VS-12156U-RP Pro+
Hardware Spec.
Processor
Quad Core Intel® Core™ i5 3.7GHz Processor
DRAM
8GB DDR3 RAM
HDD Capacity
12 x 3.5” SATA 6Gb/s, SATA 3Gb/s hard drive
NOTE:
1. The system is shipped without HDD.
2. For the HDD compatibility list, please visit here
HDD Tray
12 x hot-swappable and lockable tray
LAN Port
4 x Gigabit RJ-45 Ethernet port
LED Indicators
Status, 10 GbE, LAN, eSATA, hard drives
*10 GbE (reserved), eSATA (reserved)
USB
2 x USB 3.0 port (rear)
4 x USB 2.0 port (rear)
Support USB pen drive, USB hub, and USB UPS etc.
Buttons
System: Power button, reset button
Alarm Buzzer
System warning
Form Factor
2U, Rackmount
Dimensions
88(H) x 439(W) x 520(D) mm
3.46(H) x 17.28(W) x 20.47(D) inch
Weight
Net weight: 15.88 kg (35.01 lb)
Gross weight: 25.60 kg (56.44 lb)
Operation Environment
Temperature 0~40˚C/ 32~104˚F
Humidity 0~90% R.H.
Power Supply
Input: 100-240V AC, 50/60Hz, Output: 600W
Power Consumption
167W Write/Read (with 12 x 2TB HDD installed)
Expansion Slot
2 (reserved for network and storage expansion)
Video Output
1x HDMI
1x VGA
Fan
3 x 6 cm smart cooling fan
Certification
CE, FCC, VCCI, BSMI, LVD
Remark:
The VS-12100U-RP Pro+ rack mount series comply with ANSI/EIA-RS-310-D rack mounting
standards. Before purchasing the server racks for these models, please make sure the server
racks conform to the following criteria:
1. Rack size
A. Mounting post width: ≥ 451mm
B . Panel width: ≥ 500mm
C. Mounting post depth: 650mm~850mm
2. The rack kits for the VS-12100U-RP Pro rack mount series are only compatible with
square-hole server racks.
Software Spec.
Recording
Supported Camera Please visit http://www.qnap.com/NVR/CompatibilityX01.html
Models
Number of
Up to 56
Channels
Supported
(Recording)
Video
H.264/ MPEG-4/ M-JPEG/ MxPEG (depending on the camera models)
Compression
Video Setting
Video compression, resolution, quality, frame rate, audio
Recording Mode
‧Continuous/ schedule/ manual recording
‧Alarm recording by multiple events
‧Auto snapshot
Buffer Storage for ‧Pre-recording: Up to 300 sec
Alarm Images
‧Post-recording: Up to 300 sec
(before and after
events)
Recording
Up to 30 fps at 1080P, 720P, VGA for each channel
Performance
* Real performance may vary in different environment
Megapixel
Supports megapixel cameras (up to 10-megapixel)
Recording
Network
450 Mbps
Throughput
File Format
AVI (QNAP codec is required for playback)
Recording
Real-time digital watermarking
Enhancement
Application
Fisheye
Support the specific fisheye IP Cameras on remote monitoring/playback
Dewarping
and local display interface
* Please visit http://www.qnap.com/NVR/CompatibilityX01.html to get
the compatibility list
360° Panomorph
Support the specific IP camera with panomorph lens on remote
Video
monitoring/playback and local display interface
Local Display
Display Mode
1, 4, 6, 8, 9, 10, 12 or 16-channel display mode, sequential display mode
Hardware Decode
Full HD 1080P 300FPS
*The NVR will auto detect H.264 stream format and activate hardware
decoder for 12 CH live view.
Local Monitoring
Full screen display, event notification, PTZ control, digital zoom
Enhancement
Local Playback
Single view playback from local NVR server
Search Mode for
By date & time
Local Playback
Playback Control
Play, pause, stop, reverse play, next/ previous video file, different speed
control
Local Playback
Full screen display, digital zoom
Enhancement
Export
Convert multiple recording files to the external USB device instantly
System
Quick configuration, administration password, network settings, time
Administration
settings, disk volume configuration, camera settings
Remote Monitoring (Windows)
Display Mode
1, 4, 6, 8, 9, 10, 12, 16, 20, 25, 36,42 or 64-channel display, sequential
mode
Dual-display mode Up to 2 monitors
Multi-server
Up to 128-channel monitoring from multiple VioStor NVR servers
Monitoring
(browser-based)
Monitoring
Full screen display, video snapshot, manual recording, event notification,
Enhancement
PTZ control, digital zoom
E-map
Uploading the digital maps and indicating the locations of the IP cameras
and GPI devices of a monitoring location or region
Remote Playback (Windows)
Display Mode
1, 4, 6, 8, 9, 10, 12 or 16-channel display
Search Mode
By date & time, timeline, event, and intelligent video analytics (IVA)
Intelligent Video
Motion detection, missing object, foreign object, out of focus, and
analytics (IVA)
camera occlusion
Playback Mode
Play, pause, stop, reverse play, next/ previous frame, next/ previous
video file, different speed control
Playback
Full screen display, video snapshot, digital zoom, digital watermarking
Enhancement
Export
Convert multiple recording files to client PC instantly
Download
Download recordings via the web
QNAP Surveillance Client for Mac
Display Mode
1, 4, 6, 8, 9, 10, 12, or 16-channel display mode, sequential display
mode
Monitoring
Full screen display, event notification, PTZ control, digital zoom
Enhancement
Playback
Single view playback
Search Mode for
By date & time
Playback
Playback Control
Play, pause, stop, reverse play, next/ previous video file, different speed
control
Playback
Full screen display, digital zoom
Enhancement
Export
Convert multiple recording files to Mac device instantly
Advanced Event Management
Events
Motion detection, alarm input, connection failure, recording failure, and
user-defined event
Actions
Video recording, email alert, SMS alert, buzzer, PTZ camera control,
alarm output, and user-defined action
Backup
Schedule Remote
Schedule video data backup to a NAS on the local network
Replication
Security Control
Authority
Different user groups and rights can be assigned to different users
Management
Host Access
Specify the connections to be allowed and denied to access the VioStor
Control
NVR
Auto Logoff
Automatic user logoff from idling configuration pages
Event Logs
Detailed event logs
On-line Users List
Record of the users currently logged on and previously logged on to the
VioStor NVR
Digital
Verify whether or not the videos and snapshots are original
Watermarking
Reliability
Operation System Linux-embedded system, free from PC crash and virus attack
Disk Management
.Single disk, RAID 0, RAID 1, RAID 5, RAID 5+ hot spare, RAID 6, RAID
6+ hot spare, and JBOD/Linear
.Online RAID Capacity Expansion, Online RAID Level Migration
.HDD S.M.A.R.T., bad blocks scan
UPS
APC/ CyberPower/ Epson/ MGE/ YEC (USB UPS)
Network Services
Support
HTTP, TCP/IP, SMTP, DHCP, Static IP, DNS, DDNS, FTP, NTP, UPnP,
failover, load-balancing, multi-IP setting
Multiple Gigabit
Failover/ load-balancing/ multi-IP setting
LAN
Services
Web File Manager, FTP, SMB/CIFS
Language Support
Language
Czech/ Danish/ Dutch/ English/ French/ Finnish/ German/ Hungarian/
Italian/ Japanese/ Korean/ Norwegian/ Polish/ Portuguese/ Russian/
Spanish/ Swedish/ Simplified Chinese/ Traditional Chinese/ Turkish
Remote Surveillance
Client PC
Google Chrome, Internet Explorer, Mozilla Firefox (Browser-based)
QNAP Surveillance Client for Windows
Mac
QNAP Surveillance Client for Mac
Android Tablet,
VMobile
phone
iPad, iPhone, iPod
VMobile
Touch
Windows Mobile
VMobile
(6.1, 6.5) Device
Client PC Requirement (Suggested system requirement for better video performance)
CPU
.M-JPEG format (up to 56 channels ):
Quad core CPU 2.33GHz or above
.MPEG-4/ H.264/ MxPEG format (up to 56 channels ):
Core i7 CPU 2.8GHz or above
* * For higher surveillance performance, please select more advanced PC
models.
Memory
4 GB or above
Operation System Microsoft Windows Vista/ 7/ 8 or Mac OS X 10.7.x, 10.8.x
Web Browser
Microsoft Internet Explorer 8/9/10 (Windows PC, desktop mode, 32-bit)
Google Chrome 24.0.1312.57 m (Windows PC)
Mozilla Firefox 18.0.2 (Windows PC)
Network Interface 10/100/1000 Mbps
Display Resolution 1280 x 800 pixels or higher for better user experience
Utility Software
QNAP Finder
The client application to discovery and quick setup of the VioStor NVR
QNAP Surveillance The client application used to remotely access QNAP NVR servers for
Client For
performing video monitoring and playback functions on client PC.
Windows
QNAP Surveillance The client application used to remotely access QNAP NVR servers for
Client For Mac
performing video monitoring and playback functions on Mac.
QNAP Codec
The video codec to play the recording files on Windows Media Player.
VMobile
The Mobile App to monitor the network cameras on the VioStor NVR by
the Android phone, Android tablet, iPhone, iPad, iPod touch, and
Windows mobile (6.1, 6.5) device.