ORACAL 975 Premium Structure Cast

ORACAL® 975
Premium Structure Cast
Technical
Datasheet
2015/36
Page 1 of 2
Description
Multi-layered cast PVC film. Various structured designs available in several colours. Specially developed for decorative
surface refinement when designing and wrapping car components. Suitable for uneven and slightly curved surfaces. For
more curved surfaces, as well as for corrugations or rivets, these films should be worked in and cut and applied with an
overlap at the edges. The applied material is easy to remove with the appropriate equipment.
Release Paper
Double sided PE coated paper, one side siliconised, 143 g/m²
Adhesive
Solvent polyacrylate, re-positionable, permanent, transparent
Technical Data
Thickness* (without paper and adhesive)
Dimensional stability (FINAT TM 14)
150 micron
Adhered to steel shrinkage 0,1 mm max.
Temperature resistance***
Sea water resistance (DIN 50021)
Resistance to solvents and chemicals
Adhered to aluminium, -50° C to +120° C, no variation
Adhered to aluminium, after 100h/23° C, no variation
At room temperature, 72h after adhesion to aluminium, shortterm resistance to most oils and greases, fuels, aliphatic
solvents, weak acids, salts and alkalis
Adhered to steel, self-extinguishing
22 N/25 mm
Along: min. 11 MPa
Across: min. 11 MPa
Along: min. 35%
Across: min. 35%
2 years
> +15° C
Black, white, coloured:
5 years
Metallic:
3 years
Fire behavior (DIN 75200)
Adhesive power* (FINAT TM 1, after 24h, stainless steel)
Tensile strength (DIN EN ISO 527)
Elongation at break (DIN EN ISO 527)
Shelf life**
Application temperature
Maximum service life by specialist application and
proper care and usage
Applies for vertical outdoor exposure and normal climate of
Central Europe. Please follow the additional notes at the
end of this datasheet. Further information is available here:
www.orafol.com/gp/europe/en/support
* average
** short-term exposure *** in original packaging, at 20° C and 50% relative humidity
Important to note
The above information is based upon our present knowledge and practical experience. The information is given without any
guarantee or agreement with regards to the quality or properties of the material. It does not constitute a warranty of any
certain quality, properties and/or service life concerning the ORAFOL colour films.
Please note that by nature films are more sensitive than lacquers. Therefore, films must be treated and maintained with the
greatest care. For application of ORAFOL colour films (wrapping and removal) as well as for maintenance and use, please
refer to our documents ‘Processing Guidelines’ and ‘Maintenance and Usage Terms’ (both documents are available in pdf
format to download: www.orafol.com/gp/europe/en/support). If our guidelines are not followed, please be advised that in
particular the maximum service life information, stated as based on our experience, does not apply. Further information about
the expected maximum service life is found in the Processing Guidelines (see no. 2 there). If the processing guidelines and
maintenance and usage terms are not complied with, any warranty and liability is excluded.
ORAFOL Europe GmbH - Orafolstraße 2 – D 16515 Oranienburg - Germany
graphic.products@orafol.de – www.orafol.com
ORACAL® 975
Premium Structure Cast
Technical
Datasheet
2015/36
Page 2 of 2
Please contact a professional workshop or ORAFOL’s customer support
The batch traceability according to ISO 9001 is done on the base of the roll number.
if
you
have
further
questions.
IMPORTANT NOTICE
®
All ORACAL products are subject to careful quality control throughout the manufacturing process and are warranted to be of
®
merchantable quality and free from manufacturing defects. Published information concerning ORACAL products is based
upon research which the Company believes to be reliable although such information does not constitute a warranty. Because
®
of the variety of uses of ORACAL products and the continuing development of new applications, the purchaser should
carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all
®
risks regarding such use. All specifications are subject to change without prior notice. ORACAL is a registered trademark of
ORAFOL Europe GmbH.
ORAFOL Europe GmbH - Orafolstraße 2 – D 16515 Oranienburg - Germany
graphic.products@orafol.de – www.orafol.com