ENDICOTT™ RIGHT HEIGHT™ ELONGATED TOILET ❑

ENDICOTT™ RIGHT HEIGHT™
ELONGATED TOILET
VITREOUS CHINA
ENDICOTT™ RIGHT HEIGHT™
ELONGATED TOILET
❑ 091-5475
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•12" (305mm) rough-in
•Elongated bowl
•Close-coupled tank
•16-1/2" rim height for accessible applications
•Design-matched to Endicott Lavatory
•Includes design-matched molded wood
seat (5725.464)
•2 bolt caps
•100% factory flush tested
•One year total toilet warranty
❑ 131-5475 Bowl
❑ 141-5400 Tank
25 ± 6mm (1 ± 1/4)
Nominal Dimensions:
743 x 438 x 838mm
(29-1/4" x 17-1/4" x 33")
FINISHED WALL
216mm
(8-1/2)
743mm
(29-1/4)
438mm
(17-1/4)
Fixture and seat only, supply by others
C/L OF SEAT POST
MTG HOLES ON
140mm (5-1/2) CTRS
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
C/L
400mm
(15-3/4)
483mm
(19)
838mm
(33)
425mm
(16-3/4)
* 203mm
(8)
13mm (1/2)
89mm (3-1/2)
To Be Specified:
❏ Color: ❏ White ❏ Biscuit
❏ Supply with stop:
381mm (15)
305mm
(12)
152mm (6)
C/L OF OUTLET AND
TOILET MTG BOLTS
FINISHED
FLOOR
273mm
(10-3/4)
* 152mm (6)
C/L OF SUPPLY
AS REQUIRED
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
*SUPPLY
NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
© 2009 Eljer
10
Revised 3/09