Stock Models

Submittal Data
301-001
1600 Series Pumps (Stock Models)
EFFECTIVE: October 4, 2013
SUPERSEDES: July 1, 2011
1750 RPM MODELS
ENGINEER
JOB
CONTRACTOR
ITEM NO.
REP.
MODEL NO.
IMPELLER DIA.
G.P.M.
T.D.H.
H.P.
WEIGHT
ELEC. CHAR.
PUMP/MOTOR
A
B (Approximate)
TAPPED
HOLE
1/4” NPT
C
D
TAPPED
HOLE
1/4” NPT
* 1⁄4 HP AVAILABLE IN 1 PHASE ONLY
DIMENSIONS:
MODEL NUMBER
STOCK 1600
CUSTOM 1600
FLANGE
SIZE
1600
1610
1612
1614
1611
1615
11⁄2 (38)
11⁄2 (38)
POWER
HP (KW)
DIMENSIONS
A
B
1⁄
4
(0.19) *
1⁄
3
(0.25)
1⁄
2
(0.37)
17.0 (432)
1⁄
3
(0.25)
18.0 (457)
1⁄
2
(0.37)
3⁄
4
(0.56)
1616
16.0 (419)
18.5 (470)
31⁄8 (79)
19.0 (483)
1619
2 (51)
11⁄2 (1.10)
1630
(0.37)
1632
3⁄
4
(0.56)
1634
1635
2 (51)
1 (0.75)
19.0 (483)
3 (76)
21.0 (533)
1638
2 (51)
2 (1.50)
18.5 (470)
31⁄2 (89)
141⁄2 (368)
173⁄8 (441)
19.0 (483)
131⁄2 (343)
161⁄8 (410)
161⁄2 (419)
191⁄2 (495)
21.0 (533)
21.0 (533)
35⁄8 (92)
23.0 (584)
3 (2.37)
English dimensions are in inches. Metric dimensions are in millimeters. Metric data is presented in (
Do not use for construction purposes unless certified.
NOTE: Individual Submittal Data sheets are available for CUSTOM models.
161⁄8 (410)
18.0 (457)
11⁄2 (1.10)
1641
131⁄2 (343)
23.0 (584)
11⁄2 (1.10)
1636
127⁄8 (327)
18.5 (470)
2 (1.50)
1⁄
2
101⁄4 (260)
19.5 (495)
(0.56)
1 (0.75)
D
16.0 (419)
3 (76)
1 (0.75)
3⁄
4
C
24.0 (610)
).
MATERIALS OF CONSTRUCTION
Item
Standard
Optional
Casing
Cast Iron
Bronze
Impeller
Cast Bronze
N/A
Shaft
Hardened Alloy Steel
Stainless Steel 416
Shaft Sleeve
Cupro-Nickel
N/A
Bracket
Cast Iron
Cast Iron with Stainless
Steel Face Plate
N/A - Not Available
SPECIFICATIONS
MOTORS
1750 RPM, Three Phase 200V or 230/460V, 60Hz.
Also available in Single Phase with overload protection except
3HP (2238 Watts).
BODY
Flanged in-line connections. Companion flanges are included.
FLANGES
Flanges are tapped for gauges (1⁄4" NPT).
IMPELLER
Closed, dynamically balanced
DRIVE COUPLING
Non-Metallic, vibration dampening
FRAME
Ball bearing type, permanently lubricated.
REMOVABLE BEARING CARTRIDGE FITS ALL MODELS.
MECHANICAL SEAL
Type 21 2 Piece Standard – 250°F (121°C) Operating Temperature
or Optional High Temperature – 300°F (149°C) Operating Temperature
WORKING PRESSURE
175 PSI (1207 kpa). In accordance with ANSI Standard B16.1.
1600 SERIES STOCK UNIT QUICK SELECTION CURVES (1750 RPM)
1600 SERIES CUSTOM UNIT QUICK SELECTION CURVES (1750 RPM)
Comments:
____________ ____________________________
Do it Once. Do it Right.®
TACO, INC., 1160 Cranston Street, Cranston, RI 02920 Telephone: (401) 942-8000 FAX: (401) 942-2360.
TACO (Canada), Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8. Telephone: 905/564-9422. FAX: 905/564-9436.
Visit our web site at: http://www.taco-hvac.com
Printed in USA
Copyright 2013
TACO, Inc.