DMP-BDT110_115_210_VQT3B58_eng.book 1 ページ 2010年12月2日 木曜日 午前9時18分
Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BDT210
DMP-BDT110
The illustration shows the image of DMP-BDT210.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
P
PC
VQT3B58
until
2010/12/28
DMP-BDT110_115_210_VQT3B58_eng.book 2 ページ 2010年12月2日 木曜日 午前9時18分
Getting star ted
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow
the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified service
personnel.
CAUTION
Unit
– This unit utilizes a laser. Use of controls or adjustments or performance
of procedures other than those specified herein may result in
hazardous radiation exposure.
– Do not place sources of naked flames, such as lighted candles, on this
unit.
Placement
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
– Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
(Inside of product)
2
VQT3B58
VQT3B58_engTOC.fm 3 ページ 2010年12月7日 火曜日 午前9時38分
IMPORTANT SAFETY
INSTRUCTIONS . . . . . . . . . . . . . . . .
Accessories. . . . . . . . . . . . . . . . . . . .
Unit and media care . . . . . . . . . . . . .
Control reference guide . . . . . . . . . .
Playable discs/Cards/USB devices . .
Playback menu. . . . . . . . . . . . . . . . . 27
Setup menu . . . . . . . . . . . . . . . . . . . 29
Connections & Settings
STEP 1 : Connecting to a TV . . . . . . 8
STEP 2 : Connecting to an amplifier/
receiver . . . . . . . . . . . . . . . 9
STEP 3 : Connecting to a broadband
network . . . . . . . . . . . . . . 10
STEP 4 : Connecting to an AC power
source . . . . . . . . . . . . . . . 12
STEP 5 : Settings . . . . . . . . . . . . . . 12
Playback
16
16
17
20
21
22
23
Troubleshooting guide . . . . . . . . . . . 34
Messages. . . . . . . . . . . . . . . . . . . . . 37
Supplemental information . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . 39
Limited Warranty (ONLY FOR U.S.A.
AND PUERTO RICO) . . . . . . . . . . . 41
Limited Warranty
(Only for CANADA) . . . . . . . . . . . . . 42
Referencia rápida en español
(Spanish Quick Reference) . . . . . . . . . . . 43
Index . . . . . . . . . . . . . . . . . Back cover
About descriptions in this Owner’s
Manual
≥ Instructions for operations are generally described
using the remote control.
≥ This Owner’s Manual is applicable to models
DMP-BDT210 and DMP-BDT110. Unless otherwise
indicated, illustrations in this Owner’s Manual are of
DMP-BDT210.
[BDT210] [BDT110] : indicates features applicable to
DMP-BDT210 and DMP-BDT110, respectively.
About Firmware updates (> 15)
24
26
Reference
Inserting or removing media . . . . . .
HOME menu . . . . . . . . . . . . . . . . . .
Playing video contents . . . . . . . . . .
Enjoying 3D video . . . . . . . . . . . . . .
Playing still pictures . . . . . . . . . . . .
Playing music . . . . . . . . . . . . . . . . .
Enjoying VIERA CASTTM . . . . . . . . .
Playing contents saved on other
equipment . . . . . . . . . . . . . . . . . . . .
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”) . . . . . .
Reference
Settings
2
4
4
5
6
Connections & Settings
Settings
Playback
Getting started
Getting started
Table of contents
VQT3B58
3
DMP-BDT110_115_210_VQT3B58_eng.book 4 ページ 2010年12月8日 水曜日 午後4時39分
Accessories
Unit and media care
Check the supplied accessories before using this unit.
∫ Clean this unit with a soft, dry cloth
1
≥ Never use alcohol, paint thinner or benzine to clean this
unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Remote control
(N2QAYB000574)
Batteries for remote control
2
1
AC power supply cord
(K2CB2CB00022)
∫ Clean the lens
≥ Use the lens cleaner (not supplied) to clean the unit’s lens.
[For_Canada]
The enclosed Canadian French label sheet corresponds to the English
display on the front and back side of the unit.
∫ Clean discs
DO
≥ Product numbers provided in this Owner’s Manual correct as of
December 2010. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
≥ [For_U.S.A._and_Puerto_Rico] : To order accessories, refer to
“Accessory Purchases (United States and Puerto Rico)” on page 41.
[For_Canada] : To order accessories, call the dealer from whom you
have made your purchase.
DO NOT
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
Using the remote control
Insert so the poles (i and j) match those in the remote
control.


R6/LR6, AA
(Alkaline or
manganese batteries)
Point it at remote control signal sensor on this unit. (
∫ To dispose or transfer this unit
5)
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
CAUTION
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
4
VQT3B58
≥ Handle discs by the edges to avoid inadvertent scratches
or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
presets to delete the user settings. ( 34, “To return all
settings to the factory preset.”)
≥ The operation history may be recorded in the memory of
this unit.
VQT3B58~Body_eng.fm
5 ページ 2010年12月14日 火曜日 午前10時57分
1
2
9
1
10
2
11
12
3
13
3
4
5
6
7
8
14
15
4
5
9
10
16
17
18
6
11
12
13
14
15
16
17
18
19
20
19
20
7
8
Turn the unit on and off
TV operation buttons
You can operate the Panasonic TV through the unit’s
remote control. (Depending on the TV these buttons
may not work.)
[Í TV POWER] : Turn the television on and off
[AV] : Switch the input select
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers or characters
(> 23)
[CANCEL] : Cancel
Basic playback control buttons (> 17)
Show status messages (> 17)
Show Pop-up menu/Top menu/Direct Navigator (> 17)
Show sub menu (> 18)
These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Operating contents of VIERA CAST. (> 23)
Transmit the remote control signal
Open or close the disc tray (> 16)
CAUTION
Do not place objects in front of the unit. The disc tray
may collide with objects when it is opened, and this may
cause malfunction.
Show Playback menu (> 27)
Start up a video communication (> 23)
Setup 3D effects (> 20)
Select audio (> 17)
Show NETFLIX screen
Exit the menu screen
Displays the Home screen of the VIERA CAST (> 23)
Show HOME menu (> 16)
Selection/OK, Frame-by-frame (> 17)
Return to previous screen
11
ヤモロロ
Pull to flip down
the front panel.
SD CARD
1
1
2
3
4
5
2
3
4
56
POWER button (POWER Í/I) (> 12)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
Disc tray (> 16)
SD card slot (> 16)
USB port (> 16)
CALL LED (> 23)
The LED will light up when this unit receives incoming
call etc. of the video communication.
7
8 9
10
6
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and right
7 Display
8 Stop (> 17)
9 Start play (> 17)
10 Open or close the disc tray (> 16)
11 [BDT210] : Touch Free Sensor (> 33)
The LED will light up when TOUCH-FREE SENSOR is
activated.
Rear panel terminals (> 8–10, 12)
VQT3B58
5
Getting started
Control reference guide
DMP-BDT110_115_210_VQT3B58_eng.book 6 ページ 2010年12月2日 木曜日 午前9時18分
Playable discs/Cards/USB devices
Type
Logo examples
Type detail
BD-Video
Video
JPEG/
MPO (3D still picture)
BD-R
Video
DivX® [BDT210_for_Canada]
MKV
DVD-Video
DVD-R
DVD
DVD-R DL
DVD-RW
—
6
VQT3B58
Video
AVCHD
DivX® [BDT210_for_Canada]
MKV
MP3
JPEG/
MPO (3D still picture)
Video
AVCHD
CD-R
CD-RW
Music [CD-DA]
DivX® [BDT210_for_Canada]
MKV
Music [CD-DA]
MP3
JPEG/
MPO (3D still picture)
SD Memory Card (from 8 MB to 2 GB) MPEG2
SDHC Memory Card (from 4 GB to 32 GB) AVCHD
JPEG/
SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro types)
MPO (3D still picture)
SD
USB
Video
+R/+RW/+R DL
Music CD
CD
Video
BD-RE
BD
—
Playable contents
( 39)
—
USB devices
(up to 2 TB)
DivX® [BDT210_for_Canada]
MKV
MP3
JPEG/
MPO (3D still picture)
7 ページ 2010年12月9日 木曜日 午後12時0分
∫ Discs that cannot be played in this
unit
Any other disc that is not specifically supported or
previously described.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ [BDT210_for_U.S.A.] [BDT110] : All types of DivX discs
[BDT210_for_Canada] : DivX Plus HD discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code “A”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
Example:
1
ALL
1
2
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded
by a recorder, etc. needs to be finalized by the recorder to
play on this unit. Please refer to the recorder’s instructions.
∫ BD-Video
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video.
– [BDT110] : If “Dolby D/Dolby D +/Dolby TrueHD” is set to
“PCM”, the maximum possible number of Dolby sound is
5.1ch PCM. (> 30)
∫ Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
∫ SD card
≥ miniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used,
but must be used with an adaptor card.
These are usually supplied with such cards,
or otherwise customer provided.
≥ Keep the Memory Card out of reach of
children to prevent swallowing.
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet
SD Card Specifications FAT12 and FAT16 formats, as well
as SDHC Memory Cards in FAT32 format (Does not
support long file name.) and SDXC Memory Cards in
exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
≥ Useable memory may be slightly less than the card
capacity.
∫ USB device
≥ This unit does not guarantee connection with all USB
devices.
≥ This unit does not support USB device charging.
≥ When using Communication Camera TY-CC10W or
Wireless LAN Adaptor DY-WL10, connect it to the rear
terminal of this unit. (> 10, 23)
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32. If the HDD
is not recognized the power to the HDD may not be
supplied. Supply power from an external source.
≥ It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
≥ The producers of the disc can control how discs are played, so you may
not always be able to control play as described in this Owner’s Manual.
Read the disc’s instructions carefully.
∫ 3D
≥ 3D videos and 3D still pictures can be played back when
this unit is connected to a 3D compatible TV using a High
Speed HDMI Cable.
≥ 2D video can be enjoyed as 3D virtually. (> 20)
VQT3B58
7
Getting started
VQT3B58~Body_eng.fm
VQT3B58~Body_eng.fm
8 ページ 2010年12月8日 水曜日 午後4時53分
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the back cover). It is recommended that
you use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft.) or
less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
[BDT110]
COMMUNICATION 10BASE-T/100BASE-TX
CAMERA
WIRELESS LAN
ADAPTOR
LAN
Back of the unit
10BASE-T/100BASE-TX
COMMUNICATION
CAMERA
LAN
∫ Via an HDMI AV OUT terminal (High quality)
∫ Via a VIDEO OUT terminal (Standard quality)
– It is possible to play back 3D videos and 3D still
pictures by connecting this unit with a 3D compatible
TV.
AUDIO IN
R
L VIDEO IN
HDMI IN
Audio/Video cable
HDMI cable
10BASE-T/100BASE-TX
E-T/100BASE-TX
LAN
≥ Set “HDMI Audio Output” to “On” (> 32).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (> 26).
8
VQT3B58
COMMUNICATION
CAMERA
LAN
≥ Connect terminals of the same color.
DMP-BDT110_115_210_VQT3B58_eng.book 9 ページ 2010年12月8日 水曜日 午後4時39分
STEP 2 : Connecting to an amplifier/receiver
∫ Via an HDMI AV OUT terminal
∫ Via an OPTICAL terminal
– It is possible to play back 3D videos and 3D still
pictures when the connected TV and amplifier/
receiver are 3D compatible.
Amplifier/receiver
HDMI IN
HDMI
IN
(ARC)
Connections & Settings
OPTICAL IN
HDMI cable
Multi channel
speakers
(ARC)
Optical cable
Amplifier/receiver
HDMI IN
HDMI cable
E-T/100BASE-TX
LAN
≥ Set “HDMI Audio Output” to “On” ( 32).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver ( 30).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” ( 26).
≥ When connecting to a non-3D compatible amplifier/
receiver, connect this unit to a TV via HDMI AV OUT, then
connect the TV and the amplifier/receiver, using HDMI
cables for the respective connections.
– Please note, however, that the audio can only be up to
5.1ch.
≥ When using the TV or amplifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV’s sound by
amplifier it is also required to connect the amplifier/
receiver and TV using an optical digital cable.
≥ When connecting a TV ( 8) with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” ( 32).
≥ Set “Digital Audio Output” depending on the used terminal
and connected amplifier/receiver ( 30).
VQT3B58
9
DMP-BDT110_115_210_VQT3B58_eng.book 10 ページ
2010年12月6日 月曜日 午前10時16分
STEP 3 : Connecting to a broadband network
The following services can be used when this unit is
connected to broadband.
≥ Firmware can be updated ( 15)
≥ You can enjoy BD-Live ( 19)
≥ You can enjoy VIERA CAST ( 23)
≥ You can access other devices (Home Network) ( 24)
For details about connection method, refer to the
instructions supplied with the connected equipment.
∫ LAN cable connection
∫ Wireless LAN connection
– [BDT210] : Wireless LAN is built in. (There is no need to
connect a Wireless LAN Adaptor.)
– [BDT110] : Connect the Wireless LAN Adaptor
DY-WL10 (optional).
[BDT110]
COMMUNICATION
CAMERA
10BASE-T/100BASE-TX
COMMUNICATION
CAMERA
WIRELESS LAN
ADAPTOR
LAN
LAN Cable
Broadband router, etc.
LAN Cable
Modem
(Broadband)
*Provided by ISP
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
10
VQT3B58
10BASE-T/100BASE-TX
LAN
Wireless LAN Adaptor
Wireless router, etc.
LAN Cable
Modem
(Broadband)
*Provided by ISP
≥ [BDT110] : Only the Wireless LAN Adaptor DY-WL10
(optional) can be used.
≥ [BDT110] : Read the operating instructions for the Wireless
LAN Adaptor DY-WL10 (optional) thoroughly when using
it.
≥ For up to date compatibility information on your Wireless
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/consumer/support (For U.S.A.)
≥ The unit is not compatible with public wireless LAN
services provided in airports, stations, cafes etc.
≥ [BDT110] : To simultaneously connect the Wireless LAN
Adaptor DY-WL10 (optional) and a LAN cable, use the
extension cable supplied with the DY-WL10.
2010年12月2日 木曜日 午前9時18分
Precautions of Wireless LAN connection
The following limits are in place regarding the usage of this unit or
Wireless LAN adaptor. You must be aware of these limits before using
these devices.
Panasonic will in no way be responsible for any incidental damage which
may arise due to a failure to obey these limits, or to any condition of use or
disuse of these devices.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
≥ This unit or Wireless LAN adaptor contain delicate electronic
components.
Please use these devices in the manner in which it was intended and
follow the following points:
– Do not expose these devices to high temperatures or direct sunlight.
– Do not bend, or subject these devices to strong impacts.
– Keep these devices away from moisture.
– Do not disassemble or alter the device in any way.
[BDT210]
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules and RSS-Gen of IC
Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of this device.
Contains FCC ID: VPY-LBSJ
Contains IC:772C-LBSJ
This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to
co-channel Mobile Satellite systems. High power radars are allocated as
primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interference with and/or damage this
product.
This equipment complies with FCC/IC radiation exposure limits set forth
for an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment has very low levels
of RF energy that it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it should be installed
and operated keeping the radiator at least 20cm or more away from
person’s body (excluding extremities: hands, wrists, feet and ankles).
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded
interface cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables may result in interference
to radio and TV reception. Any changes or modifications not approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
VQT3B58
11
Connections & Settings
DMP-BDT110_115_210_VQT3B58_eng.book 11 ページ
VQT3B58~Body_eng.fm
12 ページ 2010年12月10日 金曜日 午後9時1分
STEP 4 : Connecting to
an AC power source
10BASE-T/100BA
COMMUNICATION
CAMERA
STEP 5 : Settings
Easy Setting
After connecting your new player for the 1st time and
pressing the power button, a screen for the basic settings
will appear.
Preparation
LAN
AC power supply cord
(supplied)
To a household AC outlet
≥ This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
Install this unit so that the power cord can be unplugged from the
socket outlet immediately if any problem occurs.
Turn on the television and select the appropriate video
input on the television.
1 Press [Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
2 Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. ( 33)
Touch Free Sensor [BDT210]
By setting “Sensor” in “Touch Free Sensor” to “On”, you can open or close
the tray just by waving your hand over the TOUCH-FREE SENSOR on the
upper side of the unit. (This will also work when in stand-by.)
≥ Be aware that the TOUCH-FREE SENSOR may function unintentionally
in the following cases:
– When your hand or arm, an object, a small child, or a small animal
comes close to the upper part of the unit
– When an object is placed on top of the unit and vibration is applied
– When connecting a cable etc. to the rear of the unit
≥ Reactive distance of the sensor is automatically set in accordance with
the installation conditions at the time of power supply connection and
when the open/close button is pressed. To prevent an incorrect setting,
do not place your hands or objects above the unit at these times.
≥ Depending on the usage conditions, the TOUCH-FREE SENSOR may
stop working or the reactive distance may become shorter. In such
cases, press the tray open/close button once.
12
VQT3B58
VQT3B58~Body_eng.fm
13 ページ 2010年12月10日 金曜日 午後9時1分
Network Easy Setting
The configuration of your network is about to begin. If you
failed to make the settings, refer to page 14.
Wired connection
∫ “Search for wireless network”
The available wireless networks will be displayed.
1 Select your network name and press [OK].
≥ If your network name is not displayed search again by
pressing the [R] button on the remote control. Stealth
SSID will not be displayed, in this case enter manually.
Wireless Settings
[BDT210]
Select a wireless network for connection.
Network name (SSID)
Network Easy Setting
Select a connection mode.
Current setting
: Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired."
Wireless LAN connection:
Select "Wireless."
OK
R Search again
RETURN
SUB
MENU
Wired
Wireless
OK
RETURN
Reception
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
G
B
Connections & Settings
Select “Wired” and press [OK].
Y
When your wireless network is encrypted
2 Press [OK] to select “Encryption Key”.
Wireless Settings
Enter the encryption key of the wireless network.
Follow the on-screen instructions to make your connection
settings.
Encryption Key
Set
Wireless connection
Preparation
≥ Obtain your network name ( 15, SSID).
≥ If your wireless connection is encrypted please be
sure that you know your encryption key.
≥ [BDT110] : If “Wireless LAN Adaptor is not connected.” is
displayed, check that the Wireless LAN Adaptor is fully
inserted. Alternatively, disconnect and reconnect it. If there
is still no change in the display, consult your dealer for
advice.
1 Select “Wireless” and press [OK].
2 Select “Search for wireless network” or
“WPS (PUSH button method)” and press
[OK] then follow the on-screen
instructions and make the settings.
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
3 Enter your encryption key.
Encryption Key
_
1
2
3
4
5
6
7
8
9
0
Delete
Finish
OK
RETURN
1 2 3 4 5
a
B C
d
E F
g
H I
j
K L
m
N O
Q R S p
A
D
G
J
M
P
T
6
b
e
h
k
n
q
7
c
f
i
l
o
r
8 9 0
+ - *
%
&
@
_
)
} ~
/
#
<
[
s
=
$
>
]
(
t u v {
U V
W X Y Z w x y z
. , ? ! “ ’ : ;
\
0 - 9
I
` ^
Space
To enter SSID manually
If your SSID is not displayed in step 1, follow these steps.
1 To display SSID input screen :
Press [HOME]
select “Setup”
select “Player
Settings”
select “Network”
[OK] select “Network
Settings” [OK] select “Wireless Settings” [OK]
select “Connection Setting” [OK] select “Manual
setting”
[OK]
2 Press [OK] to select “SSID” and enter your SSID.
Wireless Settings
Enter your network name (SSID) to connect.
Search for wireless network
WPS (PUSH button method)
SSID
Set
∫ “WPS (PUSH button method)”
If you are using a Wireless router that supports WPS (Wi-Fi
Protected Setup), you can easily perform the settings.
≥ If your wireless network is encrypted, go to step 2.
VQT3B58
13
VQT3B58~Body_eng.fm
14 ページ 2010年12月10日 金曜日 午後9時1分
When you experience
problems with settings
Network Easy Setting
(Home Network Connection Check)
Network Easy Setting (Home Network Connection Check)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
Wireless Settings
: Fail
: Fail
: Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
Wireless Settings
Failed to complete.
A conflict with another device occurred.
Do you want to configure wireless network connection
setting again ?
Yes
No
OK
Yes
Display
A conflict with another
device occurred.
A time out error
occurred.
An authentication error
or a time out error
occurred.
A device error occurred.
1. LAN cable connection or
Wireless setting
Check the following
≥ Please wait a few moments,
and then try again.
≥ Setting of the Wireless router
for MAC Address etc.
≥ The signal may be weak.
[BDT110] : Using the USB
extension cable supplied with
the Wireless LAN Adaptor,
adjust the position of the
Wireless LAN Adaptor.
≥ The SSID ( 15) and the
encryption key of the Wireless
router.
≥ Please wait a few moments,
and then try again.
≥ [BDT110] : Connection of
Wireless LAN Adaptor
≥ Contact our Customer
Service Center or your
nearest dealer.
Check the
following
Display
No
OK
: Fail
2. IP address setting
: Fail
3. Connection to gateway
: Fail
1. LAN cable connection or
Wireless setting
: Pass
2. IP address setting
: Fail
3. Connection to gateway
: Fail
1. LAN cable connection or
Wireless setting
: Pass
2. IP address setting
: Pass or
Home
network
available
3. Connection to gateway
: Fail
≥ Connection of
the LAN
cables ( 10)
≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address/
DNS
Settings”
( 32)
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet
: Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
OK
Display
14
VQT3B58
Check the following
Cannot find the
server.
(Error code: B019)
≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address/
DNS Settings” ( 32)
Failed to connect to
the server.
(Error code: B020)
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” ( 32) and the router
15 ページ 2010年12月9日 木曜日 午後6時38分
Firmware updates
≥ Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates settings
relating to the connection and security of wireless LAN devices. To see
whether your Wireless router supports WPS, check the Wireless router
operating instructions.
≥ You can perform this setup anytime by selecting “Network Easy Setting”
in the Setup menu. (> 32)
≥ You can redo these settings individually using “Network Settings”.
(> 32)
≥ Do not use this unit or Wireless LAN adaptor to connect to any wireless
network for which you do not have usage rights.
During automatic searches in a wireless network environment,
wireless networks (SSID*) for which you do not have usage rights
may be displayed; however, using these networks may be regarded
as illegal access.
≥ After performing network settings on this unit, the settings (encryption
level, etc.) of the Wireless router might change. When you have trouble
getting online on your PC, perform the network settings on your PC in
accordance with the settings of Wireless router.
≥ Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by
a third party, or the leaking of data such as personal or secret
information.
* An SSID (Service Set IDentification) is a name used by wireless LAN
to identify a particular network. Transmission is possible if the SSID
matches for both devices.
Reprogramming the remote
control
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
message is displayed.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME] > select “Setup” > select “Player
Settings” > select “Others” > [OK] > select “Firmware
Update” > [OK] > select “Update Now”
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on
the unit’s display. Unit will restart and the following screen
will be displayed.
The firmware was updated.
Current Version: x.xx
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (> 33, “Remote Control Code”)
OK
RETURN
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 33, “System
Information”)
≥ Downloading will require several minutes. It may take longer or
may not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set
“Automatic Update Check” to “Off”. (> 33)
VQT3B58
15
Connections & Settings
VQT3B58~Body_eng.fm
VQT3B58~Body_eng.fm
16 ページ 2010年12月7日 火曜日 午前9時40分
Inserting or removing
media
Playback
HOME menu
Major functions of this unit can be operated from the HOME
menu.
Preparation
Turn on the television and select the appropriate video input
on the television.
CALL
SD CARD
1
[BDT210]
≥ When inserting a media item, ensure that it is facing the
right way up.
≥ When removing the SD card, press on the center of the
card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
1 Press [Í POWER] to turn on the unit.
2 Press [OK] or [3, 4, 2, 1] to select the
item.
HOME
Network
Blu-ray Disc Player
Photos
Setup
Music
Videos
≥ When a media is inserted, contents selection screen
for that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press
[RETURN] several times.
Videos/
Photos/
Music
Network
Setup
USB
Play back the contents.
(> 17, 21, 22)
≥ When multiple contents are
recorded, select the types
of contents or the title.
Internet
Content
Displays the Home screen of
VIERA CAST. (> 23)
Home
Network
DLNA Client (> 24)
Disc
SD card
Media Renderer (> 25)
Player
Settings
(> 29)
SD Card
Management
(> 19)
Wallpaper
Changes the screen
background of HOME menu.
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
16
VQT3B58
DMP-BDT110_115_210_VQT3B58_eng.book 17 ページ
2010年12月2日 木曜日 午前9時18分
Playing video contents
SD
USB
These functions may not work depending on the media and
contents.
1 Insert the media.
Stop
If the menu is displayed, press [3, 4, 2, 1] to select
the item. ( 16)
2 Press [3, 4] to select the title and press
[OK].
When a message screen is displayed while playing back
3D compatible video software, play back in accordance
with the instructions.
∫ To show menus
You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [POP-UP MENU/TOP MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
∫ To show the status messages
e.g.BD-Video
T: Title, C: Chapter, PL: Playlist
BD-Video
0:05.14
0:20.52
Current position
Resume play function
Press [1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press
[∫STOP] several times to display “STOP” on the unit’s display.
≥ On BD-Video discs including BD-J, the resume play
function does not work.
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart play.
Search
While playing, press [SEARCH6] or
[SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
Elapsed time in the title
C1
The stopped position is memorized.
Search/Slow-motion
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
display information may change or will disappear from the
screen.
 T1
Press [∫STOP].
Playback
BD DVD CD
Other operations during play
Play
Total time
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: Forward direction [SEARCH5]
only.
The speed increases up to 5 steps.
≥ Press [1PLAY] to revert to normal playback speed.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [∫STOP] when you have finished playback to protect the unit’s
motor, your television screen and so on.
≥ Depending on media and contents, the display may change or may not
appear.
≥ DivX [BDT210_for_Canada] and MKV: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have been dragged and dropped, copied and pasted to the media.
≥ To save on electricity, the power is turned off automatically if there is no
button operation for about 30 minutes when not playing back (such as
when paused, displaying the menu, displaying still pictures, etc.).
(Compatible with ENERGY STAR)
Skip
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward or
backward.
≥ Press [1PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language, etc.
VQT3B58
17
DMP-BDT110_115_210_VQT3B58_eng.book 18 ページ
2010年12月6日 月曜日 午前10時16分
Useful functions
1 Press [SUB MENU].
2 Select an item, then press [OK].
While Direct Navigator screen is displayed
Properties
To display the titles properties (recording
date, etc.).
View
Chapters
To select the chapter.
View
Playlists
To play playlists.
View Titles
To select the title.
Select
Folder
To switch to another folder.
Screen
Aspect
When black bars are shown at the top,
bottom, left, and right sides of the screen,
you can enlarge the image to fill the
screen.
Top Menu
To display Top Menu.
Pop-up
Menu
To display Pop-up Menu.
Menu
To display Menu.
3D Settings
2D video can be virtually output as 3D, or
output effect of the 3D video can be setup.
( 20)
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” ( 31) is set to “4:3 Pan & Scan” or
“4:3 Letterbox”, the “Zoom” effect in “Screen Aspect” is
disabled.
≥ Depending on the media and contents, displayed items are different.
∫ Displaying subtitle text
You can display subtitle text on the DivX [BDT210_for_Canada]
and MKV video disc with this unit. The operation might be
different or it may not operate properly depending on the
way the file was made or the state of this unit (playing,
stopped, etc.).
Set “Subtitle” in “Disc” (
27)
≥ DivX and MKV video files that do not display “Text” do not contain
subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language
settings. ( 29)
≥ This function has no relation to the subtitles specified in DivX standard
specifications and has no clear standard.
VQT3B58
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is
an official DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to convert
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD
section in your device setup menu.
Go to vod.divx.com for more information on how to complete
your registration.
≥ Video images of the copyright-protected DivX contents
stored on USB device can be output only through the
HDMI output terminal.
Display the unit’s registration code.
( 33, “DivX Registration” in “Others”)
While playing
18
Regarding DivX [BDT210_for_Canada]
DivX Registration
The registration code is necessary to
register this unit to play protected
DivX videos.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/
10 alphanumeric
characters
≥ After playing DivX VOD content for the first time, the
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration
code different from this unit’s code, you will not be able to
play this content.
Cancel the unit’s registration.
( 33, “DivX Registration” in “Others”)
Press [2, 1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in
www.divx.com.
Regarding DivX VOD content that can only
be played a set number of times
Some DivX VOD contents can only be played a set number
of times. When you play this content, the number of times
already played and initially playable number of times is
displayed.
≥ The remaining number of plays decreases each time a
program is played. However, when playing from the point
where play was previously stopped, the remaining number
of plays does not decrease due to the resume play
function.
DMP-BDT110_115_210_VQT3B58_eng.book 19 ページ
2010年12月8日 水曜日 午後4時39分
Enjoying BD-Live or
picture-in-picture in BD-Video
Enjoying BD-Live discs with
Internet
Playing picture-in-picture
To turn on/off secondary video and audio
[DISPLAY]
select “Disc”
[1]
select
“Signal Type”
[OK]
set “Video” and
“Soundtrack” in “Secondary Video” to “On”
or “Off”
BD-Live allows you to enjoy more functions such as
subtitles, exclusive images and online games by connecting
this unit to the Internet. Since most of the BD-Live
compatible discs are played back using the BD-Live
function, additional contents are required to be downloaded
into the external memory (local storage).
≥ This unit is using an SD card as a local storage device.
BD-Live function cannot be used when there is no SD card
inserted.
Secondary video
1 Perform network connection and
settings. (
10, 13)
2 Insert an SD card with 1 GB or more free
Primary video
space.
∫ Deleting data/Formatting SD cards
If you no longer need data recorded on the SD card, you can
delete data with the following operation.
1
2
3
4
5
Insert an SD card.
Press [HOME].
Press [OK] to select “Setup”.
Press [1] to select “SD Card Management”.
Press [3, 4] to select “BD-Video Data Erase” or
“Format SD Card” and press [OK].
SD Card Management
SD card
≥ The usable functions and the operating method may vary with each
disc, please refer to the instructions on the disc and/or visit their
website.
≥ Some BD-Live content available on the Blu-ray discs may require an
Internet account to be created in order to access the BD-Live content.
Follow the screen display or instruction manual of the disc for
information on acquiring an account.
≥ To use BD-Live function, it is recommended that you format the card on
this unit. If the SD card you use is formatted, all data on the card will be
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
( 29).
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to
“Off”, secondary audio will not be played ( 30).
No. of Files 6
Free space 300 MB
BD-Video Data Erase
Format SD Card
OK
RETURN
Format this SD Card.
6 Press [2, 1] to select “Yes” and press [OK].
7 Press [2, 1] to select “Start” and press [OK].
VQT3B58
19
Playback
3 Insert the disc.
VQT3B58~Body_eng.fm
20 ページ 2010年12月9日 木曜日 午後12時10分
Enjoying 3D video
You can enjoy powerful 3D videos with realistic sensations
by connecting this unit with a High Speed HDMI Cable to a
3D compatible TV.
Useful functions
1 While playing
Press [
].
2 Select an item, then press [OK].
Signal
Format
The image is an illustration.
Original
Keep original picture format.
Side by
side
3D picture format comprising of
left and right screens.
2D to 3D
Converts 2D pictures to 3D effect.
Normal
Playback pictures with normal 3D
effects.
Soft
You can enjoy 3D pictures with a
feeling of broadness, holding
back the depth perception.
Preparation
Connect 3D compatible TV to an HDMI AV OUT terminal of
this unit using a High Speed HDMI Cable. (> 8, 9)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(> 17)
≥ Playback following the instructions displayed on the
screen.
Set 3D effect manually.
3D
Picture
Mode
Manual
Settings
3D settings
Perform the following settings as necessary.
3D BD-Video
Playback
It is also possible to play back 3D
discs in 2D (conventional video).
(> 29)
3D Type
If 3D video cannot be played back in
3D, change the settings as required
by the connected TV format. (> 31)
≥ Change the settings for 3D on the
TV also when “Checker board” or
“Side by side” is selected.
3D Playback
Precautions
Hide the 3D viewing warning screen.
(> 31)
Pop-Out Level
Adjust the pop-up position for the
Playback menu or message screen
etc. (> 28)
20
VQT3B58
Distance
Set the amount of depth
perception.
Screen Type
Selects how the screen appears
during 3D playback (flat or
round).
Frame Width
Set the amount of feathering at
the edge of screen.
Frame Color
Set the color of feathering at the
edge of screen.
It appears also by pressing [SUB MENU] and selecting “3D
Settings”.
≥ Depending on the contents, displayed items are different.
≥ Please refrain from viewing 3D images if you do not feel well or are
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
≥ Depending on the connected TV, the video being played back might
switch to 2D video due to changes in resolution etc. Check the 3D
setting on the TV.
≥ 3D images may not output as settings of “HDMI Resolution” and “24p
Output”. (> 31)
21 ページ 2010年12月10日 金曜日 午後9時5分
Playing still pictures
BD DVD CD
SD
USB
(BD-RE, DVD-R/-R DL, CD-R/RW, SD Card, USB device)
In order to play back 3D still pictures (MPO), this unit should
be connected to a Full HD 3D compatible TV via an HDMI
terminal.
Useful functions
1 Press [SUB MENU].
2 Select an item, then press [OK].
While Photo View screen is displayed
1 Insert the media.
If the menu is displayed, press [3, 4, 2, 1] to select
the item. (> 16)
2 Press [3, 4] to select the folder and
press [OK].
“3D View” : 3D still pictures (MPO) are sorted here. To
play back in 3D, select from “3D View”. (Still pictures in
“2D View” are played back in 2D)
Slideshow
Photo View
SD card
2D View
3D View
Folder Name
Photos
XXXXXXXX
42
XXXX
105
XXXXXXXX
58
XXXXXXXX
77
48
XXXXXXXX
5
XXXXXXXX
SUB
MENU
R
OK
RETURN
G Slideshow
Page Up
Page Down
B Select
Page01/02
Y
To select folders or still pictures that are played on
slideshow.
3 Press [3, 4, 2, 1] to select the still
picture and press [OK].
Press [2, 1] to display the previous or next still picture.
To exit the screen
Press [POP-UP MENU/TOP MENU].
∫ To show the still picture properties
While playing, press [STATUS] once or twice.
Date
11/12/2007
Size
500 x 375
Manufacturer
Equipment
To exit the screen
Press [STATUS].
1 / 26
Start Slideshow
You can display still pictures one by one at a
constant interval.
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Random Soundtrack
Background music is played in random
order.
Soundtrack
An MP3 on the USB device can be played
back during the slideshow of JPEG on the
USB device or the SD card. (A music CD
also can be played back during the
slideshow of JPEG on the SD card.)
While playing
Start
Slideshow
Start the slideshow.
Screen
Aspect
Switch the screen mode.
Status
Show the still picture properties.
Rotate Right
Rotate Left
Playback
VQT3B58~Body_eng.fm
Rotate the still picture.
Wallpaper
Set the still picture to the wallpaper of
HOME screen. (> 16)
Pop-Out
Level
Pop-up position for the Playback menu or
message screen etc. can be adjusted during
3D playback.
≥ Depending on the condition of the unit and media contents, displayed
items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
≥ When both the music CD and the USB device with recorded MP3 is
inserted into this unit, the music CD has priority to be played back as
background music.
≥ Still pictures displayed as “
” cannot be played back with this unit.
VQT3B58
21
DMP-BDT110_115_210_VQT3B58_eng.book 22 ページ
2010年12月2日 木曜日 午前9時18分
Playing music
DVD CD USB
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1 Insert the media.
If the menu is displayed, press [3, 4, 2, 1] to select
the item. ( 16)
2 Press [3, 4] to select the track and press
[OK].
DIRECT NAVIGATOR
CD
No.
01
02
03
04
05
0.09
Track1
5 Tracks / Total Play Time 20min54sec
Music list
Track Name
Track1
Track2
Track3
Track4
Track5
4.30
Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
Play
RETURN
“
” indicates the track currently playing.
Playing a track in another
folder
1 While the Direct Navigator screen is displayed
Press [SUB MENU].
2 Press [3, 4] to select “Select Folder”
and press [OK].
≥ You cannot select folders that contain no compatible tracks.
22
VQT3B58
VQT3B58~Body_eng.fm
23 ページ 2010年12月9日 木曜日 午後5時41分
Enjoying VIERA CASTTM
To exit from VIERA CAST
Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].
You can access a selection of Internet services from the
Home screen with VIERA CAST, for example YouTube,
Picasa Web Albums. (Current as of December 2010)
Preparation
≥ Network connection (> 10)
≥ Network setting (> 13)
To enjoy video communication (ex. SkypeTM) :
≥ Connect this unit with optional Communication Camera
(TY-CC10W or compatible equipment).
Depending on the area, this optional camera may not be
available. Please consult your local Panasonic dealer for
advice.
10BASE-T/100BASE-TX
Back of the unit
≥ When playing content from a disc/SD card and/or USB device VIERA
CAST cannot be accessed by pressing [VIERA CAST].
≥ In the following cases, settings are possible using “Internet Content
Settings” (> 32)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed
correctly. A high-speed Internet service with a speed of at least 6 Mbps
is recommended.
≥ Be sure to update the firmware when a firmware update notice is
displayed on the screen. If the firmware is not updated, you will not be
able to use the VIERA CAST function. (> 15)
≥ VIERA CASTTM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.
Communication Camera
TY-CC10W
Playback
– [BDT110] : When this unit is connected by wireless LAN
connection, connect the Communication Camera via the
USB port on the front of this unit.
≥ For operating method refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
1 Press [VIERA CAST].
≥ The video communication service can be accessed
directly by pressing [
] button, and NETFLIX can be
accessed directly by [NETFLIX] button.
≥ Message is displayed. Please read these instructions
carefully and then press [OK].
2 Press [3, 4, 2, 1] to select the item and
press [OK].
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN], colored buttons,
number buttons
VIERA CAST Home screen;
Weather
New York, NY
69°
TOMORROW
NW 10
mph
H
L
76°
56°
XXXXXX
XXXXXX
Featured Photos
Featured Videos
XXXXXXXXXXX
Hit Movies
MORE
BACK
Top TV Shows
Watch Instantly
Images are for illustration purposes, contents may
change without notice.
VQT3B58
23
DMP-BDT110_115_210_VQT3B58_eng.book 24 ページ
2010年12月8日 水曜日 午後4時39分
Playing contents saved
on other equipment
You can enjoy viewing a content saved on other equipment
(Windows 7 operating system, smartphone, etc.) connected
to the home network with this unit.
Preparation
1 Perform network connection and network settings of this
unit. ( 10, 13)
2 Perform Home Network settings of the connected
equipment.
For details about the setting and operation method of
connected equipment, and compatible equipment, refer
to the following Website and the operating instructions for
each item of equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Playing back contents on the
DLNA server (DLNA)
It is possible to play back the video, still pictures, and music
in the shared folder of the Windows 7 operating system.
Preparation
Perform steps 1 and 2.
3 Add the contents and folder to the Windows Media®
Player library.
≥ Playlist of Windows Media® Player can play back only
the contents that are stored in the libraries.
1 Press [HOME].
2 Press [3] to select “Network”.
3 Press [3] to select “Home Network”.
4 Press [3] to select “DLNA Client”.
≥ A list of equipment connected via the network is
displayed.
≥ This list can be updated by pressing [R] on the remote
control.
e.g.
DLNA Client
XXXXXX
OK
RETURN
Servers found on the network are displayed.
Please select one.
Update
5 Press [3, 4] to select the equipment to
playback the contents, and press [OK].
6 Press [3, 4, 2, 1] to select the item to
playback (folder), and press [OK].
≥ You may be able to use convenient functions
depending on the disc or content by pressing
[SUB MENU] or [DISPLAY].
≥ Control Panel is displayed once
Control Panel
the playback starts.
e.g.
EXIT
Operation can be performed
with [3, 4, 2, 1], [OK] and
[EXIT].
≥ Press [OK] if the Control Panel
is not displayed.
≥ Press [RETURN] to hide the Control Panel.
To exit from Home Network
Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].
24
VQT3B58
VQT3B58~Body_eng.fm
25 ページ 2010年12月7日 火曜日 午前9時42分
Play back the contents in the
DLNA server using DMC
It is possible to play back the video or still pictures in the
shared folder of the DLNA server by controlling with DLNA
DMC (Digital Media Controller) compatible equipment.
≥ Windows Media® Player and a smartphone that has the
compatible application serve as the DLNA server and the
DMC.
≥ Ensure that the router for your home network has adequate security
system to prevent unauthorized access.
≥ Menu structure will be different depending on the equipment connected
to this unit. Select the contents by repeating the operation.
≥ Depending on the contents and the connected equipment, playback
may not be possible.
≥ Items displayed in gray on the display cannot be played back by this
unit.
≥ This unit can be played back via connected equipment only when
controlled using DMC.
≥ Depending on the performance of the connected PC, video frames may
be dropped during playback, or video may not playback at all.
Preparation
Perform steps 1 and 2. (> 24)
3 Add the contents and folder to the libraries of the
Windows Media® Player or the smartphone, etc.
≥ Playlist of Windows Media® Player can play back only
the contents that are stored in the libraries.
4 Perform the “Remote Device Settings”. (> 33)
≥ The maximum number of equipment that can be
registered is 16.
Playback
1 Press [HOME].
2 Press [3] to select “Network”.
3 Press [3] to select “Home Network”.
4 Press [1] to select “Media Renderer”.
5 Operate the DMC compatible equipment.
To exit from Media Renderer screen
Press [HOME].
VQT3B58
25
DMP-BDT110_115_210_VQT3B58_eng.book 26 ページ
2010年12月2日 木曜日 午前9時18分
Linked operations with
the TV (VIERA Link “HDAVI Control
TM
TM
Easy control only with VIERA
remote control
”)
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) or amplifier/receiver under
“HDAVI Control”.
You can use this function by connecting the
equipment with an HDMI cable. See the operating
instructions for connected equipment for operational
details.
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.
1 Press [SUB MENU].
2 Select an item, then
press [OK].
Automatic input switching
Power on link
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the television is off, the
television will automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch
the television off.
Playing music continuously even after turning off power
to the television
When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later and an amplifier/receiver
supports VIERA Link.
1 While playing music
Press [SUB MENU].
2 Press [3, 4] to select “TV Power” and press [OK].
26
VQT3B58
Screen Aspect
Top Menu
Pop-up Menu
SUB
MENU
Preparation
1 Set “VIERA Link” to “On” ( 32). (The default setting is
“On”.)
2 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
Control Panel
OK
RETURN
≥ The sub menu may not appear
while the Top Menu for BD-Video or DVD-Video is
displayed.
≥ The buttons that you can use for this unit vary depending on the TV. For
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press
incompatible buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December,
2010) for Panasonic’s HDAVI Control compatible equipment. This
standard is compatible with Panasonic’s conventional HDAVI
equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
DMP-BDT110_115_210_VQT3B58_eng.book 27 ページ
2010年12月2日 木曜日 午前9時18分
Playback menu
Settings
Disc
1 Press [DISPLAY].
Signal Type
e.g., BD-Video
Subtitle
Subtitle Style
Menus
Items
Off
-
Main
1ENG
Angle
The recording method of
original video appears.
Soundtrack
Select the type of audio or
language.
Video
Select on/off of images. The
recording method of original
video appears.
Soundtrack
Select on/off of audio and
the language.
-
Settings
2 Press [3, 4] to select the menu and
Secondary
Video
press [1].
3 Press [3, 4, 2, 1] to select the item and
press [1].
4 Press [3, 4] to select the setting.
Some items can be changed by pressing [OK].
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
To exit the screen
Press [DISPLAY].
Subtitle
Depending on the condition of the unit (playing,
stopped, etc.) and media contents, there may be some
items that you cannot select or change.
Regarding Language : ( 38)
Subtitle Style
Turn the subtitle on/off, and change the language depending
on the media.
Select the subtitle style.
Audio channel
Playback
Signal Type
Video
Select the audio channel number.
( 17, “Changing audio”)
Angle
Select the number of the angle.
≥ Some items may be changed only on the disc specific menu. (
17)
Settings
Disc
Play
Video
Audio
Primary
Video
VQT3B58
27
DMP-BDT110_115_210_VQT3B58_eng.book 28 ページ
2010年12月2日 木曜日 午前9時18分
Progressive
Play
Select the method of conversion for progressive output to
suit the type of material being played.
Repeat Play
(Only when the elapsed time is being displayed on the unit’s
display.)
Select the item which you want to repeat. The items
displayed differ depending on the type of media.
Select “Off” to cancel.
≥ When the content is distorted change the settings from
“Auto” to “Video”.
24p
Movies and other material recorded on DVD-Video at 24p
are output at 24p.
≥ Only when you have selected “On” in “24p Output” ( 31).
Random
Select whether or not to play random.
Playback Information Window [BDT210]
Audio
Displays the following.
Sound Effects*1, *2
Audio/video attribute information of disc.
Settings status of “Digital Audio Output” (
*&/+
30).
HDMI output information.
Press [RETURN] to exit.
Pop-Out Level
(Only when “Full HD” is selected in “3D Type” ( 31).)
Pop-up position for the Playback menu or message screen
etc. can be adjusted during 3D playback.
Video
Picture
Select the picture quality mode during play.
≥ If you select “User”, you can make further adjustments.
Press [1] to select “Picture Adjustment” and press [OK].
≥ 3D NR:
Reduces the rough noise in the background to give a
greater feeling of depth.
When “24p Output” is set to “On”, this function may not
operate. ( 31)
≥ Integrated NR:
Smoothes block noise and reduces the smudging that
appears around contrasting sections of the picture.
Select the sound effect.
≥ Digital Tube Sound [BDT210] :
This feature gives you warm sound, like that produced by
a vacuum tube amplifier.
≥ Re-master :
This feature gives you brighter sound by increasing the
high frequency portion of the audio. (Discs recorded at
48 kHz or less)
Recommended setting
Chroma Process
The high-resolution processing of HDMI chroma signals
produces a high-resolution picture with rich picture quality.
Detail Clarity
The picture is sharp and detailed.
Super Resolution
Pictures of normal image quality are corrected to sharp
and detailed images when output as 1080i/1080p from
HDMI AV OUT.
28
VQT3B58
Pop and rock
Re-master 2
Jazz
Re-master 3
Classical
≥ Night Surround :
Enjoy a movie with powerful sound even when the volume
is kept low at night. The audio is set in such a way that it
can be heard easily.
Dialog Enhancer*2
The volume of the center channel is raised to make dialog
easier to hear.
High Clarity Sound [BDT210]
When connected to TV via the HDMI terminal for outputting
image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity
Sound” ( 30).
*1
*2
Advanced Settings
Re-master 1
Not every function can be set individually.
This function is effective for audio from the HDMI terminal or the
OPTICAL terminal only when “Digital Audio Output” is set to “PCM”
( 30). (However, in this case, audio is output as 2ch from the
OPTICAL terminal.)
DMP-BDT110_115_210_VQT3B58_eng.book 29 ページ
2010年12月8日 水曜日 午後4時39分
Setup menu
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
1 Press [HOME].
2 Press [OK] to select “Setup”.
3 Press [4] to select “Player Settings”.
Player Settings
Disc
Video
Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
3D BD-Video Playback
Audio
Display
TV / Device Connection
Network
Others
Select the playback method of 3D compatible video
software.
Audio Language
Choose the language for audio.
4 Press [3, 4] to select the menu and
press [OK].
5 Press [3, 4] to select the item and press
[OK].
If there are any other items, repeat these steps.
6 Press [3, 4, 2, 1] to select the option
and press [OK].
≥ If “Original” is selected, the original language of each disc
will be selected.
≥ Enter a code ( 38) with the number buttons when you
select “Other ¢¢¢¢”.
Subtitle Language
Choose the language for the subtitle.
≥ If “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that
language will automatically appear if available on that
disc.
≥ Enter a code ( 38) with the number buttons when you
select “Other ¢¢¢¢”.
Menu Language
≥ There may be differences in operation methods. If this happens, follow
the on-screen instructions for the operation.
Choose the language for the disc menus.
≥ Enter a code ( 38) with the number buttons when you
select “Other ¢¢¢¢”.
About the password
The following items use the same password.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” ( 32)
BD-Live Internet Access (
19)
You can restrict Internet access when BD-Live functions are
used.
≥ If “Allow (Limited)” is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
Subtitle Text
Select a suitable item according to the language used for
DivX [BDT210_for_Canada] or MKV subtitles text ( 18).
≥ This item is displayed only after playing back a file.
VQT3B58
29
Settings
OK
RETURN
VQT3B58~Body_eng.fm
30 ページ 2010年12月7日 火曜日 午前9時43分
Video
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Auto
Automatically selects the type of picture shown.
Field
Select if jittering occurs when “Auto” is selected.
Frame
Select if small text or fine patterns cannot be
seen clearly when “Auto” is selected.
Seamless Play
The chapter segments in playlists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the
chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
Audio
Downmix
Select the downmix system of multi-channel to 2-channel
sound.
≥ Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT and
DIGITAL AUDIO OUT.
≥ The audio will be output in “Stereo” in the following cases:
– AVCHD playback
– Playback of secondary audio (including the button click
sound).
7.1ch Audio Reformatting [BDT210]
Surround sound with 6.1ch or less is automatically
expanded and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the original
number of channels. (Note that in the case of 6.1ch audio,
playback will be at 5.1ch.)
≥ Audio reformatting is enabled in the following cases:
– When you have selected “PCM” in “Digital Audio
Output”.
– When the audio is Dolby Digital, Dolby Digital Plus,
Dolby TrueHD or LPCM.
– BD-Video playback
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
High Clarity Sound [BDT210]
When connected to TV via the HDMI terminal for outputting
image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
Playback menu to “On”. (> 28)
Digital Audio Output
Audio Delay
Dynamic Range Compression
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment cannot
decode the respective audio format. This unit decodes
the audio format and transmits to the connected
equipment.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 19)
≥ If “Off” is selected, the unit outputs the primary audio
only.
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥ If “On” is selected, the signals that are converted to
48 kHz are output.
≥ If “Off” is selected, and the connected equipment does not
support 96 kHz, the sound will not be output normally.
≥ Signals are converted to 48 kHz despite the settings in the
following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
30
VQT3B58
Synchronization between picture and sound is corrected by
adjusting the delay time of the audio output.
DMP-BDT110_115_210_VQT3B58_eng.book 31 ページ
2010年12月2日 木曜日 午前9時18分
Display
Status Messages
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
Choose whether to show status messages automatically.
Choose the language for menus and on-screen messages.
4:3 Pan &
Scan
The sides are cut off so
the picture fills the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
4:3
Letterbox
Black bands appear at the
top and bottom of the
picture.
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to HOME menu automatically.
≥ While playing and pausing, etc., this function is not
available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, Direct Navigator screen
switches to the other states automatically.
Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected the display is dimmed during playback
and bright not during playback.
License
Information about the software used by this unit is displayed.
TV / Device Connection
3D Settings
Press [OK] to show the following settings:
3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when
“Checker board” or “Side by side” is selected.
3D Playback Precautions
Set to display or hide the 3D viewing warning screen when
playing back the 3D compatible video software.
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:
16:9
Video is displayed as a 4:3 ratio image in the
center of the screen.
16:9 Full
Video is displayed as a horizontally
stretched 16:9 image.
HDMI Connection
Press [OK] to show the following settings:
HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output
resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p,
you need to connect the unit directly to 1080p
compatible HDTV (High Definition Television). If this unit
is connected to an HDTV through other equipment, it
must also be 1080p compatible.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then set “24p”
in “Video” ( 28) to “On”.
≥ When BD-Video images other than 24p are played,
images are output at 60p.
≥ 24p :
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
HDMI Color Mode
This setting is for selecting color-space conversion of the
image signal when the unit is connected using an HDMI
cable.
VQT3B58
31
Settings
On-screen Language
DMP-BDT110_115_210_VQT3B58_eng.book 32 ページ
2010年12月6日 月曜日 午前10時16分
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Select “Off” when the TV is connected to this unit via an
HDMI terminal, and this unit is also connected to other
devices, such as an amplifier/receiver via an OPTICAL
terminal.
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI
Control”.
Deep Color Output
This setting is for selecting whether to use Deep Color
output when a television that supports Deep Color is
connected.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Network
13)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select connection method.
Wireless Settings
This allows the Wireless router and connection settings to
be set and the current connection settings and connection
state to be checked when a wireless connection is used.
Connection Setting
The Wireless router connection wizard will be displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this setting
sets the connection speed.
≥ If you connect using the “Double Speed Mode
(40MHz)”, 2 channels use the same frequency band,
and there is consequently a greater risk of reception
interference. This can cause the connection speed to
drop or the connection to become unstable.
IP Address/DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
32
VQT3B58
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (
(VIERA CAST)
23)
Press [OK] to show the following settings:
VIERA Link
Network Easy Setting (
Proxy Server Settings
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥ Depending on contents, this function effect will not
work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥ Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
Network Drive Connection
It is possible to access the shared folder of equipment not
compatible with DLNA, such as the Windows XP operating
system, and play back video, still pictures, and music on
this unit.
For the setting and operation method of connected
equipment, refer to the following Website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
VQT3B58~Body_eng.fm
33 ページ 2010年12月10日 金曜日 午後9時41分
Remote Device Settings (> 25)
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate by DMC.
≥ If “On” is selected, “Quick Start” is fixed to “On”.
Setting Unit Name
Set the name of this unit to be displayed on the
connected equipment.
Registration Type
Automatic
Allow connection to all the equipment that
is accessing this unit.
Manual
Set the permission of the connection
individually for the equipment that is
accessing this unit.
Remote Device List
Registering/deregistering of the displayed equipment
can be performed when “Manual” in “Registration Type”
is selected.
MAC Address
Displays the MAC address of this unit.
Touch Free Sensor [BDT210]
Press [OK] to show the following settings:
Sensor (> 5)
Tray is opened and closed by waving your hands above
the top part of this unit.
Sound Level
Adjust the volume of the sensor.
DivX Registration (> 18) [BDT210_for_Canada]
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit and wireless LAN
module.
Firmware Update (> 15)
Press [OK] to show the following settings:
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
Others
You can update the firmware manually if a firmware
update is available.
Remote Control Code
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”
so compared to when the setting is “Off” the following will
occur.
– Idle power consumption will increase. (about the power
consumption > 39)
Settings
Easy Setting
You can execute basic settings. (“On-screen Language”,
“TV Aspect”, “Quick Start”, “Touch Free Sensor” [BDT210])
Restore Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “On-screen
Language”, “LAN Connection Mode”, “Wireless Settings”,
“IP Address/DNS Settings”, “Proxy Server Settings”, “Lock”,
“DVD-Video Ratings” and “BD-Video Ratings” etc. to the
default settings.
VQT3B58
33
DMP-BDT110_115_210_VQT3B58_eng.book 34 ページ
2010年12月2日 木曜日 午前9時18分
Troubleshooting guide
General operation
Before requesting service, please perform
the following steps.
To return to the factory preset.
R eference
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies.
( 15)
4
Make the following checks and visit our
website for more information.
For USA :
www.panasonic.com/help
Enter the model number.
For Canada :
http://www.panasonic.ca
4
Or visit our website to find a service
center.
You can find a service center near you easily on our
website.
Other support information:
“Customer Services Directory (United States and Puerto
Rico)” ( 41) or “Limited Warranty (Only for
CANADA)” ( 42).
The following do not indicate a problem with this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫ Unit doesn’t respond to remote
control or front panel buttons.
Press and hold [POWER Í/I] on the main unit for
3 seconds.
– If still unable to power the unit off, disconnect the power
cord, wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may have a problem.
1 While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “06 FTO” is displayed on
the unit’s display.
3 Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
34
VQT3B58
¾ Select “Yes” in “Restore Default Settings” in the Setup
menu. ( 33)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “08 FIN” is displayed on
the unit’s display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
This unit is turned off when the input for the
TV is switched.
¾ This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.
The remote control doesn’t work properly.
¾ Change the batteries in the remote control. ( 4)
¾ The remote control and main unit are using different
codes. If “SET ” is displayed on the unit’s display when
a button is pressed on the remote control, change the
code on the remote control. ( 33)
The TV tuner mode is not displayed when
the TV is switched on.
¾ This phenomenon may occur, depending on the TV
setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾ The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “03 VL” is displayed on
the unit’s display.
3 Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
DMP-BDT110_115_210_VQT3B58_eng.book 35 ページ
2010年12月8日 水曜日 午後4時39分
This unit does not recognize the USB
connection correctly.
¾ If USB device is connected to this unit while playing a
disc or in a video communication the connection will not
be recognized. Press [HOME] and reconnect USB
device.
¾ [BDT210] : USB memory and USB HDD are not
recognized via the rear USB port of this unit.
¾ Disconnect and reconnect the USB cable. If it still does
not recognize the connection, turn the power of this unit
off and on again.
¾ USB devices connected using a USB extension cable
other than the supplied with the Wireless LAN Adaptor
DY-WL10 (optional) [BDT110] or a USB hub may not be
recognized by this unit.
¾ If you connect USB HDD to this unit, use USB extension
cable that is supplied with the HDD.
¾ If two USB memory and USB HDD are connected
simultaneously, they will not be recognized by this unit.
3D video is not output.
¾ Is there a non-3D compatible amplifier/receiver
connected between this unit and a TV? ( 9)
¾ Are the settings on this unit and the TV correct? ( 20)
¾ Is the amplifier/receiver that is connected between this
unit and TV on?
3D video is not output correctly as 2D.
¾ Select “Set before play” in the Setup menu, and select
“2D Playback” in the setup screen displayed when
playing 3D discs. ( 29)
¾ Discs that have recorded titles with Side by side
(2 screen structure) and that can be enjoyed in 3D are
played back in accordance with the settings of the TV.
No subtitles.
¾ When progressive output is on, closed captions/subtitles
cannot be displayed.
The subtitles overlap closed captions
recorded on discs.
Picture
The images from this unit do not appear on
the television.
Picture is distorted.
¾ An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PRG” is displayed on
the unit’s display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. ( 31)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstream, select “Yes” in “Restore
Default Settings” and make proper settings. ( 33)
¾ When “3D BD-Video Playback” in the Setup menu is set
to “Automatic”, images may not be output depending on
the connection method. After removing the disc from this
unit, select “Set before play” in the Setup menu, and
select “2D Playback” in the setup screen displayed
when playing 3D discs. ( 29)
¾ Turn off the subtitles or turn off the closed caption
setting on the TV. ( 27)
A black band is displayed around the edge
of the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “TV Aspect” is set properly. ( 31)
¾ Adjust the aspect setting on the television.
Audio
Cannot switch audio.
¾ When connecting an amplifier/receiver using an
OPTICAL terminal or an HDMI terminal, you cannot
switch the audio if “Digital Audio Output” is set to
“Bitstream”. Set “Digital Audio Output” to “PCM”. ( 30)
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio Output”
settings. ( 9, 30)
¾ To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. ( 32)
Video is not output. [BDT210]
¾ Set “High Clarity Sound” in the Playback menu to “Off”
to use the VIDEO OUT terminal. ( 28)
Video is not output in high-definition.
Reference
¾ Confirm that “HDMI Resolution” in the Setup menu is set
properly. ( 31)
VQT3B58
35
DMP-BDT110_115_210_VQT3B58_eng.book 36 ページ
2010年12月2日 木曜日 午前9時18分
Playback
Network
Disc cannot be played.
I can’t connect to the network.
¾ The disc is dirty. (
¾ Confirm the network connection and settings.
( 10, 13, 32)
¾ Check the operating instructions for each device and
connect accordingly.
4)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
I can’t play back BD-Live.
¾ The SD card is write-protected. ( 7)
¾ Confirm that this unit is connected to the broadband
Internet. ( 10)
¾ Confirm the “BD-Live Internet Access” settings. ( 29)
¾ Confirm an SD Card is inserted into the SD Card slot.
( 16)
36
VQT3B58
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n (2.4 GHz or
5 GHz) Wireless router may solve the problem. If you
use 802.11n (2.4 GHz or 5 GHz) Wireless router, it is
necessary to set the encryption type to “AES”.
Simultaneous use with a microwave, cordless telephone
etc. at 2.4 GHz may result in connection interruptions or
other problems.
¾ On the “Wireless Settings” screen ( 32), the
continuous lighting of at least 4 “Reception” indicators is
the target for a stable connection. If 3 or fewer indicators
are lit or the connection is being interrupted, change the
position or angle of your Wireless router and see if the
connection state improves. If there is no improvement,
connect to a wired network and perform the “Network
Easy Setting” ( 13) again.
37 ページ 2010年12月10日 金曜日 午後9時30分
Messages
The following messages or service numbers appear on the
television or unit’s display when something unusual is
detected during startup and use.
On the television
Cannot play.
¾ You inserted an incompatible disc (Discs recorded in
PAL video, etc.).
Cannot display on this unit.
¾ You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not displayed and
re-insert the card.
No disc is inserted.
¾ The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit. For
example;
– BD-Video: During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
IP address is not set.
¾ The “IP Address” in “IP Address/DNS Settings” is “---.
---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and
“Default Gateway”. (Select the automatic address
acquisition if necessary.)
The current settings only offer minimal
wireless access point security and low
performance. It is recommended to change it
for better security.
¾ Authentication type for the Wireless LAN is set to “Open
system”, or the encryption type is set to “No encryption”.
It is recommended to encrypt for safety reasons. For
details, refer to the instructions of the Wireless router
being used. Encryption is required when playing back
video, etc., from DLNA compatible devices.
On the unit’s display
F99
¾ The unit fails to operate properly. Press [POWER Í/I]
on the main unit for 3 seconds to switch the unit to
standby, then switch back on.
HDMI ONLY
¾ Some BD-Video discs can only be output with HDMI.
NET
¾ While connecting to a network.
No READ
¾ The media is dirty or badly scratched. The unit cannot
play.
PLEASE WAIT
¾ The unit is carrying out an internal process. This is not a
malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.
REMOVE
¾ The USB device is drawing too much power. Remove
the USB device.
SET 
(“  ” stands for a number.)
¾ The remote control and main unit are using different
codes. Change the code on the remote control.
Press and hold [OK] and the
indicated number button at the
same time for more than
5 seconds.
U59
¾ The unit is hot.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing
the unit. Do not block the ventilation hole on the side of
the unit.
U72
U73
¾ The HDMI connection is not working properly.
– Turn the unit and TV off.
– Disconnect the HDMI cable between the player and
the TV.
H or F
(“  ” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting guide. If the
service number does not disappear, do the following.
1 Disconnect the plug from the AC outlet, wait a few
seconds, then reconnect it.
2 Press [POWER Í/I] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
START
¾ The system is being restarted during the firmware
update. Please do not turn off the unit.
UPD/
(“  ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off the unit.
FINISH
Reference
VQT3B58~Body_eng.fm
¾ The firmware update is complete.
No PLAY
¾ There is a viewing restriction on a BD-Video or
DVD-Video. (> 29)
VQT3B58
37
DMP-BDT110_115_210_VQT3B58_eng.book 38 ページ
2010年12月2日 木曜日 午前9時18分
Supplemental information
∫ Display languages list
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
∫ Language code list
Language Code Language Code Language Code
Abkhazian:
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Amharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6589
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian:
7577
Catalan:
6765
Chinese:
9072
Corsican:
6779
Croatian:
7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto:
6979
Estonian:
6984
Faroese:
7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician:
7176
Georgian:
7565
German:
6869
Greek:
6976
Greenlandic:
7576
Guarani:
7178
38
VQT3B58
Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
Lingala:
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185
Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic:
7168
Serbian:
8382
Serbo-Croatian: 8372
Shona:
8378
Sindhi:
8368
Singhalese:
8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese:
8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen:
8475
Twi:
8487
Ukrainian:
8575
Urdu:
8582
Uzbek:
8590
Vietnamese:
8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085
39 ページ 2010年12月10日 金曜日 午後1時29分
Specifications
Signal system:
NTSC
Operating temperature range:
i5 oC to i35 oC (i41 oF to i95 oF)
Operating humidity range:
10 % to 80 % RH (no condensation)
Video output:
1.0 Vp-p (75 ≠)/Pin jack:1 system
Audio output:
2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :
2 channel:1 system
Digital audio output:
Optical digital output (Optical terminal)
HDMI AV output:
Type A (19 pin) : 1 system
This unit supports “HDAVI Control 5” function.
SD card slot:
Connector : 1 system
USB slot:
USB2.0 : 2 system
Ethernet:
10BASE-T/100BASE-TX : 1 system
WLAN [BDT210]
Antenna:
Tx 1, Rx 2
Standard Compliance:
IEEE802.11n / IEEE802.11a / IEEE802.11g /
IEEE802.11b
Transmission system:
MISO-OFDM system, OFDM system, DSSS
system
Transfer rate (standard)*:
IEEE802.11n: Tx Max. 150 Mbps, Rx Max.
300 Mbps
IEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b:
Max. 11 Mbps
Access Mode:
Infrastructure mode
Security:
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
(This unit supports WPA and WPA2 encryption.)
LASER Specification
Class I LASER Product:
Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:No hazardous radiation is emitted with the
safety protection
Power supply:
AC 120 V, 60 Hz
Power consumption:
Approx. 9.9 W
Power consumption in standby mode: Approx. 0.1 W
Power consumption in quick start standby mode:
Approx. 3.2 W
Dimensions (WkDkH) Including the projecting parts:
430 mmk185 mmk35 mm
(Approx. 16 15/16zk7 5/16zk1 7/16z)
Mass (Weight):
Approx. 1.6 kg (3.52 lbs)
Specifications are subject to change without notice.
File format
File format
MP3
JPEG
Extension
“.MP3”, “.mp3”
ID3 tags (Only titles and
the names of artists)
“.JPG”, “.jpg”
≥ MOTION JPEG and
Progressive JPEG is not
supported
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
“.DIVX”, “.divx”,
“.AVI”, “.avi”
Subtitles text
DivX
file
[BDT210_for_Canada]
“.SRT”, “.srt”,
“.SUB”, “.sub”,
“.TXT”, “.txt”
“.MKV”, “.mkv”
MKV
Reference
Subtitles text
file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
“.ASS”, “.ass”
≥ The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some DivX and MKV
file may not be played
back, depending on the
video resolution and
frame rate condition.
≥ With certain recording states and folder structures, the
play order may differ or playback may not be possible.
Audio information
The audio output differs depending on which terminals are
connected to the amplifier/receiver, and the settings on the
unit. (> 30, Digital Audio Output)
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
* Transfer rates are theoretical values; however, actual communication
rate will vary according to communication environment or connected
equipment.
Terminal
“Digital Audio Output”
“Bitstream”
HDMI AV Outputs using original
OUT
audio*1
OPTICAL
*1
*2
*3
Dolby Digital/
DTS Digital Surround
“PCM”
BD-Video :
7.1ch PCM*1*2*3
DVD-Video :
5.1ch PCM
Down-mixed 2ch
PCM
When “BD-Video Secondary Audio” is set to “On”, the audio will be
output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.
[BDT110] : The maximum possible number of Dolby sound is 5.1ch
PCM.
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on
the DTS, Inc. specifications.
VQT3B58
39
Reference
VQT3B58~Body_eng.fm
VQT3B58~Body_eng.fm
40 ページ 2010年12月13日 月曜日 午後5時36分
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States
and other countries.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
YouTube and Picasa are trademarks of Google, Inc.
Skype, associated trade marks and logos and the “
marks of Skype Limited.
Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195;
7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents
issued & pending.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD
Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.
This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial use
of a consumer to (i) encode video in compliance with the AVC Standard
and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1
Video that was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video provider
licensed to provide AVC/VC-1 Video. No license is granted or shall be
implied for any other use. Additional information may be obtained from
MPEG LA, LLC.
See http://www.mpegla.com.
” logo are trade
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed under the
GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to the terms
and conditions of GPL v2 and LGPL v2.1, as the case may be at
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are copyrighted by
several individuals. Please refer to the copyright notice of those
individuals at
http://www.am-linux.jp/dl/AWBPP11
The GPL/LGPL software is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to
any third party who contacts us at the contact information provided
below, for a charge no more than our cost of physically performing
source code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest@am-linux.jp
HDAVI Control™ is a trademark of Panasonic Corporation.
VIERA Link™ is a trademark of Panasonic Corporation.
VIERA CAST™ is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
Source code is also freely available to you and any other member of
the public via our website below.
http://www.am-linux.jp/dl/AWBPP11
For the software categorized as (5) includes as follows.
1. This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org/)
2. This product includes software developed by the University of
California, Berkeley and its contributors.
3. FreeType code.
4. The Independent JPEG Group's JPEG software.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
gSOAP Public License 1.3
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic
Corporation and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
Inc. and are used under license.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
40
VQT3B58
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van
Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY
GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
DMP-BDT110_115_210_VQT3B58_eng.book 41 ページ
2010年12月8日 水曜日 午後4時39分
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
modification, introduction of sand, humidity or liquids, commercial use
such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of
God.
Mail-In Service
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied
warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this
product develops during or after the warranty period, you may contact
your dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Customer Services Directory (United States and Puerto Rico)
Product or Part Name
Parts
Labor
Blu-ray Disc Player, Portable
Blu-ray Disc Player
1 year
90 days
Blu-ray Home Theater System
1 year
1 year
DVD Player, Portable DVD Player 1 year
90 days
DVD Recorder
90 days
1 year
Rechargeable Batteries (pack),
10 days
DVD-RAM Disc (defective exchange)
Not
Applicable
During the “Labor” warranty period there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts.
This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold “as is”.
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
panacare@us.panasonic.com
When shipping the unit, carefully pack, include all accessories, and send
it prepaid, adequately insured and preferably in the original carton. If
Lithium Ion batteries are shipped by air the package must be labeled
“Contains Lithium Ion Battery (No lithium metal)”. Damaged batteries are
prohibited from shipment by US Mail. Batteries must be securely packed
in a manner to prevent short-circuiting and a package cannot contain
more than 3 Lithium Ion batteries. Include a letter detailing the complaint,
a return address and provide a daytime phone number where you can be
reached. A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage,
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY:
1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
For hearing or speech impaired TTY users, TTY:
1-866-605-1277
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
As of November 2009
TELEPHONE NUMBER
VQT3B58
41
Reference
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials
or workmanship, Panasonic Consumer Electronics Company (referred
to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent
value product, or (c) refund your purchase price. The decision to
repair, replace or refund will be made by the warrantor.
VQT3B58~Body_eng.fm
42 ページ 2010年12月10日 金曜日 午前9時29分
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a
period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The
decision to repair, replace or refund will be made by Panasonic Canada Inc.
Technics Audio Product - One (1) year, parts and labour
Panasonic BD/DVD Product - One (1) year, parts and labour
Panasonic Audio Receivers - One (1) year, parts and labour
Home Theater Systems Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand
product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which
product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER
PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and
tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which
are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse,
neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial
use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an
Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of
or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for
illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the
exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you
specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre:
Telephone #: 1-800-561-5505
Fax #: (905) 238-2360
Email link: “Support # contact us # email” on www.panasonic.ca
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
42
VQT3B58
VQT3B58~Body_eng.fm
43 ページ 2010年12月8日 水曜日 午後8時21分
Referencia rápida en
español (Spanish Quick Reference)
Reproducción básica
Preparación
Encienda el televisor y seleccione la entrada de vídeo
adecuada en el televisor.
Conexiones básicas
1 Pulse [Í POWER] para encender la
unidad.
Conexión a un televisor
compatible con HDMI
Después de conectar su nuevo reprodutor y pulsar el
botón de encendido, aparecerá la pantalla de la
configuración básica.
2 Inserte el medio.
HDMI IN
UNICATION
AMERA
Inicia la reproducción
Cable HDMI
10BASE-T/100BASE-TX
Pulse [1PLAY].
LAN
Conexión a un televisor con
un cable para audio/vídeo
Parada
Cable de audio/vídeo
Función de reanudación de la reproducción
Pulse [1PLAY] para reiniciar la reproducción desde esta
posición.
≥ La posición se borra si se abre la bandeja o se pulsa
[∫STOP] varias veces para visualizar “STOP” en el visor
de la unidad.
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
10BASE-T/100BASE-TX
R
L
AUDIO IN VIDEO IN
LAN
10BASE-T/100BASE-TX
COMMUNICATION
CAMERA
Pulse [∫STOP].
La posición de detención se memoriza.
LAN
Conexión a un televisor compatible
con HDMI y a un amplificador/
receptor compatible con HDMI
Pausa
Pulse [;PAUSE].
≥ Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la
reproducción.
HDMI IN
Búsqueda/Cámara lenta
Cable HDMI
E-TX
HDMI IN
(ARC)
Amplificador/Receptor
Cable HDMI
Cámara lenta
Durante la pausa, pulse [SEARCH6] o [SEARCH5].
≥ BD-Video y AVCHD: Sólo dirección en avance
[SEARCH5].
HDMI OUT
(ARC)
Conecte el cable de
alimentación de CA por último
La velocidad aumenta hasta 5 pasos.
≥ Pulse [1PLAY] para recuperar la velocidad de
reproducción normal.
A una toma de corriente doméstica
Salto
AC IN
Cable de alimentación de CA
(incluido)
10BASE-T/100BASE-TX
COMMUNICATION
CAMERA
LAN
≥ Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Durante la reproducción o la pausa, pulse [:] o
[9].
Salta hasta el título, capítulo o pista que desee reproducir.
≥ Cada pulsación aumenta el número de saltos.
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, aprox. 0,1 W). Para ahorrar energía
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.
VQT3B58
43
Reference
Altavoces multicanal
Búsqueda
Durante la reproducción, pulse [SEARCH6] o
[SEARCH5].
≥ Música y MP3: La velocidad está fija en un paso.
VQT3B58~BCover_eng.fm
44 ページ 2010年12月14日 火曜日 午前10時20分
Index
A Audio
Changing audio . . . . . . . . . . . . 17
Language . . . . . . . . . . . . . . 27, 29
B BD-Live . . . . . . . . . . . . . . . . . . . . 19
C Chapter . . . . . . . . . . . . . . . . . . . . 18
D DivX . . . . . . . . . . . . . . . . . . . . 18, 39
DLNA . . . . . . . . . . . . . . . . . . . . . . 24
F File format. . . . . . . . . . . . . . . . . . 39
Firmware update . . . . . . . . . . . . 15
L LAN . . . . . . . . . . . . . . . . . . . . . . . 10
Language
Audio . . . . . . . . . . . . . . . . . 27, 29
Menu . . . . . . . . . . . . . . . . . . . . 29
On-screen. . . . . . . . . . . . . . . . . 31
Soundtrack . . . . . . . . . . . . . . . . 27
Subtitle . . . . . . . . . . . . . . . . 27, 29
MMedia Renderer. . . . . . . . . . . . . . 25
NNetwork
Connection . . . . . . . . . . . . . . . 10
Setting . . . . . . . . . . . . . . . . 13, 32
P Playlists . . . . . . . . . . . . . . . . . . . 18
Pop-up menu . . . . . . . . . . . . . . . 17
Q Quick Start . . . . . . . . . . . . . . . . . 33
R Re-master. . . . . . . . . . . . . . . . . . 28
Restore Default Settings . . . . . 33
Resume play function . . . . . . . . 17
S Subtitle . . . . . . . . . . . . . . . . . . . . 27
U USB device . . . . . . . . . . . . . . . . . 7
V VIERA CASTTM . . . . . . . . . . . . . 23
VIERA LinkTM
“HDAVI ControlTM” . . . . . . . . . . . . 26
W Wireless LAN . . . . . . . . . . . . . . . 10
®
As an ENERGY STAR Partner, Panasonic
has determined that this product meets the
®
ENERGY STAR guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
C Panasonic Corporation 2010
Printed in China
24p . . . . . . . . . . . . . . . . . . . . . 28, 31
3D. . . . . . . . . . . . . . . . . . . . . . . . . 20
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
pr
VQT3B58
F1210SK0