Tecom® Series / Software
Titan
Software
TS9002
Overview
Features
Titan is a software tool for programming and controlling a
Challenger security system. Titan can be used on-site or it can be
used remotely via modem or IP connection. Titan is typically used
by installers with a laptop PC to program Challenger systems; but
can also be used by small facilities to maintain and control their
Challenger system.
•
Supports all Challenger series control panels
•
Flexible connectivity options, supporting USB, IP, modem or
serial
•
Fully integrated, remote firmware upgrade utility for Challenger10
panels
•
Challenger V8 to Challenger10 migration tool included
Titan provides a simple and easy-to-use interface for programming
the Challenger system. Titan also provides the ability for
technicians to import and export system configurations to allow for
off-site programming or system backups.
•
Full upload and download of panel configuration
•
Back-up and archiving facilities for both database and history
information
•
By using serial and/or IP connections, you can connect to
multiple Challenger panels simultaneously.
•
The optional TS0870P Smart Card Programmer is used to
create highly-secure, password-protected Smart Cards and
Smart Fobs for access control or for pay-per-use credit
applications.
•
Supports multiple card reader technologies
•
Live event log
•
Up to 20 user-defined fields that can contain valuable
customisable information on all system users
•
Generates a wide range of reports
•
Advanced user search facilities enable operators to quickly
search the database for user records
•
Runs on Windows-based PCs
Service technicians can use Titan to connect remotely to Challenger
panels to manage users, for routine maintenance and fault diagnosis.
Remote connection capability helps to avoid on-site service calls.
Titan operators can use the optional integrated photo ID module to
add cardholders’ photographs to the Titan database and to create
card layouts. TS0870P Smart Card Programmer integration allows
for custom encoding of cards with unique encryption codes for highsecurity applications.
www.interlogix.com.au
Interlogix
National Sales Enquiries
Titan Software
1300 361 479
Ground Floor
10 Ferntree Place
Notting Hill, Victoria 3168
T: +61 3 239 1200
W: www.interlogix.com.au
TS9002
System diagram
PSTN line via Challenger dialler
Ethernet
USB
RS-232
Challenger control panel
Titan
Note: This is only an indication. Contact your security professional for advice on expanding your system
Specifications
Supported Devices
Network and Communications
Challenger10
ChallengerSE
ChallengerLE
Challenger V8
Workstations (hosts/clients)
1
Database engine
Borland Paradox
Panel connection options
IP
RS-232 serial
USB
Dialler
Features
Photo ID Integration
Yes (optional license) - refer part number TS9006
Smart Card Programmer
Yes
Maximum Challenger panels
1,024 panels (maximum 16 simultaneous connections)
Maximum users/badges
65,535 users per Challenger panel with full memory expansion
Minimum PC Requirements
RAM
512 MB
Monitor
1024 x 768 resolution, 16-bit colour
Network card
Required for IP connection
Serial port
Required for direct serial connection
USB port
Required for direct USB connection (Challenger10 only) or external modem
Hard disk space
40GB
Windows 10 Pro or above (64-bit)
Operating system
Windows 8.1 Pro or above (64-bit)
Windows 7 Professional or above (64-bit)
Ordering information
TS9002
Titan base license including installation CD
Specifications subject to change without notice.
Copyright © 2015 UTC Fire & Security Australia Pty Ltd.
All rights reserved.
UTC Fire & Security Australia Pty Ltd trading as Interlogix is a UTC Building & Industrial Systems company.
TS9002-DS-151015-9