DV­100
Image processor for V­series LED displays
High­end video processing
With the DV­100 LED Image Processor, Barco offers high­end video processing technology
for basic LED applications. Specifically designed for the V­series LED displays, the
processing unit is the exact same Athena™ scaler as in the high­class DX­100 and DX­700
processors. Even for less demanding markets, Barco is not compromising on video
processing quality.
Extensive source compatibility and setup possibilities
Next to supporting standard inputs up to (dual) HD­SDI, the V­series also support new
standards like 3G SDI, HDMI and Display port. The DV­100 is managed and controlled by
the dedicated V­series Toolset (VTS), a direct derivative of the high­class Director Toolset.
The VTS comes with an intuitive interface for easy display management and offers
advanced options such as brightness, gamma and color temperature control and display
configuration. Communication between the DV­100 and VTS occurs via VVI (V­series Video
Interface) routed over a standard CAT5 cable.
Technical specifications
Video inputs
Input 1: DVI­I
d Digital formats; all single­link DVI digital formats up to 165 Mhz, per DVI 1.0
Specification and all dual­link DVI formats up to 300 Mhz; Max H Active:
4096 Max V Active: 3072
d Analog formats: NTSC/PAL composite and Y/C video, SD YPbPR with bi­
level sync, HD YPbPr with tri­level sync, RGBHV/RGBS/RGsB computer
video with bi­level sync
d Analog sampling: sources with pixel rates up to 170 Mhz are sampled 1:1;
sources with pixel rates above 170 Mhz are filtered and sampled at 170
Mhz, including but not limited to 1920x1200p, 2048x1080p
d Active loop­through output of all input signals, including EDID
d EDID version 1.3 compatible
d HDCP NOT compatible
Input 2: HD­15 VGA
d Format: NTSC/PAL composite and Y/C video SD YPbPr with bi­level sync HD
YPbPr with tri­level sync per SMPTE 274, RGBHV/RGBS/RGsB computer
video with bi­level sync
d Sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources
with pixel rates above 170 Mhz are filtered and sampled at 170 Mhz,
including but not limited to: 1920x1200p, 2048x1080p
d Active loop­through output of all input signals
d EDID version 1.3 compatible
Input 3: HDMI (Type A)
d Formats: RGB and YCbCr; Resolutions up to 2048x1080p @ 60 Hz
d EDID version 1.3 compatible
d HDCP NOT compatible
Input 4: DisplayPort
d Formats: resolutions up to 2560x1600 @ 60Hz (30 bits) per DisplayPort
1.1a
d HDCP NOT compatible
Input 5: SD/HD/3G SDI (BNC)
d Formats: SD­SDI per SMPTE 259M­C (NTSC/PAL resolution); HD­SDI per
SMPTE 292M, 296M; 3G­SDI per SMPTE 425
d Re­clocked loop­through output
Video outputs
Output 1: HD­15 VGA
d Fixed @ 1280x1024 @ 50, 59.94, 60
d Preview monitor
Output 2: HDMI (Type A)
d Fixed @ 1280x1024 @ 50, 59.94, 60
d Preview monitor
Output 3: VVI (CAT5)
d 2x Barco VVI V­series proprietary Video Interface to LED
d Up to 1280x1024
Other
Height
88 mm (2 RU rackmount) (3.5 inch)
Width
432 mm ­ 484 mm with chassis handles (17 inch ­ 19.06 inch with chassis
handles)
Depth
434 mm chassis only ­ 470 mm including buttons and connectors (17.09 inch
chassis only ­ 18.51 mm including buttons and connectors)
Input power
100­240 VAC, 47­63 Hz, Auto select 2.0 A max
Environmental temperature
0­40 °C (32­104° F)
Environmental humidity
0­95% non­condensing
Warranty
1 year
Certifications
ETL, CE, FCC Class A, REACH, RohS, WEEE
Generated on: 04 Oct 2012
Technical specifications are subject to change without prior notice.
Please check www.barco.com for the latest information.