I N S TA L L AT I O N P assenger f loorboard mount accent : - 1 0 - up 7777 PartS Included 2 Floorboard Mount Covers 1 Alcohol Pad 1 Installation Instructions Please read and understand entire instructions before starting In order to protect you and others from possible injury and/or property damage or loss, please pay close attention to all instructions, warnings, cautions and attention notes regarding the use and care of this product. WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY. CAUTION! This indication alerts you to the fact that ignoring the contents described herein can result in potential injury or material damage. ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality. Strictly observe the following guidelines in order to use the product properly and avoid potentially dangerous accidents. Procedure NOTE: These covers do not work with Kuryakyn retractables STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface; turn off the ignition and allow the engine to cool. STEP 2 "Dry" fit the new Floorboard Mount Cover over the passenger floorboard mount. STEP 3 Remove cover and clean mount with the supplied alcohol pad. STEP 4 On the inside of the Mount Cover, rub the tape backing with your fingernail to activate the adhesive. Remove tape backing. Place the cover on top of the mount and press firmly for one full minute. Full bonding will occur after 24 hours. ATTENTION! The adhesive will not bond correctly if applied at temperatures less than 50˚F. Do not attempt this installation in temperatures less than 50˚F. STEP 5 Repeat steps 2-4 on the opposite side. 7777-11HD-0910 CUSTOMER SERVICE 877.370.3604 (toll free) INSTALLATION QUESTIONS firstname.lastname@example.org or call 715.247.2983 LIMITED WARRANTY Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions: • Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s). • The product must be properly installed, maintained and operated under normal conditions. • Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products. • Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer. • Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended. • Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. Components of Küryakyn products containing L.E.D.s will be warranted for defects in materials and workmanship for 3 years from the date of purchase. • Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer. ABOUT OUR CATALOG You’ll find all our innovations for H-D, GL and Metric Cruisers in our annual catalogs. Order online today–select the ”CATALOGS” icon. Each Küryakyn® product comes with a Proof-of-Purchase good for a complimentary catalog. Details in packaging. Be sure to ask your local dealer about other Küryakyn ® products, the motorcycle parts and accessories designed for riders by riders. ©2005 Küryakyn USA® All Rights reserved.