Sharp Aquos LC-65SE94U Operating instructions

SHARR
LC-46SE94U
LC-52SE94U
LC-65SE94U
LIQUID CRYSTAL TELEVISION
TEU~VISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LiQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACION
AQuas
LC-46SE94U1LC-52SE94U
LC-65SE94U
•
D(J IDOLBYI
Ijlli#Cf"''''j'
NOM 1245
c---.....l
~-JLL
~
NYCE
HIGH-DEFINITION TELEVISION
DIGITAL
HIGH-DEFINITION MULTIMEDIA INTERFACE
IMPORTANT : Please read this operation manual before starting operating the equipment.
IMPORTANTE : Lea este manual de operaci6n antes de comenzar a operar el equipo.
LC-46SE94U
LC-52SE94U
LC-65SE94U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly from
the actual operations.
• Menu items that are not selectable are grayed out.
• The examples used throughout this manual are based on the
LC-52SE94U model.
IMPORTANT:
To aid reporting in case of loss or theft, please record the
1V's model and serial numbers in the space provided. The
numbers are located at the rear of the TV.
Model No.:
Serial No.:
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
A.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION:
The lightning flash with arrow-head
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
(@- 1
IMPORTANT INFORMATION
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-46SE94U/LC-52SE94U/LC-65SE94U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
. following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radioflV technician for help.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical."
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of
mercury. Disposal of these materials may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local
authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling
organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP
(For U.S.A. only)
Trademarks
• Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
• "HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC."
• Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy
efficiency.
@-2
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
&
Additional Safety Information
15) Power Sources- This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16) Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry-Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts- When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check-Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting-When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
@-3
IMPORTANT SAFETY INSTRUCTIONS
• Outdoor Antenna Grounding - If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSIINFPA 70
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
;--'''-...:::::::,.L
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
.,..,,....c:=o-.GROUND CLAMPS
~ - POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may
scratch the panel surface.
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage
the panel surface.
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.
~S~.·\\
~~::r
• Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand - Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location - Select a place with no direct sunlight and good ventilation.
• Ventilation - The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 2,073,600 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that
this does not affect the performance of your product.
• Lightning - For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to
the equipment due to lightning and power-line surges.
• Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV
set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fire or shock hazard, do not expose this product to dripping
or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
Precautions when transporting the TV
• When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people
holding it with two hands - one hand on each side of the TV.
@- 4
Supplied Accessories
Make sure the following accessories are provided with the product.
LC-46SE94U/
LC-52SE94U
LC-46SE94U/
LC-52SE94U
o
o
Remote control
unit (x 1)
Page 8
AC cord (x 1)
Page 7
• Operation manual (x 1)
Cable clamp (x 1)
Cable tie (x 1)
Page 7
Stand hole cover
(x 2)
Page 45
Speaker unit
(x 1)
Pages 5 and 6
Stand unit
(x 1)
Page 6
• "AAA" size battery (x 2) Page 8
1m
• Always use the AC cord supplied with the TV.
• AC cord enclosed in this product is for 11 0-125V. In using it on the 125-240V AC, please consult the following.
SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP
6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.
QUICK REFERENCE
Attaching the Speaker Unit
• Before attaching (or detaching) the speaker unit, unplug the AC cord from the AC INPUT terminal.
• LC-65SE94U
1
Confirm that there are 4 screws and a screwdriver
supplied with the speaker unit.
2
Insert the projections on the speaker unit into the
corresponding slots on the TV, then fasten the screws.
3
Connect the ends of the cables to the speaker
terminals as shown below.
Connect the leads to the speaker terminals of the
same color.
screws>~
Screwdriver ~
Insert and tighten the 4 screws with the screwdriver
(supplied with the product) in the order of CD, e.g) ,
@and@.
1m
• To detach the speaker unit, perform the steps in reverse
order.
@)-
5
QUICK REFERENCE
• LC-46SE94U1LC-52SE94U
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1
Confirm that there are 4 screws and a screwdriver
supplied with the speaker unit.
,
2
,
"~
b
1-
3
Connect the ends of the cables to the speaker
terminals as shown below.
~~~~e~~I~~~ leads to the speaker terminals of the
Insert the projections on the speaker unit into the
corresponding slots on the TV, then fasten the screws.
Sc'owd",e,
T-Screws
0---'6''4''
2 -~ \:!I
"'..
:/'
BlaCki iRed
··I~I·
~~;~Red
Black~~~e~
mm
• To detach the speaker unit, perform the steps in reverse
order.
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Emm
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are 12 screws (all the same size)
supplied with the TV.
~~~~SSS~~~,GU~H;'~
"[ IT IT "["["[ IT "["["["["[
3 CD
®
2
Insert the stand into the openings on the
bottom of the TV.
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
- - - H e x key
mm
• To detach the stand, perform the steps in reverse order.
@-6
QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUaS television for stability.
• Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUaS television in a well ventilated area and make sure not to place it by a heat source or use it near
water. The AQUaS television is designed for AC use only and should be used with the supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
~ ~..
'. '.•" .
---=
,
'
\ \
I
I
f/~Cj~
QUICK INSTALLATION TIPS
1
Attach your antenna to the back of the AQUaS
television. (See page 12.)
2
Connect the AC plug for the AQUaS television into
the AC outlet.
.
:J.,~
~,t.'h:::r
n
,•. ""
I '
I"
II
4
How to turn on the AQUaS television for the first
time.
A) Press POWER on the AQUaS television.
POWER
-------""---------~-
11- i1-
t--ft;10WER
MENU
o
~
LC-46SE94U
LC-52SE94U
\
INPUT
o
LC-65SE94U
CP>" I
\1
AC outlet
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• This product must only be connected to a 120 V, 50 Hz,
grounded (3-prong) outlet.
Connecting it to any other kind of outlet will damage the
product and invalidate the warranty. (LC-55SE94U only)
B) The paWER indicator on the front of the
AQUaS television lights BLUE.
1m
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3
Place the Ferrite core in the space indicated in the
below figure and bundle the cords properly with
the cable clamp and the cable tie.
POWER indicator
1m
• TV angle cannot be adjusted.
Ferrite core
@- 7
QUICK REFERENCE
If the remote control fails to operate lV functions, replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert two "AAA" size batteries
(supplied with the product).
3 Close the battery cover.
• Place the batteries with their terminals
corresponding to the ( + ) and (- )
indications in the battery compartment.
m'!i&
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause
a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
._.
Remote control sensor
----j
I
I,
-
,
, ,
-
,
.
r
.........,.
.I
1T(5m)
i
~O
POWER
SLEEP
ope
0
0
0
0
/3~
I "
30°, -,- \ - - . , 30°
30°
~
~'"
8
,,'
y'
II
IMPORTANT:
The POWER indicator on the AQUOS television should light BLUE indicating you have
power to the AQUOS television.
TV
SOURCE
If the POWER indicator on the AQUOS television still does not light up, press TV POWER
on the remote control to turn the power on.
TIl
o
VCR
0
o
0
AUDIO
0
caL/SAT ovo MeltON
8
8
0
LIGHT
@)
8
G 8
0 0 CD
REC
8
(3
@
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
@-8
Contents
IMPORTANT INFORMATION
Trademarks
DEAR SHARP CUSTOMER
IMPORTANT SAFETY INSTRUCTIONS
Supplied Accessories
QUICK REFERENCE
Attaching the Speaker Unit
Attaching the Stand
Contents
Part Names
TV (Front)
TV (Rear/Side)
Remote Control Unit
Preparation
Using the Remote Control Unit
Cautions Regarding the Remote Control Unit
Antennas
Connecting Audiovisual Equipment
Using Digital Audio Output
Connecting HDMI Equipment
Connecting a PC
Watching TV
Turning On/Off the Power
Initial Setup
Direct Button Operation
Changing Channels
Changing Volume
MUTE
Sleep Timer
FLASHBACK
SURROUND
FREEZE
INPUT
AV MODE
AUDIO
Closed Captions and Digital Closed Captions
VIEW MODE
On-Screen Display Menu
Menu Items
On-Screen Display Menu Operation
Menu Operation Buttons
Picture Menu
OPC Setting
Advanced Picture Setting
Audio Menu
Surround
Bass Enhancer
Power Control Menu
No Signal Off
No Operation Off
Setup Menu
EZ Setup
CH Setup
Antenna Setup-DIGITAL
Input Skip
Input Label
Input Signal (for Analog PC Input Mode Only)
Auto Sync. Adjustment
(for Analog PC Input Mode Only)
Fine Sync. Adjustment
Position
Language
Reset
Parental CTRL (Parental Control Setting)
Option Menu
1
2
3
3
5
5
5
6
9
10
10
10
11
12
12
12
12
13
14
14
14
15
15
15
16
16
16
16
16
16
16
16
16
17
17
18
19
20
20
21
21
22
22
22
23
23
23
24
24
24
24
24
25
25
25
25
25
25
25
26
26
26
26
29
Audio Only
29
Input Select
29
HDMI Setup
29
Output Select
29
Color System
29
Caption Setup
30
Digital Caption Info.
(Digital Caption Information)
30
Program Title Display
30
Favorite CH (Favorite Channel Setting)
30
Game Play Time
30
Operation Lock Out
30
Demo Mode
30
Digital Setup Menu
31
Audio Setup
31
Identification
31
Software Update
31
Other Viewing Options
33
Presetting Remote Control Function
33
Operating the Connected Equipment
33
Using AQUOS LINK
35
Controlling HDMI Equipment Using AQUaS LINK 35
AQUaS LINK Setup
36
One Touch Recording
36
One Touch Playback
36
AQUaS LINK Menu
37
Timer Recording
37
Playback of Titles Using AQUaS LINK
37
Selecting Media Type for CEC-Compatible
Recorder
37
Listening with the AQUaS AUDIO Speaker
System
37
Manually Changing AQUaS AUDIO Speaker
System's Sound Mode
37
HDMI Device Selection
37
Using the Internet
38
Internet Setup
38
Interactive Service
39
Displaying the Sidebar Widget
39
Entering Text (Software Keyboard)
.40
Using the Browser
.41
Using the Toolbar
.42
Using Tabs
.42
Saving the URL of the Current Page
.43
Opening a Bookmarked Page
.43
Editing Bookmarks
.43
Browser Settings
.44
Appendix
45
Removing the Stand
45
Setting the TV on the Wall
46
Troubleshooting
47
Troubleshooting-Digital Broadcasting
47
RS-232C Port Specifications
48
Specifications.................................................. 49
Optional Accessory
49
PC Compatibility Chart
50
Information on the Software License for This
Product
51
Calling for Service
52
LIMITED WARRANTY
52
Dimensional Drawings
• The dimensional drawings for the LCD TV set are shown
on the inside back cover.
@-9
Part Names
TV (Front)
/
Remote control sensor
I
...
I
"c
-"
"I
J r
r
POWER
E~
\..
SLEEP
OPC sensor (See page 22.)
""
OPC
& - - OPC indicator (See page 22.)
SLEEP indicator (See page 16.)
POWER indicator (See page 15.)
~
TV (Rear/Side)
i_
R
y@
1-
COMPONENT
p,@
_-1I
"-1
POWER button
I
I
DIGITAL
AUDIO
OUTPUT
MENU
1
MENU button
RS-232C
terminal
INPUT
_--INPUT button
INPUT 3
terminals
@)
VIDEO
CH
v
Channel buttons
(CH/\fV)
DIGITAL AUDIO
OUTPUT terminal
VOL
1-I
_+_Volume
INPUT 4 terminal
(HDMI)
INPUT 5 terminal
(HOM I)
buttons
(VOL+f-)
INPUT 6 terminals
(HDMI)
HOMI
D
SERVICE
terminal
SERVICE
INPUT 7 terminals
(PC-IN)
ANALOG AGB
(PCINI@
AUDIO
ETHERNET
terminal
Antenna/Cable in
INPUT 2 terminals
--
ETHERNET
INPUT 1 terminals
IIO/IDOl
AUDIO OUTPUT
terminals
-r=============r-=================F====1
----1------1--------1---1
----1------1--------1---1
~-----I--------I----
-
[~'l[~J
AC INPUT terminal
@-10
Part Names
TV POWER: Switch the TV power on or enters standby, (See
page 15.)
Remote Control Unit
17
1
2
_.L-...!!!!~~:"
3--=--·
18
19
2
DISPLAY: Display the channel information,
3
SOURCE POWER: Turns the power of the external equipment
on and off.
4
External equipment operational buttons: Operate the external
equipment
5
0-9: Set the channel. (See page 16,)
6
• (DOT): (See pages 16 and 33,)
7
NET: Switches the display to the Sidebar Widget, TV + Web, Web
or TV screen, (See pages 38 to 44 for details,)
8
INPUT: Select a TV input source, (TV, INPUT 1, INPUT 2, INPUT 3,
INPUT 4, INPUT 5, INPUT 6, INPUT 7) (See page 16.)
9
VOL + 1-: Set the volume, (See page 16.)
10 SURROUND: Select Surround settings, (See page 16,)
11
FREEZE: Set the still image, Press again to return to normal
screen. (See page 16,)
12 EXIT: Turn off the menu screen.
6
---=--:~
L....;;=.,..
20
7-""";""8 ----;;..---9----:.....---..al
21
22
10---
23
11 ----.;;.-
_:....-- 24
>---25
12
EXIT
-~,-0
Q;;ZL!~~~
27
14
28
15
-----.:.--;:!iJ
CC
~
29
~
16 AUDIO: Selects the MTS/SAP or the audio mode during multichannel audio broadcasts, (See page 17,)
17 FUNCTION: Switches the remote control for TV, CBUSAT, VCR,
DVD and AUDIO operation, Indicator lights up for the current
mode. (See pages 33 to 34 for details.)
• To enter the code registration mode, you need to press
FUNCTION and DISPLAY at the same time.
18 LIGHT .:0.: When this button is pressed, some buttons (for
example, VOL+I- and CH/\/V) on the remote control unit will
light. The lighting will turn off if no operations are performed within
about 5 seconds. This button is used for performing operations in
low-light situations,
19 VIEW MODE: Select the screen size. (See page 19.)
21
,
1 6 - - - -.....
15 SLEEP: Set the sleep timer. (See page 16,)
20 ENT: Jumps to a channel after selecting with the 0-9 buttons.
~
~
14 REC STOP: Stops one touch recording. This button will function
only when AQUOS LINK is used, (See pages 35 to 37 for details.)
e:----:-- 26
13 _.1..'..=1@===F(I)~RIT~~~H_~,;;;",_ I
SLEEP AUDIO AVl.40DE
13 OPTION: Display the AQUOS LINK MENU screen. This button
will function only when AQUOS LINK is used, (See pages 35 to 37
for details,)
L..--~--30
4
FLASHBACK: Return to the previous channel or external input
mode, (See page 16,)
22 CH/\/V: Select the channel. (See page 16,)
23 MUTE: Mute the sound, (See page 16.)
24
MENU: Display the menu screen,
25
J;./T1 "'/~, ENTER: Select a desired item on the screen,
26
RETURN: Return to the previous menu screen.
27
FAVORITE CH
A, B, C, D: Select 4 preset favorite channels in 4 different
categories. (See page 30.)
While watching, you can toggle the selected channels by pressing
A, B, C and D.
28
FAVORITE: Set the favorite channels, (See page 30.)
29 CC: Display captions from a closed-caption source. (See page 18.)
cmD
• When using the remote control unit, point it at the 1V
30 AV MODE: Select an audio or video setting.
(When the input source is TV, INPUT 1,2 or 3: STANDARD,
MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC. When
the input source is INPUT 4,5,6 or 7: STANDARD, MOVIE,
GAME, PC, xvYCC (INPUT 4/5/6 only) USER, DYNAMIC (Fixed),
DYNAMIC) (See page 17,)
@-
11
Preparation
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor on the
1V. Objects between the remote control unit and the remote control sensor may
prevent proper operation.
Cautions Regarding the Remote Control Unit
• Do not expose the remote control unit to shock. In addition, do not expose the remote
control unit to liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit in direct sunlight. The heat may cause
deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on the TV is in
direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV,
or operate the remote control unit closer to the remote control sensor.
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the 1V set.
~
F-type connector should be finger~ tightened only.
1.A 75-ohm system is generally a round cable with an
F-type connector that can easily be attached to a terminal
without tools (commercially available).
----oct}
When connecting the RF cable to the 1V set, do not
tighten the F-type connector with tools.
If tools are used, it may cause damage to your 1V
set. (The breaking of internal circuit, etc.)
F-type connector
I
75-ohm coaxial cable (round)
~X~IYpe co"eclo,
2.A 300-ohm system is a flat "twin-lead" cable that can be
attached to a 75-ohm terminal through a 300/75-ohm
adapter (commercially available).
'"
(
.!====:::::::::::~=~
75-ohm coaxial cable
300-ohm twin-lead cable (flat)
Connecting Antenna Cable
Home antenna
terminal (75-ohm)
CD
®
~
..
Ca.ble.TV
. .'eiiiiad.-ln
Cable without a CATV
converter
e-====\j==<J
Coaxial cable
(commercially available)
VHF/UHF antenna
Home antenna
[!j
75-ohm coaxial cable (round)
1.0.0
terminal (75·ohm)
......
e:-====\j==~
• Connect the antenna cable
to the TV using one of the
methods in the illustration
as shown (CD, ®, @ or @).
Coaxial cable
(commercially available)
@ Combination VHF/
UHF antenna
300-ohm twin-lead cable (flat)
VHF
300175-ohm adapter
(commercially available)
UHF
ANTENNA ANTENNA
@ Separate VHF/UHF
antenna
twin-lead cable
.
300-ohm ,""n-Iead cable
75-ohm co.,;al cable
@·12
r
300-ohm
Combiner
\~~~C~~
available)
-liN
I
\
~---
OUTI-------lBllllll.......---+f:--;\~_-i-I( -_~_6__
To TV antenna
c=:
terminal
I
L.J
1'--;=G§fJ=~~=.,--
Preparation
You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD
player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images,
select the input source from INPUT on the remote control unit or on the TV. (See page 16.)
B!.iiID
• To protect equipment, always turn off the 1V before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting Audiovisual Equipment
You can use the INPUT 1, INPUT 2 or INPUT 3 terminals when connecting to a Blu-ray disc player, HD-DVD
player, DVD player, a Digital TV STB (Air or Cable), VCR, game console, and camcorder.
When using composite cable (INPUT 1, 2 or 3):
Blu-ray disc player/HD-DVD player/
DVD player/Digital TV STBNCR/
Game console/Camcorder
VIDEO
@'.........
,
I
AUDIO
I
AV cable
(commercially available)
@._I--+-----------_..
.@,......J
When using component cable (INPUT 1 or 3):
Blu-ray disc player/HD-DVD player/
DVD player/Digital TV STB
y((t:..........
P€:
~
Component video cable
(commercially available)
-+--------------'
:~ l------------~~~===:J~~
~
Audio cable (commercially available)
When using S-VIDEO cable (INPUT 2):
VCR/Game console/
S-VIDEO cable
Camcorder
5-VIOEO
(commercially available)
0I
'@ ........
.vooo
1-
.@..-.....,
AUDIO cable
(commercially available)
_
S-VIDEO
VIDEO
mm
• To enjoy the AQUaS 1D8Dp display capability, connect your external equipment using a component cable and set the
equipment to 1D8Dp output.
• See page 14 for connecting a Blu-ray disc player, HD-DVD player, DVD player or a Digital1V STB to the HDMI terminal.
• The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)
@)- 13
Preparation
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio
outputs from the terminal.
DIGITAL
AUDIO
OUTPUT
To optical digital input of
external audio devices
DIGITAL
AUDIO
INPUT
~D
Optical fiber cable
(commercially available)
ImIi)
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.
Connecting HDMI Equipment
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
iiilim,
HDMI-certified cable
(commercially available)
ID~~------~
HOMI equipment
ImIi)
• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
• To enjoy the AQUaS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment
using an HDMI-certified cable and set the equipment to 1080p output.
Connecting a PC
When connecting to a PC with an analog RGB terminal (INPUT 7):
~
RGB cable
(commercially available)
!~-----~III
PC
03.5 mm stereo minijack cable
(commercially available)
When connecting to a PC with an HOMI terminal (INPUT 4, 5 or 6):
Homl
HDMI-certified cable
(commercially available)
m~I-------~
PC
• The HDMI terminals only support digital signal.
• Refer to page 50 for a list of PC signals compatible with the TV.
@-14
Watching TV
Turning On/Off the Power
I~
~WER I
II
I
I.I~
POWER
o
INPUT
T v j TV
SOURCE
VCR
Aumo
LIGHT
I
88CIDI
\
mm
Press POWER on the N, or TV POWER on the remote control unit
again to turn the power off.
!---.
trr~~~===~~TV POWER
I
'I (On/Standby)
I
CB~SAT o~o FU~ON I
IJ
• POWER indicator (Blue): The lV is on. (After a few seconds, a window
appears with sound.)
• The initial setup starts when the lV powers on for the first time. If the lV has
been turned on before, the EZ Setup will not be invoked. See page 24 for
performing EZ Setup from the Setup menu.
o
il
.----:r
'In
MENU
Press POWER on the N, or TV POWER on the remote control unit to
turn the power on.
• The lV enters standby and the image on the screen disappears.
• The POWER indicator on the lV turns off.
mm
• If you are not going to use this lV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the lV is turned off.
Initial Setup
When you turn on the N for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press TV POWER on the
remote control unit.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your lV
when selecting "Air" or "Cable".
3
Press .... /~ to select "Air" or "Cable".
Press ENTER to enter the setting.
Example
1. Insert the batteries into the remote control unit. (See page 8.)
2. Connect the antenna cable to the lV. (See page 12.)
3. Plug in the AC cord to the AC outlet. (See page 7.)
\'OZE ~ MOU II
1\J~~o·1
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
CH Search (Channel search)
Channel auto search makes the lV look for all channels
viewable in the set area.
1
4
Press JIt./T to select the desired language listed on the
screen, and then press ENTER.
TV Location
Select "Home" or "Store" for the location where you plan to
install the lV.
2
Press .... /~ to select "Home" or "Store".
Press ENTER to enter the setting.
When "Air" is selected in Antenna setting:
Press .... /~ to select "Start", and then press ENTER.
When "Cable" is selected in Antenna setting:
Press J/i..lT to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER.
Example
mm
• If you select "Home", AV MODE is set to "STANDARD".
• If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
In case no remote control signal is received within 30 minutes,
AV MODE will change to "DYNAMIC (Fixed)" automatically.
• For changing the lV Location after the setting, see "EZ
Setup" on page 24.
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel", and
then press ENTER.
mm
• If no channel is found, confirm the type of connection made
with your lV and try EZ Setup again.
(See page 24.)
@-15
Direct Button Operation
8
•
8
FREEZE
•• •• ••
•• •• ••
~ ••
INPUT FLASHBACK
VOL
CH
• IMeE
MENU
ec::::I:::::>0
8@8
<::::::::!:::::
EXIT
RETURN
9
0
-
0
@
FAVORITE CH -
0®@
RECSTOP OPTION
FAVORITE
00
0
••••
SLEEP AUDIO AVMOOE
Changing Channels
You can change channels by pressing CH/\lV or 0-9.
• (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g., Channel 5):
Press 5 -----7 ENT.
To select a 3-digit channel number (e. g., Channel 115):
Press 1 -----7 1 -----7 5 -----7 ENT.
To select a 4-digit channel number (e. g., Channel 22.1):
Press 2 -----7 2 -----7 • (DOn -----7 1 -----7ENT.
Em
• When selecting a 1-digit channel number. it is not
•
•
•
• The remaining time displays when the sleep timer has been set.
• Each time you press SLEEP, the remaining time switches
as shown below.
Off
... 30'" 60 ... 90 ... 120
t
,
CC
SURROUND
•
Sleep Timer
Allows you to set a time when the N automatically
switches to standby.
Press SLEEP.
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
Changing Volume
You can change the volume by pressing VOL+/- on
the N or on the remote control unit.
• To increase the volume, press VOL+.
• To decrease the volume, press VOL-.
• When set, the time automatically starts counting down.
• If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• Five minutes before the time expires, the remaining time
displays every minute.
Em
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time reaches zero.
• When the sleep timer is set, its indicator on the TV lights red.
FLASHBACK
Press FLASHBACK to switch to the previously tuned
channel.
• Press FLASHBACK again to switch back to the currently
tuned channel.
Em
• FLASHBACK will not work if no channel has been changed
after the TV is turned on.
SURROUND
The surround function produces Surround effect from
the speakers. Each time you press SURROUND, the
mode changes between On and Off.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
Em
• You can have the same settings by choosing "Surround" on
the menu items. (See page 23.)
FREEZE
Allows you to capture and freeze a moving image that
you are watching.
Press FREEZE.
Audio status
• A moving image is captured.
• Press FREEZE again to cancel the function.
Speaker
Variable sound
Mute
• When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
Em
• See page 29 for details on the Output Select function.
MUTE
Em
• When this function is not available, "No displaying still
image available." will display.
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
INPUT
Mutes the current sound output.
Press MUTE.
To view external source images, select the input source
using INPUT on the remote control unit or on the N.
1 Press INPUT.
• "[~" will be displayed on the screen for 30 minutes. and
the sound is silenced.
2
Em
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
- Mute will be canceled if you press VOL + 1- or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
@-16
• A list of selectable sources appears.
Press INPUT again or press JJ..I~ to select the
input source.
• An image from the selected source automatically displays.
• Each time INPUT is pressed, the input source toggles.
• If the corresponding input is not plugged in, you cannot change
the input. Be sure to connect the equipment beforehand.
Em
• See pages 13 and 14 for external equipment connection.
Direct Button Operation
AVMODE
AUDIO
AV MODE gives you 8 viewing options to choose from
to best match the surrounding environment of the 1V,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
Press AV MODE. Current AV MODE displays.
• Press AV MODE again before the mode displayed on the
screen disappears. The mode changes as shown below:
Example:
When the input source is TV, INPUT 1, 2 or 3 terminals
STANDARD - MOVIE -GAME - USER (TV]
t
DYNAMIC
•
I
DYNAMIC (Fixed)
Example:
When the input source is INPUT 4, 5, 6 or 7 terminals
STANDARD - MOVIE -GAME - PC - xvYCC*
t
DYNAMIC -
•
DYNAMIC (Fixed)- USER[ J
I
* "xvYCC" can only be selected when an xvYCC signal is
input using INPUT 4 to 6.
STANDARD: For a highly defined image in a normal
lighting.
[Enhanced Picture Contrast: on]
MOVIE: For a movie.
[Enhanced Picture Contrast: off]
GAME: Lowers image brightness for easier viewing.
[Enhanced Picture Contrast: off]
PC: For PC.
[Enhanced Picture Contrast: off]
xvYCC: Supports the xvYCC international standard
for wide color space. The xvYCC signal allows you
to experience colors that conventional color signals
cannot reproduce.
[Enhanced Picture Contrast: off]
USER: Allows the user to customize settings as desired.
You can set the mode for each input source.
[Enhanced Picture Contrast: off]
DYNAMIC (Fixed): Changes the image and sound
settings to the factory preset values. No adjustments
are allowed.
[Enhanced Picture Contrast: on)
DYNAMIC: For a clear-cut image emphasizing high
contrast, useful for sports viewing.
[Enhanced Picture Contrast: on)
mm
• MTS/SAP stereo mode
The 1V has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The 1V
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a 1V station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.
• Stereo broadcasts: View programs like live sporting
events, shows and concerts in dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in either MAIN or
SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
You can change MTS as shown below to match the television
broadcast signal.
Press AUDIO to toggle between audio modes.
Examples: when receiving MTS and SAP
STEREO mode: STEREO- MONO
STEREO + SAP mode: ST(SAP) - SAP(ST)- MONO
t
MAIN + SAP mode: MAIN-SAP
MONO mode: MONO
• Digital broadcasting audio mode
The types of audio transmitted in a digital broadcast include
SURROUND as well as MONO and STEREO. In addition, it
is possible for multiple audio tracks to accompany a single
video track.
Press AUDIO to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO (Audio1) - STEREO (Audio2)
L.- SURROUND (Audio3) ......
mm
• MTS only operates while in TV mode.
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
• When you play games, "GAME" is recommended for AV
MODE.
• "Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
@-17
Direct Button Operation
Closed Captions and Digital Closed Captions
Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations, narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs and on
some VHS home video tapes at the discretion of the
program provider.
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the
discretion of the service provider). It is a more flexible
system than the original Closed Caption system,
because it allows for a variety of caption sizes and font
styles. When the Digital Closed Caption service is in
use, it will be indicated by the appearance of a 3-letter
abbreviation that also indicates the language of the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA (French) or other language codes.
Not all programs and VHS videotapes offer closed
captions. Please look for the ''[ccr symbol to ensure
that captions will be shown.
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by its
own number. The "CC1 " and "CC2" services display
subtitles of TV programs superimposed over the
program's picture.
In the Closed Caption system, the "Text1" or "Text2"
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
1
Press CC.
• This will present the Closed Caption information
display.
2
Press CC while the Closed Caption information is
still on the screen.
• Press repeatedly until you select the desired closed
caption service.
Closed Caption
information
• Depending on the number of caption services in the
signal being received, you will see information such as
1/2 or 1/4 displayed.
1/2 means "the first of two services".
Example:
If a program has three services (Digital CC(ENG), CC1
and Text1), the closed caption display will toggle in this
sequence:
_
...II1II.........
• The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g. "1/3(CC1)".
Closed Caption services that appear in parentheses will
not be stored in the CC button's memory as your last
selected service. Only services that you have selected
with the CC button are stored.
Examples:
In a case where there are two closed caption
services provided (for instance, Digital CC(ENG)
and CC1), and Digital CC(ENG) is displayed
as your current selection, if Digital CC(ENG) is
not broadcast for the next program, the other
closed caption service, CC1, will be displayed in
parentheses.
A closed caption service appears in parentheses
because the service you selected is not available
and a different service is displayed on your screen.
"1/1(CC1)" is displayed instead of "1/2/ENG".
crm
• See page 30 for detailed closed caption settings.
• When the program contains no closed caption, ".." displays
in the closed caption information.
• If the language code, e.g. "ENG", is not found on Digital TV
programs, "--" will be shown.
• Four kinds of closed caption service (CC1, CC2, Text 1,
Text2) are potentially available, but a broadcast may contain
none or only some of these services at the discretion of the
program provider.
• When the Sidebar Widget, TV+Web or Web is displayed,
Closed Captions are not available.
@). 18
Direct Button Operation
VIEW MODE
You can select the screen size,
1
Press VIEW MODE,
• The View Mode menu displays.
• The menu lists the View Mode options selectable for the type of video signal currently being received,
2 Press VIEW MODE or Ji..1,. while the View Mode menu is displayed to select a desired item on the menu.
• You can sequentially select a View Mode that has its own aspect ratio.
• For 4:3 programs
Example: Screen size images
Side Bar
S.Stretch (Smart stretch)
1M)
Suitable for viewing
conventional 4:3 programs in
their normal format.
Zoom
Stretch
caJ
bQJ
Suitable for stretching 4:3
programs to fill the screen,
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
1:0:1
This mode is useful for 1.78: 1
DVDs. When viewing 1.85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.
• For HD programs
Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at
the top and bottom of the screen.
Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on
the screen.
Full Screen (720p only): You can select "Full Screen" only when receiving a nop signal.
S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to fill the screen.
Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.
mm
• When using Dot by Dot, it is possible to see noise or bars around different outer portions of the screen. Please change view
mode to correct this.
• For PC input mode
mm
• Connect the PC before making adjustments. (See page 14.)
• Selectable screen size may vary with input signal type.
Example: Screen size images
Input signal
[OJ
4:3
Normal
•
Input signal
16:9
Stretch
Dot by Dot
[Q] [OJ [0] IQI
Keeps the original
aspect ratio in a full
screen display.
Stretch
•
Zoom
For viewing
widescreen
programs. The top
and bottom of the
image is cropped,
An image fully fills the
screen.
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
Dot by Dot
[0] [Q]
An image fully fills the
screen.
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
@- 19
On-Screen Display Menu
Menu Items
For TV/INPUT 1/2/3 Mode
For HDMI/PC-IN Mode
For HTML Mode
Picture Menu
OPC
Backlight...
Contrast
Brightness
Color
Tint
Sharpness
Advanced
C.M.S.-Hue
C.M.S.-Saturation
Color Temp
Active Contrast
Fine Motion Advanced
liP Setting
Film Mode
Digital Noise Reduction
3D-YIC
Monochrome
Range of OPC
Reset
Page 22
Page 22
Page 22
Page 22
Page 22
Page 23
Page 23
Page 23
Page 23
Page 23
Page 23
Page 22
Picture Menu
OPC
Backlight..
Contrast
Brightness
Color
Tint
Sharpness
Advanced
C.M.S.-Hue
C.M.S.-Saturation
Color Temp
Active Contrast
Fine Motion Advanced
liP Setting
Film Mode
Digital Noise Reduction
Monochrome
Range of OPC
Reset
Picture Menu
OPC
Backlight..
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Color Temp
Fine Motion Advanced
Range of OPC
Reset
Audio Menu
Treble
Bass
Balance
Surround
Bass Enhancer
Reset
Page
Page
Page
Page
Page
Page
Power Control Menu
No Signal Off
No Operation Off
Page 24
Page 24
Page
Page
Page
Page
Page
Page
Page
22
22
22
22
22
22
22
23
23
23
23
23
23
Setup Menu
EZ Setup
CH Setup
Antenna Setup-DIGITAL
Input Skip
Input Label
Parental CTRL
Position
Language
Reset
Page 24
Page 25
Page 25
Page 25
Page 25
Pages 26-28
Page 26
Page 26
Page 26
Option Menu
AQUOS LINK Setup
Audio Only
Input Select
Output Select
Color System
Caption Setup
Digital Caption Info
Program Title Display
Favorite CH
Game Play Time
Operation Lock Out..
Demo Mode
Pages 35-37
Page 29
Page 29
Page 29
Page 29
Page 30
Page 30
Page 30
Page 30
Page 30
Page 30
Page 30
Digital Setup Menu
Audio Setup
Communication Setup
Interactive Service
Identification
Software Update
Page 31
Page 39
Page 39
Page 31
Pages 31-32
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 23
Page 23
Page 23
Page 23
Page 23
Page 22
Audio Menu
Treble
Bass
Balance
Surround
Bass Enhancer
Reset
Page
Page
Page
Page
Page
Page
Power Control Menu
No Signal Off
No Operation Off
Page 24
Page 24
Setup Menu
Input Skip
Input Signal
Auto Sync
Input Label
Fine Sync
Position
Language
Reset
Page 25
Page 25
Page 25
Page 25
Page 25
Page 26
Page 26
Page 26
23
23
23
23
23
23
Option Menu
AQUOS LINK Setup
Audio Only
HDMI Setup
Output Select
Game Play Time
Operation Lock Out..
Demo Mode
Pages 35-37
Page 29
Page 29
Page 29
Page 30
Page 30
Page 30
Digital Setup Menu
Software Update
Pages 31-32
1m
• Some menu items may not be displayed depending on the selected input source.
®D- 20
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 22
Page 23
Page 22
Audio Menu
Treble
Bass
Balance
Surround
Bass Enhancer
Reset
Page 23
Page 23
Page 23
Page 23
Page 23
Page 23
Power Control Menu
No Operation Off
Page 24
Setup Menu
Input Skip
Language
Reset
Page 25
Page 26
Page 26
Option Menu
AQUOS LINK Setup
Audio Only
Game Play Time
Operation Lock Out..
Pages 35-37
Page 29
Page 30
Page 30
On-Screen Display Menu
On-Screen Display Menu Operation
Example
Example
7/
. , Picture
@
Option
"="111="
'-----------@
G) Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
item.
® Item in brackets
• This indicates the current setting for the item.
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
G) Press
~/~ to select the desired item.
® Press .. IT to select the desired item.
@ Press
~/~ to adjust the item.
@ Item displayed in white
• This indicates that the item can be selected.
@ Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
-Nothing is connected to the selected input terminal.
- The function is not compatible with the current input
signal.
mm
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to
operate the menu.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
POOW'R
•
•
MENU: MENU on the remote
control.
MENU
INPUT
MENU:
Press to open or close the menu screen.
J!IIf'f/ ..../~:
Press to select a desired item on the screen or
adjust a selected item.
ENTER:
Press to go to the next step or complete the
setting.
RETURN:
Press to return to the previous step.
INPUT: ENTER on the remote
control.
r
CHI\IV: Cursor J!II.1'f on the
remote control.
I:
VOL + 1-: Cursor .... /~ on the
remote control.
CH
VOL
@- 21
On-Screen Display Menu
Picture Menu
Adjusts the picture to your preference with the
following picture settings.
Example
'II
Picture
mm
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
• When set to "On" or "On: Display", the OPC indicator on
the 1V lights green.
Advanced Picture Setting
This TV provides various advanced functions for
optimizing the picture quality.
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
mm
• For resetting all adjustment items to the factory preset
values, press J;./T to select "Reset", and then press
ENTER.
1
Press MENU to display the MENU screen, and then
press .... /~ to select "Picture".
2
Press
JJJ'"
to select a specific adjustment item.
• Select "Advanced" and then press ENTER to set
"C.M.S. -Hue", "C.M.S.-Saturation", "Color Temp.",
"Active Contrast", "Fine Motion Advanced", "liP
Setting", "Film Mode", "Digital Noise Reduction", "3D-YI
C", "Monochrome" or "Range of OPC".
3
4
Press Ji..I'''' (or .... /~) to select the desired setting,
and then press ENTER.
Press MENU to exit.
i;tlj$8I~~·itiriJ~T: i1llf?i;;Ci~""~Q"'~~tI~!;; k';~~~5:.b:··
Backlight
The screen dims
The screen
briqhtens
For less contrast
For more contrast
Contrast
Brightness
For less
For more
briqhtness
briqhtness
~._------+-=-"='-:::"=-=-=----+-=-~:::"=-=-=------1
Color
For less color
For more color
intensity
intensity
Skin tones
Skin tones
Tint
become reddish
become qreenish
. For less
For more
Sharpness
sharpness
sharpness
• For resetting all Picture adjustment items to the factory
preset values, press J;./T to select "Reset", press ENTER,
press .... /~ to select "Yes", and then press ENTER.
ope· Setting
Automatically adjusts the brightness of the screen.
Off: The brightness is fixed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
@- 22
For a better white balance, use color temperature
correction.
t
High:
White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low:
White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of -30 for each color temperature.
R Gain: -30 through +30
G Gain: -30 through +30
B Gain: -30 through +30
mm
• For resetting all adjustment items to the factory preset
values, press J;./T to select "Reset", and then press
ENTER.
~TActiV;f~on6stf~~,J'
,.
.
,= .......__
.~
_~,'Ol".
Automatically adjusts the image contrast according to
the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
On-Screen Display Menu
Audio Menu
Converts input signals depending on the type of
images.
Fast: Suitable for fast-moving images
Slow: Suitable for smooth images with low amounts of
flickers
You can adjust the sound quality to your preference
with the following settings.
Example
I
11m
• "liP Setting" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
On: Detects, analyzes, converts film source.
Off: Normal viewing mode.
t)
Audio
Treble
[ 0]
-15
+15
Bass
[ 0]
-15
+15
Balance
[ 0]
L
Surround
[Off]
Bass Enhancer
[On]
Reset
VOL
11m
• "Film Mode" does not function when you set the "AV Mode"
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off (20): For Game Mode.
11m
• 3D-YIC is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be set to
a maximum of + 16 and a minimum of -16.
Max.: -15 through + 16
Min.: -16 through + 15
11m
• The range of OPC settings are active only when the OPC is
set to "On".
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
CH
j+) A
.U &I
SURROUND
MUTE
0
,-,
to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480P, nop, or 1080P.
Produces a clearer video image.
Off: No adjustment
High: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction
R
FREEZE
MENU
O~.
EO""
$" RORN
1
Press MENU to display the MENU screen, and then
press .... /~ to select "Audio".
2
Press .. /~ to select a specific adjustment item.
• Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item.
Press JJ;/~ (or .... /~) to select the desired setting,
and then press ENTER.
3
4
Press MENU to exit.
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio from
the left speaker
11m
• Audio menu is grayed out when Output Select is set to "Variable".
• For resetting all Audio adjustment items to the factory
preset values, press .,/T to select "Reset", press ENTER,
press ~/~ to select "Yes", and then press ENTER.
Surround
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on.
Off: Normal sound.
11m
• You can choose Surround by pressing SURROUND on the
remote control unit. (See page 16.)
• Audio menu is grayed out when Output Select is set to "Variable".
• For some discs, setup may be required on your DVD player. In this
case, please refer to the operation manual of your DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
11m
• Audio menu is grayed out when Output Select is set to "Variable".
@-
23
On-Screen Display Menu
Power Control Menu
Setup Menu
Power control setting allows you to save energy.
Example
Example
I \,'1
~,"
Setup
Power Control
EZ Setup
No Signal Off
[Disable]
No Operation Off
[Disable]
CH Setup
Antenna Setup-DIGITAL
m~$.': III
I
I
EXIT . .
,0
1
2
3
4
7
Input Skip
Parental CTRL
Position
RETURN
0
[English]
Language
Press MENU to display the MENU screen, and then
press .... /~ to select "Power Control".
Press iJ./~ to select a "No Signal Off" or "No
Operation Off", and then press ENTER.
Press ..../~ to select "Enable", and then press
Reset
VOL
SURROUND
j+)
o(d
ENTER,
Press MENU to exit.
CH
MUTE
°
MENU
_ _. 0
No Signal Off
When set to"Enable", the power will automatically shut
down if there is no signal for 15 minutes.
1m
• Five minutes before the power shuts down, the remaining
1
Press MENU to display the MENU screen, and then
press .... /~ to select "Setup".
time displays every minute,
• "Disable" is the factory preset value,
• When a TV program finishes, this function may not operate,
2
Press JJr..!~ to select a specific adjustment item,
and then press ENTER,
• When you select "EZ Setup", "CH Setup", "Parental
CTRL" or "Reset", you can enter the 4-digit secret
number here. See page 26 for setting a secret number.
No Operation Off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
3
1m
• Five minutes before the power shuts down, the remaining
4
time displays every minute,
• "Disable" is the factory preset value,
Press iJ./~ (or .... /~) to select the desired setting,
and then press ENTER.
Press MENU to exit.
EZSetup
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV.
• If you select "Home", AV MODE is set to "STANDARD".
• If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
In case no remote control signal is received within 30
minutes, AV MODE will change to "DYNAMIC (Fixed)"
automatically.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
1m
• See "Initial Setup" on page 15 for setting each item.
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
@- 24
On-Screen Display Menu
CH Setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your 1V when selecting "Air" or "Cable".
CH Search: Channel auto search makes the 1V look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On: Skips channels. (Channel selection disabled using CH
!\/V·)
Off: Does not skip channels. (Channel selection enabled using
CH!\/V·)
Remove Scrambled CH: This function makes the 1V
look for and then delete digital cable channels that
are scrambled and so unavailable in the set area. The
process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
mm
• See "Initial Setup" on page 15 for setting each item.
• If no channel is found, confirm the type of connection made
with your 1V and try channel search again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
Antenna Setup-DIGITAL
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna SetupDIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
channel.
• This function is available for DIGITAL (Air) only.
Input Skip
This setting allows you to skip the HOMI or PC-IN Input
("Input 4 (HOMI)", "Input 5 (HOMI)", "Input 6 (HOMI)"
and "Input 7 (RGB)") on the Input Selection operation.
Yes: Skips the input.
No: Does not skip input.
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
JilT I .... /~ to select the new name for the input
mode.
Input Signal
(for Analog PC Input Mode Only)
Some input signals may have to be registered manually
to display properly. The pair of input signals (resolutions)
in the list below is not distinguishable when received.
In such a case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
11024 x 768
1360 x 768
I
cmD
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
Auto Sync. Adjustment
(for Analog PC Input Mode Only)
For automatically adjusting the PC image.
Yes: Auto Sync. starts and "Now adjusting the image."
displays.
No: This function does not work.
cmD
• When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if "Completed" displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the 1V and switch it on before
starting Auto Sync.
Fine Sync. Adjustment
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image flickers with vertical
stripes.
Phase: Adjust when characters have low contrast or
when the image flickers.
mm
• For resetting all Fine Sync. adjustment items to the factory
preset values, press ./~ to select "Reset", and then press
ENTER
• It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
• The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrical.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
• Using the software keyboard, you can enter up to 10
characters for text. (See page 40.)
cmD
• You cannot change labels if the INPUT SOURCE is 1V.
@-
25
On-Screen Display Menu
Position
For adjusting a picture's horizontal and vertical
position.
H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
em
• For resetting adjustments to the factory preset values,
press Il/T to select "Reset", and then press ENTER.
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
• Adjustments are stored separately according to input
source.
Language
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1 "Return to the factory preset values" displays on the
screen.
• If you have already set the Secret No., input the 4-digit
secret number here.
2
Select "Yes".
• "Now, TV will restart automatically. OK?" displays on the
screen.
3
Select "Yes".
• "Now initializing... " displays on the screen and blinks.
After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings.
em
•
•
•
•
The Channel Setup settings will not be changed.
The Language settings will not be changed.
The Secret number settings will not be changed.
The TV Location settings will not be changed.
Parental CTRL
(Parental Control Setting)
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 26 to 28):
Secret No. is registered.
V-ChipN-Chip (DTV Only) settings have been made.
• The "V-Chip (DTV Only)" will only be selectable when
a new rating system can be downloaded via digital
broadcasting in the U.S.
3. "Status" is set to "On".
1.
2.
@- 26
• New Secret No.
You can set and change the secret number by using 0-9.
Input Secret No.: When you change the secret number,
enter the old 4-digit secret number here. The cursor
moves to "New Secret No.".
New Secret No.: When you set the new secret number,
enter the new 4-digit secret number here. The cursor
moves to "Reconfirm".
Reconfirm: Enter the same 4-digit number you set in
"New Secret No.".
• Secret No. Clear
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret number is not cleared.
em
• As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not be
selectable from the menu.
Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret number.
On: Enables Parental CTRL.
Off: Disables Parental CTRL.
V-CHIP is an electronic filtering device built into your
TV. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It
does so automatically once you activate the V-CHIP
feature in your TV. "V-Chip" and "Status" will not be
selectable from the menu if you do not first configure
your secret number.
• The U.S. has two rating systems for viewing content: TV
Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the
V-CHIP to help parents screen out inappropriate television
shows from their children.
• Movie ratings are used for original movies rated by the
Motion Picture Association of America (MPAA) as watched
on cable TV and not edited for television. The V-CHIP can
also be set to block MPAA-rated movies.
em
• The setting automatically enters "Block" for any ratings
below your selection.
• If Status is not set to "On", the configuration settings will
not work.
On-Screen Display Menu
• MPAA (Voluntary movie rating system)
Example
G: General audiences. All ages admitted.
PG: Parental guidance suggested. Some material may not be
suitable for children.
PG-13: Parents strongly cautioned. Some material may be
inappropriate for children under 13.
R: Restricted. Under 17 requires accompanying parent or adult
guardian (age varies in some jurisdictions).
NC-17: No one 17 and under admitted.
X: X is an older rating that is unified with NC-17 but may be
encoded in the data of older movies.
Press l.J" to adjust the item to your desired
position.
"6" indicates the item is blocked. Press MENU to
exit.
m:m
• Voluntary movie rating system only uses an age-based
rating.
• TV Parental Guidelines
Example
Pressl..I" to adjust the item to your desired position.
"a" indicates the item is blocked. Press MENU to exit.
Example
When setting an individual content-based rating item:
1 Press ~ or ENTER to access blocked content items
from the currently selected age-based rating item.
2 Press"/" to select an individual item, and then press
ENTER to unblock it ("6" is removed). Repeat the same
steps for the other items.
3
Press ~ or RETURN to register after all individual
content rating items are set.
Content
FV
(Fantasy
violence)
V
(Violence)
1V-Y (All children)
IZI
1V-Y7 (Directed to older children)
X
S
o
(Sexual
situation)
L
(Adult
language)
IZI
IZI
IZI
IZI
IZI
IZI
IZI
IZI
IZI
(Sexually
suggestive
dialog)
Suggested
1V-G (General audience)
IZI
IZI
IZI
age
1V-PG (Parental Guidance suggested)
X
X
X
X
1V-14 (Parents strongly cautioned)
X
X
X
X
1V-MA (Mature audience only)
X
X
X
IZI : The content rating can be set, but this rating is not normally broadcast by 1V stations.
X: Content rating can be set.
@- 27
On-Screen Display Menu
Canadian Rating Systems (Canadian English ratings and Canadian French ratings)
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC)
policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into consideration other
program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French
ratings.
• Canadian English Ratings
Example
Press JjJ'f to adjust the item to your desired
position. "6" indicates the item is blocked. Press
MENU to exit.
• Canadian French Ratings
Example
Press IJ)T to adjust the item to your desired
position. "6" indicates the item is blocked. Press
MENU to exit.
E: Exempt: Includes news, sports, documentaries and other
information programming; talk shows, music videos, and variety
programming.
C: Children: Intended for younger children under the age of 8
years. Pays careful attention to themes that could threaten their
sense of security and well-being.
CS+: Children over 8 years old: Contains no portrayal of violence
as the preferred, acceptable, or only way to resolve conflict; nor
encourage children to imitate dangerous acts which they may
see on the screen.
G: General: Considered acceptable for all age groups. Appropriate
viewing for the entire family, contains very little violence, physical,
verbal or emotional.
PG: Parental Guidance: Intended for a general audience, but may
not be suitable for younger children (under the age of 8) because
it could contain controversial themes or issues.
14+: Over 14 years: Could contain themes where violence is one
of the dominant elements of the storyline, but it must be integral
to the development of plot or character. Language usage could
be profane and nudity present within the context of the theme.
1S+: Adults: Intended for viewers 18 years and older and might contain
depictions of violence, which while related to the development of
plot, character or themes, are intended for adult viewing. Could
contain graphic language and portrayals of sex and nudity.
E: Exempt programming.
G: General: All ages and children, contains minimal direct violence,
but may be integrated into the plot in a humorous or unrealistic
manner.
Sans+: General but inadvisable for young children: May be viewed
by a wide public audience, but could contain scenes disturbing
to children under 8 who cannot distinguish between imaginary
and real situations.
Recommended for viewing with parent.
13ans+: Over 13 years: Could contain scenes of frequent violent
scenes and therefore recommended for viewing with parent.
16ans+: Over 16 years: Could contain frequent violent scenes and
intense violence.
1Sans+: Over 18 years: Only for adult viewing. Could contain
frequent violent scenes and extreme violence.
• How to temporarily release the V-CHIP BLOCK
When the V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.
1 Press ENTER while the V-CHIP is working, and then the secret number setting menu displays.
2 Input the 4-digit secret number by using 0-9. At this time V-CHIP BLOCK temporarily releases.
• Reactivating the temporarily released V-CHIP BLOCK
You can reactivate the temporarily released V-CHIP BLOCK as shown below.
• Select "Status" setting from the Parental CTRL menu to reactivate BLOCK. (See page 26.)
• Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to
reactivate BLOCK. (See pages 26 and 27.)
• Switch off the TV power.
1m
• Performing any of the three above will activate the V-CHIP BLOCK.
@). 28
On-Screen Display Menu
Input Select
Option Menu
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 3, you may need
to change the input signal type setting from the list
below:
Example
DJ
Option
Auto/COMPONENTNIDEO
mm
AQUOS LINK Setup
Audio Only
Output Select
[Fixed]
Caption Setup
Digital Caption Info.
Program Title Display
[No]
Favorite CH
[Off]
Game Play Time
Operation Lock Out
Demo Mode
0..,...
I,1-'
FREEZE
MENU
I
[Off]
I 00,
EXIT
1
2
3
4
RETURN
I
Press MENU to display the MENU screen, and then
press ~/~ to select "Option".
Press J./T to select a specific adjustment item and
then press ENTER.
Press J;./T (or ~/~) to select the desired setting,
and then press ENTER.
Press MENU to exit.
Skip this step for "Audio Only".
Audio Only
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
mm
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
• If the selected signal type is incorrect, images are not
displayed at all or are displayed without any color.
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 3 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 3 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
INPUT 1 or3:
CD COMPONENT VIDEO
@VIDEO
HDMI Setup
To watch an HOMI or PC-IN equipment image, select
"INPUT 4", "INPUT 5" or "INPUT 6" from "INPUT
SOURCE" menu using INPUT on the remote control
unit or on the TV.
Auto View:
Enable: To use View Mode based on signal
recognition, including an HDMI signal.
Disable: No function.
Audio Select:
Digital: For an audio signal via the HDMI terminal.
Analog: For an audio signal via the R-AUDIO -L
terminal.
mm
• Refer to your external equipment operation manual for the
signal type.
• "Audio Select" is only available for INPUT 6.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
Output Select
Allows you to select what controls the audio output.
Fixed: Sound via speaker is adjusted with VOL + / - on
the remote control unit or VOL + / - on the TV.
Sound via the AUDIO OUTPUT terminal is not
adjustable and outputs at a consistent level.
Variable: Sound via the AUDIO OUTPUT terminal is
adjusted with VOL + / - on the remote control unit or
VOL+/ - on the TV.
Sound via speaker is muted.
Color System
Select the video signal system compatible with your
equipment from the list below:
AutoINTSC/PAL-M/PAL-N
mm
• "Color System" can only be set for the INPUT 1 VIDEO,
INPUT 2 and INPUT 3 VIDEO.
• If you have already set the Secret No., input the 4-digit
secret number here. See page 26 for setting a secret
number.
@- 29
On-Screen Display Menu
Caption Setup
This function allows you to adjust the closed
caption screen appearance to suit your preference.
You can adjust 7 items: "Caption Size", "Font
Style", "Foreground Color", "Foreground Opacity",
"Background Color", "Background Opacity" and
"Character Edge".
Example:
Selectable items available for "Font Style".
Default: The font specified by broadcasting station or
default font.
Type 0: Proportional font used in the MENU screen.
Type 1: Monospaced with serifs.
Type 2: Proportionally spaced with serifs.
Type 3: Monospaced without serifs.
Type 4: Proportionally spaced without serifs.
Type 5: Casual font type.
Type 6: Cursive font type.
Type 7: Small capitals.
1m];)
• For resetting adjustments to the factory preset values,
press J/ij~ to select "Reset", and then press ENTER.
• The default value depends on the broadcasting station.
Digital Caption Info.
(Digital Caption Information)
This function allows viewing of digital closed caption
information for the digital broadcast program being
viewed.
1m];)
• This list is not displayed for analog broadcasts or external
input audio/video.
• This information is not included in CC1, CC2, Text 1, or
Text2, and is not displayed in a list.
Program Title Display
Select the CH display when changing channels for
digital broadcasting.
Yes: "Program Info." displays.
No: "Program Info." does not display.
Favorite CH
(Favorite Channel Setting)
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
Select "Register" and then press ENTER. Press ./~ 1....1
~ to select the position in the category, and then press
ENTER to register.
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press
./~ I .... /~ to select the channel you want to delete, and
then prf;)ss ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".
1m];)
• Before setting the channel, select the channel you want to
register as a favorite channel.
• You can display the "Favorite CH" screen by pressing
FAVORITE on the remote control.
Game Play Time
This function displays the elapsed game time so you
do not lose track of the time. To display the elapsed
time, select "GAME" for the AV MODE before starting
the game.
On: The elapsed time is displayed every 30 minutes when
you switch to GAME mode in external input mode.
Off: No adjustment.
Operation Lock Out
This function locks the operation buttons on the TV
and the remote control.
Off: No adjustment
RC Control Lock: All buttons on the remote control are
locked.
Button Control Lock: All buttons on the TV, except
POWER, are locked.
1m];)
• To unlock the buttons on the remote control, press MENU
on the TV, and then select "Off" on the MENU screen.
• To unlock the buttons on the TV, press MENU on the
remote control, and then select "Off" on the MENU screen.
Demo Mode
You can select the image from 3 types of demo mode.
Mode 1: 120Hz Fine motion advanced with the picture.
Mode 2: 120Hz Fine motion advanced.
Mode 3: AQUaS Net.
1m];)
• This function will be canceled when you press any button
on the remote control unit.
• When the TV is set to Mode 3, pressing FREEZE pausesl
restarts demo.
• If the power is turned off or the AC cord is unplugged when
the TV is in demo mode, the TV will start in demo mode
when it is turned back on.
@- 30
On-Screen Display Menu
Digital Setup Menu
This setting allows you to optimize the settings of
Digital broadcasting.
Example
Software Update
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the TV.
Regarding how to obtain the software update file,
please call1-800-BE-SHARP.
•••
Digital Setup
• ••
o
•
LQj
@>
INPUT FLASHBACK
00
BmmD
• Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
• Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail.
1 Press MENU to display the MENU screen, and then
2
3
4
press .... /~ to select "Digital Setup".
Press Ji./T to select a specific adjustment item,
and then press ENTER.
Press Ji./T (or .... /~) to select the desired setting,
and then press ENTER.
Press MENU to exit.
1 Insert the USB memory device with the update file
into the SERVICE terminal on the TV.
Audio Setup
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
2 Press MENU to display the MENU screen, and
then press .... /~ to select "Digital Setup".
3
Press Ji./T to select "Software Update", and then
press ENTER.
• If you have already set the Secret No., go to step 4.
•
Digital Setup
Identification
The current version of the TV software is displayed.
4
Input the 4-digit secret number by using 0-9.
I • Digital Setup
I
_111---
@- 31
On-Screen Display Menu
5
Press ENTER to start checking the data in the
USB memory device.
7
Press ENTER to start updating.
• The screen becomes dark for a while until the update
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.
6 During the data checking, "Checking" blinks.
Example
• The current version of the TV software and the version
of the update file on the USB memory device are
displayed. To update the TV software with the update
file, select "Yes", and then press ENTER.
• If you accidentally unplugged the AC cord or removed
the USB memory device, reinsert the USB memory
device and plug in the AC cord. The update process is
restarted.
Example
8
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Example
• If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
• If the update has failed, check the file in the USB
memory device and try Software Update again.
Failed to complete update
Retry Software Update
If system Update fatls again,
contact the customer service center
9
After the screen shown below is displayed, press
ENTER.
--System software was
successfully updated
Remove the USB memory device
10
@- 32
Remove the USB memory device.
•
•
Other Viewing Options
Presetting Remote Control Function
You can operate the connected AV products (AV
receiver, cable box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function of your
remote control unit.
goo
TV
,0t/tP
TV
VCR
CBL/SAT OVO
0
0
5
II
II
II
I
To operate the connected equipment, press
FUNCTION to select the LED for your device. (VCR,
AUDIO, CBUSAT (cable converter) or DVD.) The
LED lights up, and the remote control unit button will
function as follows.
• When you operate VCR or DVD, press INPUT to select the
terminal connected to your device.
• CABLE and SAT cannot be selected at the same time.
AUDIO
0
FUNCTION
•
• •
•• •
•
SOURCE
1
2
3
4
Operating the Connected Equipment
LIGHT
rn
•
REC
II
II
II
II
I
I
6
7
8
9
10
SURROUND(J
o -
I
CH
MUTE
0
MENU
2 ......
• Rewinds the tape and allows picture search. (VCR)
• Hold down to go in reverse. (DVD)
• Starts recording. (VCR)
I
11
II
12
III
• Turns the connected equipment power on and off.
3 REC
I
VOL
1 SOURCE POWER
13
14
4~
• Pressing quickly once takes you to the start of the chapter
currently playing. Each time you press it, you move back
to the start of the previous chapter. (DVD)
50-9 (CBUSAT), • (DOT) (SAT)
• Press a button (or buttons) that corresponds to the
channel that you wish to watch.
6~
• Starts playback. (VCR, DVD)
7~~
• Rapidly advances the tape and allows picture search.
(VCR)
• Hold down to fast forward. (DVD)
811
AQuas
Presetting manufacturer codes
1
Press FUNCTION until the LED for your device
lights up.
2 After the LED for your device lights up, press
FUNCTION and DISPLAY at the same time to
enter the code registration mode. The LED will
blink.
3 Press 0-9 to enter the manufacturer code. (See
page 34.)
• Preset mode is finished once the LED no longer lights
up.
4
After registering the code, the LED will stop blinking
then turn off after one second. (If you perform an
incorrect operation, the LED will blink quickly then
turn off.)
9.
• Sets pauses and still pictures. (VCR, DVD)
• Stops the tape transport. (VCR)
• Playback stops when pressed. With some DVD players,
pressing the button twice may open the disc tray. (DVD)
10 ~
• Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the
start of the next chapter. (DVD)
11 FLASHBACK
• Press to switch between the current channel and the
channel you were watching immediately before. Some
manufacturers do not preset FLASHBACK. (CBL)
12 CH/\/V
• Press CHI\. or CHV to tune in to a higher or lower
channel. (CBL)
• Press to select the channel of the TV tuner on the VCR.
(VCR)
13 MENU
• When this button is pressed, the DVD menu will display.
14 .1.I
• ./TI
/~, ENTER
/~: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen. (SAl). Press the
button to select items on the DVD MENU screen. (DVD)
• ENTER: Press to activate the selected function. (SAT,
DVD)
@- 33
Other Viewing Options
Manufacturer codes
VCR BRAND
Akai
Audio
Broksonic
Canon
Capehart
Craig
Curtis Mathis
Daewoo
DBX
Dynatech
Emerson
Fisher
Funai
G.E.
Goldstar
Hitachi
Instant Replay
JC Penney
JVC
Kenwood
L10yds
Magnavox
Magnin
Marantz
Memorex
Minolta
Mitsubishi
Montgomery Ward
Multitech
NEC
Panasonic
Pentax
Philco
Philips
Pioneer
QUASAR
RCA
Realistic
Samsung
Sanyo
Scott
Sears
Sharp
Shintom
Sony
Sound Design
Sylvania
Symphonic
Tatung
Teac
Teknika
Thomas
TMK
Toshiba
Video Concepts
Yamaha
Zenith
@D- 34
REMOTE CONTROL CODE
NUMBER
25,26,37
15,22,30
32
04
34
10,31
04
34
15,22,30
29
21,32,35
09, 10, 11
28,29
04
24
06,47
04
04,06,24,30
15,41,42,53
14,15
29
04,05,08
31
30
04,10,24,29
06
17,18,39,40,48
02,43
29
15,22,30
04,44,45,49,50
05,06
04,06
04,05,08
46
04
06,07,33,51
01,02,10,24
23,31
10,14,52
20
06,11,24
01,02,03
36
12,13,38
29
05,08
29
15
15,29
27,29
29
21
19,20
30
15,29,30
16
DVD/BD/LD BRAND
Denon
JVC
Kenwood
Magnavox
Marantz
Mitsubishi
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sharp
Sony
Toshiba
Yamaha
Zenith
CATV/SAT BRAND
Anvision
Cable Star
Eagle
General Instrument
Jerrold
Magnavox
Motorola
NEC
Oak Sigma
Panasonic
Philips
Pioneer
Randtek
RCA
Scientific Atlanta
Sony
Viewstar
Zenith
REMOTE CONTROL CODE
NUMBER
02
09
21
04
04
06
02,22
04,23
08,11,20
03
03,24
07, 12
01,02,03,10
05,25
04
02
04
REMOTE CONTROL CODE
NUMBER
04,05
04,05
05
02,03,07,12,13,14,
19,22
02,03,07,12,13,14,
22,31,32,33,34,35,
36,37,38,39,40
04,05,09,14,17,18,
20,21,24,25
47
42
8
16,23
04,05,09,15,17,18,
20,21,24,25
08,10,29,30,43*,46
04,05
16,27,44*,45*
01,26
28
04,05,09,15,17,18,
20,21,24,25
06,41
1m
• Numbers marked with * are SAT codes, all others are
CATV codes.
AUDIO BRAND
Sharp
REMOTE CONTROL CODE
NUMBER
01
Using AQUOS LINK
Controlling HOMI Equipment Using AQUOS LINK
What's AQUaS LINK?
• Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUaS LINK you can interactively operate
compatible system equipment (Blue-ray Disc equipment, AVamplifier, DVD).
• By connecting AQUaS LINK-compatible devices with HDMI-certified cables to the TV, you can control a
recorder or AV amplifier using the remote control of the TV.
• AQUaS LINK allows you to operate the HDMI-connected equipment with one remote control.
DIGITAL
AUDIO
OUTPUT
Optical fiber cable
HOMI-certified cable
(commercially available)
(com,.m
...e...
rc:..;ia...;IIY:..;a...
va...i1a
...b...
le.:,.).....(:lP-..;.~ ~
~
~~
IlmIl
l
HOMI-certified cable
(commercially
~
~-illjmm,
=
~
AQUaS BO player
~
~
(:~~~~~~~~~)
Hi:lml
_+0:
AQUaS LINK-compatible
audio system
TV
ImID
•
•
•
•
Point the remote control toward the TV, not to connected HOMI equipment.
Video noise may occur depending on the type of HOMI cable used. Make sure to use an HOMI-certified cable.
Up to 3 pieces of HOMI recording equipment and one AV amplifier can be connected using this system.
These operations affect the HOMI equipment selected as the current input source. If the equipment does not operate, turn on
the equipment and select the appropriate input source using INPUT.
You can operate AQUaS LINK-compatible devices with the remote control
unit when the FUNCTION of the remote control unit is set to TV.
REC STOP and OPTION buttons will function only when AQUaS LINK is
used.
• One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the
image from the HDMI source.
VOL
SURaNol
FREEZE
o
tJ
CH
MUTE
-,
MENU
J
E. q-
•
1'RETURN
••••
••
a
-
FAVORITE CH -
REC STOP OPTION
• One Touch Recording
Press REC while you are viewing a broadcast received with the AQUaS
LINK-compatible recorder. The AQUaS LINK automatically recognizes the
connected HDMI device and starts recording.
• Single remote control
The AQUaS LINK automatically recognizes the connected HDMI device and
you can control the TV and the devices as if using a universal remote control.
FAVORITE
SLEEP AUDIO AV MooE CC
0000
• Control the AQUaS LINK-compatible audio system
Set the volume of AQUaS LINK-compatible audio system.
ImID
• The above description is an example of the AQUaS LINK function.
• The steps in "AQUaS LINK Setup" on page 36 need to be completed beforehand.
• Refer to this operation manual and the operation manual of the AQUaS LINK device to be used with this TV.
@- 35
Using AQUOS LINK
AQUOS LINK Setup
One Touch Recording
This function allows easy one-touch recording of the
program being viewed on the 1V to AQUOS L1NKcompatible equipment with a recording function by
simply pressing REC on the remote control.
LIGHT
SOUACE
1
I
Press MENU to display the MENU screen, and then
press .... f~ to select "Option".
2
Press J;.fT to select "AQUOS LINK Setup", and
then press ENTER.
3
Press J;.fT to select a specific item, and then press
ENTER.
4
Press J;.fT (or ~f~ ) to select the desired setting,
and then press ENTER.
5
Press MENU to exit.
If this is activated, the One Touch Play function is
enabled.
Yes: While the TV is in standby mode, it automatically
turns on and plays back the irnage from the HOMI
source.
No: This function does not work.
~§i!!jtinglJl~~When multiple AQUOS LINK-compatible devices are
connected, this function allows you to set the recorder
for recording when you press REC on the 1V's remote
control unit.
(3
8REC
8
E3 @J
CB 8
0
0
8
0.'"
~
I
-
FAVORITE CH -
0®@@
REC STOP opnON
FAVORITE
.0
0
SLEEP AUDIO AV MOOE CC
0000
Prepare the connected AQUOS LINK-compatible
recorder for recording. Check the following items.
• Make sure that the antenna cable is connected.
• Check that there is sufficient available space on the
recording media (HOD, OVO, etc.).
• an the TV, use "AQUaS LINK Setup" and "Model select" to
select the equipment for recording.
• By default, the recorder connected to INPUT 5 is selected
for recording.
1
Press REC to start recording.
• When you are viewing a broadcast received with the
AQUaS LINK-compatible recorder selected in "Model
select", recording to the AQUaS recorder of the
broadcast being viewed starts.
• When you are viewing a broadcast received with
equipment other than the AQUaS LINK-compatible
recorder selected in "Model select" or other external
input equipment, pressing REC on the remote control
does not start recording.
2
Press REC STOP to stop recording.
One Touch Playback
AQUOS LINK allows you to operate the HDMIconnected equipment with one remote control.
I
Press J;.fT to select the recorder for recording.
Example
LIGHT
@J
•• •
•
tviEW\
\.!22U
Press ~ to start playing back a title.
I
• The last played program is played back. You can use the
following buttons during broadcast viewing.
mm
SOURCE
POWER
Turns the power of the HoMI connected
devices on and off.
Hold down to go in reverse.
Example: when connecting AQUOS LINK-compatible
recorder via AQUOS LINK-compatible Audio
system
Starts playback.
•
II
Hold down to fast forward .
Playback stops.
Sets pauses and still pictures.
Pressing quickly once takes you to the start
of the chapter currently playing. Each time
you press it, you move back to the start of
the previous chapter.
When an AQUaS LINK-compatible audio system
or other equipment is connected between the TV
and recorder, "Sub" is displayed.
@- 36
Pressing quickly once takes you to the start
of the next chapter. Each time you press
it, you move ahead to the start of the next
chapter.
Using AQUaS LINK
Selecting Media Type for CEC-Compatible
Recorder
AQUaS LINK Menu
AQUOS LINK
Recorder EPG
. .
You can switch the media (HDD or DVD) for playback
or recording on the AQUOS LINK-compatible recorder.
1
Top menu/title list
Media change
By AQUOS AUDIO SP
ByAQUOS SP
2 Press
~/T to select "Media change", and then
press ENTER.
3
Sound mode change
CH
(J
SURROUND
o
Select the desired media such as DVD or HOD.
• The Media type toggles each time you press ENTER in
"Media change".
• Select the media to be operated by the player.
Model select
VOL
Press OPTION to display the AQUaS LINK MENU
screen.
v
FREEZE
MUTE
()
MENU
O~O
~
~~:JPRETURN
You can select to listen to the 1V sound only from the
AQUaS LINK-compatible audio system and manually
change its sound mode.
1 Press OPTION to display the AQUOS LINK MENU
screen.
2 Press
REC STOP OPTION
o
~/T to select "By AQUOS AUDIO SP", and
then press ENTER.
FAVORITE
C'I.m
0
CC
0000
• The sound from the IV speaker is muted and only the
sound from the AQUaS LINK-compatible audio system
is audible.
• You can use VOL +/ - and MUTE.
SLEEP AUDIO AVMODE
Timer Recording
You can call up the CEC-compatible recorder's EPG
and preset timer recordings using the 1V's remote
control.
1 Press OPTION to display the AQUaS LINK MENU
screen.
2
3
Select "By AQUOS SP", and then press ENTER to
listen to the 1V sound.
Manually Changing AQUaS AUDia Speaker
System's Sound Mode
Press ~/T to select "Recorder EPG", and then
press ENTER.
1 Press OPTION to display the AQUaS LINK MENU
• The recorder's EPG is displayed.
2
Select the program to record.
• You can use ,.l'f'/ ..... /~, ENTER, RETURN, EXIT and
the coloured buttons.
1m
• Refer to the operation manual of the recorder for details.
Playback of Titles Using AQUaS LINK
screen.
Press ~/T to select "Sound mode change", and
then press ENTER.
• The sound mode changes each time you press ENTER.
• Refer to the operation manual of the AQUaS L1NKcompatible audio system for details.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
This section explains how to play back a title in the
AQUOS BD player.
1 Press OPTION to display the AQUaS LINK MENU
1 Power on the AQUOS BD player, and select
2 Press
appropriate external input.
2 Press OPTION to display the AQUaS LINK MENU
screen.
~/.." to select "Model select", and then
press ENTER. The HDMI device toggles each time
you press ENTER.
screen.
3 Press
~/T to select "Top menu/title list", and then
press ENTER.
4
• The title list data from the connected AQUaS so player
displays.
Select the title with ~/T / .... /~, and then press ~
to start playback.
@-
37
Using the Internet
• By connecting your lV to a broadband system, you can access the Internet from the lV.
• Display the "Sidebar Widget" on the lV screen to check out the latest Internet information and access a range
of useful information for AQUaS users from the original home page*.
* About the original home page
• The original home page is a website set up specifically for AQUaS owners.
• The website is worth visiting as it provides a range of useful information, including tips on using your AQUaS
and a frequently asked questions section.
Internet Setup
• Connecting to the Internet
• To connect your lV to the Internet, you must have a broadband Internet connection.
• Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the lV to your
broadband router (commercially available).
• If you do not have a broadband Internet connection, consult the store where you purchased your lV or ask your
Internet service provider or telephone company.
Internet
ETHERNET cable
(commercially available)
• Checking your Internet connection
'OTFOACK
VOL
CH
SUAROUND(J
o - tJMUTE
0
v
FREEZE
MENU
o~o
I
• Press NET twice or three times to switch to the lV+Web or Web screen. When
the original home page appears, now you are connected to the Internet.
• If you have failed to connect to the Internet in the above operation, then an
error message will appear. In this case, press EXIT to return to the normallY
screen and check the relevant settings (see page 39).
• If you still cannot connect to the Internet, please consult your Internet service
provider or telephone company.
8e8
EXIT e------') RETURN
.~o
• Information on the PLC adapter
The SHARP PLC adapter kit (sold separately) lets you
use the existing electrical wiring in your house to create
a home network.*1
Simply plug the adapters into electrical outlets at the
desired locations, and then connect your computer
and other devices to the adapteres with LAN cables
(two LAN cables are provided).
If you have Broadband Internet service, connect your
router to one of the adapters to allow all your network
devices to access the Internet.
Data can be exchanged at speeds of up to 85 Mbps*2
on your network.
Up to four devices can be connected to the HN-VA400U
adapter.
HN-VA401SU
4 +1
HN-VA400U
4
HN-VA100U
(available March 2008)
(@-
38
*1: PLC does not have router function. To connect
to the Internet via network, Broadband Internet
connection and related devices such as router etc
is required.
*2: The actual communication speed may be affected
by power line conditions, other electrical appliances
and network conditions.
Using the Internet
• If you cannot connect to the Internet
Perform the procedures below to check your 1V's
network settings.
•••
•••••
ev.@>
LQj
'aT '0"
FREEZE
MENU
041flJ__ O
EXIT
..
-
q
P
Displaying the Sidebar Widget
Perform the steps below to display the Sidebar
Widget on the 1V screen and view the latest Internet
information.
CD 0 0
CD ®®
(]) ®®
RETURN
0
FAVORITE CH -
0®@@)
ev CD@>
t
1 Press EXIT to display the normal1V screen.
2 Press MENU to display the MENU screen, and then
press
~/~
to select "Digital Setup".
3
Press .. IT to select "Communication Setup", and
then press ENTER.
4
Press J;..I~ to select "Ethernet Setup", and then
press ENTER.
• Check that numbers are displayed for each setting.
• If there are any settings without numbers, specify the
numbers by following the on-screen instructions.
• For information on how to enter text, see page 40.
5
1
LIj
INPUT FtASHEW::1(
00
FREEZE
MENU
o~o
8-8
rP
EX'T ...,
•
-
RETURN
0
FAVORITE CH -
0®@@)
Press NET repeatedly to display the Sidebar
Widget.
• Each time you press NET, the screen image toggles as
shown below:
Sidebar
Widget "'TV+Web "'Web"'TV
t
,
• When you are not connected to the Internet, a network
function explanation screen is displayed.
The services displayed vary depending on
circumstances.
2
Press MENU to exit.
Press .. IT to select a title, and then press
ENTER.
• The web page for the selected title is displayed.
• The service details vary depending on circumstances.
1 Repeat steps 1 to 3 in Ethernet Setup.
2 Press .. IT to select "Zip Code", and then press
3
4
ENTER. After "Change" is highlighted, press
ENTER again.
Press ~/~ to select "US/Mexico" or "Canada",
and then press ENTER.
Enter your zip code.
• The U.S. and Mexico use 5-digit zip codes. Canada
uses 6-digit codes.
• For the U.S and Mexico, use 0-9 on the remote control
unit to enter your zip code. For Canada, use the
software keyboard.
5
6
After "Complete" is highlighted, press ENTER.
Press MENU to exit.
Interactive Service
If you do not want other people to connect to the
Internet in your absence, you can make settings to
keep the 1V away from the Internet.
1 Press MENU to display the MENU screen, and then
press ~/~ to select "Digital Setup".
3
Press EXIT to return to the normal1V screen.
ED
• If you start up the Sidebar Widget while a Closed Caption
is displayed, the Closed Caption is automatically hidden.
• Web page appearances may differ depending on the type
of screen (TV+Web or Web).
• When a still image is displayed, the Sidebar Widget does
not appear even if you press NET.
2 Press .. /~ to select "Interactive Service", and then
press ENTER.
• Input the 4-digit secret number by using 0-9.
3
Press ~/~ to select "No", and then press ENTER.
• If you want to allow Internet connection, select "Yes",
and then press ENTER.
4
Press MENU to exit.
(®- 39
Using the Internet
Entering Text (Software Keyboard)
When you are editing an input screen or specifying the
Ethernet settings used for accessing the Internet, enter
text from the software keyboard.
ImD
Caps Off/Caps On/Caps Lock
If "alphabet" is selected in "Character Set", this switches
characters between uppercase and lowercase.
Each time you press ENTER, the character type switches as
shown below:
Caps Off: all the characters are lowercased
Caps On: only the first character is uppercased
Caps Lock: all the characters are uppercased
• You can enter up to 128 characters for text.
The text you enter is displayed as you type it in.
To move the cursor (the current input position), use
'·M M" or "K M" on the software keyboard.
Press ..... /~ to select the type of characters entered:
alphabet, number or sign.
(The selectable types depend on the input source.)
Done
Applies the entered information and closes the software
keyboard.
Quit
Closes the software keyboard without applying the entered
information.
• You can also close the software keyboard by pressing
EXIT on the remote control unit.
CI
Displays the icon" ..,J ", indicating that a new line has been
inserted.
Clear
Erases the character string.
• When the cursor is somewhere in a line: the character
string to the right of the cursor will be erased.
• When the cursor is at the right end of a line: the entire line
will be erased.
Delete
If the cursor is at the right end of a line, this erases text one
character at a time.
• You can also delete text by pressing RETURN on the
remote control unit.
While you are entering text, likely input conversion candidates
are displayed based on what you typed in.
• You can also enter text by pressing A, B or C on the remote
control unit.
i--I
"
goo
0
FUNCTION
•
SOURCE
LIGHT
T
TV
~~F
AUDIO
'CR
CBLJ$AT DVD
o
0
0
<3 8
®
8REG
(3
G
I
GD
El @
,,~
••
•
•• ••
•• •
Lm
0
When the focus is in an input box. this moves the cursor in the input box to the left.
@>
INPUT FLASHBACK
0 0
VOL
SURRou,,(J
o -
CH
(J
ENTER
MUTE
0
v
,-••••
FREEZE
EXIT ~RETUAN
6)
-
@-40
EXIT
MENU
O~O
6)
FAVORITE CH -
Moves the focus down. When the focus is at the bottom edge, this moves the
focus to the opposite edge (top edge).
Moves the focus left. When the focus is at the left edge, this moves the focus to
the opposite edge (right edge).
When the focus is on "Character Set", this selects the character type (moving
backwards).
m m
8)
Moves the focus up. When the focus is at the top edge. this moves the focus to
the opposite edge (bottom edge).
RETURN
0-9
A (red)
B (green)
C(blue)
D(yellow)
Moves the focus right. When the focus is at the right edge. this moves the focus to
the opposite edge (left edge).
When the focus is on "Character Set", this selects the character type (moving
forwards).
When the focus is in an input box, this moves the cursor in the input box to the
right.
Performs the processing for the button currently in the focus.
Closes the software keyboard without applying the original input elements for the
entered text.
Erases the text in the input box where the cursor is currently located.
When the cursor is at the end of a sentence, this acts as a backspace.
Directly enters the single-byte number for that button.
Directly enters prediction candidate 1.
Directly enters prediction candidate 2.
Directly enters prediction candidate 3.
Enters a space.
Using the Internet
Using the Browser
CD CD
@ CD
(f) CD
0 ®
L;j
0
I
CD
,-,
FREEZE
CD
CD
E.~R.RN
@>
INPUT FLASHBACK
ENTER,
./~ /
MENU
0,...0
-
0
FAVORITE CH -
0®@@
/~
• Press ./~ / /~ to select a link that you want
to jump, and then press ENTER.
EXIT
About links
• Web pages on the Internet often include "links" that
allow you to jump to other web pages (or sites).
• "Links" can take various forms, including words
or images, but they always work in the same way
letting you jump to the link destination when you
select them.
• Selected items (such as links of text input fields) are
enclosed in a yellow frame.
• You can jump from a "link" to the corresponding link
destination.
• Press the button to return to the TV screen.
RETURN
• Press the button to return to the previous page.
Example: The image shown below, which is only
for explanation, is subject to change.
Et!imD
• If the power is cut due to a power failure or the TV being
unplugged while you are using the Internet, information
such as bookmarks or cookies may not be saved correctly.
ED
When a security notification window is displayed:
• Press ENTER to close the window.
• This window appears when you visit a web page that has
security protection, or when you move from a protected
page to an unprotected page.
• In "Security Settings" you can set whether or not this
window is displayed. (See page 44.)
When a cookie confirmation window appears:
Choose whether or not to accept the cookie (see page 44),
and then press ENTER.
• In "Cookies" settings you can set whether or not this
window is displayed. You can also opt to delete all the
cookies at once. (See page 44.)
Tab
Pages with security protection are
clearly shown as such.
If content on a page is continued on another page,
directions to that page are shown clearly.
You can use ./~ / ..../~ to go to the continuation of a
page.
• Where there is link text or a link image in the
direction pressed, the text or image is selected first.
If this happens, press the same direction button
several times.
To users who access the Internet from a PC
• When you access the Internet from this N, the
procedures may not be the same as regular
browser-based access on a PC.
• You cannot download files.
• You cannot view a history of the pages you have
visited.
• You cannot change the startup page displayed
when you press NET.
• Pop-up windows appear in separate tabs.
• On some pages, video and audio cannot be
played, and text or images may not be displayed
correctly.
ED
When "IZ]" is displayed in a page:
• The page failed to load successfully, or it contains images
with formats that cannot be displayed on the TV. Try
reloading the page by selecting"
(see page 42) in the
toolbar.
t>"
(@- 41
Using the Internet
Using the Toolbar
Using Tabs
You can use the toolbar to control the browser and to
specify settings.
I
\
TV
TV
VCR
CB~/SAT D~D
(;)
IV
0
AUDIO
0
0
SOURCE
I
FUNg,.lQN
LIGHT
88m
BREC G El
000
8
8) @ID
CD CD
CD CD
®®
®®
INPUT flASHBACK
00
SU,,"OON{)
FREEZE
MENU
'-I
••••
~
0
FAVORITE CH -
1 Press 0 on the remote control unit to display the
toolbar.
~/~ to select a function, and then press
ENTER.
litSifected ~. I~,. ",'
n
n
@-
42
"-1;~
, .
:c~~-~·~,.'
'" .~•
:¥1.~..
,~~. ,~,' . ...i.
Displays the linked page in a new tab.
Displays the Tab menu.
L
Returns to the previous page.
~
Goes back to the original page when you
have viewed the previous page.
b
Refreshes the page.
Interrupts a page while it is loading.
Q
Select this to open a bookmark.
~
~
=-
Adds the current page to your bookmarks.
"
• You can also display the Tab menu by clicking
the toolbar.
".~8.1~
!l' . j " .
j
..
un" in
~
Select This
Displays the web page in the
selected tab.
Close This Tab
Closes the selected tab.
• You can also press C on the
remote control unit to close a
tab.
Close Other Tabs
Closes the other (unselected) tabs.
Create New Tab
Creates a new tab.
• You can also press A on the
remote control unit to create a
tab.
MUTE
4 0
$
o
2 Press
Tab menu.
v
EXIT . . . . _ _ - - . RETUAN
-
1 Press B on the remote control unit to display the
'ftJ (JC: 0
o (d
o
You can use tabs to view up to 3 web pages at the
same time. Each page appears in a separate tab, and
you can switch between the tabs.
Displays the original home page.
Displays the Browser menu.
2 Press ~/~ to select a tab.
3 Press .,/T to select the item you want to use, and
then press ENTER.
Using the Internet
Saving the URL of the Current Page
Adding a web page to your bookmarks allows you to
return to that page later by simply selecting it from your
list of bookmarks.
Editing Bookmarks
You can rearrange or delete the bookmarks.
• Switching between the URL and title name
1
Press D on the remote control unit to display the
toolbar.
2 Press ~/~ to select "0" in the toolbar, and then
press ENTER.
• Your bookmarks list is displayed.
3 Press
./~ to select the title you want to edit from
the bookmarks list, and then press A on the remote
control unit.
CD CD
CD CD
• The Bookmarks menu appears.
4
CD CD
CD@
INPUT FLASHBACK
00
SURROUND
VOL
CH
j+)
A
MUTE
aU &I a
a
a
FREEZE
-,
• Rearranging displayed items
1
a
press ENTER.
MENU
• Your bookmarks list is displayed.
3
FAVORITE CH -
a
• 0@.
1
2
Display the page that you want to bookmark.
Press D on the remote control unit to display the
toolbar.
3
Press ~/~ to select "~" in the toolbar, and then
press ENTER.
4
Select "Yes", and then press ENTER.
• The page is added to your bookmarks.
1 Press D on the remote control unit to display the
toolbar.
4
• Your bookmarks list is displayed.
Press ./~ / ~/~ to select the page you want to
access, and then press ENTER.
• The selected page is displayed.
• If you have bookmarked 11 or more web pages, press
to scroll through your bookmarks list.
.1.
Press ./T to select "Move Up" or "Move Down".
and then press ENTER.
• Deleting bookmarks
1 Press D on the remote control unit to display the
toolbar.
2 Press ~/~ to select "0" in the toolbar, and then
press ENTER.
• Your bookmarks list is displayed.
3
2 Press ~/~ to select "0" in the toolbar, and then
press ENTER.
Press ./~ to select the title you want to display
in a different position from the bookmarks list, and
then press A on the remote control unit.
• The Bookmarks menu appears.
Opening a Bookmarked Page
3
Press D on the remote control unit to display the
toolbar.
2 Press ~/~ to select "0" in the toolbar, and then
EXIT ~AETURN
-
Select "Display by Address" or "Display by Title" in
the Bookmarks menu, and then press ENTER.
Press ./~ to select the title you want to delete,
and then press A on the remote control unit.
• The Bookmarks menu appears.
4
Press ./~ to select "Delete". and then press
ENTER.
• To delete all the bookmarks. select "Delete All".
5
Press ..... /~ to select "Yes", and then press
ENTER.
To open a bookmark in a new tab:
• Press A instead of ENTER. Select "Open in New Tab".
and then press ENTER.
@- 43
Using the Internet
Browser Settings
You can check or modify your browser settings from
the Browser menu.
The Browser menu includes a display settings menu
and a security settings menu.
FREEZE
o
MENU
0
_1IIIIlB'RETURN
o
-
FAVORITE CH -
®@.
I
1
2
Press 0 to display the toolbar.
3
Press .... /~ to select the settings menu you want to
access.
4
Press J;.IT to select and confirm the item you want
to set.
S
Press J;.IT I .... /~ to specify the required setting,
and then press ENTER.
Press .... /~ to select "~" in the toolbar, and then
press ENTER.
6 Press 0 to exit.
W
" D W " ; ' ! : , .'
Zoom In/Out:
Zoom in: Displays content enlarged to 200%.
Normal: Displays content at 100%.
Zoom out: Displays content reduced to 75%.
Encoding: Selects the desired encoding from the list below:
Western (ISO-8859-1)/Unicode (UTF-8)
Page Information: Displays information about the currently
displayed page.
Reset:
Yes: Resets the browser settings.
No: Does not reset the browser settings.
1m
• "Reset" does not reset the certification enable/disable and
Encoding settings.
@·44
Security:
Save Setting: If you select this option, a message is
displayed when you move from a protected page to an
unprotected page.
To change this setting, remove the tick, select "Save
Setting" and then press ENTER.
Root Certificates/CA Certificates: Displays the list of
certificates. To disable a certificate, select the certificate
to be disabled and press A to display the sub,menu.
Select "Disable", and then press ENTER.
• Disabled certificates are shown unticked in the
certificate list screen.
Cookies:
Accept all: Select this option to accept all cookies.
Reject all: Select this option when you do not want to
accept cookies.
Prompt before accepting: When you open a page
that uses cookies, this option displays a confirmation
message.
Delete All Cookies: Deletes all your cookies.
Server Certificates: Displays certificates for the connected
server.
Browser Information: Displays browser information.
• This product contains NetFront Browser of
ACCESS CO., LTD.
• ACCESS and NetFront are trademarks or
registered trademarks of ACCESS CO., LTD.
in Japan and other countries.
© 2007 ACCESS CO., LTD. All rights
reserved.
• This software is based in part on the work of
the Independent JPEG Group.
•••
AC<!ESS™
NetFront™
Appendix
Removing the Stand
• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
B!iiD
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• LC-46SE94U/LC-52SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the 1V.
• Before performing work spread cushioning over the base area to lay the 1V on. This will prevent it from being
damaged.
2
1
3
Hex key
Unfasten the four screws used to
secure the stand in place.
Detach the stand from the 1V.
(Hold the stand so it will not drop
from the edge of the base area.)
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the 1V, and press
until they lock into place.)
ImID
• To attach the stand, perform the above steps in reverse order.
• LC-65SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the 1V.
1
Unfasten the four screws used to
secure the stand in place.
2
Detach the stand from the 1V.
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the 1V, and press
until they lock into place.)
ImID
• To attach the stand, perform the above steps in reverse order.
@-45
Appendix
Setting the TV on the Wall
mmm
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-46SE94U1
LC-52SE94U) or AN-65AG1 (SHARP) (for LC-65SE94U). The use of other wall mount brackets may result in an
unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves, SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service professional about using an optional AN-52AG4 or AN-65AG1 bracket to mount the
TV on the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4 or AN-65AG1 wall mount bracket.
(See the bracket instructions for details.)
About setting the TV angle
AN-52AG4
0"/5"/10'/15'/20"
LC-46SE94U
• The center of the display:
6 3/ 4 inch (174.25 mm)
under the "A" position.
LC-52SE94U
• The center of the display:
5 1/4 inch (136.1 mm) under
the "A" position.
Vertical mounting
• Refer to the operation
manual of AN-52AG4 for
details.
LC-46SE94U
LC-52SE94U
AN-65AG1
• The "A" position is at the
center of the display.
Refer to the operation
manual of AN-65AG1 for
details.
Angular mounting
LC-65SE94U
ED
• Detach the cable clamp on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
@- 46
Appendix
Troubleshooting
Possible Solution
Problem
• No power
• Check if you pressed TV POWER on the remote control unit. (See page 15.) If the
indicator on the TV does not light up, press POWER on the TV.
• Is the AC cord disconnected? (See page 7.)
• Has the power been turned on? (See page 15.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper operation.
In this case, operate the unit after first turning off the power of the TV or unplugging
the AC cord and replugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
•
•
•
•
•
• Picture is cut off/with sidebar
screen.
• Is the image position correct? (See page 26.)
• Are screen mode adjustments such as picture size made correctly? (See page 19.)
• Strange color, light color, or color
misalignment
• Adjust the picture tone. (See pages 22 and 23.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting. (See page 25.)
• Power is suddenly turned off.
• Is the sleep timer set? (See page 16.)
• Check the power control settings. (See page 24.)
• The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
• No picture
•
•
•
•
•
•
• No sound
• Is the volume too low? (See page 16.)
• Is "Variable" selected in "Output Select"? (See page 29.)
• Have you pressed MUTE on the remote control unit? (See page 16.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
• The original home page cannot
be displayed.
• Is the ETHERNET cable connected correctly? (See page 38.)
• Check the settings of "Communication Setup" and "Interactive SeNice". (See page 39.)
• Some Internet functions used on
a PC are not available from the
TV.
• The TV has only limited functions compared with regular PC browsers (See page 41 .)
Is the FUNCTION set correctly? Set it to the TV setting position.
Are batteries inserted with polarity ( +, -) aligned? (See page 8.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated near the remote control sensor?
Is connection to other components correct? (See pages 13 and 14.)
Is correct input signal source selected after connection? (See page 29.)
Is the correct input selected? (See page 29.)
Is picture adjustment correct? (See pages 22 and 23.)
Is "On" selected in "Audio Only"? (See page 29.)
Is a non-compatible signal being input? (See page 50.)
Troubleshooting-Digital Broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
Error code
Possible Solution
• Failed to receive broadcast.
E202
• Check the antenna cable. Check that the antenna is correctly
setup.
• No broadcast now.
E203
• Check the broadcast time in the program guide.
@-47
Appendix
RS-232C Port Specifications
• pc control of the TV
• Command format
• Attach an RS-232C cable cross-type (commercially
available) to the supplied Din/D-Sub RS-232C for the
connections.
Eight ASCII codes
1m
• This operation system should be used by a person who is
Command 4-digits
+
CR
/~
7
Parameter 4-digits
Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0-9, x, blank, ?
accustomed to using computers.
• Communication conditions
• Parameter
Set the RS-232C communication settings on the PC to
match the lV's communication conditions.
The lV's communication settings are as follows:
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that 4 values are
input for the parameter.)
When the input parameter is not within an adjustable
range, "ERR" returns. (Refer to "Response code format".)
Any numerical value can replace the "x" on the table.
9,600 bps
8 bits
None
1 bit
None
When "?" is input for some
commands, the
present setting
value responds.
• Communication procedure
Send the control commands from the PC via the RS232C connector.
The lV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
• Response code format
Normal response
~
~
~
Return code (ODH)
Problem response (communication
error or incorrect command)
~
~ Return code
(ODH)
• Command table
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
COMMAND PARAMETER
CONTROL CONTENTS
:.w l-'0l'-:.:-=-;:.·~-'"7·~_+Oo=FN-,-F---------------t:Th:"e"-,p=,o",w",er-:o",n-,,co",m""m",a",nd><-r",e"""ec",ted""-,-.
-------------1
The Power On command accepted.
POWER ON COMMAND SETTING
R:. S :. P
POWER SETTING
P ,0 'W:. R f-'0c.;'-=-c;.:-=-.;.'.:._+.P,;:.0.:..cw"'er-::0.:..cff
INPUT SELECTION A TOGGLE
I ~ T ~G ~D
1:
,
x,
. _
1V
I ,T ,V : DO, _ .
INPUTl-7
I, A, V: D
.
r.:lt,.::Sh-'-iff.:::s~to:...:s:.::ta::..:nc::.:b"'y.'------------------1
Power On
Power On
(Tooole)
It input-switches by the tooole.
mis the same as an input chanqe key)
It input-switches to 1V. (A channel remains as n is. (Last memory))
"
Input terminal number (1-7)
It input-switches to INPUTl-INPUT7.
INPUT SELECnON B f"IN-,,;PU:,,:::-T-:::-1_+-,-1+-:~N ±~P::-:>-:I+--i-'~_+'=-i-'_=+:0:...::A",U:o;T",O,--.1::..:::,:VI=,DEo:0O'-.-':'2:..:;C:;:Oc;:M""PO~N,::E:"N=_T---_1 An input change is also included.
INPUT 3
I ,N, P , 3
0: AUTO. 1: VIDEO. 2: COMPONENT
A , V ,M ~ D
AV MODE SELECTION
_ : _ : _ 0: (Toggle), 1: STANDARD, 2: MDVIE. 3: GAME, 4: USER.
5: DYNAMIC(FlXed}. 6: DYNAMIC, 7: PC, 8: xvYCC
Volume (0-60)
VOLUME
POSITION
+ - - - - - - - - - - - - - - - - - 1 The screen position variable ranges depend on the View Mode or the
°,
f'-H:..;-P,.:O::;:S",IT:;:IO:...:N+-:-H-..:'P=--+,'O,...'...,S,+-'-+'-,-'-+'-,-'+-=-_
S
V-POSITION V: P :
CLOCK
PHASE
VIEWMODE
signal type. The ranges can be seen on the position-setting screen.
C,L :C,K
Only PC mode. ((}-t 80)
P,H,S,E
Only PC mode. (0-40)
WID
0: (Toggle) IAV], 1: Side Bar IAV], 2: S.Stretch IAV]
3: Zoom [AV], 4: Stretch IAV], 5: Normal [PC]
6: Zoom [PCI, 7: Stretch IPCI.
8: Dot by Dot [PC] [AV], g: Full Screen [AV]
E
MUTE
A,C,S,U
AUDIO SELECTION
. _. _. _ 0: (Toggle). 1: On. 3: Off
x::
SLEEP TIMER
DIRECT
CHANNEL
(ANALOG)
DIRECT
CHANNEL
(DIGITAL)
I(TOQole)
, : ,
:- :- :-
0: OFF, 1: OFF TIMER - 30 MIN., 2: OFF nMER - 60 MIN.,
3: OFF TIMER - 90 MIN.. 4: OFF nMER - 120 MIN.
..
The channel number of 1\1
(1-135)
0100-9999
. . • . • ,_ (1-999)
o ,C , 2
An input change is included if it is not 1\1 display.
In Air, 2-69ch is effective.
In Cable, 1-135ch is effective.
DIGITAL Air wo-Part numbers, 2-dl It olus 2-di it
DIGITAL Cable (Two-Part numbers. 3-digit plus 3-digit)
Front half of DIGITAL CABLE CHANNEL NO. (Desionate rna'or channel)
,L
(O-ggg)
DIGITAL Cable (Two-Part numbers. 3-digit plus 3-digit)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
(O-ggoo)
DIGITAL Cable lOne-Part numbers, 5-di it, less than 10000\
DIGITAL Gable One-Part numbers, 5-dioit, more than 10.000\
...
D:C: 1:0
...
0-6383
CC
0: Although it can choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 8: Only available when 4:3 signal is being input.
8: [PC] Available except when UXGA is being input.
[AV] Only available when l080Vp is being input.
g: Only available when 720p is being input.
0: (Toggle). 1: On. 2: Oft
SURROUND
CHANNEL
Although it can choose now, it is toggle operation in inside.
,w
x,
The channel number of TV +1
The channel number of TV -1
C,L,C,P
x:
(Toggle)
CHUP
C,H,U,P
CHOOWN
C ,H ,D
._._.
If it is ncl1V display, it will input-swnch to 1V. (same function as CHI\)
If n is ncl1V disolav, it will input-swnch to 1V. (same function as CHV)
Toggle operation of a closed caption.
1m
• If an underbar (J appears in the parameter column, enter a space,
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• Any numerical value can replace the "x" on the table.
@-48
Appendix
Specifications
Model: LC-46SE94U
Model: LC-52SE94U
46" screen size class
Advanced Super View &
BLACK TFT LCD
(Diagonal Measurement: 45 6%: )
52" screen size class
Advanced Super View &
BLACK TFT LCD
(Diagonal Measurement: 52 '/32" )
Item
LCD panel
2,073,600 pixels (1 ,920
Resolution
TV-standard (CCIR)
Receiving
Channel
TV
Function
x
VHF 2-13ch, UHF 14-69ch
CATV
1-135ch (non-scrambled channel only)
Digital Terrestrial
Broadcast (8VSBI
2-69ch
Digital cable"
(64/256 QAM)
1-135ch (non-scrambled channel only)
BTSC System
Backlight
60,000 hours (at Backlight Standard position)
15W
Terminals
x
2
INPUT 1
AV in, COMPONENT in
INPUT 2
AV in, S-VIDEO in
INPUT 5
HDMI in with HDCP
INPUT 6
Audio in, HDMI in with HDCP
INPUT 7
15-pin mini D-sub female connector, Audio in (0 3.5 mm jack)
ANT/CABLE
75 Q Unbalance, F Type
DIGITAL AUDIO OUTPUT
Optical Digital audio output
OUTPUT
Audio out
RS-232C
9-pin D-sub male connector
Side
33
/ 6.")
1,080)
Audio out
Rear
65" screen size class
Advanced Super View &
BLACK TFT LCD
(Diagonal Measurement: 64
American TV Standard ATSC/NTSC System
VHF/UHF
Audio multiplex
Model: LC-65SE94U
ETHERNET
Network connector
INPUT 3
AV in, COMPONENT in
INPUT 4
HDMI in with HDCP
SERVICE
Software update
x
1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
x
1 (PCM/Dolby Digital)
OSD language
English/French/Spanish
Power Requirement
AC 120 V, 60 Hz (FOR NORTH AMERICA)
AC 110-240 V, 50/60 Hz (FOR OTHERS)
Power Consumption
270W
(0.6 W Standby with AC 120 V)
302W
(0.6 W Standby with AC 120 V)
TV + stand + speaker
67.2 Ibs./30.5 kg
78.3 Ibs./35.5 kg
129.0 Ibs./58.5kg
TV + stand
62.8 Ibs./28.5 kg
73.9 Ibs./33.5 kg
123.5 Ibs./56.0 kg
TV + speaker
58.4 Ibs./26.5kg
69.4 Ibs./31.5 kg
117.9Ibs./53.5kg
TV only
54.0 Ibs./24.5 kg
65.0 Ibs./29.5 kg
112.4 Ibs./51.0 kg
TV + stand + speaker
43
43/6'
x
30
25/6'
x
13
'/2
48
29/32
x
33
25/6'
x
13
'/2
60
25
/6' X
40
3/32
TV + stand
43
4
%4
x
30
25
x
13
'h
48
2
%2
x
33
25
/6'
x
13
'h
60
25
/6'
40
%2
TV + speaker
43
43/6'
x
28
5/'6
48
2
%2
x
31
5/'6
60
25/6'
x
x
37
x 16 '/64
49/6' x 3 61/6'
43
43
/6'
48
2
%2
x
29
'/<x
60
25/6'
x
35
3/4
Weight
2
Dimension'
(W x H x D)
(inches)
TV only
Operating temperature
x
26
/6'
"/6'
x
x
3
3
'h
'h
x
3
3
'/2
'h
525W
(0.4 W Standby with AC 120 V)
x
x
3
16
7/6'
61/6'
+ 32°F to + 104°F (O°C to + 40°C)
Emergency alert messages via Cable are unreceivable.
The dimensional drawings are shown on the inside back cover.
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
'1
'2
Optional Accessory
The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
Wall mount bracket
AN-65AG1
(for LC-65SE94U)
AN-52AG4
(for LC-46SE94U/LC-52SE94U)
@-49
CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the following procedure.
1
Press MENU to display the MENU screen, and then press ..../~ to select "Setup".
2
Press ~/'f to select "EZ Setup", "CH Setup", "Parental CTRL", "Reset", "Color System" or "Software
Update", and the Secret number input screen displays.
3
Press and hold both CH/\ and VOL+ on the 1V simultaneously until the message appears on the screen.
The secret number is
ED
• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
PC Compatibility Chart
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 25 to set PC input signals.
PC
Resolution
720 x 400
Horizontal Frequency
Vertical Frequency
VESA Standard
31.5 kHz
70 Hz
--
31.5 kHz
VGA
37.9 kHz
640 x 480
37.5 kHz
35.1 kHz
37.9 kHz
SVGA
800 x 600
48.1 kHz
PC
46.9 kHz
48.4 kHz
XGA
1024 x 768
56.5 kHz
60.0 kHz
WXGA
1360 x 768
47.7 kHz
SXGA
1280 x 1024
64.0 kHz
SXGA+
1400 x 1050
64.0 kHz
1600 x 1200
75.0 kHz
UXGA
*These 4 formats are not supported by the analog RGB terminal.
60
72
75
56
60
72
75
60
70
75
60
60
60
60
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
0
0
0
0
0
0
0
0
0
0
0
0
0
0
*
*
*
*
DOC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: - 4OF to + 140°F ( - 20°C to + 60°C)
®D- 50
Appendix
Information on the Software License for This Product
• Software composition
The software included in this product is comprised of various software components whose individual copyrights
are held by SHARP or by third parties.
• Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included with this product that
were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international
treaties, and other relevant laws. This product also makes use of freely distributed software and software
components whose copyrights are held by third parties. These include software components covered by a GNU
General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license
agreement.
• Obtaining source code
Some of the open source software licensors require the distributor to provide the source code with the executable
software components. GPL and LGPL include similar requirements. For information on obtaining the source code
for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the
following website:
http://www.sharpusa.com/gpl
We are unable to answer any questions about the source code for the open source software. The source code for
the software components whose copyrights are held by SHARP is not distributed.
• Acknowledgements
The following open source software components are included in this product:
• linux kernel
• busybox
• uClibc
• zlib
• libpng
• libjpeg
• libiconv
• DirectFB
• OpenSSL
• XMLRPC-EPI
• Software Copyrights
XMLRPC-EPI
Copyright 2000 © Epinions, Inc.
libjpeg
This software is copyright © 1991-1998, Thomas G. Lane.
Portions of this software are based in part on the work of the Independent JPEG Group.
OpenSSL
Copyright © 1998-2001 The OpenSSL Project.
This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. (http://www.openssl. org)
SSLeay
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com)
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
@- 51
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or
customer assistance, please call1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the
"Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the
purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may
vary. Please contact 1-888-GO-SHARP for further information.
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of
purchase to the servicer, which proof must include the date of purchase.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.
Model Specific Section
Your Product Model Number & Description:
LC-46SE94U/LC-52SE94U/LC-65SE94U LCD Color Television
(Be sure to have this information available when you need service for your
Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Exclusions from
Warranty Coverage (if any):
In order for the Product to be serviced, the Product must be readily available
to the servicer, free and clear of any complex or non-standard installation,
mounting or other encumbrance which would unreasonably interfere with
servicing the Product. The Servicer will remount the Product after service,
provided that such remounting is not into a complex or non-standard installation. Any additional labor and materials required to remove and/or reinstall a
Product above and beyond the foregoing are not covered by this warranty,
may result in additional charges and are the responsibility of the consumer.
Image Retention resulting from a fixed image being displayed for long
periods of time is not covered by this Limited Warranty (see Operation
Manual on how to prevent this).
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States. To find the
location of the nearest Sharp Authorized Servicer, please call Sharp toll free
at 1-BOO-BE-SHARP.
What to do to Obtain Service:
Contact your Sharp Authorized Servicer to obtain in home service for this
product. The Servicer will come to your location and if necessary remove the
unit for repair at the Servicer's facility and return the set to you once
completed. Be sure to have Proof of Purchase available.
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP
OR VISIT www.sharpusa.com
@- 52
VALID IN CANADA ONLY
SHARR-----LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called "Sharp") gives the following express warranty to the first consumer purchaser for this
Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such
defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner's manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp's Authorized Service Centres
or Sharp's Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid
spillage.
(g) Any product received without appropriate model, serial number and CSNcUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp's discretion on any Sharp television with the
screen size of 27" or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a
defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise.
WARRANTY PERIODS:
Audio Product
Camcorder
DVD Product
Projector
LCD TV
Microwave Oven
Air Purifier
Portable Air Conditioner
Parts & Labour (exceptions noted)
1 year
1 year
1 year
1 year (lamp 90 days)
1 year
1 year (magnetron component-4 additional years)
1 year
1 year
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer. please contact:
SHARP ELECTRO ICS OF CANADA LTD. 335 Britannia Road East, Mississauga. Ontario L4Z 1W9
....0
eE THE 1I~.s,.
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, please call (905) 568-7140
Visit our Web site: www.sharp.ca
Revision 12/16/05
<00- 53
NOTE
Dimensional Drawings
Unit: inch (mm)
LC-46SE94U
43
I'
43 / 64
I
r::-
({)
N m
.... !£I"v
t::::t::::~
"'
"'
00
"'"" "
C\J
v
~
0
(11 09)
'I
,
!11------'--'-----1-,
40 19/64 (1023.4) I
---+----11
I
--------1--------
r--
[~ ~l
-
I
(()
i
C\J
I.
I
C')
18 25132(477)
,I
3 112
5 3/ 64
(128)
15 3/ 4(400)
9
(89)
0o
::t.
~
(')
....LO
-13 112(343)-'
LC-52SE94U
I'
48 29132 (1242)
,
45 9/16(1157)
I
I
1
---------1-------,
I,
I
15 3/ 4(400)
co
,....
d
b
I.
18 25132(477)
5 3/ 64
3 112
(128)
(89)
0o
::t.
~
(')
....
LO
;1
!'
.1
2
~
1')
Dimensional Drawings
Unit: inch (mm)
LC-65SE94U
60
I'
0)
0
~
'LC)
"'
~ ~
v -.:!
S!i
r---
56
29/64
I
i
(1433.5)
i
~
00-
LC)
(1534)
I
I
00.o
.-
25/64
--r
-
-
-
--
-
-- -
I
-, -
-
,
-
--..:::::::
I,
I
i
I
C')
C')
!
-----
LC)
<0
0
<D
,
~
-.:!
<D
.!:Q..
iI
.'"'
(
-
i
313/16 (792)
N
..s:2
en
C')
N
N
..0...-
I
0)
LC)
17
IjLO
N
21/64
j,
-
r----
<D
~
N
.-
LC)
N
i~
LrJ.-h
5 63/ 64
3 61 / 64
(152)
(100)
--
I,
I
I
~
-.::::
(440)
l~-:---\--
$
0Ilr-'
-i
i'
-1 - - r --.J1.ri. ~
o·
...-'I
,
I
'0
--.
,iJ.
I
T
16
7/ 64
(409)1
I
SHARR
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Printed in Mexico
Imprime au Mexique
Impreso en Mexico
TINS-D476WJZZ
08P01-MX-NM
Dear Valued Customer,
Congratulations on your recent purchase! Thank you for selecting
SHARp® as your LCD-TV provider. We are truly excited that you
have chosen one of our premier AQUOS televisions and are proud
to welcome you to our AQUOS Advantage'" program. Our goal is
simple - to provide you with a premium level of service and support
for your new AQUOS LCD-TV.
As you know, Sharp AQUOS LCD televisions are acclaimed for their
stunning image clarity and sleek, stylish designs. To ensure that your
new AQUOS television provides a brilliant, high-definition viewing
experience, we are committed to delivering a truly superior support
experience that includes direct access to our dedicated AQUOS
Advantage Advisors, online information tools, priority repair services,
and many other unique benefits.
Activate your membership today, and the AQUOS Advantage Team
will take care of the rest. Once again, congratulations, and we look
forward to welcoming you into this exclusive membership program.
Sincerely,
~T.sc~e!4
Senior Vice President, Services and Solutions Group
Sharp Electronics Corporation
BENEFI1S
Receive a Free Three-Month Limited Warranty Extension With Your Activation!
..
As an owner of a qualified AQUOS
>
• Next-business-day service
model, simply activating your
-,
scheduling
membership allows you to immediately
•
•
,-,
.. .
• •
,
service visits
benefits at no additional charge.
• Complimentary loaner if your TV
is removed for service
Dedicated Toll-Free Number directly
answered by AQUaS Advantage Advisors
>
• Assist with initial product setup
• Maximize the quality of your AQUaS
Call us at:
1-87-SEE-AQUOS
>
Access to Specials and
Promotions designed exclusively
for AQUaS Advantage members
picture and sound
• Find the customer support solution that
meets your needs
>:
Extended Customer Support
Hours for added convenience
with the expertise to:
To Activate Your FREE Membership Today
Or visit our website at:
www.AQUOSADVANTAGE.com
• Expedited turnaround times for
take advantage of the following exclusive
>:
(1-877-332-7867)
Priority Services* including:
Customized Web Homepage with
comprehensive product and technical
information about your AQUaS television
'Benefits are only available to SHARP customers residing
in the fifty United States. Priority Services may not be
available based on location and availability. For more
information or for a copy of the terms and conditions,
visit WNW.sharousa.com/aqlJosadvantage or call us at
1·87·SEE·AQUaS (1-877 -332-7867).
Sharp and AQUaS are registered trademarks
of Sharp Corporation.
AQUaS ADVANTAG E
SM
SHAR~
IMPORTANT! P.lease fill out and return within the next 10 days.
This is your Sharp Product Registration Card. Returning this card will not affect warranty coverage, but may expedite the
processing of warranty claims. The additional information will also help us to develop new products that best meet your
needs and desires.
Register ONLINE at www.sharpusa.com
1.
1. [
Mr.
2.
3. [J Ms.
Mrs.
4.
CCN01-01
J Miss
Aquas LCDTV
last Name
Initial
firslName
ApI. No.
Street
State
City
ZIP Code
E-mail Address:
2.
Your date 01 birth:
13.
/
Month
3.
Marital status:
4.
Dale of purchase:
1.
Year
Married
2.
6.
Single
/
Month
5.
n
/
Year
Day
o
Model number:
(on back of unit)
14.
Serial number:
(on back of unit)
7. A. Where did you purchase this product?
1. [-1 Electronic Superstore (Best Buy, Circuit City. etc.)
2. [
Hi-Fi Specialty Store (Harvey, Tweeter, PC Richard. etc.)
3 Ll Received as a Gift
4 U Mass Merchant (Sears. etc.)
5 I"J Warehouse Club (CasteD. Sam's Club, BJ's Wholesale)
6. rJ Mail Order (Crutchfield. etc.)
7 I J Discount Store (Target, Wal-Mart, etc.)
8. n Computer Store (RadioShack. CompUSA. etc.)
9. C Internel Retailer (Amazon. Buy.com. etc.)
10. l Office Superstore (Staples. Office Depol. etc.)
B. Did you purchase an ellended service plan with this product?
1.[]Yes
2.0No
8. A.
Please check the location where this unil will be used:
1. 0 living Room
6. LJ Mobile HomelTrailer
2 0 Adult's Bedroom
7. [J family/Rec RoomfOen
3. [j Child's Bedroom
8. [J Home Theater
4. 0 Bathroom
9. [l Basement
5. lJ Home Office
B. Where will you install this lelevision?
1. Ll Wall
4. n Under a Cabinet
2. 0 Table
5. [1 Night Stand
3. 0 Entertainment Center
9.
How important were the following fealures on your purchase decision?
(5 point seale) 1:No Importance. 2:Low Importance. 3:Medium Importance.
4:High Importance. 5:Most Important
N.
Most
lmp~
1. Sharp/AQUOS Reputation .... I.l]
2. PriceNalue.....
...1.fl
3. Design.
.
1. [J
4. Picture Quality .. .
I.U
5. Audio Quality
1. 0
6. Product features
1. l
7. InpuVOutput Options
1._1
8. Built-in Tuners..
...1. [J
10.
11.
2.U
2.0
2.0
2.0
2.0
2.0
--3.n
4.0
3.LJ
4.[ [
4.0
5.l1
4.rJ
5.IJ
4.0
5.0
5.0
5.'
3.n
2.~
3.
3.C
4.0
4.n
4.0
5.0
In-store display
Newspaper insert
Product carton
Internet advertisement
Online article or review
Internet shopping website
What mosllnfluenced your decision 10 purchase a Sharp AQUOS TV?
(check up to two)
1. 0 Recommendation by a salesperson
2. 0 Recommendation by a friend/relative
3. 0 Sales promotion (Rebate. discount. sale. etc.)
4. L In-store comparison of models
5. r Past experience with brand
6. [' Recommendation by expert or product reviewer
7. G Comparison shopping website (MySimon, PriceGrabber,
Shopping.com, etc.)'
8. L Sharp website
9. U Online user reviews/message boards
10 rl TV advertising
11. LJ Online advertising
12. [ I Newspaper advertising
13. l
Magazine advertising
12. A.
What other brands of TVs did you seriously consider before selecting this
Sharp Product? (check up to two)
1. L No other brands considered 11. LJ Pioneer
2. r Dell
12.
Polaroid
•
13. ,_ RCA
15.
5.cJ
5.U
3.ll
4 r-' Hitachi
14. ::::J Samsung
5. 0 JVC
15. 0 Sany.
6. IJ LG
16. I] Sony
7 U Magnavox
17. 0 SyntaxtOlevla
8. n Mitsubishi
18. U Toshiba
9. 0 Panasonic
19. n Westinghouse
10. U Philips
20. 0 Zenith
B. Including this purchase. how many LCD or Plasma lele~isions do you
currently own?
1. r 1
3. [J 3
5. J 5 or more
2. r 2
4. fl 4
Below is a list of sta1ements which mayor may not be used to describe
your attiludes towards technology and your lifestyle. Please indicate to
what extent each statement describes your attitudes by cin:ling a number
from 1 to 10 where 1 means that the statemenl "Does not describe your
anitudes at a/rand 10 means that the statement 'Describes your altitudes
completely'. (circle ONE number for EACH statement)
Does Not Describe ~ Describes Your
Your Altiludes At All
~.J.lli.!Y
1. I like to Impress people
with my lifestyle
2. Technology is importanl
1
tome
3. I like lechnology .................... 1
4. I am very compelitive when
it comes to my career ..
2
5. Ilike to show off my laste
.. 1 2
and style ....
6. I am constantly looking lor new
ways to enlertain myself ........ 1 2
7. I spend most of my spare time doing
fun stutfwith my friends ...
1 2
8. My family is by far the most
important thing in myli!e ..
1
9. Most of my spare time is devoted
to activities with my family.... 1
10. t pul a lot of time and energy
into my career ...
11. Technology has made my
life easier ..
1 2
lmRIDliJ!!
3.0
3.0
2.C
Where did you first learn aboullhls product?
1. 0 Salesperson
8. Q
2. 0 Friend/relative
9. 0
3. [., Magazine article or review 10. ~
4. I J Sharp website
11. 0
5. Cl MagaZine advertisement
12. 1.1
6. U Newspaper advertisement 13. D
7. U Television commercial advertisement
3. [' HP
de~lces will you connect to this AQUOS TV?
U Video Game Console
8. 0 OVR (TIVo. elc)
rJ Cable set lOp box
9. [J VCR
n HO Cable TV
10. 0 Audio System
rJ Satellile sellop box
11. n Computer
U HO Satellite TV
12. n Video Camera
6 I 1 HQ Playback Device
13. n Digital Camera
(Blu-Ray, HO-DVD)
14. 0 Antenna (for rooftop or
DVD Player/Recorder
tabletop antenna)
Whal
1.
2.
3.
4.
5.
7
10
8
10
10
10
3
4
5
6
7
8
3
4
5
6
7
8
10
5
6
7
8
10
5
6
7
8
7
8
3
3
4
9
10
9
10
7
8
5
6
7
8
9
10
10
5
6
7
8
9
10
Not including yourself. what is Ihe GENDER and AGE (in
years) of children and other adults li~ing in your household?
1. 0 No one else in household
2 0 Child under 1 yr.
Male female
1 0
Age/Years
Male female
AgelYears
2 I [
yrs. 1. U
2.0
yrs
1.02.1I
yrs.1.0
2.·J
yrs.
16. Occupation: (check all that apply)
Pro!essionaVTechnical...
Upper ManagementfExecutive..
Middle Management ...
SaleslMarketing...
Clerical/Service Worker..
Tradesman/Machine Operalorflaborer..
17. Are you Dr your spouse:
You
0
0
0
n
[J
fJ
You
[ I
0
A Homemaker? ...
Retired?..
A Student?......
Self Employed/Business Owner? ..
Wor1<ing from a Home Office? ..
In the Military? ..
A Veteran? ..
LJ
[.J
[J
U
l"J
Spouse
1.
2.
3.
4.
5.
6.
C
[]
[]
o
n
[]
Spouse
1.
2.
3.
4.
5.
6.
7.
['I
I[
U
r_
[
[
r
18. Which group describes your annual family income?
1.
2.
3.
4.
5
6
7.
0
IJ
["]
J
U
Under S15,000
S15.0OO-S19.999
$20.000·S29,999
$30.000-S39.999
$40.000-S49.999
S50.000-$59.999
S60.000-S74.999
8.
9.
10.
11
12
13.
14.
j
n
[]
0
0
I
[]
575.000-599.999
SI00,000·5124.999
S125.0oo·$149,999
$1 50.000-S1 74.999
S175.000-S199.999
S200.000-$249.999
$250.000 & over
19.
Level ot education: (check highest level completed)
1. f
Completed High School
2.
Completed College
3. l..J Completed Graduate School
20.
Which
1.
2.
3.
4.
credit cards do you use regularly?
[ American Express. Diners Club
[J MasterCard. Visa, Discover
0 Department Siore, Oil Company, etc.
[] Do not use credit cards
PLEASE CONT[NUE ON BACK •
•
•
21.
For your primary residence, do you:
22.
Please check all that apply to your household.
1.!
2. [I
3.
4.
5.
6.
23.
1.
Own?
Shop by Catalog/Mail
Shop via the Internet
Member of Frequent Flyer Program
Donate to Charitable Causes
Own a Compact Disc Player
Have a Dog
7.
8.
9
10
11.
J
Rent?
r I Have a Cat
U
Own a Wireless/Cellular Phone
r I Subscribe to an Online/Internet Service
I]
U
Speak Spanish
Home Workshop/Do-It-Yourself
To help us understand our customers' lifestyles, please indicate the interests and activities in which you or your spouse enjoy participating on a regular basis.
Home lile
1. I I Grandchildren
2. I I Needlework/Knitting
3 I Sewing
4. I Flower Gardening
5. I Vegetable Gardening
6. I Crafts
7. I Automotive Work
8.
Photography
9. I! Home Video Recording
10. i I Pay Bills Online
Good lile
11. U Cultural/Arts Events
12. 11 Fashion Clothing
13. II Foreign Travel
14. Ii Cruise Ship Vacations
15. r] Travel in USA
16 I] Gourmet Cooking/Fine Foods
17. I] Wines
18 !] Self-Improvement
24.
2.
19. ! 1 Watching Sports on TV
20 I J NASCAR
Investing & Money
21. r-I Real Estate Investments
22. [-1 Stocks/Bond Investments
23 [I Contests/Sweepstakes
24. I] Casino Gambling
25 [I Moneymaking Opportunities
Sports, Fitness & Health
26. II Bicycling
27. U Golf
28 [1 Physical Fitness/Exercise
29 I' Running/Jogging
30 I! Snow Skiing
31. LJ Tennis
32. [-1 Health/Natural Foods
33. [J DietinglWeight Control
34. I I Walking for Health
Great Outdoors
35. [] Camping/Hiking
36. I! Fishing
37. Ii Hunting/Shooting
38 I 1 Power Boating
39. I J Sailing
40. I J Recreational Vehicles (RVs)
41. I j Wildlife/Environmental Issues
Hobbies & Interests
42. I J Buy Prerecorded Videos/DVDs
43. I J Listen to RecordsfTapes/CDs
44. [
Avid Book Reading
45. I
Bible/Devotional Reading
46 I
Art/Antique Collecting
47. I
Stamp/Coin Collecting
48.
Collectibles
49.
Our Nation's Heritage
50. i i Electronics
51. I i Science Fiction
52. I ! Science/ New Technology
Using the numbers in the above list, please indicate your 3 most important activities:
Thanks for taking the time to fill out this questionnaire. Your answers will be used for market research studies and reports They will also allow you to receive Important mailings and special offers from a
number of fine companres whose products and services relate directly to the specific interests, hobbies, and other information indicated above. Through this selective program, you will be able to obtain more
information about activities in which you are involved and less about those in which you are not. Please check here if, for some reason. you would prefer notto participate in this opportunity.
Failure to return this card will not diminish your warranty rights.
Copyright © 2006 All Rights Reserved
... TCADEA208WJZZ
Please seal with tape. Do not staple.
Printed In Mexico
PRODUCT REGISTRATION DEPARTMENT
Please do not send any products or other correspondence to this address.
If you have comments or suggestions about our product. please write to:
SHARP
Consumer Electronics Group
Sharp Plaza, Mahwah, NJ 07430-2135 U.SA.
First-Class
Postage
Required
Post Office will
not deliver
withoLJt proper
postage.
Register online at www.sharpusa.com
CCN01-01
SHARP ELECTRONICS CORPORATION
PO BOX 171098
DENVER CO 80217-1098
1I111111111111111111111111111111111111111111111111111111111111
SHARP!
Protect Your Investment
Register your product for:
~ Recall Notifications
We contact our customers in case of recall.
~ Owner Verification
Registration can serve as verification of your ownership in the event of
product theft or loss.
~ Efficient Service
Completing this card will help you obtain more efficient warranty service in
case there is a problem with your product.
~ Don't forget
We know you are busy, but registering is important, quick and easy!
Or register online at www.sharpusa.com