KPA-2106 gelb

2.1x0.6mm RIGHT ANGLE SURFACE LED
LAMP
P/N: KPA-2106YC
YELLOW
Description
Features
2.1mmX0.6mm RIGHT ANGLE SMT LED, 1.0mm
The Yellow source color devices are made with
THICKNESS.
Gallium Arsenide Phosphide on Gallium Phosphide
LOW POWER CONSUMPTION.
Yellow Light Emitting Diode.
W IDE VIEW ING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE: 2000PCS / REEL .
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAA5673
REV NO: V.9
DATE: NOV/12/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 4
Selection Guide
Part No.
Dice
KPA-2106YC
Iv (mcd)
@ 20 mA
Lens Type
YELLOW (GaAsP/GaP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ
θ1/2
2.6
7
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Yellow
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
C
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA5673
REV NO: V.9
DATE: NOV/12/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 4
Yellow
KPA-2106YC
SPEC NO: DSAA5673
REV NO: V.9
DATE: NOV/12/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 4
KPA-2106YC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA5673
REV NO: V.9
DATE: NOV/12/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 4