Test Equipment Solutions Datasheet
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of
quality test & measurement (T&M) equipment. We stock all major equipment types such as
spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from
all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers
for whom high performance, quality and service are key, whilst realising the cost savings that
second user equipment offers. As such, we fully test & refurbish equipment in our in-house,
traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2
year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of
combined experience, which enables us to deliver industry-leading service and support. We
endeavour to be customer focused in every way right down to the detail, such as offering free
delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan
unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher
reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and
offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off
balance sheet accounting. Both second user and rental improve the key business measure of
Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment
worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house
Lab.
All products supplied by Test Equipment Solutions include:
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).
- Free loan equipment during warranty repair, if available.
- Full electrical, mechanical and safety refurbishment in our in-house Lab.
- Certificate of Conformance (calibration available on request).
- Manuals and accessories required for normal operation.
- Free insured delivery to your UK mainland address (sales).
- Support from our team of seasoned Test & Measurement engineers.
- ISO9001 quality assurance.
Test equipment Solutions Ltd
Unit 8 Elder Way
Waterside Drive
Langley
Berkshire
SL3 6EP
T: +44 (0)1753 596000
F: +44 (0)1753 596001
Email: info@TestEquipmentHQ.com
Web: www.TestEquipmentHQ.com
R3267/3273
Spectrum Analyzers
For 3rd-Generation Mobile Communications
Present Digital Communication standards
(W-CDMA, PDC, PHS, IS-136, GSM, DECT, cdmaOne…)
R3267/3273
New communication technologies such as
3rd Generation Mobile (IMT 2000),
microwave digital broadcast, high-speed
multimedia mobile access (MMAC), and
satellite-based services require the latest
in spectrum and modulation measurement
capabilities. Furthermore, these new services must be introduced in less time and
for more users than ever before.
The R3267/3273 is a high-performance
spectrum analyzer designed to meet these
needs.
for
evaluating/testing wide bands,
high frequencies,
and high-quality digital modulation signals required in these next-generation
communication systems.
High Frequency and Wide Bandwidth Measurements
7Frequency range:
7Resolution bandwidth:
7Span accuracy:
R3267 100 Hz to 8 GHz
R3273 100 Hz to 26.5 GHz
10 Hz to 10 MHz
±1% or better (for all spans)
High Dynamic Range Measurements
7Dynamic range:
-154 dBc/Hz (2 GHz band, typ.)
70 dB or better (5 MHz offset, typ.)
for W-CDMA ACP measurement
7Outstanding Signal purity: -113 dBc/Hz (10 kHz offset)
7Input attenuator:
75 dB in 5 dB steps (R3267)
71 dB gain compression:
0 dBm
73rd order intermodulation
distortion:
-80 dBc or less
High Speed Measurements
7Trace update rate:
71µs fast zero-span sweep
up to 20 times/sec.
The 3267/3273 features a frequency span
accuracy within ±1% and a dynamic range
of -154 dBc/Hz (typ) in the 2 GHz band to
allow accurate, repeatable measurements
for high-quality digital signals. Further, its
10 Hz to 10 MHz resolution band with
filter and ability to perform a 70 dB (typ,
at 5 MHz offset) ACP measurement on WCDMA makes it ideal for testing of wide
band signals. Finally, with a frequency
range from 100 Hz to 8 or 26.5 GHz, the
R3267/3273 allow comprehensive measurements of even high frequency systems.
Simplified, Automated Measurements for Mobile
Communications
In addition, the optional digital modulation analysis option offers one-button
testing of modulation parameters for
communication systems including PHS,
PDC, IS-136, DECT, GSM, and IS-95 as well
as W-CDMA and CDMA-2000.
Simple Connectivity
The R3267/3273 provides excellent value
with its combination of spectrum and
optional modulation analyzer, so that it
can be used with applications ranging
from research and development of communication devices, modules, to production line and deployment testing of communication infrastructure equipment.
The R3267 and R3273: a new family of
analyzers to test today’s, and tomorrow’s
communication systems.
2
,
R3267/3273-1E Mar. 99
7ACP (adjacent channel leakage power) measurement
7OBW (occupied bandwidth) measurement
7Channel and total power measurement
7Harmonics measurement
7Spurious emission measurement
72-trace simultaneous measurement
7Delayed sweep/Gated sweep functions
7Peak list function
7Noise/Hz measurement
7XdB down measurement
73rd-order measurement
7%AM measurement
71 Hz resolution frequency counter
76.5-inch TFT color LCD
73.5-inch MS-DOS compatible floppy disk drive
7Standard I/O interfaces for integration:
GPIB, RS232, Parallel, and VGA
Enhanced Options
OPT.01
OPT.02
Memory Card Drive (instead of disk drive)
OPT.61 cdmaOne Analysis Software
OPT.05
Audio Demodulation Output Option (AM, FM)
OPT.62 W-CDMA Analysis Software
OPT.10
Level Tuning Option (for PDC-BS)
OPT.63 GSM/DECT Analysis Software
OPT.16
External Mixer Option (26.5 to 40 GHz, for R3273 only)
OPT.64 PDC/PHS/IS-136 Analysis Software
OPT.17
External Mixer Option (40 to 60 GHz, for R3273 only)
OPT.73 FM Deviation Analysis Software
OPT.21
High-stability Frequency Reference Option (±5 x 10-9/day)
OPT.74
Tracking Generator Option (with attenuator)
OPT.79
Tracking Generator Option (without attenuator)
Digital Modulation Analysis Option
Note: Each of the above software options requires modulation analysis option OPT.01.
,
R3267/3273-1E Mar. 99
3
R3267 Specifications
Amplitude range
Frequency
Measurement range
+30 dBm - Average noise level
Frequency range: 100 Hz to 8 GHz
Frequency Bandwidth
Frequency Band
Harmonics Order N
0
1
2
3
1
1
1
1
100 Hz to 3.5 GHz
1.6 to 3.5 GHz
3.5 to 7 GHz
6.9 to 8 GHz
Max. safety input
Average continuous power (input ATT >10 dB) +30 dBm (1 W)
DC input
0V
Display range: 10 x 10 div.
YIG-tuned Preselector built in for 1.6 to 8 GHz
Frequency read accuracy
Log mode
Linear mode
± (Frequency reading x Frequency reference accuracy + Span x Span
accuracy + 0.15 x Resolution bandwidth + 10 Hz)
Reference level range
Marker frequency counter (Span < 1 GHz)
Log mode
Linear mode
Resolution
Accuracy (S/N>25dB)
Delta counter
1Hz to 1kHz
± (Marker frequency x Frequency reference
accuracy + 5 Hz x N + 1LSD)
± (Delta frequency x Frequency reference
accuracy + 10 Hz x N + 2LSD)
-140 to +60 dBm (0.1 dB steps)
22.4 nV to 223 V
(steps of approx. 1% of the full scale)
Input attenuator range
0 to 75 dB (5 dB steps)
Dynamic range
Frequency reference accuracy
Stability
10,5,2,1,0.5 dB/div
10% of the reference level/div.
±3 x 10-8/day
±1 x 10-7/year
±5 x 10-9/day (OPT.21)
±8 x 10-8/year (OPT.21)
Frequency stability
Residual FM (zero span) <3 Hz x Np-p/0.1sec.
N: Harmonics order
Frequency drift
Same as the reference value
(After 60 min. warm-up)
Signal purity (dBc/Hz)
Offset
Frequency Band
1 kHz
10 kHz
100 kHz
1 MHz
100 Hz to 1 GHz
1 to 2.6 GHz
2.6 to 8 GHz
-100
-100
-98
-113
-110
-108
-118
-118
-112
-135
-135
-135
Average noise level (Resolution bandwidth 100 Hz, input
attenuator 0 dB, video bandwidth 1 Hz)
Frequency
Frequency Band
Average Noise Level
0
0
0
0
0
1
2
3
-90 dBm
-100 dBm
-101 dBm
-125 dBm
- (130 - f(GHz)) dBm
-125 dBm
-125 dBm
-125 dBm
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz to 3.5 GHz
1.6 to 3.5 GHz
3.5 to 7 GHz
6.9 to 8 GHz
1 dB gain compression
10 to 100 MHz
100 MHz to 8 GHz
-3 dBm
0 dBm
Spurious response
Frequency span
Range
200 Hz to 8 GHz, zero span
Accuracy
±1%
Secondary harmonics distortion
Frequency
Range Frequency Band
Mixer Level
0
1,2,3
-30 dBm
-10 dBm
Frequency
Range Frequency Band
Mixer Level
10 to 100 MHz
100 MHz to 1 GHz
1 to 3.5 GHz
1.6 to 8 GHz
0
0
0
1,2,3
-30 dBm
-30 dBm
-30 dBm
-30 dBm
Resolution bandwidth (3 dB)
<-70 dBc
<-90 dBc
Range
10 Hz to 10 MHz (1, 3, or 10 sequences), 5 MHz
3rd order intermodulation distortion
Accuracy
±25%: Resolution bandwidth = 3 MHz, 5 MHz
±15%: Resolution bandwidth = 100 Hz to 1 MHz
±25% (25ºC ± 10ºC): Resolution bandwidth = 30 Hz
Selectivity
<15:1 (Resolution bandwidth = 100 Hz to 5 MHz)
<20:1 (Resolution bandwidth = 30 Hz)
<-70 dBc
<-80 dBc
<-85 dBc
<-90 dBc
10 MHz to 3.5 GHz
> 1.6 GHz
Video bandwidth
Image/Multiple/Out-of-band response
Range
<-70 dBc (10 MHz to 8 GHz)
1 Hz to 10 MHz (1, 3, or 10 sequences), 5 MHz
Residual response (no input, input ATT 0 dB, 50 ohm termination)
Frequency sweep
Sweep time
Zero span: 1 µs to 1000 s
Span > 0 Hz: 20 ms to 1000 s
Accuracy
±3%
Trigger
Free run, line, video, external, IF
Gated sweep
Gate position/resolution
100 ns to 1 s/100 ns
Gate value/resolution
1 µs to 1 s/100 ns
Trigger
IF (Mixer input -40 dBm or more),
external trigger, external gate
Delayed sweep
Delay time/resolution
10
R3267/3273-1E Mar. ’99
100 ns to 1 s/100 ns
<-100 dBm
<-90 dBm
1 MHz to 3.5 GHz
300 kHz to 8 GHz
Amplitude accuracy
Video output
Frequency response
(input ATT 10 dB, after Preselector synchronization, for Band 1 to 3)
Connector
Frequency Range
Frequency Band
100 MHz to 3.5 GHz
50 MHz to 2.6 GHz
1.6 to 3.5 GHz
3.5 to 7.0 GHz
6.9 to 8.0 GHz
In-band Flatness
(correlation value)
0
0
1
2
3
±1.5 dB
±1.0 dB
±1.5 dB
±1.5 dB
±1.5 dB
Additional error by band switching
±0.5 dB
Flatness with 30 MHz calibration signal
as reference
±3.0 dB
(100 Hz to 8.0 GHz)
Calibration signal accuracy (30 MHz)
-10 dBm ±0.3 dB
IF gain error (after auto calibration)
0 to -50 dBm
0 to -80 dBm
±0.5 dB
±0.7 dB
Scale display accuracy (after auto calibration)
Log mode
Linear mode
0 to -90 dB
Max. ±0.85 dB
±0.2 /1 dB
±5% of reference level
VGA (15-pin, female), rear panel,
equivalent to 640 x 480 dot VGA
X-axis output
Connector
Impedance
Amplitude
BNC female, rear panel
1 kohm (nominal), DC-coupled
Approx. -5 to +5 V
Y-axis output
Connector
Impedance
Amplitude
BNC female, rear panel
220 ohm (nominal)
Approx. 2 V (at 10 dB/div.) full scale
External trigger input
Connector
Impedance
Trigger level
BNC female, rear panel
10 kohm (nominal), DC-coupled
TTL level
External gate input
Connector
Impedance
Sweep stop
Sweep
BNC female, rear panel
10 kohm (nominal), DC-coupled
During LOW on TTL level
During HIGH on TTL level
Trigger output
Connector
Amplitude
BNC female, rear panel
TTL level
Input attenuator switching error (10 dB as reference, at 15 to 75 dB)
Sound output (demodulation audio): OPT.05
Frequency Range
Error
100 Hz to 8 GHz
±1.1 dB/5 dB steps, max. 2.0 dB
Connector
Power output
Resolution bandwidth switching error
(Resolution bandwidth: 300 kHz reference, after auto calibration)
<±0.3 dB (resolution bandwidth = 100 Hz to 5 MHz)
<±1.0 dB (resolution bandwidth = 30 Hz)
Miniature monophonic jack, front panel
Max. 0.2 W, 32 ohm (nominal)
I/O
GPIB
RS232
Printer
Peripheral unit I/O
3.5-inch floppy disk drive
IEEE-488 bus connector, rear panel
D-SUB 9-pin, rear panel
D-SUB 25-pin, rear panel
D-SUB 25-pin, rear panel
Input/Output
Direct print
RF input
Connector
N-type female
Impedance
50 ohm (nominal)
VSWR (input ATT >10 dB,
at set frequency)
<1.5:1 (<3.5 GHz) (nominal)
<2.1:1 (>3.5 GHz) (nominal)
Calibration signal output
Connector
Frequency
Impedance
Amplitude
BNC female, front panel
30 MHz x (1 ± Frequency reference
determined)
50 ohm (nominal)
-10 dBm ±0.3 dB
10 MHz frequency reference output
Connector
Output impedance
Output frequency accuracy
Output amplitude range
BNC female, front panel
50 ohm (nominal)
10 MHz x Frequency reference accuracy
0 ±5 dBm
Output by ESC/P, PCL, or ESC/P raster command
General Specifications
Temperature
Operating temperature
Storage temperature
Humidity
0 to 50ºC
-20 to 60ºC
RH 85% or less (no condensation)
Power supply: Auto switching between 100 VAC and 220 VAC systems
Voltage
Power consumption
Frequency
100 VAC operation
220 VAC operation
100 V - 120 V
300 VA or less
50/60 Hz
220 V - 240 V
300 VA or less
50/60 Hz
Mass
18 kg or less (excluding options, front cover, and accessories)
10 MHz frequency reference input
Dimensions
Connector
Input impedance
Input amplitude range
Approx. 177 mm (H) x 350 mm (W) x 420 mm (D) (excluding handle, feet,
and front cover)
BNC female, rear panel
50 ohm (nominal)
-5 to +5 dBm
Accessories
Probe power source
Product Name
Model Name
±12.6 V (100 mA) (nominal)
Power cable
Input cable
N to BNC adapter
Fuse
Front cover
A01412
A01036-0150
JUG-201A/U
T6.3A/250V
21.4 MHz IF output
Connector
Impedance
BNC female, rear panel
50 ohm (nominal)
421.4 MHz IF output
Connector
Impedance
BNC female, rear panel
50 ohm (nominal)
R3267/3273-1E Mar. ’99
11
R3273 Specifications
Amplitude range
Frequency
Measurement range
Frequency range: 100 Hz to 26.5 GHz
26.5 to 60 GHz (external mixer used,
synchronization available up to 325 GHz)
+30 dBm - Average noise level
Frequency Bandwidth
Average continuous power
(input ATT>10 dB)
DC input
Frequency Band
Harmonics Order N
0
1
2
3
1
1
2
4
100 Hz to 3.5 GHz
3.5 to 7.5 GHz
7.4 to 15.4 GHz
15.2 to 26.5 GHz
Max. safety input
+30 dBm (1 W)
0V
Display range: 10 x 10 div.
Log mode
Linear mode
YIG-tuned Preselector built in for 3.5 to 26.5 GHz
10, 5, 2, 1, 0.5 dB/div.
10% of the reference level/div.
Frequency read accuracy
± (Frequency reading x Frequency reference accuracy + Span x Span
accuracy + 0.15 x Resolution bandwidth + 10 Hz)
Reference level range
Log mode
Linear mode
-140 to +60 dBm (0.1 dB steps)
22.4 nV to 223 V (steps of approx. 1% of the full scale)
Marker frequency counter (Span <1 GHz)
Resolution
Accuracy (S/N >25 dB)
Delta counter
1 Hz to 1 kHz
± (Marker frequency x Frequency reference
accuracy + 5 Hz x N + 1LSD)
± (Delta frequency x Frequency reference
accuracy + 10 Hz x N + 2LSD)
Frequency reference accuracy
Stability
±3 x 10-8/day
±1 x 10-7/year
±5 x 10-9/day (OPT.21)
±8 x 10-8/year (OPT.21)
Frequency stability
Residual FM (zero span) <3 Hz x Np-p/0.1 sec.
N: Harmonics order
Frequency drift
Same as the reference source
(After 60 min. warm-up)
Signal purity (dBc/Hz)
Offset
Frequency Band
1 kHz
10 kHz
100 kHz
1 MHz
100 Hz to 1 GHz
1 to 2.6 GHz
2.6 to 7.5 GHz
7.4 to 15.4 GHz
15.2 to 26.5 GHz
-100
-100
-98
-89
-83
-113
-110
-108
-102
-96
-118
-118
-112
-106
-100
-135
-135
-135
-129
-123
Input attenuator range
0 to 70 dB (10 dB steps)
Dynamic range
Average noise level
(Resolution bandwidth 100 Hz, input attenuator 0 dB, video
bandwidth 1 Hz)
Frequency
Frequency Band
Average Noise Level
0
0
0
0
0
1
2
3
3
-90 dBm
-100 dBm
-101 dBm
-125 dBm
- (130 - f(GHz)) dBm
-125 dBm
-122 dBm
-120 dBm
-117 dBm
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz to 3.5 GHz
3.5 to 7.5 GHz
7.4 to 15.4 GHz
15.2 to 22.0 GHz
22.0 to 26.5 GHz
1 dB gain compression
10 to 100 MHz
100 MHz to 3.5 GHz
3.5 to 7.5 GHz
7.5 to 26.5 GHz
-3 dBm
0 dBm
-10 dBm
-3 dBm
Spurious response
Frequency span
Range
200 Hz to 26.5 GHz, zero span
Accuracy
±1%
Secondary harmonics distortion
Frequency Range
Frequency Band
Mixer Level
0
1,2,3
-30 dBm
-10 dBm
Frequency Range
Frequency Band
Mixer Level
10 to 100 MHz
100 MHz to 1 GHz
1 to 3.5 GHz
3.5 to 7.5 GHz
7.5 to 26.5 GHz
0
0
0
1
2,3
-30 dBm
-30 dBm
-30 dBm
-30 dBm
-30 dBm
Resolution bandwidth (3 dB)
<-70 dBc
<-100 dBc
Range
10 Hz to 10 MHz (1, 3, or 10 sequences), 5 MHz
3rd order intermodulation distortion
Accuracy
±25%: Resolution bandwidth = 3 MHz, 5 MHz
±15%: Resolution bandwidth = 100 Hz to 1 MHz
±25%(25 ºC ± 10 ºC):Resolution bandwidth= 30 Hz
Selectivity
<15:1 (Resolution bandwidth = 100 Hz to 5 MHz)
<20:1 (Resolution bandwidth = 30 Hz)
Video bandwidth
Range
1 Hz to 10 MHz (1, 3, or 10 sequences), 5 MHz
Frequency sweep
<-70 dBc
<-80 dBc
<-85 dBc
<-70 dBc
<-75 dBc
10 MHz to 3.5 GHz
>3.5 GHz
Image/Multiple/Out-of-band response
<-70 dBc (10 MHz to 18 GHz)
<-60 dBc (10 MHz to 23 GHz)
<-50 dBc (10 MHz to 26.5 GHz)
Sweep time
Zero span: 1 µs to 1000 s
Span >0 Hz: 20 ms to 1000 s
Residual response (no input, input ATT 0 dB, 50 ohm termination)
Accuracy
±3%
Trigger
Free run, line, video, external, IF
<-100 dBm
<-90 dBm
1 MHz to 3.5 GHz
300 kHz to 26.5 GHz
Gated sweep
Gate position/resolution 100 ns to 1 s/100 ns
Gate width/resolution
1 µs to 1 s/100 ns
Trigger
IF (Mixer input -40 dBm or more),
external trigger, external gate
Delayed sweep
Delay time/resolution
100 ns to 1 s/100 ns
Please be sure to read the product manual thoroughly before using the products.
Specifications may change without notification.
R3267/3273-1E Mar. ’99
12
Amplitude accuracy
1st LO output
Frequency response
(input ATT 10 dB, after Preselector synchronization, for Band 1 to 3)
Connector
Impedance
Frequency range
Amplitude
Frequency Range
Frequency Band
100 Hz to 3.5 GHz
50 MHz to 2.6 GHz
3.5 to 7.5 GHz
7.4 to 15.4 GHz
15.4 to 26.5 GHz
In-band Flatness
(correlation value)
0
0
1
2
3
±1.5 dB
±1.0 dB
±1.5 dB
±3.5 dB
±4.0 dB
Additional error by band switching
±0.5 dB
Flatness with 30 MHz calibration signal as
reference
±5.0 dB
(100 Hz to 26.5 GHz)
SMA female, front panel
50 ohm (nominal)
3.921 to 7.921 GHz
>+10 dBm
Video output
Connector
VGA (15-pin, female), rear panel,
equivalent to 640 x 480 dot VGA
X-axis output
Calibration signal accuracy (30 MHz)
-10 dBm ±0.3 dB
IF gain error (after auto calibration)
0 to -50 dBm
0 to -80 dBm
±0.5 dB
±0.7 dB
Scale display accuracy (after auto calibration)
Log mode
Linear mode
0 to -90 dB
Max. ±0.85 dB
±0.2/1 dB
±5% of reference level
Input attenuator switching error (10 dB as reference, at 20 to 70 dB)
Frequency Range
Error
100 Hz to 12.4 GHz
12.4 to 18 GHz
18 to 26.5 GHz
±1.1/10 dB steps, max. 2.0 dB
±1.3/10 dB steps, max. 2.5 dB
±1.8/10 dB steps, max. 3.5 dB
Resolution bandwidth switching error
(Resolution bandwidth: 300 kHz reference, after auto calibration)
<±0.3 dB (resolution bandwidth = 100 Hz to 5 MHz)
<±1.0 dB (resolution bandwidth = 30 Hz)
Input/Output
RF input
Connector
Impedance
Amplitude
BNC female, rear panel
1 kohm (nominal), DC-coupled
Approx. -5 to +5 V
Y-axis output
Connector
Impedance
Amplitude
BNC female, rear panel
220 ohm (nominal)
Approx. 2 V (at 10 dB/div.) full scale
External trigger input
Connector
Impedance
Trigger level
BNC female, rear panel
10 kohm (nominal), DC-coupled
TTL level
External gate input
Connector
Impedance
Sweep stop
Sweep
BNC female, rear panel
10 kohm (nominal), DC-coupled
During LOW on TTL level
During HIGH on TTL level
Trigger output
Connector
Amplitude
BNC female, rear panel
TTL level
Sound output (demodulation audio): OPT.05
Connector
Power output
Miniature monophonic jack, front panel
Max. 0.2 W, 32 ohm (nominal)
I/O
GPIB
RS232
Printer
Peripheral unit I/O
3.5-inch floppy disk drive
IEEE-488 bus connector, rear panel
D-SUB 9-pin, rear panel
D-SUB 25-pin, rear panel
D-SUB 25-pin, rear panel
Connector
N-type female (changeable to SMA)
Impedance
50 ohm (nominal)
VSWR (input ATT>10 dB,
at set frequency)
<1.5:1 (<3.5 GHz) (nominal)
<2.1:1 (>3.5 GHz) (nominal)
Direct print
BNC female, front panel
30 MHz x (1 ± Frequency reference
determined)
50 ohm (nominal)
-10 dBm ±0.3 dB
General Specifications
Output by ESC/P, PCL, or ESC/P raster command
Calibration signal output
Connector
Frequency
Impedance
Amplitude
10 MHz frequency reference output
Connector
Output impedance
Output frequency accuracy
Output amplitude range
BNC female, rear panel
50 ohm (nominal)
100 MHz x Frequency reference accuracy
0 dBm ±5 dB
Temperature
Operating temperature
Storage temperature
Humidity
0 to 50ºC
-20 to 60ºC
RH 85% or less (no condensation)
Power supply: Auto switching between 100 VAC and 220 VAC systems
Voltage
Power consumption
Frequency
100 VAC operation
220 VAC operation
100 V - 120 V
300 VA or less
50/60 Hz
220 V - 240 V
300 VA or less
50/60 Hz
10 MHz frequency reference input
Connector
Input impedance
Input amplitude range
BNC female, rear panel
50 ohm (nominal)
-5 to +5 dBm
Mass
18 kg or less (excluding options, front cover, and accessories)
Dimensions
Probe power source
Approx. 177 mm (H) x 350 mm (W) x 420 mm (D) (excluding handle,
feet, and front cover)
±12.6 V (100 mA) (nominal)
21.4 MHz IF output
Connector
Impedance
Accessories
BNC female, rear panel
50 ohm (nominal)
421.4 MHz IF output
Connector
Impedance
BNC female, rear panel
50 ohm (nominal)
Product Name
Model Name
Power cable
Input cable
N to BNC adapter
Fuse
Front cover
A01412
A01036-0150
JUG-201A/U
T6.3A/250V
R3267/3273-1E Mar. ’99
13