Submittal 1420 Comby

Penal-Ware® 1420 Series
20" Lav-Toilet Comby with Lavatory Oval Bowl
1420-LO-2-BP-04-FV-PHF
1420-AL-2-BP-04-FV-PHF
Fixture May Show Some Available Options
Please visit www.acorneng.com for most current specifications.
20" Lav-Toilet Comby with Lavatory Oval Bowl
Fixture is arranged to be installed on finished wall and serviced from an accessible pipe chase. Optional Wall
Sleeve or Metal Template is recommended for all installations for required wall openings. Fixture is fabricated
from 14 gage, type 304 stainless steel cabinet and toilet bowl and is seamless welded construction with a
satin finish. The inside of the toilet bowl also has a satin finish. Cabinet interior is sound-deadened with
fire-resistant material. There are no accessible voids or crevices where contraband can be concealed.
Lavatory Oval Bowl is 14-3/4" x 9-1/2" x 5" deep. Standard elbow waste outlet is 1-1/2" O.D. plain end.
Optional Valve may be an Air-Control pneumatically operated, pushbutton valve using atmospheric air.
Pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve is direct acting,
non-metering type and is optionally available as metering with non-hold open feature. Metering valve timing is
adjustable from 5 to 60 seconds. Valve includes a 0.5 GPM flow control and can be remotely located up to 10
feet from the operating pushbutton. Valve and bubbler conform with lead-free requirements for NSF61,
Section 9 and CHSC 116875.
Toilet is blowout jet type with elongated bowl manufactured to ASME A112.19.3 and CSA B45.4 requirements
and will flush with a minimum of 25 PSI flow pressure when used in conjunction with a minimum of 1.28 GPF.
Trap has a minimum 3-1/2" seal and will pass a 2-1/8" ball. Toilet waste outlet is 2-3/8" diameter plain end
extending 3" beyond the fixture for wall outlet or Gasketed Waste for floor outlet.
Regularly Furnished items include a fast drain, an integral self-draining soap dish, and mounting hardware.
GUIDE SPECIFICATION
Provide and install Acorn Penal-Ware 20" wide Lav-Toilet Comby (specify model number and options). Fixture
shall be fabricated from type 304 stainless steel. Construction shall be seamless welded and exposed surfaces
shall have a satin finish. Counter top shall have an air-circulating, self-draining soap dish. Provide Air-Control
pneumatically operated pushbutton valve. Valve and bubbler conform with lead-free requirements for NSF61,
Section 9 and CHSC 116875. Toilet shall be blowout jet type with an elongated bowl, a self-draining flushing
rim, and an integral contoured seat. Toilet shall meet ASME A112.19.3 and CSA B45.4 requirements and will
flush with a minimum of 25 PSI flow pressure when used in conjunction with a minimum of 1.28 GPF. Toilet
trap shall have a minimum 3-1/2" seal that shall pass a 2-1/8" diameter ball and be fully enclosed. Cabinet
interior is sound-deadened with fire-resistant material. Fixture shall withstand loadings of 5,000 pounds
without permanent damage. Fixture shall be furnished with necessary fasteners for proper installation.
Page 1
P.1420
Revised: 09/09/15
Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com
®
Penal-Ware 1420: 20" Lav-Toilet Comby with Lavatory Oval Bowl
NOTES:
1. -04 Hot & Cold Air-Control
Valve Shown
2. Lavy Valve Pushbuttons
3. Lavy -BP Penal Bubbler
Shown
4. Optional -FV Flush Valve
Shown
5. Lavy Waste Outlet
6. Toilet Waste Outlet
7. Wall Mounting Hardware
233
4"
(603)
173
4"
(451)
1"
122
(318)
1
2
20"
(508) 14"
(356)
31"
(787)
3"
(76)
4"
(102)
3
4
5
1"
322
(826)
6
15"
(381)
1420-AL-2-BP-04 SHOWN
27
8"
(73)
7
1420-RO-1-BP-04 SHOWN (-LO OPPOSITE)
Page 2
P.1420
Revised: 09/09/15
Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com
®
Penal-Ware 1420: 20" Lav-Toilet Comby with Lavatory Oval Bowl
WALL THICKNESS AND TYPE (Must Specify)
Thickness: __________ Type: o Concrete o Block o Steel
MODEL AND OPTIONS SELECTION:
BASE MODEL NUMBER
3 1420
o
20" Lav-Toilet Comby
TOILET ORIENTATION (Must Specify)
o -AL
Angled Left
o -AR
Angled Right
o -RO
Right Offset
o -LO
Left Offset
FIXTURE MOUNTING AND WASTE (Must Specify)
o -1
Off-Floor, Wall Outlet
o -2
On-Floor, Wall Outlet
o -3
On-Floor, Floor Outlet
BUBBLER SELECTION (Must Specify)
o -BC
Bubbler, Code
o -BP
Bubbler, Penal
o -BPH
Bubbler, Penal Hemispherical
o -LF
Lav-Filler
VALVE SELECTION (Must Specify)
o -03
Air-Control, Single Temp, Non-Metering
o -03-M
Air-Control, Single Temp, Metering
o -04
Air-Control, Hot & Cold, Non-Metering
o -04-M
Air-Control, Hot & Cold, Metering
o -9
Punched for Valve by Others
(Specify Punching)
o -EVS1
Electronic Valve System - Single Temp
o -EVSP1
Electronic Valve Sys. w/ Piezo Pushbutton
o -EVS2
Electronic Valve System - Hot & Cold
o -EVSP2
Electronic Valve Sys. w/ Piezo Pushbuttons
o -MA
Manifolded Valve o 2 o 3 o 4
o -MH
Metering, Hot Side Only
o -MVC1
Time-Trol - Single Temp
o -MVC1-BAT Time-Trol - Single Temp Battery Operated
(Batteries Not Inlcuded)
o -MVC2
Time-Trol - Hot & Cold
o -MVC2-BAT Time-Trol - Hot & Cold Battery Operated
(Batteries Not Included)
o -PPZ1
Programmable Piezo Button - Single Temp
w/ 9VDC Plug-In Transformer
o -PPZ2
Programmable Piezo Button - Hot & Cold
w/ 9VDC Plug-In Transformer
VALVE OPTIONS
o -BRS
Brass Body Valve
o -CI
Cycle Interrupt for Time-Trol Valves
o -PBH
Hemispherical Pushbutton
o -PBP
Pushrod Activated Pushbutton
o -TF
Transformer, 120VAC to 24VAC
(-MVC option only)
FLUSH VALVE GPF's (Must Specify)
o -1.28 GPF (HET)
o -1.6 GPF
o -3.5 GPF
FLUSH VALVE OPTIONS (Must Specify)
o -EVSFV Electronic Flush Valve
o -EVSPFV Electronic Flush Valve w/ Piezo Pushbutton
o -FV
Flush Valve, Mechanical
q -FVBO
Flush Valve by Others
o -FVH
Flush Valve, Hydraulic
o -MVCFV Time-Trol Electronic Flush Valve
CABINET OPTIONS
o -FMT
Fixture Mounted Trim
o -IS
Integral Shelf
o -PH
Paper Holder o L o R o F
o -TB
Toothbrush Holder o Left o Right
o -TG
12 Gage Cabinet
o -TH
Towel Hook o Single o Double o Left o Right
o -VG1
Vent Grille, 5-3/4" x 8-3/4" o L o R o LF o RF
o -VG2
Vent Grille, 8-3/4" x 13" (Bottom Only)(-1 Only)
o -VG3
Vent Grille, 8-3/4" x 8-3/4" o L o R
o -VG4
Vent Grille, 8-3/4" x 17" (Bottom Only)(-1 Only)
LAVATORY WASTE OPTIONS
o -CW
Combined Waste
o -LW1
Lavy Thru-Wall Extension with P-Trap
o -LWE
Lavy Waste Extension (3" Standard)
Specify Length Beyond Fixture: ________
o -OF
Lavatory Overflow
o -PT
1-1/2” Removable P-Trap Waste
TOILET OPTIONS
o -CO1
Cleanout w/ 2-3/8” OD O-Ring Connection to
No-Hub 4" (Plain End Only, Not Applicable with
-GW or -3 Floor Outlet)
o -CO1-3 Cleanout w/ 2-3/8” OD O-Ring Connection to
No-Hub 3" (Plain End Only, Not Applicable with
-GW or -3 Floor Outlet)
o -COH
Cleanout Hook Assembly
o -FT
Flood-Trol (Manual Reset)
o -FTA
Flood-Trol, Auto-Reset
o -FTE
Flood-Trol, Electronic
o -FVO
Flush Valve Opposite In Lieu of Standard Location
o -FVT
Flush Valve Thru Wall Connector
o -GW
Gasketed Toilet Waste (Wall Outlet)
o -HPS
High Polish Seat
o -HS
Hinged Seat
o -PC
Pinned Cleanout Plug (For -CO1 Options above)
o -SPS
Suicide Prevention Skirt
o -TSC
Toilet Shipping Cover
o -TWE
Toilet Waste Extension (3" Standard)
Specify Length Beyond Fixture: ________
o -WO3B
2-3/8” P-Trap w/ 3" Plain End Waste Outlet
PRODUCT OPTIONS
q -EG
Enviro-Glaze Color Specify:__________
Toilet Interior & Exterior
q -EGE
Enviro-Glaze Color Specify:__________
Toilet Exterior Only
o -LPFV
Less Punching for Flush Valve
o -MT
Metal Template (Only 1 Required Per Project)
o -SW
Wall Sleeve
o -VAC
AcornVac System
Please visit www.acorneng.com for most current specifications.
Important: Installation instructions and current rough-in are furnished with each fixture. Do not rough in without certified dimensions.
Dimensions are subject to manufacturer's tolerance of plus or minus 1/4" and change without notice. Acorn assumes no responsibility for use of void or superseded data. © Copyright 2009 Acorn Engineering Company
Selection Summary
Approved for Manufacturing
Model No. & Option___________________________
Company__________________Title______________
Quantity____________________________________
Signature_________________ Date______________
Page 3
P.1420
Revised: 09/09/15
Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com