Proximity Key Tags and Patches For use with MS Series Proximity Readers PKT-10X

Proximity Key Tags and Patches
For use with MS Series ProximityTM Readers
PKT-10X
Proximity Key Ring Tag
•
•
•
•
Smallest Proximity Key Ring Tag available
Robust and Durable
- Washing Machine Tough
Unique Codes
Lifetime Warranty
AP-10X
Adhesive Proximity Patch
•
Turns virtually anything into a
proximity credential
•
Extremely strong adhesive, patch
will not accidently fall off
Unique Codes
Extremely Thin
•
•
Keri’s PKT-10X Proximity Key Ring Tag provides user convenience in a small, ergonomic, and extremely durable package.
The tag is equipped with a brass eyelet for attachment to a key ring that ensures the neck of the tag will not break during
the life of the system. Key Tags are especially convenient for building entrances where the user still has their car keys in
hand. If the system has many interior doors that are secured with a Keri access control system, users often attach the tag
to a lanyard for easy carrying, especially if the clothing does not have pockets. If parking gates are secured by an access
control system, a Keri Proximity Card is recommended because the tag is usually hanging with the keys in the ignition.
The AP-10X Adhesive Proximity Patch from Keri offers all the flexibility of other Keri proximity credentials, but in a form
factor that allows it to be attached to virtually anything. As with any Keri proximity device, it will read through most nonmetallic surfaces.
Common AP-10X Applications:
•
•
•
•
Attach it to a wallet or cell phone to create a personalized proximity credential
Use it with an existing photo ID card to create new security credentials without incurring the expense
of rebadging
Place it on high value inventory items to uniquely identify these items to your security system
Adhere it to older swipe technology device cards (such as Wiegand and Mag Stripe) to provide a low cost
proximity upgrade (the proximity patch can interfere with other RFID technologies)
Keri Proximity Credentials (including Cards, Tags, and Patches) can be used interchangeably on the same system
without worry about ID code duplication or format matching.
2305 Bering Drive  San Jose, California 95131
408-435-8400  Toll Free: 800-260-5265  Fax: 408-577-1792
Proximity Key Tags and Patches
For use with MS Series ProximityTM Readers
DATA SHEET, Page 2 of 2
PKT-10X Proximity Key Ring Tag
AP-10X Adhesive Proximity Patch
Specifications:
Specifications:
Read Range*:
MS-3000 up to 2 inches (5 cm)
MS-4000 up to 1 inch (2.5 cm)
MS-5000 up to 4 inches (10 cm)
MS-7000 up to 7 inches (18 cm)
Read Range*:
MS-3000 up to 2 inches (5 cm)
MS-4000 up to 1 inch (2.5 cm)
MS-5000 up to 4 inches (10 cm)
MS-7000 up to 7 inches (18 cm)
Size:
L = 1.51, W = 1.15, T = 0.155 inches
Approx. 38 x 29 x 4 mm
Size:
D = 0.980, T = 0.065 inches
Approx. 24.89 x 1.65 mm
Weight:
0.16 oz
(4.5 g)
Weight:
0.03 oz
(0.85 g)
Material:
ABS body, brass eyelet
Material:
Polycarbonate
Frequency:
125 KHz excitation / 62.5 KHz return
Frequency:
125 KHz excitation / 62.5 KHz return
Temperature:
-40° C to +70° C
Temperature:
-35° C to +50° C
Humidity:
0-100% non-condensing
Humidity:
0-100% non-condensing
Color:
Gray
Color:
Gray
Warranty:
The Key Tag comes with a limited lifetime warranty against
defects in materials and workmanship
Warranty:
The Patch comes with a limited lifetime warranty against
defects in materials and workmanship
Note: Specifications subject to change without notice. Trademarks are the property of their respective owners.
* Read range is stated in a clean RF and electrical environment with card presented parallel to the reader surface.
Presented By:
PN: 01198-001 Rev. B