Winzer Purple Guard Battery Protector

--------------------------------------------------------M A T E R I A L
S A F E T Y
D A T A
S H E E T
----------------------------------------------------------------------------------------------------------------------------------SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
---------------------------------------------------------------------------
PRODUCT NAME
: PURPLE-GUARD BATTERY PROTECTOR
IDENTIFICATION NUMBER: 891.525
DATE PRINTED: 07/27/07
MSDS NUMBER
: 891.525.7
MANUFACTURED FOR:
WINZER CORPORATION
10560 Markison Road
Dallas, Texas 75238
800-527-4126
INFOTRAC EMERGENCY PHONE #: (800) 535 5053
PREPARER: CUSTOMER SERVICE, PREPARE DATE: 07/28/07
--------------------------------------------------------------------------SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
--------------------------------------------------------------------------WT/WT %
ITEM
------------ CHEMICAL NAME ------------CAS NUMBER
LESS THAN
--------------------------------------------------------------------------01
02
03
04
05
N-HEXANE
PROPANE/ISOBUTANE/N-BUTANE
PROPANE/ISOBUTANE/N-BUTANE
METALWORKING FLUID ADDITIVE
STODDARD SOLVENT
110-54-3
68476-86-8
68476-86-8
MIXTURE
8052-41-3
45.0
25.0
15.0
5.0
5.0
%
%
%
%
%
---------------------- EXPOSURE LIMITS -------------------ACGIH
OSHA
COMPANY
ITEM TLV-TWA
TLV-STEL
PEL-TWA
PEL-CEILING TLV-TWA
SKIN
--------------------------------------------------------------------------01
02
03
04
05
50 PPM
1000 PPM
1000 PPM
100 PPM
100 PPM
N.E.
N.E.
N.E.
N.E.
N.E.
50 PPM
800 PPM
800 PPM
100 PPM
100 PPM
(See Section 16 for abbreviation legend)
500 PPM
N.E.
N.E.
500 PPM
N.E.
N.E.
N.E.
N.E.
N.E.
N.E.
YES
YES
YES
NO
NO
Page 2
--------------------------------------------------------------------------SECTION 3 - HAZARDS IDENTIFICATION
--------------------------------------------------------------------------*** EMERGENCY OVERVIEW ***: Vapors irritating to eyes and respiratory
tract. Vapors may cause flash fire or explosion.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can cause pain, tearing, reddening and swelling
accompanied by a stinging sensation and/or a feeling like that of fine dust
in the eyes.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can
result in defatting and drying of the skin which may result in skin
irritation and dermatitis (rash).
EFFECTS OF OVEREXPOSURE - INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes in heart rate and cyanosis may result
from over-exposure to vapor or skin exposure. Prolonged inhalation may be
harmful.
EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal
if swallowed. If a Corrosive product, may cause severe and permanent
damage to mouth, throat and stomach.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Overexposure may cause nervous
system damage. Overexposure may cause lung damage. Overexposure may cause
kidney damage. May cause liver disorder (e.g., edema, proteinuria) and
damage.
PRIMARY ROUTE(S) OF ENTRY:
ABSORPTION INGESTION
INHALATION
SKIN CONTACT
EYE CONTACT
SKIN
--------------------------------------------------------------------------SECTION 4 - FIRST AID MEASURES
--------------------------------------------------------------------------FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water.
medical attention, if irritation persists.
FIRST AID - SKIN CONTACT: Wash with soap and water.
if irritation develops or persists.
Get
Get medical attention
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Get
immediate medical attention.
FIRST AID - INGESTION: Get medical attention immediately. If swallowed,
do NOT induce vomiting. Give victim a glass of water or milk. Call a
physician or poison control center immediately. Never give anything by
mouth to an unconscious person.
Page 3
--------------------------------------------------------------------------SECTION 5 - FIRE FIGHTING MEASURES
--------------------------------------------------------------------------FLASH POINT: -156 F
(PENSKY-MARTENS C.C.)
LOWER EXPLOSIVE LIMIT:
UPPER EXPLOSIVE LIMIT:
0.7 %
9.5 %
AUTOIGNITION TEMPERATURE: ND
EXTINGUISHING MEDIA:
WATER FOG
DRY CHEMICAL
CO2
FOAM
ALCOHOL FOAM
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors can travel to a source of
ignition and flash back. "Empty" containers retain product residue (liquid
and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE,
SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND
CAUSE INJURY OR DEATH. Empty drums should be completely drained, properly
bunged and promptly returned to a drum reconditioner, or properly disposed
of.
SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if
exposed to heat (fire). As in any fire, wear self-contained breathing
apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full
protective gear.
--------------------------------------------------------------------------SECTION 6 - ACCIDENTAL RELEASE MEASURES
--------------------------------------------------------------------------STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill
with inert material (e.g. dry sand or earth), then place in a chemical
waste container.
--------------------------------------------------------------------------SECTION 7 - HANDLING AND STORAGE
--------------------------------------------------------------------------HANDLING:
STORAGE:
Wash thoroughly after handling.
Keep away from heat, sparks and flame.
Keep from freezing.
--------------------------------------------------------------------------SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to
control any air contaminants to within their TLVs during the use of this
product.
RESPIRATORY PROTECTION: A NIOSH/MSHA approved air purifying respirator
with an organic vapor cartridge or canister may be permissible under
certain circumstances where airborne concentrations are expected to exceed
Page 4
--------------------------------------------------------------------------SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------exposure limits. Protection provided by air purifying respirators is
limited. Use a positive pressure air supplied respirator if there is any
potential for an uncontrolled release, exposure levels are not known, or
any other circumstances where air purifying respirators may not provide
adequate protection.
SKIN PROTECTION: Where contact is likely, wear chemical resistant gloves,
a chemical suit, rubber boots, and chemical safety goggles plus a face
shield.
EYE PROTECTION:
face shield.
Wear safety glasses with side shields (or goggles) and a
OTHER PROTECTIVE EQUIPMENT:
BE FOLLOWED.
STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD
HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated
clothing and wash before reuse. Use only in a well ventilated area.
Follow all MSDS/label precautions even after container is emptied because
they may retain product residues. Avoid prolonged or repeated contact with
skin. Avoid breathing vapors from heated material. Avoid contact with
eyes, skin, and clothing.
--------------------------------------------------------------------------SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
--------------------------------------------------------------------------BOILING RANGE
: -43 - 387 F
VAPOR DENSITY
:
ODOR
: SOLVENT
ODOR THRESHOLD :
APPEARANCE
: PURPLE
EVAPORATION RATE:
SOLUBILITY IN H2O : NEGLIGIBLE
FREEZE POINT
: 32
SPECIFIC GRAVITY:
VAPOR PRESSURE
: 45-60
pH @ 0.0 %
:
PHYSICAL STATE
: AEROSOL
VISCOSITY
:
COEFFICIENT OF WATER/OIL DISTRIBUTION: COMPLETE
Is heavier than air
ND
Is faster than Butyl
Acetate
0.6675
NA
NA
(See Section 16 for abbreviation legend)
--------------------------------------------------------------------------SECTION 10 - STABILITY AND REACTIVITY
--------------------------------------------------------------------------CONDITIONS TO AVOID:
FLAMES.
INCOMPATIBILITY:
ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN
STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES.
HAZARDOUS DECOMPOSITION PRODUCTS: OXIDES OF CARBON, OXIDES OF NITROGEN,
AND MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE.
Page 5
--------------------------------------------------------------------------SECTION 10 - STABILITY AND REACTIVITY
--------------------------------------------------------------------------HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
--------------------------------------------------------------------------SECTION 11 - TOXICOLOGICAL PROPERTIES
--------------------------------------------------------------------------PRODUCT LD50: 5000 mg/kg
PRODUCT LC50: 5500 ppm
COMPONENT TOXICOLOGICAL INFORMATION:
----------- CHEMICAL NAME ----------N-HEXANE
PROPANE/ISOBUTANE/N-BUTANE
MINERAL OIL HYDROTREATED (SEVERE)
PROPANE/ISOBUTANE/N-BUTANE
ALUMINUM ISOPROPOXIDE
METALWORKING FLUID ADDITIVE
STODDARD SOLVENT
PETROLEUM LUBRICATING GREASE
AUTOMATE BLUE
DIMETHYLBENZENE
AUTOMATE RED B
ETHYLBENZENE
1,2,4-TRIMETHYLBENZENE
1,3,5-TRIMETHYLBENZENE
TOLUENE
------ LD50 -----28710 MG/KG/RAT
NE
ND
NE
11300 MG/KG/RAT
>5000 MG/KG/RAT
>5000 MG/KG/RAT
NE
NE
4300 MG/KG RAT
NE
3500 MG/KG/RAT
5000 MG/KG RAT
NE
636 MG/KG/RAT
------ LC50 -----150000 MG/M3/MOUSE
658000 MG/M3/4HRAT
ND
658000 MG/M3/4HRAT
NE
ND
>5500 MG/M3/4/RAT
NE
NE
30000 MG/M3/MAMMAL
NE
NE
3658 PPM/4H RAT
4878 PPM/4H/RAT
49000 MG/M3/4H/RAT
--------------------------------------------------------------------------SECTION 12 - ECOLOGICAL INFORMATION
--------------------------------------------------------------------------ECOLOGICAL INFORMATION:
No Information.
--------------------------------------------------------------------------SECTION 13 - DISPOSAL CONSIDERATIONS
--------------------------------------------------------------------------DISPOSAL METHOD:
REGULATIONS.
DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL
Page 6
--------------------------------------------------------------------------SECTION 14 - TRANSPORTATION INFORMATION
--------------------------------------------------------------------------DOT PROPER SHIPPING NAME: CONSUMER COMMODITY
DOT TECHNICAL NAME: ORM-D
DOT HAZARD CLASS:
DOT UN/NA NUMBER:
HAZARD SUBCLASS:
PACKING GROUP:
RESP. GUIDE PAGE:
--------------------------------------------------------------------------SECTION 15 - REGULATORY INFORMATION
--------------------------------------------------------------------------U.S. FEDERAL REGULATIONS: AS FOLLOWS OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
IMMEDIATE HEALTH HAZARD
GAS HAZARD
CHRONIC HEALTH HAZARD
FIRE HAZARD
PRESSURIZED
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------N-HEXANE
CAS NUMBER
110-54-3
WT/WT % IS LESS THAN
45.0 %
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------AUTOMATE RED B
U.S. STATE REGULATIONS: AS FOLLOWS -
CAS NUMBER
MIXTURE
Page 7
--------------------------------------------------------------------------SECTION 15 - REGULATORY INFORMATION
--------------------------------------------------------------------------NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------MINERAL OIL HYDROTREATED (SEVERE)
ALUMINUM ISOPROPOXIDE
CAS NUMBER
64742-52-5
555-31-7
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------MINERAL OIL HYDROTREATED (SEVERE)
CAS NUMBER
64742-52-5
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------TOLUENE
CAS NUMBER
108-88-3
INTERNATIONAL REGULATIONS: AS FOLLOWS CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
--------------------------------------------------------------------------SECTION 16 - OTHER INFORMATION
--------------------------------------------------------------------------HMIS RATINGS - HEALTH: 1
FLAMMABILITY: 4
REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 10/02/02
REASON FOR REVISION: NEW FORMAT
VOLATILE ORGANIC COMPOUNDS (VOCS): 4.32 lbs/gal,
LEGEND:
517 grams/ltr
N.A. - Not Applicable, N.E. - Not Established,
N.D. - Not Determined
---------------------------------------------------------------------------
Page 8
--------------------------------------------------------------------------DISCLAIMER
--------------------------------------------------------------------------The information contained on this MSDS has been checked and should be
accurate. However, it is the responsibility of the user to comply with all
Federal, State, and Local laws and regulations.
--------------------------------------------------------------------------<END OF MSDS>