furutech-e-tp609e

e-TP609E
AC Power Distributor
New! Furutech Axial Locking System
GC-303 EMI-Absorbing Internal Coating
All Metal Parts Treated with Furutech’s
Cryogenic and Demagnetizing α-Alpha Process
The e-TP609E is a sophisticated, luxuriously made single-chassis power distributor that eliminates
many common problems found with audio and video components caused by massively contaminated
electrical power lines.
The AC waveform becomes severely distorted by ground noise, voltage spikes and sags, high
frequency power supply noise from other components in your own system, plus radiated high frequency
digital noise from processors and digital interconnects. There are also distortion products at the top and
bottom of the AC waveform created by switch-mode power supplies in electronic devices on the same
circuit. Additionally, you’re never alone; your residential AC mains supply is shared with other
apartments, homes, and businesses on the same utility transformer. That’s why many audio and video
enthusiasts notice their systems are more enjoyable late at night or on weekends!
How can you tell you’re a victim of polluted AC power? Listen and look for these symptoms: Flat, hard,
and grainy high frequencies, a thick and bloated midrange, fat, uncontrolled bass, and loss of air and
soundstage stability. On video displays the picture resolution is less than sharp, with “ghosting”, color
shift, “snow”, or vertical and horizontal lines. If this looks and sounds familiar, you need Furutech!
Total Attention to Detail and Build Quality
Many A/V enthusiasts go to great lengths to carefully set up major system components, but pay little
attention to the source, the AC power. Furutech knows that each and every part of the chain is as
important as the next, so maximum attention is lavished by Furutech on all aspects of AC power
transfer.
The beautifully crafted special grade aluminum chassis effectively shields against another common
problem, RFI (Radio Frequency Interference) and a layer of Formula GC-303 (see below) blocks EMI
(Electro Magnetic Interference). Internal wiring is Furutech α-22, 3.8 sq. mm (< 12 AWG), that
guarantees low electrical resistance. Furutech Hyper Quality FI-E30(R) High End Performance
SCHUKO Sockets are wired to the High End Performance FI-09(R) IEC AC input of the e-TP 609. They
feature Rhodium-plated non-magnetic conductors for stable, long lasting, optimized power transfer.
Formula GC-303
GC-303 is a special material Furutech bonds to the interior bottom-plate of the chassis (see illustration
below) that absorbs EMI (Electromagnetic Interference) generated by the internal fittings of the unit.
The e-TP 609E uses no filtering besides Formula GC-303 so AC resistance is kept to a minimum,
allowing a more resolving, powerful, dynamic, and colorful performance from your components.
GC-303 Absorbs Internally Generated EMI
GC-303
Furutech’s Patent-Pending Axial Locking System
Furutech designed a special locking screw (see illustration below) that anchors each duplex receptacle,
prevents oscillation, and enhances long-term stability. Further, a special 3M material isolates the duplex
outlets from resonance. Total attention to detail: Each Axial Lock is torqued to perfection to work with
the 3M resonance control material, with 4 spikes provided to mount the entire unit.
Locking screw
Axial Locking System
Non-Axial Locking System
Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process
Using cutting-edge technology and materials, Furutech developed a low-temperature two-stage
process that significantly improves every facet of audio and video performance. The treatment begins
during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using
high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250C.
The treated parts actually change their molecular structure at these extremes of temperature relieving
internal stress. The molecules bond together more tightly and the overall structure becomes more
stable. This improves electrical conductivity and so power and signal transfer.
Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization
treatment. Ordinary high power magnets used for this purpose often increase magnetization effects;
they leave some areas more magnetized than others. This patented process uses controlled
attenuation to completely eliminate magnetization for immediately more vivid and colorful improvements.
Ring Demagnetization further enhances conductivity of all treated materials. The patent holder for this
treatment is Sekiguchi Machine Sale Co., Ltd. in Japan; Furutech are licensed users of the technology.
ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep
all connectors, conductors, and metal parts in a perfect stress-free, stable and highly
conductive state.
The Final Result
The 2-Step Alpha Cryogenic and Demagnetizing Process works in tandem with other design-in features
to create the most optimized AC power transfer possible. Furutech’s total awareness and devotion to
detail results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds
and a larger, more stable soundstage, vivid tonal colors and deeper extension at both ends of the
frequency range. The e-TP 609E will allow the delicacy, refinement and nuance of a performance
through, along with micro- and macro-dynamics that will leave you breathlessly engaged. Displays of all
types will exhibit greater, sharper resolution with less ghosting, color shift, “snow”, or vertical and
horizontal lines.
CIRCUIT PATH
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
GC - 30 3
A.C. Inlet (FI-0 9 )
e-TP 6 0 9 E A.C. Power Dist r ibut or
SPECIFICATIONS
TYPE
SPECIFICATION
e- TP 609
TYPE
SPECIFICATION
e- TP 609
RATING
250V AC 50/60Hz
MOVEMENT TEMP.
-10C~40C
CURRENT
10 A
PRESERVATIVE TEMP.
-20C~50C
OUTLETS
6 Outlets
BODY MATERIAL
AL. ALLOY PLATE (PAINTED)
FILTER TYPE
GC-303 Absorbs EMI
OUTWARD SIZE
246(W)X130(D)X56(H) mm
WEIGHT (Net.)
2.85 Kg
All metallic parts are treated with
FURUTECH Alpha Cryogenic and Demagnetizing Treatment
FURUTECH reserves the right to change product specifications without prior notice.
FURUTECH CO., LTD.
www.furutech.com
service@Furutech.com
Make A More Powerful Connection with Furutech!