely insert the power cord plug as far as it will go.
If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.
•
Do not handle the power cord plug with wet hands.
Doing so may cause electric shocks.
•
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not
the cable.
Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the
power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the
cable is suspected, have it repaired at an Authorized Service Center.
•
If the Plasma TV will not be used for a long period of time, unplug the power cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma
TV, unplug the power cord immediately.
Continuous use of the TV under these conditions might cause fire or permanent damage to the unit. Have the TV
evaluated at an Authorized Service Center. Services to the TV by any unauthorized personnel are strongly discouraged
due to its high voltage dangerous nature.
•
If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.
A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made.
•
7
Safety Precautions
CAUTION
This Plasma TV is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)
• Pedestal (included) ............................................. TY-ST42PX20 (TH-42PX20) / TY-ST50PX20 (TH-50PX20)
• Wall-hanging bracket (Vertical) ........................... TY-WK42PV3U
• Wall-hanging bracket (Angled) ............................ TY-WK42PR2U
• Display stand ....................................................... TY-S42PX20U (TH-42PX20) / TY-S50PX20U (TH-50PX20)
Always be sure to ask a qualified technician to carry out set-up.
When using the Plasma TV
Do not bring your hands, face or objects close to the ventilation holes of the Plasma TV.
Top of the Plasma TV is usually very hot due to the high temperature of exhaust air being released through the ventilation
holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the
TV could also result in heat damages to the object as well as to the TV if its ventilation holes are blocked.
•
Be sure to disconnect all cables before moving the Plasma TV.
Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock.
•
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
Electric shocks can result if this is not done.
•
Clean the power cable regularly to prevent it from becoming dusty.
Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire. Unplug
the cord from the wall outlet and clean it with a dry cloth.
•
This Plasma TV radiates infrared rays, therefore it may affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth
or a soft, lint-free cloth.
If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to
remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of the
same type, until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile
substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.
•
•
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth
to wipe the cabinet, and then wipe it dry with a dry cloth.
Do not allow any detergent to come into direct contact with the surface of the Plasma TV.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet
surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact
with articles made from rubber or PVC.
•
•
•
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain
on the Plasma TV.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
8
Installation
Receiver Location
This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for
comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you will need.
Remote Control Battery Installation
Requires two AA batteries.
1. Turn the Transmitter face down.
Remove top cover by pressing
down on marking and sliding cover
off in the direction indicated.
2. Install the batteries as shown in the
battery compartment. (Polarity + or
– must match the markings in the
compartment).
3. Replace the cover and slide in
reverse until the lock snaps.
Two AA size
Helpful Hints:
For frequent remote control users, replace old
batteries with alkaline batteries for longer life.
Helpful Hints:
Whenever you remove the batteries, you may
need to reset the remote control infrared
codes. We recommend that you record the code
on page 59, prior to setting up the remote control.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that
will damage the remote control transmitter.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new
batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn
used batteries.
5. Battery replacement is necessary when remote control acts
sporadically or stops operating the TV set.
9
Accessories
Accessories Supplied
Check that you have the Accessories and items shown
Operating
Instruction book
Remote Control
Transmitter
EUR7603ZB0
Batteries for the Remote
Control Transmitter
(AA Battery × 2)
Warranty
SAP
POWER
TV/VIDE
O
T
LIG
E
HT
M
A SPEC
UT
DVD
AUX
DTV
CBL
RC
R
VC
VOL
PC
MENU
EXIT
VR
S
N
A
TV
DB
CH
CTIO
VOL
CH
RECALL
PAGE
1
2
4
5
7
8
GUIDE
3
6
9
R-TUNE
PROG
0
PIP MIN
REW
PAUSE
FREEZE
TV/VCR
PIP
Pedestal
TY-ST42PX20 (TH-42PX20)
TY-ST50PX20 (TH-50PX20)
PLAY
STOP
PIP CH
VCR CH
SPLIT
MOVE
PIP MAX
FF
REC
SEARCH
OPEN/CLOSE
SWAP
Customer Card
Service
Center List
F Type Antenna
Adapter
(for 3C-2V) (×2)
(for 5C-2V) (×2)
Ferrite core
(small size) (×5)
Clamper
(×2)
AC cord
(large size) (×6) TH-42PX20
(×7) TH-50PX20
Installing the ferrite core
Be sure to choose the appropriate size of ferrite core (large or small) and the correct setting of the cable (winding or
passing), as indicated by each connection diagram on the following pages (12 to 21).
(Winding the cable around the ferrite core)
1
2
3
Open
Close the
ferrite core
Pull back the tabs
(in two places)
(Passing the cable through the ferrite core)
1
2
3
Open
Pull back the tabs
(in two places)
10
Close the
ferrite core
Cable Connection
Front AV terminal
(see page 13)
PC
S-VIDEO VIDEO L AUDIO R
INPUT 3
From EXTERNAL monitor terminal
on Computer (see page 18)
PC CARD
EJECT
SD CARD
PUSH-EJECT
ACTION INPUT
COMPONENT VIDEO INPUT
1
INPUT
1
2
S VIDEO
VOLUME
CHANNEL
HPJ
S-VIDEO VIDEO L AUDIO R
INPUT 3
PC
2
Y
ANT 1
PROG OUT
SPLIT
OUT
ANT 2
PB
VIDEO
PR
VIDEO
L
TO AUDIO
AMP
R
AV terminals
(see page 14,15,17)
COMPONENT
and Audio
Input terminals
(see page 16)
HDMI terminal
(see page 17)
— Fastening of power and other cables
Ferrite core
(large size)
(supplied)
1
1
2
Fastening band
Fastening
Loosening
Pull off.
To tighten.
2
Fastening method of power cable
For other cables, attach the band on
the installation hole, and fasten them.
Keep
the knob
pressed.
Fastening method of power cable
1. Insert the power plug into the main body.
2. Fasten with the power cable fastening band.
3. Bundle the cable with the cable fastening
clamper.
Clamper
11
Cable Connection
Connecting the Aerial cable to the RF In Terminal
Antenna Connection
• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is
recommended. Antenna Mode must be set to TV.
• Incoming Cable from Home Antenna
Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu.
( Cable Mode is preset at the factory. Antenna users must change to TV mode and select ANT1 in the Set Up Menu.)
VHF Aerial
UHF Aerial
COMPONENT VIDEO INPUT
1
INPUT
1
2
2
Y
S VIDEO
ANT 1
PROG OUT
Mixer
SPLIT
OUT
ANT 2
PB
VIDEO
PR
VIDEO
L
TO AUDIO
AMP
Less than
4” (10 cm)
R
75 Ohm
Coaxial Cable
Incoming Cable from
Home Antenna
Ferrite core (large size)
(supplied)
Incoming Cable from
Cable Company
Less than
4” (10 cm)
Note: Certain cable systems offset some channels
to reduce interference or have Premium
(scrambled) channels. A cable converter box
is required for proper reception. Check with
your local Cable company for its compatibility
requirements.
Less than
4” (10 cm)
75 Ohm VHF/UHF
on back of TV
F-Type Antenna
Adapter (supplied)
Ferrite core (large size)
(supplied)
Notes:
(1) To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
(2) If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and your television receiver.
(3) Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your
particular area and the accessories required.
(4) Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred,
are the responsibility of you, the Customer.
Connecting Headphones / Earphones
Connect headphones / earphones as follows.
ACTION INPUT
VOLUME
HPJ
CHANNEL
S-VIDEO VIDEO L AUDIO R
INPUT 3
PC
(M3 plug)
Ferrite core (small size)
(supplied)
Less than
4” (10 cm)
You can listen to sound from the headphone Jack.
12
(Optional)
Cable Connection
Front Control Panel
Push to open the front panel of the television to use the TV without remote control or to use the Audio/Video input jacks for
optional equipment.
TV/VIDEO
Press
or
CAMCORDER
to select VIDEO 3 input mode.
INPUT
ACTION INPUT
VOLUME
CHANNEL
HPJ
S-VIDEO VIDEO L AUDIO R
INPUT 3
Note:
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
Ferrite core (small size)
(supplied)
PC
Less than
4” (10 cm)
A second VCR, video disc player, video game equipment and DSS equipment can also be connected to the video inputs.
See the optional equipment manual for details.
Procedure
1. Connect equipment to front Audio/Video input jacks.
2. Operate optional equipment as instructed in equipment manual.
Note:
The S-VIDEO connection provides higher quality picture. It overrides other VIDEO connections. Use INPUT 3, AUDIO L
and R with S-VIDEO connection.
Optional Equipment Connections
Cable Box Connection
Follow this diagram when connecting your television to a cable box only.
CONNECTIONS ON BACK OF TV
COMPONENT VIDEO INPUT
1
INPUT
1
2
S VIDEO
CABLE BOX
2
Y
ANT 1
PROG OUT
PB
SPLIT
OUT
ANT 2
Less than
4” (10 cm)
VIDEO
VIDEO
PR
ANT OUTPUT
L
TO AUDIO
AMP
R
Incoming Cable
Ferrite core (large size)
(supplied)
ANT INPUT
CABLES NOT
SUPPLIED
Note: The remote control must be programmed with supplied codes to operate the cable box (see page 61).
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or Channel 4.
3. Using the cable box, tune to the premium cable channel you would like to view.
Note:
To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu
(see page 26).
13
Cable Connection
VCR Connection
Follow this diagram when connecting your television to a VCR only.
CONNECTIONS ON BACK OF TV
Use either the S-Video or
the Video connection.
COMPONENT VIDEO INPUT
1
INPUT
1
2
S VIDEO
S-VIDEO
2
Y
ANT 1
PROG OUT
SPLIT
OUT
ANT 2
PB
VIDEO
VIDEO
L
PR
VIDEO
Less than
4” (10cm)
L
TO AUDIO
AMP
AUDIO
R
R
Incoming Cable
ANT INPUT
ANT OUTPUT
Ferrite core
(large size)
(supplied)
CABLES NOT SUPPLIED
VCR
Note: The remote control must be programmed with supplied codes to operate the VCR (see page 59, 60).
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu. (See page 26)
2. Tune the television to the television program you would like to view.
Viewing a video
Procedure
• Option A
1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
2. Begin the video.
• Option B
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
• Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
• Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the program you would like to view.
14
Cable Connection
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
VCR
Use either the S-Video or
CONNECTIONS ON BACK OF TV
the Video connection.
COMPONENT VIDEO INPUT
1
INPUT
1
2
S VIDEO
S-VIDEO
2
Y
ANT 1
PROG OUT
SPLIT
OUT
ANT 2
PB
VIDEO
VIDEO
VIDEO
L
PR
L
Less than
4” (10 cm)
TO AUDIO
AMP
AUDIO
R
R
CABLES NOT SUPPLIED
Incoming Cable
ANT OUTPUT ANT INPUT
Ferrite core
(large size)
(supplied)
CABLE BOX
ANT INPUT ANT OUTPUT
Note: The remote control must be programmed with supplied codes to operate the VCR and cable box
(see page 59 - 61).
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or Channel 4.
3. Using the cable box, tune to the premium cable channel you would like to view.
Note: To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP
menu (see page 26).
Recording a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected
to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you would like to record.
6. Begin recording.
Note: To view a different channel while recording:
• Select ANT1 in the SET UP menu.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a program (except another premium cable channel).
Notes:
(1) Similar connections are available at the INPUT 1, 2, 3 input terminals.
Input 3 is located on the front of the unit.
Select the desired VIDEO input position by pressing the TV/VIDEO button. (See page 23)
(2) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video
input terminal are connected at the same time.
15
Cable Connection
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, PB , PR ) of the television.
A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV.
DTV INPUT TERMINALS ON BACK OF TV
CABLES NOT SUPPLIED
COMPONENT VIDEO INPUT
1
INPUT
1
2
S VIDEO
DIGITAL TV OUTPUT
2
Y
ANT 1
PROG OUT
SPLIT
OUT
ANT 2
PB
Y
VIDEO
MAIN
VIDEO
PB
PR
VIDEO
PR
L
AUDIO OUTPUT
TO AUDIO
AMP
L
R
R
Note:
There are 2 sets of three video inputs, Y, PB , and PR . Separated component color inputs provide luminance and color
separation. Furthermore, the L (left) and R (right) audio inputs must be used.
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an
external audio amplifier TO AUDIO AMP outputs on back
of television.
Note: TO AUDIO AMP terminals cannot be connected
directly to external speakers.
Audio Adjustments
Procedure
1. Select SPEAKERS ON located in the onscreen
AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust television volume to desired level.
4. Adjust amplifier volume to match the television.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT
from AUDIO menu.
6. Volume, mute, bass, treble and balance are now
controlled through the television.
Program Out Connection (PROG OUT)
To use the television audio and video with optional
equipment, connect the PROG OUT and TO AUDIO AMP
connections on the back of the television.
Procedure
1. Connect optional equipment to PROG OUT and TO
AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen
display.
See optional equipment manual for further instructions for
recording and monitoring.
Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
External Amplifier
CONNECTIONS ON BACK OF TV
VCR
COMPONENT VIDEO INPUT
1
INPUT
1
2
S VIDEO
2
Y
PROG OUT
PB
OR
VIDEO
VIDEO
PR
VIDEO
AUDIO INTPUT
L
L
TO AUDIO
AMP
R
R
CABLES NOT SUPPLIED
16
L
AUDIO
R
MONITOR
Cable Connection
How to connect the HDMI Terminal
(HDMI : High Definition Multi media Interface)
HDMI∗1 is the first all digital consumer electronics A/V interface that supports uncompressed standard. One jack supports
both video and audio information.
This HDMI∗1 input can be connected to an EIA/CEA-861/861B∗2 compliant consumer electronic device, such as a Set
Top Box or DVD player equipped with HDMI or DVI output connection.
By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the HDMI terminal of
this television, high-definition pictures can be displayed on the screen in their digital form.
Audio Cable (not included)
HDMI Cable(not included)
Set Top Box
DVD player
Less than
4"(10 cm)
HDMI
signal out
If the external device has DVI output only, use a
DVI to HDMI adaptor cable∗3 to connect to the HDMI
jack. Also, connect the Audio out signal from the
external device.
(Set Top Box or DVD player) to the AUDIO IN∗4 jacks
side the HDMI input.
Applicable VIDEO Signal
This model support following format.
Please adjust the format of connecting equipment.
No. of dots (H × V)
Vertical scanning frequency(Hz)
1080i
1,920 × 1,080i
59.94/60
480P
720 × 480P
59.94/60
640 × 480P
59.94/60
480i
720(1,440) × 480i
59.94/60
This input terminal is not intended for use with computers.
AUDIO signal (L.PCM)
when the digital sound signal is included at connecting HDMI equipment.
Sumpling freguency
48KHz / 44.1KHz / 32 KHz
Notes:
(1)This HDMI connector is Type A.
(2)If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminal Output setting,
use the component Video input (or the S video Input or Video Input). In this case the picture will be displayed as an
analog signal.
(3) HDMI-DVI conversion cable (TY-SCHO3DH):available on Panasonic Website.
(www.panasonic.com)
∗1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
∗2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital videoincluding
high bandwidth digital content protection.
∗3. Consult your consumer electronics dealer for availability details.
∗4. (HDMI IN)Please refer to page 24.
• The HDMI terminal of this equipment is TYPE A.
17
Cable Connection
PC Input Terminals connection
COMPUTER
S-VIDEO VIDEO L AUDIO R
INPUT 3
Ferrite core (small size)
(supplied)
PC
Less than
4" (10 cm)
Audio
Stereo plug
Connect a cable which matches
the audio output terminal on the computer.
Conversion adapter
(if necessary)
Less than
4" (10 cm)
Less than
4" (10 cm)
RGB
PC cable
D-sub 15p
Ferrite core (large size)
(supplied)
Notes:
(1) Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical
scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
(2) The display resolution is a maximum of 768 × 768 dots (TH-42PX20), 1,024 × 768 dots (TH-50PX20) when the
aspect mode is set to “4:3”, and 1,024 × 768 dots (TH-42PX20), 1,366 × 768 dots (TH-50PX20) when the aspect
mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to show fine detail
with sufficient clarity.
(3) Some PC models cannot be connected to the set.
(4) There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
(5) The computer shown in the illustration is for example purposes only.
(6) Additional equipment and cables shown are not supplied with this set.
(7) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.
Signal Names for D-sub 15P Connector
11 12 13 14 15
6
7
1
8
2
9 10
3
4
5
Pin Layout for PC Input
Terminal
18
Signal Name
Pin No.
Pin No.
Signal Name
Pin No.
Signal Name
R
1
6
GND (Ground)
11
NC (not connected)
G
2
7
GND (Ground)
12
NC
B
3
8
GND (Ground)
13
HD/SYNC
NC (not connected)
4
9
NC (not connected)
14
VD
GND (Ground)
5
10
GND (Ground)
15
NC
Power ON / OFF
AC cord connection
Connecting the AC cord plug to the Plasma TV.
Fix the AC cord plug securely to the
Plasma TV with the clamper.
Ferrite core (large size) (supplied)
How to Turn the Power On
Connecting the Plug to the Wall Outlet
Note:
The TV’s power cord must first be plugged into the wall
outlet and then turned on at the POWER switch (standby
mode).
Press the POWER switch on the TV to turn the set on.
POWER-ON: Red
When the set is on press the POWER switch on the TV
to turn the set off.
STANDBY: No light
POWER
Example: The screen below is displayed for a while after
the TV is turned on. (setting condition is an
example.)
Power
indicater
SAP
Remote
Control
senser
LIG
H
E
UT
T
M
TV/VIDEO
DVD
AUX
DTV
CBL
RC
R
VC
VR
VIVID
S
POWER
CH
CTIO
N
A
TV
DB
VOL
PC
MENU
JUST
SAP
POWER
T
ASPEC
CH 3
VOL
CH
RECALL
Press the POWER button on the remote control to turn
the TV on: Red
Press the POWER button on the remote control to turn
the TV off: No light (standby)
Note:
The TV will still consume some power as long as the power cord is still inserted
into the wall outlet.
Menu Language Selection
In SET UP Menu, Select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French). (refer to page 26)
19
VHF, UHF and Cable TV
VHF and UHF
PC CARD
EJECT
SD CARD
PUSH-EJECT
ACTION INPUT
VOLUME
HPJ
CHANNEL
S-VIDEO VIDEO L AUDIO R
INPUT 3
ACTION button
(Press to make
selections.)
INPUT button
(Change to input
signal.)
Remote control sensor
Power indicator
S-VIDEO VIDEO L AUDIO R
INPUT 3
PC
POWER
TV/VIDEO
T
ASPEC
LIG
H
T
E
UT
DVD
AUX
DTV
CBL
RC
VR
R
Operation can be done
from the TV set.
Channel selectors
Volume adjusters
•
•
C.A.T.S sensor
Plasma C.A.T.S (Contrast Automatic Tracking System)
Plasma C.A.T.S automatically senses the ambient light
conditions and adjusts the brightness and gradation
accordingly, to optimise contrast.
(Effective when Picture mode is set to Auto.)
SAP
CH
CTIO
N
A
TV
DB
S
PC
MENU
EXIT
VOL
CH
Press
1
2
POWER
GUIDE
1
2
3
4
5
6
7
8
9
R-TUNE
to operate the TV set with the remote
control.
RECALL
PAGE
TV
VOL
TV
M
HPJ
PC
Power switch
VC
CHANNEL
PC CARD
EJECT
SD CARD
PUSH-EJECT
ACTION INPUT
VOLUME
PROG
3
Press to select the desired channel.
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
CH
CTIO
N
A
0
PIP MIN
REW
Press to turn the TV on (See page 19).
VOL
VOL
CH
MOVE
SWAP
Select the desired volume level.
A
SPLIT
4
CH
CTIO
N
PIP
SEARCH
OPEN/CLOSE
VOL
VOL
CH
Notes:
(1) The channel number and volume level remain the same even after
the TV is turned off.
(2) Power consumption and howling sound can be reduced if the volume
level is lowered.
20
VHF, UHF and Cable TV
Cable TV
When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4.
This does not apply when signal is input from VIDEO INPUT.
Ferrite core (large size)
(supplied)
ANTENNA TERMINAL ON
THE BACK OF THE TV
To Antenna
Input
Incoming Cable from Antenna
or Cable TV System.
VOLUME
Less than
4” (10 cm)
PC CARD
EJECT
SD CARD
PUSH-EJECT
ACTION INPUT
HPJ
CHANNEL
S-VIDEO VIDEO L AUDIO R
INPUT 3
PC
OUTPUT
INPUT
CABLE BOX
SAP
POWER
TV/VIDEO
LIG
H
E
UT
DVD
AUX
DTV
CBL
RC
VR
R
DB
S
EXIT
Confirm that registration with cable TV provider and connection of
equipment are completed. Turn the CABLE BOX on and select the desired
volume level.
CH
CTIO
VOL
PC
MENU
Confirming
N
A
TV
VC
T
M
T
ASPEC
VOL
1
CBL
2
POWER
CBL
to confirm.
CH
RECALL
PAGE
GUIDE
1
2
3
4
5
6
7
8
PROG
0
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
SPLIT
MOVE
Press while pointing the remote control towards
the CABLE BOX.
Note:
The remote control code number is set for
Panasonic products.
When peripheral equipment does not operate,
reset code (See page 62 - 63).
9
R-TUNE
PIP
Press
3
Operate the CABLE BOX and select the desired volume level.
SEARCH
OPEN/CLOSE
SWAP
21
Location of Controls
Illuminated Remote Control
Power button
Press to turn the TV ON or OFF (See page 19).
Note: The TV’s power cord must first be plugged into the wall outlet
and then turned on at the POWER switch (standby mode).
ASPECT button
Change of screen size (See page 52).
JUST
ZOOM
4:3
FULL
MUTE button
Press this button to mute the sound, press again to cancel the mute.
Mode Selection buttons
Selects the operation mode for the remote control. (See page 63)
Digital Video Disk Mode Selection for Remote Control
VCR Mode Selection for Remote Control
Aux Mode Selection for Remote Control
DVD
DTV
Operation of other Device
PIP MIN
PIP MAX
Buttons
REW
FF
Device
PIP Minimize/Maximize
TV
VCR REW/FF
VCR
22
VR
CBL
Receiver/Amplifier Mode Selection
for Remote Control
Digital Broadcasting Satellite for
Remote Control
Cable TV Mode Selection for Remote Control
S
Digital TV Mode Selection for Remote Control
R-TUNE
RC
DB
TV
TV Mode Selection for Remote Control
AUX
R
VC
R-TUNE button
Switches to previously viewed channel or video mode.
PAUSE
STOP
JPEG Viewer
-
-
PLAY
Pause
STOP
PLAY
CABLE/DBS
-
-
-
-
DVD/LD/CD
Skip Search REW/FF
PLAY
Pause
STOP
RCVR
Surround -/+
-
-
-
Buttons
Device
REC
FREEZE
TV/VCR
TV
VCR
CABLE/DBS
DVD/LD/CD
RCVR
-
PIP CH
VCR CH
PIP or SPLIT FREEZE PIP or SPLIT CH up/down
SEARCH
OPEN/CLOSE
PIP Search
VCR RECORD
TV/VCR Switch
VCR CH up/down
-
DBS RECORD
TV/DBS Switch
TV/DBS CH up/down
-
-
-
-
OPEN/CLOSE
-
-
-
-
Location of Controls
TV/VIDEO button
The input mode changes each time this button is pressed.
TV
COMPONENT 1
VIDEO 3
HDMI
COMPONENT 2
VIDEO 2
VIDEO 1
SAP button
Selects Audio mode (See page 33).
STEREO
SAP
MONO
SAP
Lights the remote control buttons.
The selected button blinks when lit.
POWER
TV/VIDEO
LIG
H
E
UT
T
DVD
AUX
DTV
CBL
RC
R
VR
Changes to the next channel up
Moves cursor upward during menu mode.
DB
CH
CTIO
VOL
EXIT
VOL
CH
PAGE
GUIDE
1
2
3
4
5
6
7
8
PROG
0
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
SPLIT
PC menu
Press the “PC”
input mode
selection button to
select the PC
input mode.
PC
MENU
VOL
CH
RECALL
Press to display
time, channel,
sleep timer and
other options.
Changes to the next channel down
Moves cursor downward during menu mode.
9
R-TUNE
PIP
CH
CTIO
VOL
RECALL
Increases volume
Moves cursor to
the right during
menu mode.
N
PC
MENU
Reduces volume
Moves cursor to the
left during menu
mode.
N
A
S
A
VC
TV
M
T
ASPEC
MOVE
SEARCH
OPEN/CLOSE
SWAP
Page up/down for DBS,
skip +/- for DVD & CD.
EXIT
PAGE
GUIDE
GUIDE button
for DBS.
Returns to normal viewing from the MENU screen.
Previous item in MENU.
Direct program number
selection buttons
PROG
PROG dash button
Program dash channel numbers for DTV and DBS.
Swap pictures in Split Screen and Picture in Picture operation
(See page 48, 51).
Move PIP frame in Picture in Picture Operation (See page 49).
Split Screen (see page 50)
Picture in Picture Operation (see page 48)
23
Basic Menu Operations
Press to display the menu screen.
CH
CTIO
N
A
1
VOL
VOL
Press to select desired menu icon.
CH
Press to enter submenu field.
2
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
: EXIT
VIVID
SET
: SUB MENU
PICTURE
PIC MODE
VIVID
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
SET
NORMAL
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
CH
CTIO
Press to select or adjust.
N
A
Press to select desired submenu feature.
VOL
VOL
CH
PICTURE
PIC MODE
VIVID
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NO
NORMAL
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
COLOR
35
PRESS ACTION TO RETURN
[ for OTHER ADJ.]
CH
CTIO
Press to enter option menu field.
N
A
Press to select OTHER ADJ.
VOL
VOL
CH
Proceed to selection and adjustment of
the option menu.
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
PRESS TO ENTER
PRESS ACTION FOR MAIN MENU
PICTURE
COLOR TEMP
COOL
NATURAL COLOR
ON
VIDEO NR
OFF
3D Y/C FILTER
ON
COLOR MATRIX
SD
VM
ON
FREEZE
SPLIT
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
Press to return.
CH
CTIO
PICTURE
PIC MODE
VIVID
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NO
NORMAL
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
N
A
To return to MAIN MENU: To return to previous screen:
VOL
VOL
CH
COLOR
35
PRESS ACTION TO RETURN
Press to exit from the MENU screen.
This returns the set to the normal
viewing condition.
CH
CTIO
N
A
To end adjustments:
VOL
VOL
CH
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
: EXIT
VIVID
SET
: SUB MENU
NORMAL PICTURE
24
Basic Menu Operations
PICTURE
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
: EXIT
: SUB MENU
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
PRESS TO ENTER
PRESS ACTION FOR MAIN MENU
STEREO SAP MONO
MODE
VIVID
SET
BASS
BASS
TREBLE
TREBLE
SET
NORMAL
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
NORMAL
OTHER ADJ.
OTHEAJ.
PRESS TO ENTER
PRESS ACTION FOR MAIN MENU
CHANNELS
ALL
ENTER CHANNEL 3
FAVORITE CHANNELS
2
5
8
10
18 25
: ADD
: DELETE
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
CHANNELS
HDMI IN
AUTO
AI SOUND
ON
BBE VIVA 3D
ON
BBE
ON
SURROUND
3D
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
CHANNELS
CH. SCAN
FAVORITES
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
AUDIO
BALANCE
BALANCE
AUDIO
COLOR TEMP NORMAL
NATURAL COLOR
ON
VIDEO NR
OFF
3D Y/C FILTER
ON
COLOR MATRIX
SD
FREEZE
SPLIT
AUDIO
AUDIO
MODE
PICTURE
CHANNELS
PRESET CAPTION
ABC
A&E
CBS
AMC
FOX
BET
NBC
BRAVO
PBS
CNBC
CNN
CNN/SI
ESPN
COMEDY
HBO
COURT
PRESS FOR MORE CHANNELS
PRESS ACTION TO RETURN
CHANNELS
CH. SCAN
PRESET CAPTION
FAVORITES
MANUAL CAPTION
INPUT LABEL
OTHER ADJ.
PRESS TO ENTER
PRESS ACTION FOR MAIN MENU
OTHER ADJ.
PRESS ACTION TO RETURN
CHANNELS
CHANNELS
INPUT LABEL
COMPONENT1
COMPONENT2
HDMI
VIDEO1
VIDEO2
VIDEO3
MANUAL CAPTION
ENTER CHANNEL
10
ENTER CAPTION
TO MOVE CURSOR
TO SELECT CHANNEL
TO MOVE CURSOR
TO SELECT LEBEL
PRESS ACTION TO RETURN
PRESS ACTION TO RETURN
TIMER
TIMER
SLEEP
DAY
NO
TIMER1
TIMER1
TIMER
MON FRI
ON TIME
TIMER2
OFF TIME
CLOCK SET
ENTER CHANNEL
SET
TIMER
PRESS ACTION FOR MAIN MENU
PRESS ACTION TO RETURN
LOCK
CREATE
CODE FIRST
CLOCK SET
NO
PRESS ACTION TO RETURN
LOCK
LOCK
LOCK SET
V - CHIP SET
ENTER CODE
OFF
BLOCK PROGRAMS :
U.S. MOVIES
SESTTING:
HOW LONG?
LOCK
CODE
PRESS ACTION FOR MAIN MENU
SET UP
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
PRESS
ENGLISH
ANT1
NO
OFF
TO ENTER
SET UP
PRESS ACTION FOR MAIN MENU
PRESS ACTION FOR MAIN MENU
SET UP
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON OFF
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
12HOURS
CHANG CODE
PRESS ACTION FOR MAIN MANU
MANUAL PROGRAM
ENTER CHANNEL
3
TO ADD
TO DELETE
PRESS ACTION TO RETURN
25
SET UP Operation
MENU Languages
In SET UP Menu, select IDIOMA / LANGUE to change menu language to
ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French).
CH
CTIO
N
A
Press to select IDIOMA / LANGUE.
VOL
VOL
SET UP
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
ENGLISH
ANT1
NO
OFF
Press to select ENGLISH, SPANISH or FRENCH.
CH
PRESS ACTION FOR MAIN MENU
ENGLISH
ANTENNA Selection
To select either ANT1 or ANT2.
SET UP
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
CH
CTIO
Press to select ANT1 or ANT2.
N
A
Press to select ANTENNA.
VOL
VOL
ANT1
ENGLISH
ANT1
NO
OFF
ANT2
PRESS ACTION FOR MAIN MENU
CH
cc ON MUTE cc MODE (Closed Captions)
This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form
of written words across the screen (white or colored letters on a black background). It allows the viewer to read the
dialogue of a television program or other information.
cc ON MUTE
Activates the On-Screen Closed Caption feature, when the MUTE button on the Remote Control is pressed. To deactivate,
press the MUTE button again.
Note:
This feature functions when the Closed Caption Mode is in the “OFF” position. The program being viewed must be
broadcast with Closed Caption.
CH
CTIO
SET UP
Press to select from the following:
N
A
Press to select cc ON MUTE.
VOL
VOL
NO (OFF)
C1
C2
C3
C4
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
ENGLISH
ANT1
NO
OFF
CH
PRESS ACTION FOR MAIN MENU
26
SET UP Operation
cc MODE
Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in
this menu.
SET UP
CH
CTIO
Press to select from the following:
N
A
Press to select cc MODE.
VOL
VOL
OFF
C1
C2
T1
T2
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
ENGLISH
ANT1
NO
OFF
CH
T4
T3
C4
C3
PRESS ACTION FOR MAIN MENU
• CAPTION OFF - Recommended mode when Closed Caption is not being used.
• CAPTION C1 For video related information that can be displayed (up to 4 lines of script strategically placed on
the television screen so that it does not obstruct relevant parts of the picture).
• CAPTION C2 Another mode used for video related information.
• TEXT T1 Blanks out a large portion of the picture on the television screen, and displays program guide or
any other information currently being transmitted.
• TEXT T2 Another mode which displays information and blanks out a large portion of the picture on the
television screen.
• CAPTION C3 Another mode used for video related information.
• CAPTION C4 Another mode used for video related information.
• TEXT T3 Another mode which displays information and blanks out a large portion of the picture on the
television screen.
Another mode which displays information and blanks out a large portion of the picture on the
• TEXT T4 television screen.
Notes:
(1) Recommended menu Set Up for Closed Caption when using Mute Button.
cc ON MUTE: C1
cc MODE:
OFF
(2) The setting for CC ON MUTE is valid only when the CC MODE is OFF. CC MODE set to ON will override CC ON MUTE.
This menu cannot be selected when the MAIN picture is displaying a COMPONENT VIDEO INPUT of 480i or more.
(3) When aspect is ZOOM, Closed Caption cannot be used.
Selecting option menus in OTHER ADJ.
To select option menus in OTHER ADJ.
SET UP
Press to select OTHER ADJ.
CH
CTIO
Press to enter option menu field.
N
A
1
VOL
VOL
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
PRESS
TO ENTER
CH
PRESS ACTION FOR MAIN MENU
Press to select desired option menu.
CH
CTIO
N
A
2
VOL
VOL
CH
Proceed to adjustments.
SET UP
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON OFF
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
27
SET UP Operation
MODE Selection
To select either CABLE or TV.
CH
CTIO
Press to select CABLE or TV.
N
A
Press to select MODE.
VOL
VOL
CABLE
TV
CH
SET UP
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON OFF
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
AUTO PROGRAM
To automatically program all channels with signal.
CH
CTIO
Press to start AUTO PROGRAM.
N
A
Press to select AUTO PROGRAM.
VOL
VOL
CH
SET UP
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON OFF
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
MANUAL PROGRAM
To manually add or delete channels.
Press to select MANUAL PROGRAM.
CH
CTIO
N
A
1
VOL
VOL
Press to display next menu.
CH
2
1
2
3
4
5
6
7
8
9
Use remote numeric keypad to select
desired channel.
SET UP
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON
CHAN BANNER
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
MANUAL PROGRAM
ENTER CHANNEL
0
3
TO ADD
TO DELETE
Press to ADD or DELETE the channel.
CH
CTIO
N
A
3
VOL
VOL
CH
28
PRESS ACTION TO RETURN
SET UP Operation
AUTO POWER ON
Select SET to power up the TV at the same time as the cable box or other components or select OFF.
CH
CTIO
SET UP
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON SET
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
Press to select SET or OFF.
N
A
Press to select AUTO POWER ON.
VOL
VOL
SET
OFF
CH
CHAN BANNER
Select ON to display the CHANNEL BANNER on the screen or select OFF.
SET UP
CH
CTIO
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON SET
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
Press to select ON or OFF.
N
A
Press to select CHAN BANNER.
VOL
VOL
ON
CH
OFF
SIDE BAR
Do not display a picture in 4:3 mode for an extended period, as
this can cause an after-image to remain on the side bars on
either side of the display field.
To prevent the appearance of such an after-image, change the
brightness of the side bars.
side bars
4:3
Screen Display
after-images
SET UP
CH
CTIO
N
A
Press to select the
SIDE BAR.
VOL
VOL
CH
Press to select
OFF, DARK, MID, BRIGHT.
OFF
DARK
MID
BRIGHT
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON SET
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
Notes:
• Setting the side bar to bright mode for an extended period may result in occurence of after-images.
• The side bar may flash (alternate black/white) depending on the picture being shown on the screen. In such
an occurrence, use the Cinema mode.
29
SET UP Operation
POWER SAVE
When this function is turned ON, luminous level of plasma TV is suppressed, so power consumption is reduced.
SET UP
CH
CTIO
VOL
MODE
CABLE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON OFF
CHAN BANNER
ON
OTHER ADJ.
SIDE BAR
BRIGHT
POWER SAVE
OFF
PRESS ACTION TO RETURN
Press to select ON or OFF.
N
A
Press to select POWER SAVE.
VOL
ON
OFF
CH
PICTURE Adjustment
PICTURE MODE
CH
CTIO
Press to select your desired PICTURE MODE.
N
A
Press to select PIC MODE.
VOL
VOL
VIVID
STANDARD
CH
AUTO
CINEMA
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
: EXIT
VIVID
SET
: SUB MENU
Press to select each submenu (COLOR / TINT /
BRIGHTNESS / PICTURE / SHARPNESS /
NORMAL).
CH
CTIO
N
A
COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL
VOL
VOL
Press to adjust the desired level by looking at the
picture behind the menu.
CH
Item
30
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
: EXIT
Function
COLOR
Adjusts desired color intensity.
TINT
Adjusts natural flesh tones.
BRIGHTNESS
Adjusts dark areas of picture.
PICTURE
Adjusts white areas of picture.
SHARPNESS
Adjusts clarity of outline detail.
NORMAL
Resets all picture adjustments to factory default settings.
VIVID
SET
: SUB MENU
PICTURE Adjustment
Selecting option menus in OTHER ADJ.
To select option menus in OTHER ADJ.
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
PRESS TO ENTER
PRESS ACTION FOR MAIN MENU
Press to select OTHER ADJ.
CH
CTIO
Press to enter option menu field.
N
A
1
VOL
VOL
CH
PICTURE
Press to select desired option menu.
COLOR TEMP NORMAL
NATURAL COLOR
ON
VIDEO NR
OFF
3D Y/C FILTER
ON
COLOR MATRIX
SD
FREEZE
SPLIT
CH
CTIO
N
A
2
VOL
VOL
Proceed to adjustments.
CH
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
COLOR TEMP (Temperature) / NATURAL COLOR / VIDEO NR / 3D Y/C FILTER
PICTURE
COLOR TEMP NORMAL
NATURAL COLOR
ON
VIDEO NR
OFF
3D Y/C FILTER
ON
COLOR MATRIX
SD
FREEZE
SPLIT
CH
CTIO
N
A
Press to select each option menu (COLOR TEMP
/ NATURAL COLOR / VIDEO NR / 3D Y/C FILTER).
VOL
VOL
Press to adjust the desired level by looking at the
picture behind the menu.
CH
Item
Mode
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
NATURAL COLOR
ON
OFF
VIDEO NR
ON
OFF
Explanations
To increase or decrease WARM (red) and COOL
(blue) colors to suit personal preferences.
To increase the color reproduction range with natural
color gradation and highly delicate hues.
Reduces noise in the channel,commonly called
snow. Remains off when receiving a strong signal.
3D Y/C FILTER
ON
OFF
Minimizes noise and cross color in the picture.
NORMAL
COLOR TEMP
(temperature)
WARM
COOL
COLOR MATRIX
Displays input signals (480p signals) in a natural color from digital equipment adaptors connected to COMPONENT VIDEO
INPUT (Y, Pb/Cb ,Pr/Cr input terminals).
Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition).
CH
CTIO
Press to select SD or HD.
N
A
Press to select COLOR MATRIX.
VOL
VOL
CH
SD : When the input signal is a normal TV
system (NTSC).
HD : When the input signal is a High-Definition
system (ATSC).
PICTURE
COLOR TEMP NORMAL
NATURAL COLOR
ON
VIDEO NR
OFF
3D Y/C FILTER
ON
COLOR MATRIX
SD
FREEZE
SPLIT
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
Note:
(1) When viewing a non-standard DTV signal format, you can change color parameters manually for the best picture quality.
(2) COLOR MATRIX does not need to be set when using High-Definition equipment or 480i output equipment. Use only for 480p signal source.
31
PICTURE Adjustment
FREEZE
Select SPLIT or PIP to determine the frozen picture frame during single screen.
PICTURE
COLOR TEMP NORMAL
NATURAL COLOR
ON
VIDEO NR
OFF
3D Y/C FILTER
ON
COLOR MATRIX
SD
FREEZE
SPLIT
Press to select FREEZE.
CH
CTIO
Press to select SPLIT or PIP.
N
A
1
VOL
VOL
SPLIT
PIP
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
CH
2
FREEZE
TV/VCR
When the screen is single press
FREEZE
TV/VCR
to freeze the screen.
FREEZE
When FREEZE SPLIT is selected.
3
FREEZE
TV/VCR
Notes:
(1) When
Press
FREEZE
TV/VCR
FREEZE
TV/VCR
FREEZE
TV/VCR
When FREEZE PIP is selected.
again to recover.
is pressed during Split Screen, the Split Screen will be frozen and the main picture continues action (see page 50).
Main Picture
(2) When
FREEZE
Split Screen
(FREEZE)
is pressed during PIP Operation, the PIP frame will be frozen and the main picture continues action (see page 49).
Main Picture
PIP frame
(FREEZE)
Notes:
(1) The frozen screen will be recovered automatically after 3 minutes.
(2) When it operates ASPECT with PIP operation, it cancels freeze condition in PIP frame.
32
Audio Adjustment
Selecting STEREO/SAP/MONO
CH
CTIO
N
A
Press to select MODE.
VOL
VOL
CH
AUDIO
Press to select STEREO / SAP / MONO.
Red display - Signal available
White display - Signal not available
Note:
AUDIO MODE selection is also possible by pressing the
button on the remote control (see page 23).
MODE
STEREO SAP MONO
BASS
TREBLE
BALANCE
SET
NORMAL
SAP
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
Helpful Hints:
STEREO - Two channel Audio reception.
• SAP
- Second Audio Programming (typically used for bilingual audio).
• MONO
- Use when stereo signal is weak.
•
Selecting BASS / TREBLE / BALANCE / NORMAL
Press to select BASS / TREBLE / BALANCE / NORMAL.
AUDIO
CH
CTIO
Press to adjust the desired level by listening to the sound.
N
A
MODE
VOL
STEREO SAP MONO
BASS
TREBLE
BALANCE
VOL
NORMAL
CH
SET
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
Item
Effect
BASS
Less
More
Function
Increase or decrease the bass response.
TREBLE
Less
More
Increase or decrease the treble response.
BALANCE
Left SP.
Right SP.
Emphasize the left / right speaker volume.
NORMAL
Reset BASS, TREBLE and BALANCE adjustments to factory default settings.
NO
Selecting option menus in OTHER ADJ.
To select option menus in OTHER ADJ.
Press to select OTHER ADJ.
1
AUDIO
MODE
Press to enter option menu field.
N
A
BASS
CH
CTIO
VOL
OTHER ADJ.
OTHEAJ.
PRESS TO ENTER
PRESS ACTION FOR MAIN MENU
Press to select desired option menu.
A
N
VOL
AUDIO
HDMI IN
AUTO
AI SOUND
ON
BBE VIVA 3D
OFF
BBE
OFF
SURROUND
OFF
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
CH
CTIO
VOL
BALANCE
NORMAL
VOL
CH
2
TREBLE
Proceed to adjustments.
CH
HDMI IN
Perform input switching of analog audio input (for DVI) and digital audio input (for HDMI) when using the HDMI terminal.
Press to select HDMI IN.
AUDIO
CH
CTIO
Press to select your desired mode.
N
A
HDMI IN
VOL
VOL
CH
AUTO
DIGITAL
ANALOG
AUTO : Automatically performs digital/analog input switching according to the input signal type.
DIGITAL : Forces use of digital audio input signal transmitted via the HDMI terminal.
ANALOG : Forces use of analog audio input signal transmitted via separate RCA terminals.
HDMI IN
AUTO
AI SOUND
ON
BBE VIVA 3D
OFF
BBE
OFF
SURROUND
OFF
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
33
Audio Adjustment
AI SOUND
Equalize overall volume levels across all channels.(AI sound is not available in VIDEO mode).
Press to select AI SOUND.
AUDIO
CH
CTIO
N
A
AI SOUND
VOL
VOL
CH
HDMI IN
AUTO
AI SOUND
ON
BBE VIVA 3D
OFF
BBE
OFF
OFF
SURROUND
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
Press to select ON or OFF.
ON
OFF
Note: Al SOUND is not available in VIDEO mode.
BBE VIVA / BBE
The distinguishing feature of BBE VIVA is its maintenance of accurate audio imagery. Ordinary 3D surround systems force the
sound out to the left and right, affecting the center channel. As a result it may become hard to hear people's voices, or the center
audio may completely disappear. BBE VIVA reproduces vocals in music and voices in movies accurately and distinctly.
BBE VIVA
This maintains a constant level of sound that is faithful to the original, producing
Hi-Fi 3D sound that cannot be obtained with other types of 3D Surround.
Use special signal processing to accurately reproduce the "attack" of each
sound, in order to make it immediate and superbly faithful to the original,
while retaining its natural feel.
Press to select BBE VIVA [ With BBE VIVA Version]
or BBE [ No BBE VIVA Version].
CH
CTIO
VOL
HDMI IN
AUTO
AI SOUND
ON
BBE VIVA 3D
ON
BBE
ON
SURROUND
3D
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
[ With BBE VIVA Version]
N
A
BBE
AUDIO
AUDIO
VOL
HDMI IN
AUTO
AI SOUND
ON
OFF
BBE VIVA 3D
BBE
OFF
SURROUND
OFF
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
Press to select ON or OFF.
CH
ON
OFF
Notes:
• When “BBE VIVA” is set to ON, “BBE” and “SURROUND” setting are fixed to ON.
• When “BBE VIVA” is set to OFF, “BBE” and “SURROUND” can be set individually.
[ No BBE VIVA Version]
SURROUND
CH
CTIO
N
A
To enjoy a concert hall effect, turn the SURROUND to ON.
SURROUND function is effective when BBE VIVA is set to OFF.
Press to select SURROUND.
VOL
VOL
HDMI IN
AUTO
AI SOUND
ON
OFF
BBE VIVA 3D
BBE
OFF
SURROUND
OFF
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
Press to select ON or OFF.
ON
OFF
Notes:
When a stereo signal is available :
When audio signal is monoural :
CH
AUDIO
SURROUND
SURROUND
set to ON.
set to OFF.
SPEAKERS
CH
CTIO
VOL
AUDIO
HDMI IN
AUTO
AI SOUND
ON
BBE VIVA 3D
OFF
BBE
OFF
SURROUND
OFF
SPEAKERS
ON
OTHER ADJ.
PRESS ACTION TO RETURN
Press to select your desired mode.
N
A
Select the desired SPEAKER mode.
Press to select SPEAKERS.
VOL
ON
OFF & VARIABLE AUDIO OUT
CH
OFF & FIXED AUDIO OUT
Mode
34
Function
ON
TV speakers operate normally.
OFF & Variable Audio Out
TV speakers off -audio adjustable by television.
OFF & Fixed Audio Out
TV speakers off -audio adjustable by the external amplifier only.
CHANNELS Adjustment
CHANNEL SCAN
Let you select the channel scanning mode either FAV or ALL.
CHANNEL SCAN FAV
CHANNEL SCAN ALL
To enter up to 16 favorite channels.
To scan all channels when using the CH up/down buttons.
CHANNELS
Press to select CH. SCAN.
CH
CTIO
CH. SCAN
FAVORITES
Press to select FAV or ALL.
A
N
VOL
VOL
FAV
ALL
ALL
ENTER CHANNEL
3
FAVORITE CHANNELS
2
5
8
10
18 25
: ADD
: DELETE
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
CH
FAVORITE CHANNELS Selection
1
CH
CTIO
VOL
CHANNELS
CH. SCAN
FAVORITES
N
A
Press to select FAVORITES.
VOL
CH
ALL
ENTER CHANNEL
3
FAVORITE CHANNELS
2
5
8
10
18 25
: ADD
: DELETE
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
2
1
2
CHANNELS
3
4
5
6
7
8
9
Use remote numeric keypad to select desired
channel.
CH. SCAN
FAVORITES
0
ALL
ENTER CHANNEL 15
FAVORITE CHANNELS
2
5
8
10
18 25
: ADD
: DELETE
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
(Example: Channel 15 is selected)
Press
channel.
CH
CTIO
to add or
to delete the selected
VOL
CHANNELS
CH. SCAN
FAVORITES
N
A
3
VOL
CH
ALL
ENTER CHANNEL 15
FAVORITE CHANNELS
2
5
8
10
15 18 25
: ADD
: DELETE
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
(Example: Channel 15 is added)
4
2
3
Repeat step 2 to 3 up to 16 favorite channels.
35
CHANNELS Adjustment
Selecting option menus in OTHER ADJ.
To select option menus in OTHER ADJ.
Press to select OTHER ADJ.
1
CHANNELS
CH. SCAN
CH
CTIO
A
N
Press to enter option menu field.
VOL
FAVORITES
VOL
CH
OTHER ADJ.
PRESS TO ENTER
PRESS ACTION FOR MAIN MENU
Press to select desired option menu.
CHANNELS
PRESET CAPTION
CH
CTIO
MANUAL CAPTION
N
A
2
VOL
VOL
INPUT LABEL
CH
Proceed to adjustments.
OTHER ADJ.
PRESS ACTION TO RETURN
PRESET CAPTION
Assign channel numbers to pre-set popular TV stations.
CHANNELS
Press to select PRESET CAPTION.
VOL
INPUT LABEL
VOL
Press to display next menu.
CH
OTHER ADJ.
PRESS ACTION TO RETURN
Press to select desired PRESET CAPTION.
CHANNELS
PRESET CAPTION
ABC
A&E
CBS
AMC
FOX
BET
NBC
BRAVO
PBS
CNBC
CNN
CNN/SI
ESPN
COMEDY
HBO
COURT
PRESS FOR MORE CHANNELS
PRESS ACTION TO RETURN
CH
CTIO
N
A
2
VOL
VOL
CH
3
1
2
3
4
5
6
7
8
9
0
36
PRESET CAPTION
MANUAL CAPTION
CH
CTIO
N
A
1
Use remote numeric keypad to select desired
channel (refer to your local TV guide).
Note:
To delete a channel, press
highlighted.
VOL while channel is
CHANNELS Adjustment
MANUAL CAPTION
Enter channel numbers and captions manually.
Press to select MANUAL CAPTION.
1
Press to display next menu.
A
N
VOL
CHANNELS
PRESET CAPTION
CH
CTIO
MANUAL CAPTION
INPUT LABEL
VOL
CH
Press to enter desired channel.
CH
CTIO
N
A
2
VOL
OTHER ADJ.
PRESS ACTION TO RETURN
CHANNELS
VOL
OR
CH
MANUAL CAPTION
ENTER CHANNEL
10
ENTER CAPTION
1
2
3
4
5
6
7
8
9
Use remote numeric keypad to select desired
channel (refer to your local TV guide).
TO MOVE CURSOR
TO SELECT CHANNEL
PRESS ACTION TO RETURN
0
Press to select ENTER CAPTION.
3
CHANNELS
CH
CTIO
ENTER CHANNEL
N
A
MANUAL CAPTION
VOL
VOL
TO MOVE CURSOR
TO SELECT CHARACTER
CH
Press to select characters.
4
VOL
PRESS ACTION TO RETURN
CHANNELS
CH
CTIO
MANUAL CAPTION
N
A
10
ENTER CAPTION
VOL
ENTER CHANNEL
ENTER CAPTION
CH
Press to move cursor.
Repeat Step 4 up to 4 characters.
Note:
In MANUAL CAPTION up to 4 characters can be selected as a CAPTION.
10
:/5A
TO MOVE CURSOR
TO SELECT CHARACTER
PRESS ACTION TO RETURN
INPUT LABEL
Label video input connections to display optional equipment.
CHANNELS
PRESET CAPTION
Press to select INPUT LABEL.
VOL
VOL
Press to display next menu.
OTHER ADJ.
PRESS ACTION TO RETURN
CH
Press to move cursor.
2
CH
CTIO
N
A
MANUAL CAPTION
INPUT LABEL
CH
CTIO
N
A
1
VOL
VOL
CH
Press to select desired LABEL.
Note:
To skip, select LABEL, then press
VOL or VOL
to
select ‘‘SKIP’’. The selected INPUT mode will be skipped
when TV/VIDEO button is pressed.
CHANNELS
INPUT LABEL
COMPONENT1
VCR
COMPONENT2
HDMI
VIDEO1
VIDEO2
VIDEO3
TO MOVE CURSOR
TO SELECT LEBEL
PRESS ACTION TO RETURN
37
TIMER
The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust if
necessary. Then set TIMER1 and TIMER2.
SLEEP
SLEEP sets the sleep time.
Press to select SLEEP.
TIMER
SLEEP
CH
CTIO
N
A
NO
TIMER1
VOL
VOL
Press to select the desired sleep time.
To turn off the timer select NO.
TIMER2
CLOCK SET
CH
NO
30
60
90
PRESS ACTION FOR MAIN MENU
TIMER1 and TIMER2
In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on
selected days.TIME must be entered in CLOCK SET to operate the TIMER features.
Press to select TIMER1 or TIMER2.
TIMER
CH
CTIO
TIMER1
PRESS
TO ENTER
TIMER2
PRESS
TO ENTER
N
A
SLEEP
VOL
VOL
Press to enter.
CLOCK SET
CH
PRESS ACTION FOR MAIN MENU
DAY
VOL
TIMER
DAY
TIMER1
CH
CTIO
N
A
Set the day of the week.
Press to select DAY.
VOL
Press to set the day of the week.
(select day or days)
MON FRI
ON TIME
OFF TIME
ENTER CHANNEL
SET
NO
CH
PRESS ACTION TO RETURN
ON TIME
Set the time of day.
Press to select ON TIME.
VOL
TIMER1
MON
ON TIME
1 2 : 0 0 PM
FRI
OFF TIME
CH
CTIO
Press to set hours AM or PM.
N
A
1
TIMER
DAY
ENTER CHANNEL
SET
VOL
NO
PRESS ACTION TO RETURN
CH
TIMER
Press to move to minutes position.
2
CH
CTIO
VOL
MON
ON TIME
1 2 : 0 0 PM
FRI
OFF TIME
ENTER CHANNEL
VOL
CH
38
Press to set minutes.
N
A
TIMER1
DAY
SET
PRESS ACTION TO RETURN
NO
TIMER
OFF TIME
Set the time of day.
Press to select OFF TIME.
CH
CTIO
Press to set hours AM or PM.
N
A
1
VOL
TIMER
TIMER1
VOL
DAY
MON
ON TIME
1 2 : 0 0 PM
OFF TIME
1 3 : 0 0 PM
FRI
ENTER CHANNEL
CH
SET
NO
PRESS ACTION TO RETURN
Press to move to minutes position.
CH
CTIO
Press to set minutes.
N
A
2
VOL
TIMER
TIMER1
VOL
DAY
MON
ON TIME
1 2 : 0 0 PM
OFF TIME
1 3 : 0 0 PM
FRI
ENTER CHANNEL
CH
SET
NO
PRESS ACTION TO RETURN
ENTER CHANNEL
Press to select ENTER CHANNEL.
CH
CTIO
Press to select channel.
N
A
1
VOL
TIMER
TIMER1
VOL
DAY
MON
ON TIME
1 2 : 0 0 PM
OFF TIME
1 3 : 0 0 PM
ENTER CHANNEL
CH
SET
FRI
5
NO
PRESS ACTION TO RETURN
Press to select SET.
CH
CTIO
Press to select YES.
N
A
2
VOL
VOL
YES
NO
CH
TIMER
TIMER1
DAY
MON
ON TIME
1 2 : 0 0 PM
OFF TIME
1 3 : 0 0 PM
ENTER CHANNEL
SET
FRI
5
NO
PRESS ACTION TO RETURN
TIMER Activation
The TIMER is active when the television is OFF or
ON. The television will switch to the selected
channel at the selected time set in the TIMER.
Turn Off After 90 Minutes
The television automatically turns OFF after 90
minutes when turned ON by the TIMER. If the OFF
time is selected or if a key is pressed, the automatic
OFF after 90 minutes will be cancelled.
Notes:
(1) When the power to the TV set is disrupted due to a power outage or similar problem, after power is restored, the offtimer will be deactivated and the TV will be in standby mode.
(2) To see the remaining sleep time, press the RECALL button.
39
TIMER
CLOCK SET
CLOCK SET sets the present time. This is necessary to operate the TIMER features.
1
Press to select CLOCK SET.
TIMER
CH
CTIO
TIMER1
N
A
SLEEP
VOL
VOL
Press to enter.
TIMER2
CLOCK SET
PRESS
TO ENTER
CH
PRESS ACTION FOR MAIN MENU
2
TIME
Set the time of day.
TIMER
CH
CTIO
N
A
Press to set hours AM or PM.
VOL
VOL
CLOCK SET
1 2 : 0 0 AM
SUN
CH
PRESS ACTION TO RETURN
3
CH
CTIO
VOL
TIMER
Press to set minutes.
N
A
Press to move to minutes position.
VOL
CLOCK SET
1 2 : 3 0 PM
SUN
CH
PRESS ACTION TO RETURN
4
DAY
Set the day of the week.
TIMER
CH
CTIO
VOL
CLOCK SET
1 2 : 3 0 PM
VOL
CH
40
Press to select the day of the week.
N
A
Press to move to DAY position.
PRESS ACTION TO RETURN
SUN
LOCK Feature
CREATE CODE FIRST
To use LOCK options CREATE CODE FIRST.
1
2
3
4
5
6
7
8
9
LOCK
Use the remote numeric keypad to enter a four-digit
secret code.
While entering a code, by pressing the up
button you can input a new code again.
or down
After entering your secret code for the first time, the
onscreen display will change to ENTER CODE.
0
CREATE
CODE FIRST
PRESS ACTION FOR MAIN MENU
LOCK
ENTER CODE
Notes:
PRESS ACTION FOR MAIN MENU
(1) Use a code that is easy to remember and record it in a safe place.
(2) If you do not remember your code, LOCK will unlock in 12, 24, or 48 hours, depending on the current setup. Be cautious
when selecting ALWAYS. If ALWAYS is selected, and you forget your secret code, the TV must be serviced by a
qualified technician to clear the LOCK setup.
CODE
If you select CODE, and you change your code from the one used in the CREATE CODE FIRST or ENTER CODE, your
new code becomes the controlling code.
CH
CTIO
LOCK
1
2
3
4
5
6
7
8
9
Use the remote numeric
keypad to enter a fourdigit secret code.
N
A
Press to select CODE.
VOL
VOL
CH
LOCK SET
V-CHIP SET
HOW LONG?
CODE
0
OFF
BLOCK PROGRAMS :
U.S. MOVIES
SETTING:
12HOURS
CHANGE CODE
PRESS ACTION FOR MAIN MENU
LOCK SET
Select LOCK SET to prevent video games and VCR tapes from being viewed.
CH
CTIO
VOL
LOCK
LOCK SET
V-CHIP SET
Press to select from the following.
N
A
Press to select LOCK SET.
VOL
OFF
GAME
CHANNEL
ALL
HOW LONG?
OFF
BLOCK PROGRAMS :
U.S. MOVIES
SETTING:
12HOURS
CH
CODE
MODE
Function
OFF
Turns Lock function off.
GAME
Lock CH 3, 4 and Video inputs.
CHANNEL
Lock up to four channels.
ALL
Locks all channels and video inputs.
CHANGE CODE
PRESS ACTION FOR MAIN MENU
41
LOCK Feature
CHANNEL
Press to select CHANNEL.
1
LOCK
CHANNEL
CH
CTIO
LOCK THESE CHANNELS
N
A
LOCK MODE
VOL
1
VOL
124
TO MOVE CURSOR
TO SELECT LOCK MODE
CH
PRESS ACTION TO RETURN
Press to select channel position.
CH
CTIO
VOL
VOL
Press to select channels.
(Or use remote numeric keypad to select channels.)
CH
1
2
3
4
5
6
7
8
9
0
3
LOCK
CHANNEL
LOCK MODE
N
A
2
LOCK THESE CHANNELS
1
124
TO MOVE CURSOR
TO SELECT CHANNEL
PRESS ACTION TO RETURN
Repeat step 2 for up to four channels.
V-CHIP SET
In the United States and Canada, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and TV
PARENTAL GUIDELINES. Its function is to block programs by following the rating data in the XDS data packets sent from
broadcasting stations. The user can select which rating programs should be blocked by using the LOCK MENU options.
1
CH
CTIO
Press to select from the following.
LOCK
LOCK SET
V-CHIP SET
N
A
Press to select V-CHIP SET.
VOL
VOL
HOW LONG?
CH
CODE
U.S. MOVIES
CANADIAN FRENCH
2
U.S. TV PROGRAMS
A
Press to enter SETTING.
LOCK
LOCK SET
V-CHIP SET
VOL
HOW LONG?
CH
CHANGE CODE
CANADIAN ENGLISH
N
VOL
12HOURS
PRESS ACTION FOR MAIN MENU
Press to select SETTING.
CH
CTIO
OFF
BLOCK PROGRAMS :
U.S. MOVIES
SETTING:
CODE
OFF
BLOCK PROGRAMS :
U.S. MOVIES
SETTING:
12HOURS
CHANGE CODE
PRESS ACTION FOR MAIN MENU
42
LOCK Feature
U.S. TV PROGRAMS
This TV model features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block
various types of TV programs. PIP will also be blocked automatically.
U.S. TV PROGRAMS RATING CHART
Press to select U.S. TV PROGRAMS.
CH
CTIO
Press to select U.S. TV PROGRAMS ON or OFF.
N
A
1
VOL
VOL
ON
OFF
LOCK
ON
U. S TV PROGRAMS
YES
VIEW NR PROGRAMS?
BASIC
SETTING:
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L
PRESS ACTION TO RETURN
CH
Press to select VIEW NR PROGRAMS?.
CH
CTIO
Press to select VIEW NR PROGRAMS? YES or NO.
N
A
2
VOL
VOL
YES
NO
YES: NR programs will be received.
NO: NR programs will be blocked.
CH
Press to select SETTING.
CH
CTIO
N
A
3
VOL
VOL
CH
Press to select BASIC or DETAILED.
BASIC:
Allows you to select only general ratings
such as TV-Y, TV-PG, etc.
DETAILED: Allows you to select both general ratings
and content such as V, L, etc.
Note: See Customer Caution.
Press to move between different ratings.
CH
CTIO
N
A
4
VOL
VOL
CH
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Perform Step 4 for each rating.
Note: See the U.S. TV PROGRAMS RATINGS CHART.
LOCK
ON
U. S TV PROGRAMS
YES
VIEW NR PROGRAMS?
BASIC
SETTING:
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L
PRESS ACTION TO RETURN
LOCK
ON
U. S TV PROGRAMS
YES
VIEW NR PROGRAMS?
BASIC
SETTING:
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L
PRESS ACTION TO RETURN
LOCK
ON
U. S TV PROGRAMS
YES
VIEW NR PROGRAMS?
BASIC
SETTING:
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L
PRESS ACTION TO RETURN
U.S. TV PROGRAMS RATINGS CHART
NR
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
FV
V
S
L
D
Not Rated. SEE CUSTOMER CAUTION on the next page.
All children. The themes and elements in this program are specifically designed for a very
young audience, including children from ages 2-6.
Directed to older children. Themes and elements in this program may include mild physical or
comedic violence, or may frighten children under the age of 7.
General audience. It contains little or no violence, no strong language, and little or no sexual dialogue or situations.
Parental guidance suggested. The program may contain infrequent coarse language, limited
violence, some suggestive sexual dialogue and situations.
Parents strongly cautioned. This program may contain sophisticated themes, sexual content,
strong language and more intense violence.
Mature audiences only. This program may contain mature themes, profane language, graphic
violence, and explicit sexual content.
FANTASY/CARTOON VIOLENCE
VIOLENCE
SEX
OFFENSIVE LANGUAGE
DIALOGUE WITH SEXUAL CONTENT
43
LOCK Feature
Customer Caution
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and
none) per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and
possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of
programming:”
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
• Locally originated programming • News • Political • Public Service Announcements • Religious • Sports
• Weather
U.S. MOVIES
This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or
video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will
also be blocked automatically.
U.S. MOVIES RATING CHART
Press to select U.S. MOVIES.
CH
CTIO
Press to select U.S. MOVIES ON or OFF.
N
A
1
VOL
ON
VOL
OFF
CH
LOCK
U. S MOVIES
OFF
VIEW NR PROGRAMS?
G
PG
PG-13
R
NC-17
X
YES
PRESS ACTION TO RETURN
2
CH
CTIO
Press to select VIEW NR PROGRAMS? YES or NO.
N
A
Press to select VIEW NR MOVIES?.
VOL
VOL
CH
YES
NO
Note:
Some movies are not rated for a variety of reasons.
Old movies and foreign films are usually not rated.
Press to move between different ratings.
CH
CTIO
N
A
3
VOL
VOL
CH
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Continue Step 3 for each ratings.
Note: See the U.S. MOVIES RATINGS CHART.
LOCK
U. S MOVIES
OFF
VIEW NR PROGRAMS?
G
PG
PG-13
R
NC-17
X
YES
PRESS ACTION TO RETURN
LOCK
U. S MOVIES
OFF
VIEW NR PROGRAMS?
G
PG
PG-13
R
NC-17
X
YES
PRESS ACTION TO RETURN
PG-13, R, NC-17 and X will be blocked.
U.S. MOVIES RATINGS CHART
NR
G
PG
PG-13
R
NC-17
X
44
CONTAINS NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie
has not been rated or rating does not apply.
GENERAL AUDIENCES. All ages admitted.
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
ADULTS ONLY.
LOCK Feature
Canadian English
The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two
rating systems used in Canada. PIP will also be blocked automatically.
Press to select CANADIAN ENGLISH.
CH
CTIO
Press to select CANADIAN ENGLISH ON or OFF.
N
A
1
VOL
ON
VOL
OFF
CH
LOCK
CANADIAN ENGLISH
OFF
VIEW E PROGRAMS?
C
C8+
G
PG
14+
18+
YES
PRESS ACTION TO RETURN
Press to select VIEW E PROGRAMS?
CH
CTIO
Press to select VIEW E PROGRAMS? YES or NO.
N
A
2
VOL
VOL
CH
YES
NO
Note:
E (Exempt) programming includes: news, sports,
documentaries and other information programming, talk
shows, music videos, and variety programming.
LOCK
CANADIAN ENGLISH
OFF
VIEW E PROGRAMS?
C
C8+
G
PG
14+
18+
YES
PRESS ACTION TO RETURN
Press to move between different ratings.
CH
CTIO
N
A
3
VOL
VOL
CH
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Note: See the CANADIAN ENGLISH RATING CHART.
LOCK
CANADIAN ENGLISH
OFF
VIEW E PROGRAMS?
C
C8+
G
PG
14+
18+
YES
PRESS ACTION TO RETURN
CANADIAN ENGLISH RATINGS CHART
E
Exempt - Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
C
Programming intended for children under age 8. No offensive language, nudity or sexual
content.
C8+
G
Programming generally considered acceptable for children 8 years and over. No profanity,
nudity or sexual content.
General programming, suitable for all audiences.
PG
Parental Guidance suggested. Some material may not be suitable for children.
14+
Programming contains themes or content which may not be suitable for viewers under the age
of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens
and early teens.
18+
ADULTS ONLY
45
LOCK Feature
Canadian French
The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings
categories. PIP will also be blocked automatically.
Press to select CANADIAN FRENCH.
CH
CTIO
Press to select CANADIAN FRENCH ON or OFF.
N
A
1
VOL
VOL
ON
OFF
CH
LOCK
CANADIAN FRENCH
OFF
VIEW E PROGRAMS?
YES
G
8 ANS+
13 ANS+
16 ANS+
18 ANS+
PRESS ACTION TO RETURN
Press to select VIEW E PROGRAMS?
CH
CTIO
Press to select VIEW E PROGRAMS? YES or NO.
N
A
2
VOL
VOL
YES
NO
Note:
E (Exempt) programming includes: news, sports,
documentaries and other information programming,
talk shows, music videos, and variety programming.
CH
3
LOCK
CANADIAN FRENCH
OFF
VIEW E PROGRAMS?
YES
G
8 ANS+
13 ANS+
16 ANS+
18 ANS+
PRESS ACTION TO RETURN
CH
CTIO
N
A
Press to move between different ratings.
VOL
VOL
CH
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Note: See the CANADIAN FRENCH RATINGS CHART.
LOCK
CANADIAN FRENCH
OFF
VIEW E PROGRAMS?
YES
G
8 ANS+
13 ANS+
16 ANS+
18 ANS+
PRESS ACTION TO RETURN
13ANS+, 16ANS+ and 18ANS+ will
be blocked.
CANADIAN FRENCH RATINGS CHART
46
E
Exempt - Exempt programming.
G
General - Programming intended for audience of all ages. Contains no violence, or the
violence content is minimal or is depicted appropriately.
8 ANS+
8+ General - Not recommended for young children. Programming intended for a broad
audience but contains light or occasional violence. Adult supervision recommended.
13ANS+
Programming may not be suitable for children under the age of 13 - Contains either a few
violent scenes or one or more sufficiently violent scenes to affect them. Adult supervision
strongly suggested.
16ANS+
Programming may not be suitable for children under the age of 16 - Contains frequent scenes
of violence or intense violence.
18ANS+
18 ans +Programming restricted to adults. Contains constant violence or scenes of extreme
violence.
LOCK Feature
Blocking Message
If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio
will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all
locks and rating blocks are disabled until the TV is turned off or until all settings are off.
Note:
If you enter your four-digit secret code to override rating blocks, you must reset
all rating blocks by either reprogramming or turning the TV off.
PROGRAM RATING EXCEEDED
ACCESS CODE
Split Screen Blocking Message
Split Screen function is available when V-Chip is activated. If the program being viewed in Split Screen exceeds the set
rating limit, Split Screen will disappear and a blocking message will be displayed.
Note:
Enable Split Screen functions by setting Lock Set, U.S. TV PROGRAM, U.S.
MOVIES, CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.
PROGRAM
RATING
EXCEEDED
ACCESS
CODE
PIP Blocking Message
PIP function is available when V-Chip is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will
disappear and a blocking message will be displayed.
Note:
Enable PIP functions by setting Lock Set, U.S. TV PROGRAM, U.S. MOVIES,
CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.
PIP RATING
EXCEEDED
HOW LONG?
After setting the LOCK SET and V-CHIP SET, set the blocking hours.
CH
CTIO
N
A
Press to select HOW LONG?
VOL
VOL
CH
Press to select 12HOURS/24HOURS/48HOURS /
ALWAYS.
12HOURS
24HOURS
ALWAYS
48HOURS
LOCK
LOCK SET
V-CHIP SET
HOW LONG?
CODE
OFF
BLOCK PROGRAMS :
U.S. MOVIES
SESTTING:
12HOURS
CHANGE CODE
PRESS ACTION FOR MAIN MENU
47
Picture in Picture Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
Basic PIP Operation
PIP
1
Press the PIP button on the remote control to display the PIP
Frame on screen.
Note:
Audio is from Main Picture
only.
SAP
POWER
TV/VIDEO
LIG
H
E
UT
T
M
T
ASPEC
DVD
AUX
DTV
CBL
RC
R
VR
VC
TV
DB
VOL
PIP CH
VCR CH
.
RECALL
PAGE
GUIDE
1
2
3
4
5
6
7
8
R-TUNE
Press to select channel for the Main Picture.
or
Use the remote control numeric keypad.
3
CH
CH
CTIO
N
EXIT
Select channels for the PIP frame by pressing
VOL
A
PC
MENU
PIP CH
VCR CH
2
N
A
S
CH
CTIO
VOL
VOL
CH
Main Picture
1
2
3
9
4
5
6
PROG
7
8
9
0
0
Picture-in-Picture Frame
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
SPLIT
MOVE
SEARCH
OPEN/CLOSE
4
RECALL
5
PIP
Press to view picture source status.
Press
PIP
again to cancel the PIP Frame.
SWAP
SWAP
SWAP
Press
SWAP
to switch the PIP and MAIN PICTURE source.
A
48
A
B
B
B
A
Picture in Picture Operation
PIP MIN, PIP MAX
PIP MIN
REW
PIP MAX
FF
These features are used to size PIP Frame.
Press
PIP MIN
REW
or
PIP MAX
FF
MAX
to size the PIP Frame.
Minimum
FREEZE
TV/VCR
Freeze
Main Picture
During PIP operation this feature is used to stop action in PIP frame.
1
Press
2
Press
FREEZE
TV/VCR
FREEZE
TV/VCR
to stop PIP frame action.
again to continue action.
Note:
To stop action for Main picture:
1 In PICTURE MENU OTHER ADJ, select FREEZE
PIP or SPLIT (see page 32).
2 Press
FREEZE
TV/VCR
while PIP frame is not displayed.
TV/VIDEO Button
FREEZE
Main Picture
TV/VIDEO
Press when PIP frame is displayed to select desired input mode.
CH #
PIP COMPONENT 1
PIP VIDEO 3
Main Picture
PIP COMPONENT 2
PIP VIDEO 2
PIP HDMI
PIP VIDEO 1
Picture-in-Picture Frame
Search
SEARCH
OPEN/CLOSE
CH10 CH11
This feature lets you scan through all available channels.
CH12
1
2
Press
Press
SEARCH
OPEN/CLOSE
SEARCH
OPEN/CLOSE
Search Frames
to display search frames.
CH13
again to stop search feature. This returns
the screen to the previous condition (single screen, PIP
Main Picture
screen or SPLIT screen).
Move
MOVE
This feature is used to move PIP frame to one of four corners.
Press
MOVE
to position PIP frame to desired corner.
PIP Frames
Main Picture
49
Split Screen
This feature lets you watch two different channels side by side with or without an external video source.
The audio is from the Main picture only (left side).
Split screen enables you to search other channels on the right screen or check video recording status.
Splitting the screen
1
SAP
POWER
TV/VIDEO
to display Split screen.
LIG
H
E
UT
T
M
T
ASPEC
SPLIT
Press
DVD
AUX
DTV
CBL
RC
R
VC
VR
Main Picture
Split Screen
TV
DB
N
A
S
CH
CTIO
VOL
PC
MENU
EXIT
(The previously selected screen appears.)
VOL
2
CH
RECALL
PAGE
Press
SPLIT
again to return.
GUIDE
1
2
3
4
5
6
7
8
9
R-TUNE
Returning to one screen.
Freezing pictures
During Split Screen this feature is used to stop action in SPLIT screen.
PROG
0
1
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
Main Picture
SPLIT
MOVE
FREEZE
TV/VCR
Press
FREEZE
TV/VCR
to stop action in SPLIT screen.
FREEZE
SEARCH
OPEN/CLOSE
SWAP
2
Press
FREEZE
TV/VCR
again to recover.
Note:
To stop action for Main picture:
1 In PICTURE MENU OTHER ADJ, select FREEZE
PIP or SPLIT (see page 32).
2 Press
FREEZE
TV/VCR
while SPLIT frame is not displayed.
Notes:
(1) Sound from the left screen is output from the speakers on the TV set (and headphone jack).
(2) When the screen is split, signals of the left screen are output from the rear monitor output terminal.
(3) The left and right screens are processed by individual circuits, and therefore, may have slight variation in image quality.
(4) Split screen returns to single screen when the TV is turned off.
(5) The right and left screens cannot display the same picture at the same time.
50
Split Screen
Changing the channels for the Split Screen
PIP CH
VCR CH
Select channels for the Split Screen by
PIP CH
VCR CH
pressing
CH
SWAP
Press
SWAP
to switch the SPLIT SCREEN and
MAIN PICTURE source.
.
CH10
CH5
CH10
CH5
CH10
CH6
CH5
CH10
Changing the channels for the Main Picture
CH
Swapping left and right screens
1
2
3
4
5
6
7
8
9
Viewing Videos
TV/VIDEO
While Split screen is displayed, press
switch modes.
TV/VIDEO
to
0
Select channels for the Main Picture by pressing CH
CH10
CH
VIDEO 1
or use the remote control numeric keypad.
CH10
CH6
Searching the other channels
SEARCH
OPEN/CLOSE
CH5
press
CH6
SEARCH
OPEN/CLOSE
to search the other channels.
CH10 CH11
CH12
CH13
Search Frames
Press
SEARCH
OPEN/CLOSE
again to stop the search.
This returns the screen to its previous condition.
51
ASPECT Controls
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT
ASPECT button
The aspect mode changes each time the ASPECT button is pressed.
JUST
4:3
ZOOM
FULL
SAP
POWER
TV/VIDEO
Note: Aspect MODE will change as follows depending on the receiving signals.
LIG
H
T
M
T
ASPEC
E
UT
DVD
AUX
DTV
CBL
JUST
R
4:3
ZOOM
FULL
ZOOM
FULL
ZOOM
FULL
(1) 480i:
RC
VR
VC
4:3
S
*(JUST)
CH
CTIO
VOL
PC
MENU
(2) 480p (including HDMI-IN):
NORMAL
(3) PC mode
N
A
TV
DB
*No signal
VOL
(4) 1080i:
FULL only
(5) SPLIT SCREEN:
FULL only
CH
RECALL
Mode
Picture
Explanation
4
4 : 3 will display a 4:3 picture in its true aspect ratio.
Bars can be seen to the left and right of the image.
4:3
4:3
3
4
NORMAL
NORMAL
NORMAL will display a 4:3 picture in its true aspect
ratio.
Bars can be seen to the left and right of the image.
3
4
16
ZOOM
ZOOM
3
4
9
ZOOM mode magnifies the central section of the
picture.
9
FULL will display the picture at its maximum size but
with slight elongation.
9
JUST mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the sides
of the screen so that elongation is only apparent at
the left and right edges of the screen. The size of the
picture will depend on the original signal.
16
FULL
FULL
3
4
16
JUST
JUST
3
Note:
The S VIDEO terminal on this set can be detected specially encoded signals that are compatible with a wide screen
monitor. When a full image from the S VIDEO terminal of specially encoded video is detected by the set, the screen size
is automatically set to FULL mode.
52
PC MENU
1
PC
MENU
Press to display the PC menu.
CH
CTIO
N
A
2
VOL
Press to display the PC menu screen,
VOL
CH
Press to select PICTURE/PICTURE POS./SIZE/SIGNAL
To PICTURE adjust menu
(see page 54)
SAP
POWER
LIG
H
NORMALIZE NORMAL
PICTURE MENU
PICTURE
BRIGHTNESS
SHARPNESS
COLOR TEMP
T
DVD
AUX
DTV
CBL
RC
R
VR
VC
DB
CH
CTIO
VOL
PC
MENU
EXIT
To PICTURE POS./SIZE
adjust menu
(see page 55)
VOL
PC MENU
CH
RECALL
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
R-TUNE
STANDARD
25
0
3
NORMAL
S
N
A
TV
M
PICTURE
TV/VIDEO
T
ASPEC
E
UT
PROG
0
PICTURE
PICTURE POS./SIZE
SIGNAL
PICTURE POS./SIZE
NORMALIZE NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
To SIGNAL screen
(see page 56)
SIGNAL
PIP MIN
REW
PLAY
PAUSE
STOP
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
SPLIT
MOVE
PIP MAX
FF
REC
H&V
SYNC
H-FREQ.
V-FREQ.
31.5 kHz
60.0 Hz
SEARCH
OPEN/CLOSE
SWAP
53
PC MENU
PICTURE Adjustments
1
2
Select PICTURE from “PC MENU” during PC input signal.
PICTURE
NORMALIZE NORMAL
PICTURE MENU
PICTURE
BRIGHTNESS
SHARPNESS
COLOR TEMP
Select to adjust each item.
STANDARD
25
0
3
NORMAL
CH
CTIO
N
A
Press to select the menu to adjust.
VOL
VOL
Select the desired level by looking at the picture
behind the menu.
CH
Press the left
modes.
PICTURE
NORMALIZE NORMAL
PICTURE MENU
PICTURE
BRIGHTNESS
SHARPNESS
COLOR TEMP
STANDARD
25
0
0
NORMAL
or right
AUTO
CINEMA
button to switch between
STANDARD
DYNAMIC
AUTO
Automatically selects the mode that best suits the
brightness of the environment.
STANDARD
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of BRIGHTNESS
and PICTURE.
DYNAMIC
For viewing in brighter environments.
This menu selects higher than normal levels of
BRIGHTNESS and PICTURE.
CINEMA
Ideal for movies.
Note:
If you would like to change the picture and color of the
selected PICTURE menu to something else, adjust using
the items in the PICTURE menu. (see next page)
Press the left
modes.
or right
NORMAL
Helpful Hint (
NORMALIZE
button to switch between
COOL
WARM
Normalization)
While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
54
PC MENU
Adjusting PICTURE POSITION/SIZE
Adjusting screen
1
Select PICTURE POS./SIZE from the “PC MENU” during PC
input signal.
Press to select H-POS/H-SIZE/V-POS/
V-SIZE/CLOCK PHASE.
CH
CTIO
N
A
2
VOL
VOL
CH
During “RGB” input signal.
PICTURE POS./SIZE
NORMALIZE NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
3
CH
CTIO
N
A
Press to adjust POS./SIZE.
VOL
VOL
CH
Note:
If a “Cue” or “Rew” signal from a VCR or DVD
player is received, the picture position will shift
up or down. This picture position movement
cannot be controlled by the PICTURE POS./
SIZE function.
When the Position Left “ ” button is pressed
When the Position Right “ ” button is pressed
When the Position Left “ ” button is pressed
When the Position Right “ ” button is pressed
When the Position Left “ ” button is pressed
When the Position Right “ ” button is pressed
When the Position Left “ ” button is pressed
When the Position Right “ ” button is pressed
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
Flickering and distortion can be eliminated by using the Position Left “ ” or Right “ ” button to
(RGB/PC in Mode) carry out adjustment.
Helpful Hint (
NORMALIZE
Normalization)
While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
55
PC MENU
SYNC
Select SIGNAL from the “PC MENU” menu during PC input signal.
PC MENU
PICTURE
PICTURE POS./SIZE
SIGNAL
CH
CTIO
N
A
Press to select each item.
VOL
VOL
Press
CH
(ACTION) button
SIGNAL
H&V
SYNC
H-FREQ.
V-FREQ.
31.5 kHz
60.0 Hz
Note:
Sync cannot be adjusted while a DVI signal is being applied.
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
H & V:
ON G:
The H and V sync signals are input from the HD/VD connector.
Uses a synchronized signal on the Video G signal, which is input
from the G connector.
SYNC
H&V
SYNC
ON G
H-FREQ. (kHz)/V-FREQ. (Hz)
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical
48 - 120 Hz
56
H-FREQ.
V-FREQ.
31.5 kHz
60.0 Hz
JPEG Viewer (SD Card/PC Card)
Still image data (JPEG) made with a digital camera, digital video camera, or PC can be played back using an SD
Card/PC Card.
Displayable Image Formats:
Baseline JPEG
(80 x 60 ~ 5120 x 3840 pixels)
Notes:
• Some parts of an image may not be displayed or the image may be displayed on a smaller scale depending on the
size of the image.
• Only JPEG images can be displayed on this Television.
Card Data Protection
• Do not remove the card while it is being accessed.
• Do not touch the terminals on the back of the SD Card/PC Card.
• Electrical interference, electrostatic discharges and malfunctions of the unit or card may all result in damage to the
card or data loss. It is recommended that any important data also be backed up on a PC.
• Stored data should be periodically backed up as a protection against data corruption, data loss or device malfunction.
Please note that our company shall not accept any liability for damage or loss of stored data.
Caution
• Always insert card in the correct direction. Failure to do so may result in damage to the card and this unit.
• The SD Card and PC Card are precision devices. Do not subject them to excessive pressure or strong impacts.
Folders and Files
Digital cameras that are compliant with DCF specifications use folders with a specific structure. The following diagram
shows an example of the folder structure.
Example:
If the Card file hierarchy is displayed on the PC
as shown in diagram at below.
ROOT
DCIM
100_PANA
P1000001.jpg
P1000002.jpg
P1000003.jpg
P1000004.jpg
101_PANA
P1010001.jpg
P1010002.jpg
P1010003.jpg
P1010004.jpg
DCIM Folder
The digital camera creates this folder automatically.
100_PANA Folder
Folder names consist of a 3-digit folder number which is
followed by five arbitrary characters. Digital camera
images are stored within these folders.
JPEG files in the 100_PANA folder are displayed when a
Card, which is structured as shown left, is inserted. To
display another folder, see page 69 INDEX AREA
OPERATION.
Note:
The folder name may vary according to the digital camera
being used.
P1000001.JPG: DCF File
File names consist of four arbitrary characters followed by
a 4-digit file number. DCF files are image files
(normally JPEG files) that have been taken by a digital
camera.
57
JPEG Viewer (SD Card/PC Card)
Compatible Card
SD Card slot
Insert the Card.
Front Card Slot
Insertion
SD Card
Multi Media Card
Removal
RD
PC CAT
EJEC
RD
PC CAT
EJEC
PC
RD
SD CA-EJECT
PUSH
PC
RD
SD CA-EJECT
PUSH
2. Lower.
1. Raise.
1. Push the center
of the card.
2. Insert it
to the depth.
Direct the
label side upward.
Remove the Card.
Insertion
Removal
Holding
both edges,
securely insert it to
the depth.
RD
PC CAT
EJEC
PC
1. Push.
2. The removal
button pops
out.
Align the
direction
of mark.
RD
PC CAT
EJEC
RD
SD CA-EJECT
PUSH
Terminal
face to
the depth
Direct the
label side upward.
3. Push.
PC
If the removal button does not pop
out and PC card can not be removed,
Push in PC card again, and proceed
with 1 to 3 for the removal button.
If PC card adapter is used, remove it
together with the adapter.
PC Card slot
Compact Flash*
Smart Media*
Memory Stick*
xD Picture Card*
• The media* listed in the right column above can be read via
the PC Card in the PC Card adaptor.
• Hard disk PC Cards, Flash ATA Cards, and other recorded
media cannot be used.
• Place the selected media onto the PC Card and then insert
into the PC Card Slot.
• When both an SD Card and PC Card are inserted, the SD
Card contents has priority and will be displayed.
• If the Card is unusable, “CARD FORMAT NOT
SUPPORTED” is displayed on-screen. Remove the Card
only when ACCESS is not displayed.
• If an incompatible JPEG file is displayed (full size file
preview), “DATA FORMAT NOT SUPPORTED” is displayed.
Notes:
• Insert/remove Card while “Card Menu Screen” or “No Card”
is displayed.
• Be sure ACCESS is not displayed before Card insertion/
removal.
• Fully insert the Card (ACCESS is displayed). Wait until
ACCESS goes out before removing.
• Before reinserting a Card after removing it, wait until “NO
CARD” is displayed. If there are Cards in both Card Slots,
wait until the Card Menu Screen of the other Slot is
displayed and ACCESS is no longer displayed before
reinserting a Card.
Card Menu Screen
The screen below is displayed automatically when a card is inserted. If “NO CARD” appears, confirm that a card
is correctly inserted.
Parent Folder
Returns currently
displayed folder to
the parent (previous)
folder.
Menu Area
Select display method
(SINGLE PLAY or
SLIDE SHOW).
Confirm the displayed
card type (SD Card or
PC Card).
-MENUSINGLE
SLIDE
PAGE:
Display Page No.
When the displayed files/
folders fill more than one page,
the total number of pages is
displayed.
1/6
SD/PC
CT I O
A N
JPEG
ACCESS
ACCESS Indication
ACCESS is displayed
while data is read.
58
Subfolder
The subfolder of
the currently
displayed folder is
opened.
200_PANA
Folder Name Area
The name of the selected
subfolder (framed in
yellow) is displayed.
Index Area
Folders and files are
displayed here.
Notes:
• Up to 1 000 JPEG files can be
displayed. (This number may
be lower if subfolders, or files
other than JPEG are included
in the folder.)
• Depending on JPEG file type,
“JPEG” will be displayed
instead of thumbnail image.
Note:
Only JPEG files can be displayed.
JPEG Viewer (SD Card/PC Card)
MENU Area Operation
SAP
A
TV/VIDEO
VOL
LIG
H
1/6
VOL
Press to move
to index area.
CT I O
A N
T
M
T
ASPEC
E
UT
PAGE:
SD/PC
CH
CTIO
N
POWER
-MENUSINGLE
SLIDE
DVD
AUX
DTV
CBL
CH
RC
VR
CR
V
VOL
PC
MENU
EXIT
S
CH
CTIO
N
A
TV
DB
VOL
CH
RECALL
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
R-TUNE
Press to select MENU.
SINGLE
A single image selected from the index area fills the screen.
You can also rotate the image and view image information. (PP. 60-61)
SLIDE
Images are displayed one after another as a slide show. Also, the SPEED
and Transition features (p. 61) can be used.
SD/PC
When both an SD Card and PC Card are inserted, the
used to select a card in the index area.
Index Area Operation
PROG
A
CH
CTIO
VOL
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
SPLIT
MOVE
SEARCH
OPEN/CLOSE
SWAP
Press to select
icon.
-MENUSINGLE
SLIDE
PAGE:
1/6
SD/PC
N
0
PIP MIN
REW
buttons can be
VOL
CT I O
A N
Press to set
CH
To select a page directly, enter the page number with the Number Keys,
then press ACTION.
Select an Image file.
Display full size file preview.
Select a Subfolder (
).
Display files/folders contained in the folder.
Select a Parent folder (
).
Make changes to the parent (previous) directory display.
Press to display again the
still pictures in SD/PC Card.
Notes:
File and folder names will not be displayed correctly if...
• More than 8 characters are used.
• Spaces and special symbols are used. Use care when changing file
and/or folder names.
RETURN Operation
RECALL
Press RECALL to display
RETURN MENU.
Press
to select an
item, and press ACTION.
-MENUSINGLE
SLIDE
PAGE:
1/6
SD/PC
RETURN
CTI O
A
N
RETURN TO MENU
RETURN:
Returns to the parent (previous) folder.
RETURN TO MENU:
Returns to Menu Area screen.
59
JPEG Viewer (SD Card/PC Card)
Single Play Mode
1
SAP
POWER
TV/VIDEO
LIG
H
DVD
AUX
DTV
CBL
RC
CR
VR
DB
TV
V
T
M
T
ASPEC
E
UT
N
A
S
CH
CTIO
VOL
PC
MENU
EXIT
VOL
CH
-MENUSINGLE
SLIDE
PAGE:
1/6
SD/PC
CTI O
N
A
RECALL
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
R-TUNE
PROG
0
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
Press
to select
“SINGLE,” and press
ACTION.
Press
to move
cursor to desired file in
INDEX AREA.
(Press
to display
next/previous page of 9
thumbnail files),
Press ACTION to display
file in full screen size.
SPLIT
MOVE
SINGLE VIEW SCREEN
Press
Press
Press
: The next image is displayed.
: The previous image is displayed.
: Each press rotates image 90˚.
Press
Press
SEARCH
OPEN/CLOSE
SWAP
Press
Press
Press
Press
Press
Press
Press
Continued in left column of next page.
60
JPEG Viewer (SD Card/PC Card)
Continued from page 60.
Slide Show Mode
Information Screen Display
1
Press ACTION: INFORMATION SCREEN is displayed.
(Rotation angle is maintained.)
Information Screen
FILE
DATE
P2000006
07/31/2003
-MENUPAGE:
START
SINGLE
SPEED
:FAST
SLIDE
TRANSITION:NORMAL
SD/PC
CT I O
N
A
Picture Adjustment
When ACTION is pressed while the Information
Screen is displayed, the Picture Adjust menu
(Page 30 and 31) is displayed. (Rotation angle is
maintained.)
Picture Adjust menu
PICTURE
PIC MODE
VIVID
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
SET
NORMAL
COLOR TEMP
NORMAL
PRESS RECALL TO EXIT
Pressing RECALL returns to SINGLE VIEW
SCREEN.
1/6
CTI O
A
N
Pressing RECALL returns to SINGLE VIEW
SCREEN.
Note:
• If a file name exceeds 8 characters, a file name
different from the original is displayed.
Press
to select “SLIDE,” and press
ACTION.
Press
to move cursor to desired file in
Index Area.
(Press
to display next/previous page of
9 thumbnail files),
Press ACTION to display SLIDE MENU.
Press
to select an item, and press
ACTION repeatedly to set.
[START]
Starts slide show.
[SPEED]
FAST:
Image transition every
2 seconds.
MEDIUM:
Image transition every
5 seconds.
SLOW:
Image transition every
10 seconds.
Note:
The display intervals of
2, 5, and 10 seconds do
not include file data
reading time. The display
interval becomes longer
depending on the JPEG
size.
[Transition]
NORMAL:
Image transition one by one.
WIPE:
Image transition from top to bottom.
SPLIT:
Image transition from center to edge.
BLIND:
Image transition in a series of band-like shapes
that resemble window blinds.
2
START SLIDE SHOW.
...
2
Press RECALL with SINGLE VIEW screen
displayed to return to the Index Area menu.
Press ACTION to stop or resume slide show.
3
Press RECALL to exit this mode.
61
Operating peripheral equipment using the remote control
Programming The Illuminated Remote Control Using Access Codes
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
1
Confirm that the external component is plugged in and operating.
2
Turn the component off.
A
POWER
+
CH
CTIO
Press POWER and ACTION together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and ACTION keys.
N
3
VOL
VOL
CH
4
DVD
AUX
DTV
CBL
R
DB
S
TV
5
RC
VR
VC
1
2
3
4
5
6
7
8
9
Press the mode key.
The mode key will illuminate steadily, all others will go out.
Enter the 3-digit component code using the Remote Control numeric keypad.
0
6
POWER
Press the Remote Control
POWER
to test the component. If the procedure is successful,
the component will turn on.
Default Modes For Remote Control
Device
Operates
TV
TV (Panasonic Only)
DTV
DTV (Panasonic Only)
CABLE
CABLE (Preset)
DBS
DBS (Preset)
VCR
VCR (Preset)
DVD/CD
DVD and CD (Preset)
Personal Video Recorders,
AUX
Tape and VCR2
RCVR
Audio Receiver (Preset)
Default
Panasonic TV Codes
Panasonic DTV Codes
Panasonic CABLE Codes
Panasonic DBS Codes
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal Video
Recorders Code
Panasonic RCVR Code
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat the
procedure using another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30
seconds,the programming will fail.
62
Operating peripheral equipment using the remote control
Programming Without A Code (When the code is not known)
This procedure searches all codes and is called the “sequence method.”
1
Confirm that the external component is plugged in and on.
2
Turn the component off.
SAP
POWER
TV/VIDEO
LIG
H
AUX
DTV
CBL
RC
3
A
VR
A
CH
VOL
CH
RECALL
4
DVD
AUX
DTV
CBL
R
VC
2
3
4
5
6
7
8
9
R-TUNE
DB
S
5
PROG
A
N
CH
CTIO
VOL
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
MOVE
VOL
CH
6
POWER
SWAP
Press the Remote Control
POWER
to test the component. If the procedure was
successful, the component will turn on.
Note:
Repeat the above steps until the component code is found. It may take many
attempts before the correct code is found.
CH
CTIO
After the code is found, press ACTION to store the code.
N
7
A
SPLIT
SEARCH
OPEN/CLOSE
Press the mode key.
The mode key will illuminate steadily, all others will go
out.
Press to move forward to the next code, or to move
backward.
0
PIP MIN
REW
RC
VR
GUIDE
TV
PAGE
1
PIP
Press POWER and ACTION together, for at least 5
seconds.
After 5 seconds, all the illuminated mode keys will
begin to flash.
Release the POWER and ACTION key.
VOL
N
EXIT
VOL
CH
CTIO
VOL
PC
MENU
+
POWER
DB
S
CH
CTIO
N
DVD
R
TV
VC
T
M
T
ASPEC
E
UT
VOL
VOL
CH
Note:
The step and set mode will start from the current device (not the beginning of the
list, except for the first time).
63
Operating peripheral equipment using the remote control
Infrared Codes Index
The remote control is capable of operating many brands of peripheral equipment. Refer to pages 50 and 51 for programming procedures.
Note: The remote control memory is limited and therefore some models may not operate. The remote control is not
designed to control all features available in all models.
Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control. Refer to
pages 22 and 57 - 58 for details on operating peripheral equipment using the remote control.
Infrared Remote Codes for Specific Components
Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a
handy reference whenever you need to reprogram your remote control.
CABLE
VCR
CD
Cable Box
Video Cassette Recorder
Compact Disc Player
DBS
RCVR
LD
Digital Broadcast System
Receiver or Amplifier
Laser Disc Player
Other Component
Other Component
Other Component
Other Component
Other Component
Other Component
Codes for VCR
R
VC
64
Brand
Admiral
Aiwa
Akai
Audio Dynamic
Bell &Howell
Broksonic
Canon
CCE
Citizen
Craig
Curtis Mathes
Daewoo
DBX
Dimensia
Emerson
Fisher
Funai
GE
Goldstar
Gradiente
Hitachi
Instant Replay
Jensen
JVC
Kenwood
LXI
Magnavox
Marantz
Marta
Memorex
MGA
Minolta
Mitsubishi
Multitech
NEC
Olympic
Code
335
332
314, 315, 316, 329
311, 339
305, 313
320, 326
323, 325
343
306
305, 306, 329
324, 345
301, 324, 343
310, 311, 339
345
303, 319, 320, 325, 326, 343
305, 307, 308, 309, 313
320, 326, 334
324, 333, 345
306
334
300, 323, 345
323, 324
339
310, 311, 334, 339
306, 310, 311, 339
300, 305, 306, 307, 308, 309
323, 324, 331
310, 311, 339
306
309, 324
338, 340, 341, 347, 348
300, 345
338, 340, 341, 347, 348
304, 347
310, 311, 334, 339
323, 324
Brand
Optimus
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pioneer
Proscan
Quasar
Radio Shack
RCA
Realistic
Samsung
Sansui
Sanyo
Scott
Sears
Sharp
Shintom
Signature 2000
Singer
Sony
Sylvania
Tashiro
Tatung
Teac
Technics
Teknika
Toshiba
Vector Research
Wards
Yamaha
Zenith
Code
306, 321, 328, 335
320, 326
321, 322, 323, 324
300, 305, 310, 311, 324, 339, 345
300, 311, 345
320, 323, 324, 326, 331, 343
323, 324, 331
323
300, 301, 302, 323, 324, 331,
333, 345, 346
321, 322, 323, 324
305, 309, 324, 333, 336, 340
300, 301, 302, 323, 324, 331,
333, 345, 346
305, 309, 324, 336, 340
302, 304, 333
320, 326, 339, 352
305, 309, 313
301, 302, 304, 309, 320, 326,
338, 340, 347, 348
300, 305, 306, 307, 308
335, 336
317
335
317
328, 329, 330
323, 324, 331
306
310, 311, 339
310, 311, 339
321, 322, 323, 324
324
301, 346
311
306, 309, 335, 336, 344
305, 310, 311, 339
306, 344
Operating peripheral equipment using the remote control
Codes for DVD
DVD
Brand
Denon
Ferguson
JVC
Mitsubishi
Nordmende
Panasonic
Philips
Pioneer
RCA
Code
100
101
109
105
101
100
103
102
101
Brand
Saba
Samsung
Sharp
Sony
Technics
Thomson
Toshiba
Yamaha
Zenith
101
110
108
104
100
101
103
100
107
Code
Brand
Optimus
Panasonic
Philips
Pioneer
Quasar
RCA
Sansui
Sanyo
Scott
Sharp
Sherwood
Sony
Soundesign
Teac
Technics
Victor
Yamaha
Code
208, 218, 220, 222
224, 225, 227
229, 230
208
224, 225, 227
231, 237, 238, 247
210, 246
205
210, 246
242, 243
220
228
244
212, 216, 218
224, 225, 227
240, 241, 245
202, 203, 204
Brand
Philips
Pioneer
RCA
Sansui
Sharp
Sony
Teac
Technics
Yamaha
Code
222
204
226, 227, 228
205, 210
231
219, 220
210, 211, 215
216, 218
201, 202
Codes for CD
DVD
Brand
Admiral
Aiwa
Carver
Denon
Emerson
Fisher
Harman Kardon
Hitachi
Jensen
JVC
Kardon
Kenwood
LXI/Sears
Magnavox
Marantz
McIntosh
Nakamichi
Onkyo
Code
226
233, 235
229
242
239
205
219, 220, 221, 223
207
234
240, 241, 245
223
200, 201, 211, 245
236
229, 232
229
221
210
214, 215
Codes for Personal Video Recorders
AUX
Brand
Panasonic Replay TV 100
Philips Tivo
101
Sony Tivo
102
Code
Codes for Cassette Deck
AUX
Brand
Aiwa
Denon
Fisher
Jensen
JVC
Kenwood
Marantz
Nakamichi
Onkyo
Panasonic
Code
223, 224, 225
231
203
214
229, 230
200, 207
202
205
208, 209, 213
216, 218
65
Operating peripheral equipment using the remote control
Codes for Receivers
RC
VR
Brand
Admiral
Aiwa
Denon
Fisher
Garrard
Harman Kardon
Jensen
JVC
Kenwood
Magnavox
Marantz
Mclntosh
Nakamichi
Onkyo
Code
120
125, 126
134, 135, 136
104
113
115, 123
129
132, 133
100, 108
127
124
116
106
109, 114
Brand
Optimus
Panasonic
Philips
Pioneer
Quasar
RCA
Sansui
Sharp
Sony
Soundesign
Teac
Technics
Victor
Yamaha
Code
103, 127, 130, 131
118, 119, 121
123
105, 107
118, 119, 121
103, 105, 127, 130, 131
103, 111, 139
134, 137
122
138
111, 112, 113
118, 119, 121
132, 133
101, 102
Code
124
125, 132
105, 132
105, 122
112, 113
124, 125, 132
129
134
105, 132
122
111, 119, 120, 121, 122, 123,
124, 125, 126, 127
112, 118, 140, 141, 142, 145
103, 124
103, 104, 105
133
130
105, 132
102, 137, 139
109, 110, 114
106, 107, 128, 129, 130
101, 116
105, 132
Brand
Puser
RCA
Realistic
Regal
Regency
Rembrandt
Samsung
Scientific Atlanta
Slmark
Sprucer
Stargate
Tel eview
Texscan
Tocom
Toshiba
Unika
Universal
Videoway
Viewstar
Zenith
Zenith /Drae
Satellite
Code
132
115
132
112, 118, 140, 141, 142, 145
134
105, 132, 137
105
111, 112, 113
101, 105
105, 110
105, 132
101, 105
144
135
104
125, 132
122, 132
106
129, 130
100, 117
100
Code
105, 115, 116
Brand
Magnavox
Panasonic
Philips
Primestar
Proscan
RCA
Sony
Star Choice
Toshiba
Uniden
Code
101, 102
104
101, 102
108
106, 109, 110, 113
106, 109, 110, 113
107
103, 108
100
101, 102
Codes for Cable Box
CBL
Brand
ABC
Archer
Cableview
Citizen
Curtis
Diamond
Eagle
Eastern
GC Brand
Gemini
General
Instrument/Jerrold
Hamlin
Hitachi
Macom
Magnavox
Memorex
Movietime
Oak
Panasonic
Philips
Pioneer
Pulsar
Codes for DBS
DB
S
66
Brand
Dish Network
(Echostar)
Echo Star
Express VU
G.E.
G.I.
(General Instrument)
Gradiente
Hitachi
HNS (Hughes)
105
105, 115
106
108
114
103, 111, 112
103
Operating peripheral equipment using the remote control
Mode Operational Key Chart
This chart defines which keys that are operational after programming (if needed), while in the selected remote control
mode TV, DTV, CABLE, DBS, VCR, DVD ...etc.
KEY NAME
TV MODE
DTV MODE
CABLE MODE
DBS MODE
POWER
POWER
POWER
POWER
POWER
SAP ON/OFF
-
-
-
MUTE
TV MUTE
CBL MUTE
TV MUTE
TV ASPECT
DTV ASPECT
-
DBS ASPECT
TV INPUT SW
TV INPUT SW
TV INPUT SW
TV INPUT SW
REMOTE BUTTONS
REMOTE BUTTONS
REMOTE BUTTONS
REMOTE BUTTONS
CHANNEL UP/DOWN
NAVIGATION UP/DOWN
CABLE CHANNEL UP/DOWN
DBS NAVIGATION UP/DOWN
ACTION
ACTION
ENTER
DBS ACTION
VOL + / -
NAVIGATION RIGHT/LEFT
CABLE VOL + / -
DBS NAVIGATION RIGHT/LEFT
PC-INPUT
DTV MENU
-
DBS MENU
DISPLAY
PROGRAM INFO.
TV DISPLAY
DBS PROG.INFO
-
EXIT (EPG)ELECTRONIC
PROGRAM GUIDE
-
DBS EXIT
-
STB PAGE UP/DOWN
-
DBS PAGE UP/DOWN
-
GUIDE (EPG)ELECTRONIC
PROGRAM GUIDE
-
DBS GUIDE
Select Channel
Select Channel
Select Channel
Select Channel
PREVIOUS CHAN
OR VIDEO MODE
PREVIOUS STB CHAN
CABLE PREVIOUS
DBS PREVIOUS
-
DTV PROGRAM/DASH
-
DBS PROGRAM/DASH
PIP MINIMIZE/
MAXIMIZE
-
-
-
SD
-
-
-
-
-
-
-
-
-
-
-
-
Info (EPG) ELECTRONIC
PROGRAM GUIDE
VCR RECORD
DBS RECORD
PIP FREEZE
-
-
TV/DBS SWITCH
PIP or SPLIT
CHAN UP/DOWN
-
TV CHANNEL UP/DOWN
DBS CHANNEL UP/DOWN
PIP SEARCH
-
-
DBS SEARCH
PIP ON/OFF
-
-
DBS M-GUIDE
SPLIT ON/OFF
-
-
DBS FAV
MOVE PIP
-
-
DBS JUMP
PIP or SPLIT SWAP
-
-
-
SAP
MUTE
ASPECT
TV/VIDEO
CH
CTIO
N
A
LIGHT
VOL
VOL
CH
PC
MENU
RECALL
EXIT
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
0
R-TUNE
PROG
PIP MIN
REW
PIP MAX
FF
PLAY
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
PIP
SPLIT
MOVE
SWAP
67
Operating peripheral equipment using the remote control
DVD/CD MODE
(DVD)
(CD)
(PVR)
AUX MODE
(VCR2)
(TAPE)
POWER
POWER
POWER
POWER
POWER
-
-
-
-
-
-
TV MUTE
TV MUTE
RCVR MUTE
TV MUTE
TV MUTE
RCVR MUTE
RCVR MUTE
-
-
-
-
-
-
-
TV INPUT SW
TV INPUT SW
-
PVR TV/VCR
TV INPUT SW
TV INPUT SW
RCVR INPUT SW
KEY NAME
VCR MODE
POWER
POWER
POWER
-
RCVR MODE
SAP
MUTE
ASPECT
TV/VIDEO
LIGHT
CH
CTIO
N
A
REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS
VOL
VOL
CH
PC
MENU
RECALL
EXIT
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
REMOTE BUTTONS
REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS
TV CHAN
UP/DOWN
NAVIGATION
UP/DOWN
NEXT/PREVIOUS
TRACK
PVR
UP/DOWN
TV CHANNEL
UP/DOWN
-
TUNER +/-
TV ACTION
SELECT
-
PVR SELECT
TV ACTION
-
-
TV VOLUME +/-
NAVIGATION
UP/DOWN
RCVR VOLUME
UP/DOWN
PVR
RIGHT/LEFT
-
DVD MENU
-
PVR MENU
-
-
-
-
-
TV VOLUME +/- RCVR VOLUME +/- RCVR VOLUME +/-
ONSCREEN VCR
DISPLAY
DVD DISPLAY
TIME FORMAT
PVR ENTER
ONSCREEN VCR
DISPLAY
-
-
-
PVR EXIT
-
-
-
-
SKIP +/-
SKIP +/-
-
-
-
-
-
-
-
PVR REP. GUIDE
-
-
Select Channel
Select Chapter
Number
Select Track
Number
-
DVD TITLE
NEXT DISK
-
-
VCR REW/FF
Select Channel
Select Channel
-
0
R-TUNE
-
DECK A/B
-
-
PVR
RELAY ZONES
PVR
RETURN TO LIVE
-
-
-
SKIP SEARCH
<<REW/>>FF
SEARCH REW/FF
PVR REW/FF
VCR REW/FF
TAPE REW/FF
SURROUND -/+
PLAY
PLAY
PLAY
PLAY
PLAY
PLAY
-
PAUSE
STILL/PAUSE
PAUSE
PAUSE
PAUSE
PAUSE
-
STOP
STOP
STOP
STOP
STOP
STOP
-
VCR RECORD
DVD RECORD
-
PVR RECORD
VCR RECORD
TAPE RECORD
-
TV/VCR SWITCH
-
-
PROG
PIP MIN
REW
PIP MAX
FF
PLAY
1.... AV1
2.... AV2
3.... AV3
4.... AV4
5.... CD
6.... TUNER
7.... PHONO
8.... TAPE
9.... AUX
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
TV/VCR SWITCH
-
-
PVR
INSTANT RELAY
VCR CHANNEL
UP/DOWN
DVD CHANNEL
UP/DOWN
RANDOM/
REPEAT
PVR CHANNEL
UP/DOWN
VCR CHANNEL
UP/DOWN
-
RCVR CENTER
+/-
-
OPEN/CLOSE
OPEN/CLOSE
PVR
QUICK SKIP
-
OPEN/CLOSE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
PIP
SPLIT
MOVE
SWAP
68
Troubleshooting Chart
Before calling for service, determine the symptoms and follow suggested solutions.
Symptoms
Symptoms
VIDEO
VIDEO
Solutions
Solutions
AUDIO
AUDIO
Snowy Video
Noisy Audio
Adjust Antenna Location and Connection
Multiple Image
Noisy Audio
Adjust Antenna Location and Connection
Check Antenna Lead-in Wire
Interference
Noisy Audio
Move Television away from Electrical Appliances,
Lights, Vehicles and Medical Equipment
Normal Video
No Audio
Increase Volume
Check Mute
Check Television SPEAKERS on/off
Change Channel
No Video with
Snow
Noisy Audio
Set TV or Cable Mode Properly
Check Antenna Cables
No Video /
No PIP
No Audio
Check Power Cord is Plugged into Active Outlet
Adjust Brightness and Audio Controls
Change Channel
Check Cable Connections
Program the Remote Control Again
Check Second Video Source Operation
No Color
Normal Audio
Adjust Color Settings
Change Channel
Normal Video
Wrong Audio
Check Audio Is Set To Stereo or Mono, Not SAP
Black Box on
Screen
Normal Audio
Change CC (Closed Captioning) from Text Mode
Normal Video
Normal Audio
Replace Remote Control Batteries
Intermittent Remote Control Operation
Plasma Display panel
Symptoms
Some parts of the screen do not
light up.
Check
The plasma display panel is manufactured using an extremely high level of precision
technology, however, sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a malfunction.
Do not allow a still picture to be displayed for an extended period, as this can cause
a permanent after-image to remain on the Plasma TV.
Examples of still pictures include logos, video games, computer images, teletext
and images displayed in 4:3 mode.
After-images appear
Whirring sounds can be heard
from the display unit.
Note:
The permanent after-image on the Plasma TV resulting from fixed image use is not
an operating defect and as such is not covered by the Warranty.
This product is not designed to display fixed images for extended periods of time.
The display unit is fitted with a cooling fan to dissipate heat generated during normal
use. The whirring sound is caused by rotation of the fan and is not a malfunction.
69
VIDEO/COMPONENT/RGB/PC/HDMI input signals
COMPONENT VIDEO INPUT
1
INPUT
1
2
S VIDEO
2
Y
ANT 1
PROG OUT
SPLIT
OUT
PB
ANT 2
HPJ
VIDEO
PC
S-VIDEO VIDEO L AUDIO R
INPUT 3
VIDEO
PR
L
TO AUDIO
AMP
VIDEO input
R
L
PC RGB input
R
AUDIO IN
AV IN
VIDEO input
COMPONENT input
HDMI input
VIDEO input
signal name
1
NTSC
horizontal
frequency(kHz)
15.73
vertical
frequency(Hz)
59.94
horizontal
frequency(kHz)
15.73
31.47
33.75
31.47
31.47
35.00
37.50
31.50
37.88
46.88
53.67
49.73
48.36
56.48
60.02
68.68
68.68
63.98
79.98
91.15
75.00
vertical
frequency(Hz)
59.94
59.94
59.94
70.00
59.94
66.67
75.00
60.00
60.32
75.00
85.06
74.55
60.00
70.07
75.03
85.00
75.06
60.02
75.03
85.02
60.00
Applicable input signals (∗ mark)
signal name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
525 (480) /60i
525 (480) /60p
1,125 (1,080) /60i
640 × 400 @70
640 × 480 @60
Macintosh13” (640 × 480)
640 × 480 @75
852 × 480 @60
800 × 600 @60
800 × 600 @75
800 × 600 @85
Macintosh16” (832 × 624)
1,024 × 768 @60
1,024 × 768 @70
1,024 × 768 @75
1,024 × 768 @85
Macintosh21” (1,152 × 870)
1,280 × 1,024 @60
1,280 × 1,024 @75
1,280 × 1,024 @85
1,600 × 1,200 @60
Note: Signals without above specification may not be displayed properly.
70
COMPONENT
PC
HDMI
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
Specifications
TH-42PX20
TH-50PX20
Power Source
AC 120 V, 50/60 Hz
AC 120 V, 50/60 Hz
Power Consumption
Maximum : 595 W
Stand-by condition : 0.9 W
Maximum : 645 W
Stand-by condition : 0.9 W
Plasma Display panel
Drive method : AC type 42-inch ,
16 : 9 aspect ratio
Drive method : AC type 50-inch ,
16 : 9 aspect ratio
Screen Size
36.22 ” (920 mm) (W) × 20.39 ” (518 mm) (H) ×
41.57 ” (1056 mm) (diagonal)
43.54 ” (1106 mm) (W) × 24.49 ” (622 mm) (H) ×
49.96 ” (1269 mm) (diagonal)
Dimensions
(W×H×D)
44.88 ” (1140 mm) × 29.8 ” (757 mm) ×
5.47 ” (139 mm)
52.32 ” (1329mm) × 34.25 ” (870 mm) ×
5.47 ” (139 mm)
Mass (Weight)
90.4 lb. (41 kg) Net
121.3 lb. (55 kg) Net
Channel Capability-181
VHF-12 : UHF-56 : Cable-125
Woofer φ 80 mm × 2 , Tweeter 16 mm × 73 mm × 8
Speaker
Sound Audio Output 26 W [ 5 W + 5 W, 8 W + 8 W ] ( 10 % THD )
Headphone
M3 (3.5 mm) Jack × 1
FEATURES
Two screen display fuctions
BBE VIVA
CLOSED CAPTION
3D Y/C FILTER
LINEAR PIP
V-Chip
Accessories Supplied
Remote control Transmitter
AA Battery × 2
AC Cord
Pedestal
Clamper × 2
EUR7603ZB0
Ferrite cores : TH-42PX20 (large × 6, small × 5)
TH-50PX20 (large × 7, small × 5)
F type Antenna Adaptor (3C-2V × 2, 5C-2V × 2)
Operating Conditions
Temperature : 34 °F - 104 °F (0 ° – 40 °C)
Humidity : 20 % - 80 % (non-condensing)
Connection Terminals RGB input
AV INPUT 1- 3
HDMI
JPEG Viewer
D-SUB 15pin
R,G,B / 0.7 Vp-p (75 Ω)
HD, VD / 1.0 - 5.0 Vp-p (high impedance)
VIDEO
1.0 Vp-p (75 Ω)
(Phono Jack Type)
S-VIDEO
Y : 1.0 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
(Mini DIN 4-pin)
AUDIO L-R
0.5 Vrms
(Phono Jack Type × 2)
AV PROG. OUT
VIDEO
1.0 Vp-p (75 Ω)
(Phono Jack Type)
AUDIO L-R
0.5 Vrms
(Phono Jack Type × 2)
TO AUDIO AMP
AUDIO L-R
0.5 Vrms
(Phono Jack Type × 2)
COMPONENT VIDEO
INPUT1-2
Y
PB / PR
AUDIO L-R
1.0 Vp-p (including synchronization)
± 0.35 Vp-p
0.5 Vrms
(Phono Jack Type × 2)
HDMI
HDMI type A Connector
AUDIO L-R
0.5 Vrms
(Phono Jack Type × 2)
Note: Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
71
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this
serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent
record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
Serial Number
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Printed in Japan
MBS0803S1093