- No category
advertisement
◉
Touch to zoom
Universal pole bracket UPB PAGE 10 Installation on all types of poles Wood metal concrete Description The UPB bracket is manufactured from aluminium alloy with correspondingly high mechanical strength. Its unique patented design has been developed to propose a universal fitting covering all installation situations on wooden, metal or concrete poles : • • • • • Suspension of running out rollers • Jointing points Stay systems • Angle points Cross-arm installation • Derivation points Dead-ending of single, double or triple parallel lines. Dead-ending of several drop wires. Installation With steel bands The UPB bracket can be installed on any type of pole – drilled or undrilled – with two 20x0.7 mm stainless steel bands SB207 plus two buckles B20 (check our pole banding products). Usually allow two bands of one meter each per bracket. Installing with bolt With bolts If the top of the pole is drilled (wooden poles, occasionally concrete poles) the UPB bracket can also be secured with a 14 or 16 mm bolt. The bolt length should be at least equal to the pole diameter + 50 mm (bracket thickness). Check our bolts. Installing with steel bands Characteristics Universal pole bracket UPB Installation Max. working loads (Safety factor = 3) Material Weight Packaging unit 06/06 • With two 20 mm or 3/4 inch steel bands • With one 14 or 16 mm dia. Bolt • Dead-ending F1 500 daN – 1100 lbs 300 daN – 650 lbs • Dead-ending F2 930 daN – 2050 lbs • Guying / stay F3 200 daN – 450 lbs • Service lines F4 500 daN – 1100 lbs • Angles F5 Aluminium alloy 0,2 kg - 0.44 lbs. 30 No contractual pictures. Telenco reserves the right to modify specifications without any prior notice
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project