Hanna Instruments HI 98501-1 Instruction manual
Add to my manuals2 Pages
Hanna Instruments HI 98501-1 is a digital thermometer designed to measure temperatures of liquids and semi-solid substances. It has a wide temperature range from -50.0 to 150.0°C and provides accurate readings with a resolution of 0.1°C. The device is easy to use, simply dip the probe into the sample and wait for a few seconds for the display to stabilize. It is powered by a single 1.5V alkaline battery, which provides approximately 3000 hours of continuous use.
advertisement
Instruction Manual
HI 98501-1
Thermometer
SPECIFICATIONS
Range -50.0 to 150.0°C
Resolution 0.1°C
Accuracy
(@20°C/68°F)
±1°C
Typical EMC Deviation
±1°C
Environment 0 to 50ºC (32 to 122ºF);
95% RH max.
Battery Type 1 x 1.5V alkaline
Battery Life approx. 3000 hours of continuous use
Dimensions 66 x 50 x 25 mm
(2.6 x 2 x 1")
Weight 50 g (1.8 oz.) w w w . h a n n a i n s t . c o m
OPERATION
• Turn the meter ON.
• Dip the probe into the sample to be measured. An immersion level of 4 cm (1 ½") is recommended.
Do NOT immerse above the connector.
• Wait for a few seconds for the display to stabilize.
• When not in use, switch the meter OFF.
• Variations in readings or fading display can indicate a weak battery.
BATTERY REPLACEMENT
When the thermometer can not be switched on or the display fades, open the battery compartment (see below picture) and replace the 1.5V battery, while paying attention to its polarity.
Reattach the battery cover.
WARRANTY
This meter is warranted for one year against defects in workmanship and materials when used for its intended purpose and maintained according to instructions.
This warranty is limited to repair or replacement free of charge. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered.
If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. If the repair is not covered by the warranty, you will be notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid.
When shipping any instrument, make sure it is properly packaged for complete protection.
Battery should only be replaced in a safe area using the battery type specified in this instruction sheet.
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in which it is used. Operation of this instrument in residential areas could cause unacceptable interferences to radio and TV equipment. Any variation introduced by the user to the supplied equipment may degrade the instrument’s EMC performance. To avoid electrical shock, do not use these instruments when voltages at the measurement surface exceed 24 VAC or 60 VDC.
To avoid damages or burns, do not perform any measurement in microwave ovens.
IST98501-1 03/04
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project