I N S TA L L AT I O N
pi l o t b r a k e p e d a l p a d 4429
CUSTOMER SERVICE
877.370.3604 (toll free)
Fi t s a l l F X ST m o dels, all F XDWG models, and all Kuryakyn forward
c on t ro l s .
Part #
304429
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
or call 715.247.2983
Included
1
1
Pilot Brake Pedal Cover
Instruction Sheet
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the following provisions:
Please read and understand entire instructions before starting installation.
Thank you for choosing Küryakyn!
PLEASE NOTE
It is the installers’ responsibility to make sure all fasteners (including pre-assembled) are
tightened before operation of motorcycle. Küryakyn will not warranty components that are
lost due to improper installation. Periodic maintenance may be required.
PIC.1
Tools Suggested
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or
duty between Küryakyn and a customer.
Procedure — Installation
STEP 1 Remove the stock brake lever pad.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
STEP 2 Install the new pilot brake pedal cover and
secure with the supplied set screw.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
Procedure — Replacing the Rubber Grips
STEP 1 Remove the set screws from the brake pedal body.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
STEP 2 The rubber grips are held in place with a pin; you must cut away the existing
STEP 3 Apply a small amount of
adhesive to the labeled tabs on each
rubber grip. Install the rubber grips in
the correct position (see PIC.2); press
the labeled tabs firmly against the inside
of the brake pedal body to adhere.
PIC.2
Lock ing P in
Set scre ws for
rubber gr ip
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the ”CATALOGS” icon. Each Küryakyn™
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
front
rubber grip
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and accessories designed for riders by riders.
STEP 4 Lock the grips in place with
the pin; feed the pin through the holes
in the pedal body and each of the
rubber grips. Take care not to bend the
pin.
STEP 5 Replace the three set screws.
Ride On!
4429-11HD-0506
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
Allen wrenches, needlenose pliers.
rubber grips to access the pin. Remove
the pin from the pedal body with
needlenose pliers.
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
©2005 Küryakyn USA ™ All Rights reserved.
brake pedal
body
mount in g
set scre w
rear
rubber grip
middle
rubber
grip