- No category
advertisement
11/24/2009 14:10
DNA/DNR-SOE-648
48-Channel SOE Recorder Interface
..............................................................................................................................................
• DNR-SOE-648 for use with RACKtangle chassis
• DNA-SOE-648 for use with Cube chassis
• 250 uS time stamp resolution
• 0 - 140 VDC input transition levels
• Programmable hysteresis
• 350 VAC isolation
10-Year
Availability
Guarantee
• Expandible from 1 channel to over 5000
• Includes DNR/DNA board, cable and screw terminal panel
• Fully compatible with all other DNA/DNR series I/O
[DNR-SOE-648 RACKtangle board shown]
The DNA-SOE-648 is designed for use in “Cube” I/O chassis while the DNR-SOE-648 is for use in the RACKtangle™ chassis.
General Description:
The DNA/DNR-SOE-648 is a 48 channel, high performance Sequence of
Events recorder input interface. The DNA-SOE-648 and DNR-SOE-648 are compatible with UEI’s popular “Cube” and RACKtangle I/O chassis respectively, The DNx-SOE-648 system includes the RACKtangle/Cube
I/O board as well as screw terminal panel and cable. Systems requiring more than 48 channels are easily accommodated by simply adding more DNx-SOE-648s and if necessary, additional Cubes or RACKtangles.
SOE systems requiring 5000 or even more channels are easily designed and deployed using DNx-SOE-648 based systems.
System sample rate and time stamp resolution is user programmable from 250 µS up to 16.4 seconds in 250 µS increments. Duration of the recorded data is limited only by the hard drive of the host PC in
PowerDNA mode, or by the size of SD card or USB drive when used in a UEIPAC chassis.
The DNx-SOE-648 accepts inputs from 0 to 140 VDC. The switch levels are software selectable anywhere in the range with 100 mV resolution.
The system offers programmable hysteresis over the full input range.
The board provides user programmable debounce durations between
5 and 500 ms. Each board provides 350 Vrms isolation between the I/O and the cube and other installed I/O layers. All inputs are overvoltage protected from -25 to +200 VDC, and against ESD.
The DNx-SOE-648 includes software drivers supporting all popular operating systems including: Windows, Linux, QNX, VXWorks, RTX, and most other popular Real-Time Operating Systems. Windows users may take advantage or the powerful UEIDAQ Framework which provides a simple and complete software interface to all popular Windows programming language and data acquisition and control applications
(e.g. LabVIEW, DASYLab, MATLAB).
Technical Specifications:
Number of channels 48 (easily expandible by adding additional
DNx-SOE-648 boards)
Time stamping resolution 250 µS
Sample/Time stamp range 250 µS to 16.4 seconds
Recorder session duration
Input High/On voltage
Limited only by hard-disk size
Programmable from 0 to 140 VDC
(default: 60 V)
Input Low/Off voltage
Hysteresis
Level selection accuracy
Switch debounce interval
Input impedance
Input protection
Input Isolation
Power dissipation
Operating Temp. Range
Operating Humidity
Vibration IEC 60068-2-6
IEC 60068-2-64
Shock IEC 60068-2-27
Programmable from 0 to 140 VDC
(default: 6.25 V)
Programmable, 0 to 140 VDC
(default 51.25 VDC)
± 100 mV programmable, 5 to 500 mS
> 200 k Ohm.
± 350 VDC, and ESD
350 Vrms
2 W
Tested -40 to +85 °C
95%, non-condensing
5 g, 10-500 Hz, sinusoidal
5 g (rms), 10-500 Hz, broad-band random
50 g, 3 ms half sine, 18 shocks @ 6 orientations
30 g, 11 ms half sine, 18 shocks @ 6 orientations
MTBF >475,000 hours
Unlike many SOE systems that provide limited deployment flexibility, the DNx-SOE-648 offers the ability to do everything a standard
SOE recorder does, plus much more. In addition to logging and timestamping events, an UEI based system can be configure to log many other parameters including temperature, pressure, strain, vibration and more. It may also acquire data from serial I/O devices, or provide data directly via the internet . Finally, an SOE-648 system can be configured to provide control capabilities and in particular is an ideal primary or backup initiator of emergency shut down procedures.
Block Diagram:
62 conductor cable
DIn47
...
DIn0
Control Logic
DNx series board in Cube/RACKtangle
Ordering Information:
Product Description
DNR-SOE-648
DNA-SOE-648
Tel: (508) 921-4600
48-channel Sequence Of Event recorder for DNR series RACKtangles. (Includes RACKtangle I/O board, cable and screw terminal panel)
48-channel Sequence Of Event recorder for DNA series Cubes. (Includes Cube I/O board, cable and screw terminal panel)
United Electronic Industries, Inc.
1 http://www.ueidaq.com
Fax: (508) 668-2350
Single Channel Diagram:
PLEVEL
33K
DIN 0
. . .
DINx
. . .
DIN 47
Board may be configured as pull up, or pull down by connecting PLEVEL to user
VCC or ground respectively
. . .
. . .
MUX
USER_GND
A/D Converter
Pinout Diagram:
SHIELD
Pin Signal
1 PLEVEL 0-23
2 Rsvd
3 Rsvd
4 Rsvd
5 DIn 45
6 DIn 42
7 DIn 39
8 DIn 36
9 DIn 33
10 DIn 30
11 DIn 27
12 DIn 24
13 DIn 21
14 DIn 18
15 DIn 15
16 DIn 12
17 DIn 9
18 DIn 6
19 DIn 3
20 DIn 0
21 NC
NC - No Connection
Rsvd - Reserved
United Electronic Industries, Inc.
Tel: (508) 921-4600
Pin Signal
22 PLEVEL 24-47
23 Gnd
24 Gnd
25 NC
26 DIn 46
27 DIn 43
28 DIn 40
29 DIn 37
30 DIn 34
31 DIn 31
32 DIn 28
33 DIn 25
34 DIn 22
35 DIn 19
36 DIn 16
37 DIn 13
38 DIn 10
39 DIn 7
40 DIn 4
41 DIn 1
42 Gnd
Pin Signal
43 Gnd
44 NC
45 Gnd
46 DIn 47
47 DIn 44
48 DIn 41
49 DIn 38
50 DIn 35
51 DIn 32
52 DIn 29
53 DIn 26
54 DIn 23
55 DIn 20
56 DIn 17
57 DIn 14
58 DIn 11
59 DIn 8
60 DIn 5
61 DIn 2
62 NC
2 http://www.ueidaq.com
Fax: (508) 668-2350
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project