EDS-408A-3S-SC-48 Series Datasheet (EDS-408A-3S-SC-48_Series

Industrial Ethernet Solutions

EDS-408A-3S-SC-48 Series

8-port entry-level managed Ethernet switches

›

Plug-n-Play Turbo Ring and Turbo Chain with fast recovery time

›

(under 20 ms)

IGMP Snooping, QoS, IEEE 802.1Q VLAN, SNMPv1/v2c/v3, RMON

›

› supported

Automatic warning by exception through e-mail, relay output

User-friendly web-based configuration and management

ABC-01 (Automatic Backup Configurator) for system configuration backup (optional accessory)

1

Introduction

The EDS-408A-3S-SC-48 is an 8-port managed Ethernet switch designed especially for industrial applications. The switch supports a variety of useful management functions, such as Turbo Ring, Turbo

Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth

Features and Benefits

•

•

•

•

•

IPv6 Ready logo awarded (IPv6 Logo Committee certified)

DHCP Option 82 for IP address assignment with different policies

Modbus/TCP industrial Ethernet protocol supported

Turbo Ring and Turbo Chain (recovery time < 20 ms at full load), and RSTP/STP (IEEE 802.1w/D)

IGMP snooping and GMRP for filtering multicast traffic

Specifications

Technology

Standards:

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X) and 100BaseFX

IEEE 802.3x for Flow Control

IEEE 802.1D-2004 for Spanning Tree Protocol

IEEE 802.1w for Rapid STP

IEEE 802.1p for Class of Service

IEEE 802.1Q for VLAN Tagging

Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/

Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog, DHCP

Option 66/67/82, BootP, LLDP, Modbus/TCP, IPv6, NTP Server/Client

MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP

MIB, RMON MIB Group 1, 2, 3, 9

Flow Control: IEEE 802.3x flow control, back pressure flow control

Switch Properties

MAC Table Size: 8 K

Packet Buffer Size: 1 Mbit

Interface

Fiber Ports: 100BaseFX ports (SC connector)

RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection

Console Port: RS-232 (RJ45 connector)

DIP Switches: Turbo Ring, Master, Coupler, Reserve

LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL,

10/100M

Alarm Contact: 1 relay output with current carrying capacity of

1 A @ 24 VDC management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-408A-3S-SC-48.

•

•

•

•

•

•

Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning

QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism

RMON for efficient network monitoring and proactive capability

SNMPv1/v2c/v3 for different levels of network management security

Bandwidth management to prevent unpredictable network status

Port mirroring for online debugging

Optical Fiber

100BaseFX

Multi-mode Single-mode

Wavelength

Max. TX

Min. TX

RX Sensitivity

Link Budget

1300 nm

-10 dBm

-20 dBm

-32 dBm

1310 nm

0 dBm

-5 dBm

-34 dBm

Typical Distance

12 dB

5 km a

4 km b

29 dB

40 km c

Saturation -6 dBm -3 dBm a. 50/125 μm, 800 MHz*km fiber optic cable b. 62.5/125 μm, 500 MHz*km fiber optic cable c. 9/125 μm single-mode fiber optic cable

Power Requirements

Input Voltage: ±24/±48 VDC (-60 to -19 VDC or 19 to 60 VDC), redundant dual inputs (mixing power polarity systems is prohibited)

Input Current: 0.32A @ 24V

Overload Current Protection: Present

Connection: 1 removable 6-contact terminal block

Reverse Polarity Protection: Present

Physical Characteristics

Housing: Metal, IP30 protection

Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)

Weight: 890 g

Installation: DIN-Rail mounting, wall mounting (with optional kit) w w w. m o x a . c o m i n f o @ m o x a . c o m

Industrial Ethernet Solutions

Environmental Limits

Operating Temperature:

Standard Models: 0 to 60°C (32 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

Safety: UL 508 (Pending)

EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,

EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,

EN 61000-4-6 (CS) Level 3, EN 61000-4-8

Dimensions

30.0 mm

(1.2 in)

9.0 mm

(0.4 in)

13.1 mm

(0.5 in)

15.1 mm

(0.6 in)

25.4 mm

(1.0 in)

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Note: Please check Moxa’s website for the most up-to-date certification status.

MTBF (meantime between failures)

Time: 363,000 hrs

Database: Telcordia (Bellcore), GB

Warranty

Warranty Period: 5 years

Details: See www.moxa.com/warranty

46.0 mm (1.8 in)

44.0 mm (1.7 in)

105.0 mm (4.1 in)

Side View

53.6 mm (2.1 in)

Front View

7.8 mm

(0.3 in)

30.5 mm

(1.2 in)

7.8 mm

(0.3 in)

45.8 mm (1.8 in)

Rear View DIN-Rail/Panel

Mounting Kit

Ordering Information

Available Models

Standard Temperature

(0 to 60˚C)

EDS-408A-3S-SC-48

Wide Temperature

(-40 to 75˚C)

EDS-408A-3S-SC-48-T

10/100BaseT(X)

5

Multi-mode,

SC Connector

–

Port Interface

100BaseFX

Multi-mode,

ST Connector

–

Optional Accessories (can be purchased separately)

MXview: Moxa industrial network management software with 50, 100, 250, 500, or 1000 nodes

EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices

ABC-01: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C operating temperature

DR-4524/75-24/120-24: 45/75/120 W DIN-Rail 24 VDC power supplies

MDR-40-24/60-24: 40/60 W DIN-Rail 24 VDC power supplies, -20 to 70°C operating temperature

WK-46: Wall mounting kit

RK-4U: 4U-high 19” rack mounting kit

Single-mode,

SC Connector

3

2 © Moxa Inc. All Rights Reserved. Updated Dec. 28, 2010. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.