Rittal – TopTherm Filter Fans

Rittal –
TopTherm Filter Fans
More pressure.
Higher air flow rates.
2
Rittal — TopTherm Filter Fans
Installation without tools
• Snap-in mounting for easy installation
• Simple reversal of the air flow direction by turning
the fan module
• Flexible positioning of the power connection
• Spring clamp terminals for electrical connection
without tools
• Louvered grille latch for fast filter mat replacement
without tools
Efficient technology
• Air throughput from 12 - 424 cfm (20 to 700 m³/h)
• New diagonal fan technology for greater pressure
stability and constant air flow when installed,
even with a contaminated filter mat
• Reduced installation depth
• Flow-optimized air routing
• Extended service life of filter mats and thus longer
maintenance intervals
• UL Type 12 (IP 54) out of the box
• All fan models available with EMC shielding
Air routing
• Intelligent combination of radial and axial fan
technology for most fan models
• Air flow spreads diagonally from the fan, promoting
even air distribution throughout the enclosure
Additional environmental protection
• Hose-proof hoods prevent the entry of water
• Ratings of up to UL Type 4X are achieved with
addition of hood
Performance chart —
new vs. old filter fan design
Volume Flow (CFM)
60
120
180
240
300
360
250
1.2
200
1.0
Static Pressure (Pa)
st
150
0.8
100
0.6
50
0.4
.
V
0
0
100
200
300
400
Static Pressure (inches of H2O)
0
0.2
500
600
Volume Flow (m3/h)
= Resistance curve
Outlet filter 3243.200
= old 50 Hz
Filter fan 3326.xxx
= new 50 Hz
Filter fan 3243.xxx
Rittal — TopTherm Filter Fans
3
Filter Fan
Protection Ratings:
NEMA 12/IP 54 standard
IP 55 with additional fine filter mat
NEMA 3R/4/4X/IP 56 with hoseproof hood
Property Rights:
German Registered Design
No. M 93 04 846
B2
T2
T1
B = Width
T = Depth
H2
Certifications:
CE - 3527009
UL/cUL - E76083
H1
Configuration:
Filter fan unit ready for
installation, including filter mats,
self adhesive mounting template
and instructions.
B1
Air Displacement: 12 - 39 cfm (20 - 66 m3/h)
Part No. (Filter Fan and Filter Unit)
3237.100
3237.110
3237.124
3238.100
3238.110
Part No. (Filter Fan and Filter Unit - EMC)
3237.600
–
–
3238.600
–
–
230, 50/60
115, 50/60
24 (DC)
230, 50/60
115, 50/60
24 (DC)
Rated operating voltage V, Hz
Dimensions inches (mm)
Max. installation depth mm
B1/H1
5 x 5 (116.5 x 116.5)
6 x 6 (148.5 x 148.5)
B2/H2
4 x 4 (92 x 92)
5 x 5 (124 x 124)
T1
1 (16)
1 (16)
T2
2 (43)
2 (58.5)
12/15 cfm (20/25 m3/h)
Air throughput, unimpeded air flow
Air throughput with outlet filter
including standard filter mat cfm
12 cfm (20 m3/h)
32/39 cfm (55/66 m3/h)
Self-starting shaded
pole motor
Rated current
0.065 A/0.052 A
Power consumption
Self-starting shaded
pole motor
DC motor
0.12 A/0.1 A
11 W/9 W
0.125 A
0.12 A/0.11 A
3W
Pre-fuse
DC motor
0.24 A/0.22 A
0.23 A
19 W/18 W
5.5 W
46/49 dB (A)
46 dB (A)
2A
Noise level
38/43 dB (A)
38 dB (A)
Operating temperature range F° (C°)
5 to 131° F (–15 to +55° C)
Storage temperature range F °(C°)
-22 to 158° F (–30 to +70° C)
Color
RAL 7035
Part No. outlet filter
3237.200
3238.200
Part No. outlet filter – EMC
3237.060
3238.060
PU
Filter mats
5
3321.700
3322.700
Filter mats – EMC
5
3237.066
3238.066
Fine filter mats
5
–
3238.055
Hose-proof hood - 304 stainless steel
1
Hose-proof hood - RAL 7035
3237.080
1)
3238.0802)
1
3237.085
1)
3238.0853)
3237.020
Blanking cover
1
Thermostat
1
3110.000
3238.020
Digital temperature display
1
3114.200
Hygrostat
1
3118.000
Speed control
1
3120.200
Special voltages and colors available on request. We reserve the right to make technical modifications. 1) UL type 3R
4
32 cfm (55 m3/h)
1 x 3238.200: 25/29 cfm (43/50 m3/h)
2 x 3238.200: 27/33 cfm (46/56 m3/h)
1 x 3237.200: 9/11 cfm (15/18 m3/h)
Fan motor
Accessories
3238.124
For additional technical information visit www.rittal-corp.com
2)
UL type 4X
3)
UL type 3R/4
Rittal — TopTherm Filter Fans
Filter Fan
Air Displacement: 62 - 71 cfm (105 - 120 m3/h)
Part No. (Filter Fan and Filter Unit)
3239.100
3239.110
3239.124
Part No. (Filter Fan and Filter Unit - EMC)
3239.600
–
–
115, 50/60
24 (DC)
Rated operating voltage V, Hz
230, 50/60
Dimensions inches (mm)
B1/H1
8 x 8 (204 x 204)
B2/H2
7 x 7 (177 x 177)
T1
Max. installation depth inches (mm)
1 (24)
T2
3.5 (90)
62/71 cfm (105/120 m3/h)
Air throughput, unimpeded air flow
62 cfm (105 m3/h)
1 x 3239.200: 51/59 cfm (87/100 m³/h)
2 x 3239.200: 55/64 cfm (93/108 m³/h)
1 x 3240.200: 58/65 cfm (98/111 m³/h)
Air throughput with outlet filter
including standard filter mat
Diagonal fan
Self-starting shaded pole motor
Rated current
0.12 A/0.11 A
DC motor
0.24 A/0.22 A
Power consumption
0.23 A
19 W/18 W
5.5 W
Pre-fuse
2A
Noise level
46/49 dB (A)
46 dB (A)
Operating temperature range F° (C°)
-5 to 131° F (-15 to +55° C)
Storage temperature range F° (C°)
-22 to 158° F (-30 to +70° C)
Color
RAL 7035
Part No. outlet filter
3239.200
PU
Filter mats
5
3171.100
Filter mats – EMC
5
3239.066
Fine filter mats
5
3181.100
Hose-proof hood - 304 stainless steel
1
3239.0801)
Hose-proof hood - RAL 7035
1
3239.0852)
Blanking cover
1
3239.020
Thermostat
1
3110.000
Digital temperature display
1
3114.200
Hygrostat
1
3118.000
Speed control
1
3120.200
Special voltages and colors available on request. We reserve the right to make technical modifications. UL type 4X
1)
Performance chart 3237.xxx
Performance chart 3238.xxx
Volume Flow (CFM)
Volume Flow (CFM)
12
15
0
.10
20
.08
15
.06
10
.04
5
.02
0
0
0
5
10
15
20
25
Volume Flow (m3/h)
6
12
18
24
Volume Flow (CFM)
29
35
41
0
12
24
35
47
59
71
70
.28
120
.48
60
.24
100
.40
50
.20
80
.32
40
.16
60
.24
30
.12
20
.08
40
.16
10
.04
20
.08
0
0
0
10
20
30
40
50
60
70
Volume Flow (m3/h)
0
Static Pressure (inches of H2O)
9
UL type 3R/4
Performance chart 3239.xxx
Static Pressure (inches of H2O)
6
Static Pressure (Pa)
3
Static Pressure (inches of H2O)
Static Pressure (Pa)
0
25
2)
Static Pressure (Pa)
Accessories
0
0
20
40
60
80
100
120
Volume Flow (m3/h)
Performance Curve 1 x 3237.200
Performance Curve 1 x 3238.200
Performance Curve 1 x 3239.200
Performance Curve 2 x 3237.200
Performance Curve 2 x 3238.200
Performance Curve 2 x 3239.200
3237.xxx 50 Hz
3238.xxx 50 Hz
3239.xxx 50 Hz
3237.xxx 60 Hz
3238.xxx 60 Hz
3239.xxx 60 Hz
Rittal — TopTherm Filter Fans
For additional technical information visit www.rittal-corp.com
5
Filter Fan
Air Displacement: 106 - 147 cfm (180 - 250 m3/h)
Part No. (Filter Fan and Filter Unit)
3240.100
3240.110
3240.124
3241.100
3241.110
Part No. (Filter Fan and Filter Unit - EMC)
3240.600
–
–
3241.600
–
–
Rated operating voltage V, Hz
230, 50/60
115, 50/60
24 (DC)
230, 50/60
115, 50/60
24 (DC)
Dimensions inches (mm)
B1/H1
10 x 10 (255 x 255)
B2/H2
9 x 9 (224 x 224)
T1
.98 (25)
Max. installation depth inches (mm)
T2
4.21 (107)
106/94 cfm (180/160 m /h)
Air throughput, unimpeded air flow
3
106 cfm (180
m3/h)
Diagonal fan
Self-starting shaded pole motor
Rated current
0.21 A/0.19 A
Power consumption
0.42 A/0.38 A
35 W/34 W
Pre-fuse
2A
Noise level
4A
51/46 dB (A)
135 cfm (230
m3/h)
135/147 cfm (230/250 m3/h)
1 x 3240.200: 81/71 cfm (138/121 m3/h)
2 x 3240.200: 97/82 cfm (165/140 m3/h)
1 x 3243.200: 97/82 cfm (165/140 m3/h)
Air throughput with outlet filter
including standard filter mat
1 x 3240.200: 108/120 cfm (183/205 m3/h)
2 x 3240.200: 119/135 cfm (203/230 m3/h)
1 x 3243.200: 119/135 cfm (203/230 m3/h)
DC motor
Self-starting shaded pole motor
0.43 A
0.26 A/0.24 A
0.52 A/0.48 A
DC motor
0.78 A
11 W
40 W/42 W
19 W
2A
4A
2A
51 dB (A)
54/56 dB (A)
54 dB (A)
Operating temperature range F° (C°)
-22 to 131° F (–30 to +55° C)
Storage temperature range F° (C°)
-22 to 158° F (–30 to +70° C)
Color
RAL 7035
Part No. outlet filter
3240.200
PU
Filter mats
5
3172.100
Filter mats – EMC
5
3240.066
Fine filter mats
5
3182.100
Hose-proof hood - 304 stainless steel
1
3240.0801)
Hose-proof hood - RAL 7035
1
3240.0852)
Blanking cover
1
3240.020
Thermostat
1
3110.000
Digital temperature display
1
3114.200
Hygrostat
1
3118.000
Speed control
1
3120.200
Special voltages and colors available on request. We reserve the right to make technical modifications. UL type 4X
1)
Performance chart 3240.xxx
24
47
71
Volume Flow (CFM)
94
118
.32
60
.24
40
.16
20
.08
0
40
80
120
160
180
0
Static Pressure (Pa)
80
Static Pressure (Pa)
0
160
.40
Static Pressure (inches of H2O)
100
0
UL type 3R/4
Performance chart 3241.xxx
Volume Flow (CFM)
0
2)
24
47
71
94
118
141
.64
140
.56
120
.48
100
.40
80
.32
60
.24
40
.16
20
.08
0
0
Volume Flow (m3/h)
40
80
120
160
200
Static Pressure (inches of H2O)
Accessories
6
3241.124
0
240
Volume Flow (m3/h)
Performance Curve 1 x 3240.200
Performance Curve 1 x 3241.200
Performance Curve 2 x 3240.200
Performance Curve 2 x 3241.200
3240.xxx 50 Hz
3241.xxx 50 Hz
3240.xxx 60 Hz
3241.xxx 60 Hz
For additional technical information visit www.rittal-corp.com
Rittal — TopTherm Filter Fans
Filter Fan
Air Displacement: 323 - 453 cfm (550 - 770 m3/h)
Part No. (Filter Fan and Filter Unit)
3243.100
3243.110
3244.100
3244.110
Part No. (Filter Fan and Filter Unit - EMC)
3243.600
–
3244.600
–
–
Rated operating voltage V, Hz
230, 50/60
115, 50/60
230, 50/60
115, 50/60
400/460, 3~, 50/60
Dimensions inches (mm)
B1/H1
13 x 13 (323 x 323)
B2/H2
12 x 12 (292 x 292)
T1
Max. installation depth inches ( mm)
1 (25)
T2
4½ (118.5)
5 (130.5)
323/353 cfm (550/600 m /h)
412/424 cfm (700/770 m3/h)
1 x 3243.200: 259/289 cfm (440/490 m3/h)
2 x S243.200: 300/330 cfm (510/560 m3/h)
1 x 3243.200: 320/359 cfm (544/610 m3/h)
2 x 3243.200: 371/406 cfm (630/690 m3/h)
Air throughput, unimpeded air flow
3
Air throughput with outlet filter
including standard filter mat
Diagonal fan
1~ capacitor motor
Rated current
Power consumption
Rotary current motor
0.37 A/0.39 A
0.78 A/0.80 A
0.43 A/0.6 A
0.9 A/1.25 A
0.17 A/0.21 A
70 W/87 W
75 W/90 W
95 W/135 W
100 W/145 W
93 W/140 W
6A
4A
6A
Motor circuit-breaker
Pre-fuse
4A
Noise level
59/61 dB (A)
65/66 dB (A)
Operating temperature range
-22 to 131° F (–30 to +55° C)
Storage temperature range
-22 to 158° F (–30 to +70° C)
Color
RAL 7035
Part No. outlet filter
3243.200
Part No. outlet filter – EMC
3243.060
–
3243.060
–
–
PU
Filter mats
5
3173.100
Filter mats – EMC
5
3243.066
Fine filter mats
5
3183.100
Hose-proof hood - 304 stainless steel
1
3243.0801)
Hose-proof hood - RAL 7035
1
3243.0852)
Blanking cover
1
3243.020
Thermostat
1
3110.000
Digital temperature display
1
3114.200
Hygrostat
1
3118.000
Speed control
1
3120.200
Special voltages and colors available on request. We reserve the right to make technical modifications. 1) UL type 4X
Performance chart 3243.xxx
177
235
Volume Flow (CFM)
294
Static Pressure (Pa)
300
250
1.6
1.2
350
1.4
1.0
.80
150
.60
100
.40
50
.20
0
100
200
300
400
500
59 118 177 235 294 353 412 471
400
200
0
0
353
1.4
0
600
Static Pressure (Pa)
118
Static Pressure (inches of H2O)
59
UL type 3R/4
Performance chart 3244.xxx
Volume Flow (CFM)
0
350
2)
300
1.2
250
1.0
200
.80
150
.60
100
.40
50
.20
0
0
Volume Flow (m3/h)
100 200 300 400 500 600 700 800
Static Pressure (inches of H2O)
Accessories
Rittal — TopTherm Filter Fans
3244.140
0
Volume Flow (m3/h)
Performance Curve 1 x 3243.200
Performance Curve 1 x 3244.200
Performance Curve 2 x 3243.200
Performance Curve 2 x 3244.200
3243.xxx 50 Hz
3244.xxx 50 Hz
3243.xxx 60 Hz
3244.xxx 60 Hz
For additional technical information visit www.rittal-corp.com
7
Accessories
Hose-proof hoods
For filter fan units/outlet filters
When the hose-proof hood is mounted above the
filter fan unit or outlet filter a rating of IP 56 (UL
4X) to EN 60 529/10.91 is achieved. Particularly
suitable for use in the food industry.
Material:
Stainless steel
Painted steel RAL 7035 (light gray)
Gasket: silicone, compliant with FDA 21 CFR
177.2600
Protection Ratings:
In conjunction with the filter fan units/outlet filters,
UL Type 3R, 4 or 4X is met.
UL and cUL recognized
Dimensions
inches (mm)
9x6x2
3237...
(230 x 150 x 40)
10 x 7 x 2
3238...
(245 x 176 x 55)
13 x 9 x 2
3239...
(33 x 233 x 55)
3240,
15 x 11 x 3
3241...
(390 x 282 x 85)
3243,
19 x 14 x 4
3244...
(480 x 350 x 110)
1)
UL Type 3R
2)
UL Type 3R/4
3)
UL Type 4X
For
Part No.
Stainless
Part No.
RAL 7035
3237.0801)
3237.0851)
3238.0803)
3238.0852)
3239.0803)
3239.0852)
3240.0803)
3240.0852)
3243.0803)
3243.0852)
UL file: E76083
Outlet filters
For ventilation by convection, an outlet filter can
be installed in the upper and lower sections of the
modular enclosure.
Material:
ABS, material resistance to UL 94-V0
Color:
RAL 7035 (light gray)
Note:
EMC version must use EMC spare filter mat for
replacement to ensure EMC shielding
Dimensions
Part No.
inches (mm)
RAL 7035
5 x 1 (116 x 16)
3237.200
6 x 1 (148 x 16)
3238.200
8 x 1 (204 x 24)
3239.200
10 x 1 (255 x 25)
3240.200
13 x 1 (323 x 25)
3243.200
Special colors on request
Part No.
EMC
3237.060
3238.060
3239.060
3240.060
3243.060
Protection Ratings:
UL, cUL recognized
UL file: E76084
Configuration:
Outlet filter including standard filter mat.
Replacement filter mats
For filter fans
Made of random filter non-woven polyester.
Temperature resistant up to 212º F (100º C), selfextinguishing, Class F1 according to DIN 53 538.
Provides reliable filtration of almost all types of
dust down to 10 micron grain size.
Material:
Synthetic fiber.
8
For filter fan
units
3321
and 3237. . . .
3322
and 3238. . . .
3323
and 3239. . . .
3324, 3325,
3240
and 3241. . . .
3326
and 3243. . . .
3327
and 3244. . . .
Inch and pound measurements are rounded to the nearest whole number
H x W x D inches
(mm)
4 x 4 x 0.4
(89 x 89 x 10)
5 x 5 x 0.5
(120 x 120 x 12)
7 x 7 x 0.7
(173 x 173 x 17)
9 x 9 x 0.7
(221 x 221 x 17)
11 x 11 x 0.7
(289 x 289 x 17)
11 x 11 x 0.4
(289 x 289 x 10)
PU
Part No.
5
3321.700
5
3322.700
5
3171.100
5
3172.100
5
3173.100
5
3327.700
Rittal — TopTherm Filter Fans
Accessories
Fine filter mats
For filter fans
Used for extremely fine dust with particle sizes
below 10 microns. Made of random filter nonwoven polyester. Temperature resistant up to
212º F (100º C), self-extinguishing, Class F1
according to DIN 53 438. Anticipate higher air
resistance when fine filter mats are used.
Installation note:
Place fine filter mat behind standard filter mat,
closer to the fan motor.
For filter fan units/
outlet filters
3238...
3323 . . ./3239
3240 . . ./3241 . . .
3324 . . ./3325 . . .
3243. . ./3244. . .
3326. . ./3327. . .
HxWxD
inches (mm)
4.7 x 4.7 x 0.5
(120 x 120 x 12)
7 x 7 x 0.5
(173 x 173 x 12)
9 x 9 x 0.5
(221 x 221 x 12)
11 x 11 x 0.5
(289 x 289 x 12)
Material:
Copper-nickel coated synthetic fiber.
Contaminated side: closed structure
Blanking cover
If existing mounting cut-outs for fan or outlet filters
need to be closed to achieve a higher protection
category, the filter mat of the fan or outlet filter can
simply be replaced with a blanking cover; welding
or other mechanical modification of the enclosure
is not necessary.
Part No.
5
3238.055
5
3181.100
5
3182.100
5
3183.100
Material:
Synthetic fiber.
Clean air side: closed structure.
Replacement filter mats
For EMC shielded filter fans
Supports the EMC shielding properties of Rittal
EMC filter fans. Made of random filter nonwoven polyester and additional copper coating.
Temperature resistant up to 212º F (100º C), selfextinguishing, Class F1 according to DIN 53 428.
Provides reliable filtration for almost all types of
dust down to 10 micron grain size.
PU
For filter fan
3237.6xx, 3237.060
3238.6xx, 3238.060
3239.6xx, 3239.060
3240.6xx, 3241.6xx,
3240.060
3243.6xx, 3243.060,
3244.6xx, 3245.6xx
For filter fan
3237. . . .
3238. . . .
3239. . . .
3240. . . ./3241. . . .
3243. . . ./3244. . . .
3245. . . .
Filter
class
according
to DIN EN
779
G2
G2
G3
PU
Part No.
5
5
5
3237.066
3238.066
3239.066
G3
5
3240.066
G3
5
3243.066
Part No.
3237.020
3238.020
3239.020
3240.020
3243.020
Material:
Plastic
Protection category:
NEMA 12/IP 54
Speed control
Temperature-dependent speed control for Rittal
fan and filter units. Dual rated 115/230 V, 50/60 Hz
AC for noise reduction and to save energy in partload operation.
Technical Specifications:
•For mounting on 35 mm support rail to DIN EN
50 022
•Rated operating voltage: 230 V (AC)/115 V (AC)
•Setting range: +68 to +131° F (+20 to +55° C)
•Phase cross-over controller
Rittal — TopTherm Filter Fans
PU
1
Part No.
3120.200
•Maximum fan output: 300 W
•Dimensions inches (mm): 4.1 x 3.5 x 2.4 (105 x 91 x 60)
Protection Rating:
•UL file: E203342
For additional technical information visit www.rittal-corp.com
9
Accessories
Enclosure thermostat
The enclosure thermostat is particularly suitable
to control filter fans but can also be used to signal
and monitor the temperature inside an enclosure.
Technical Specifications:
•Bi-metal sensor acts as a temperature-sensitive
element with thermal feedback
•Contact: 1 pole, spring loaded switch
elemement
•Permissible contact load:
Category 5 – 3 (heating)
AC 10 (4)1) A,
DC = 30 W
Category 5 – 4 (cooling)
AC 5 (4)1) A,
DC = 30 W
1)
= Inductive load at cos j = 0.6
•Setting range 41 to 140° F (+5 to +60° C)
•Weight approximately 4 oz (105 grams)
•Dimensions 3 x 3 x 1" (71 x 71 x 33 mm)
•Switching difference approximately 1 K ± 0.8 K
•A broad voltage spectrum, just one model
covers 24 to 230 V.
•Time-saving connection technique using a
terminal strip with a screw connection from the
outside.
Voltage
230/115/60/48/24 V AC
60/48/24 V DC
Part No.
3110.000
•Flexible mounting on a vertical or horizontal 1"
(35 mm) support rail to EN 50 022, and snap
fastening in the TS/ES enclosure section using
the supplied adaptor.
Protection Ratings:
UL, cUL recognized,CE,VDE
UL file: E174004
Hygrostat
The hygrostat switches on the fan when a
preset relative humidity level in the enclosure is
exceeded. This maintains the relative humidity in
the enclosure above the dew point and prevents
condensation in the cabinet or on components.
Voltage
24 - 230 V (AC/DC)
Part No.
3118.000
Technical Specifications:
•Contact population: Single-pole change-over
contact as a quick-break contact
•Permissible contact load:
AC ~ 5 (0.2)1) A
DC = maximum 20 W
1)
= Inductive load at cos j = 0.6
•Setting range 50 – 100% relative humidity
•Weight approximately 4 oz (100 g)
•Dimensions 3 x 3 x 1" (71 x 71 x 33.5 mm)
•Switching difference approximately 4%
•A broad voltage range, only one model covers
24 to 230 V.
•Time-saving connection technique using a
terminal strip with a screw connection from the
outside.
•Flexible mounting on a vertical or horizontal 1"
(35 mm) support rail to EN 50 022, and snap
fastening in the TS/ES enclosure section using
the supplied adaptor.
10
Inch and pound measurements are rounded to the nearest whole number
Rittal — TopTherm Filter Fans
Filter Fan Cross Over
Old vs. New Design – Conversion Made Easy
As with all products, Rittal continuously implements design improvements and new technology. Our entire line of filter fans has
been updated to a new design and, because they have been engineered to fit the same cut-outs as our prior fan design, they are
easily integrated into your application. The table below makes it easy to transition from the prior design to the new one.
Air throughput
unimpeded airflow
12/15 cfm
(20/25 m3/h)
32/39 cfm
(55/66 m3/h)
62/71 cfm
(105/120 m3/h)
Cut-out dimensions
inches (mm)
4 x 4 (92 x 92)
5 x 5 (124 x 124)
7 x 7 (177 x 177)
24 V
230 V
115 V
400 V/460 V
EMC fan and filter unit,
230 V
Outlet filter
EMC outlet filter
106/94 cfm
(180/160 m3/h)
135/147 cfm
(230/250 m3/h)
9 x 9 (224 x 224)
323/353 cfm
(550/600 m3/h)
412/424 cfm
(700/770 m3/h)
12 x 12 (292 x 292)
new
3237.124
3238.124
3239.124
3240.124
3241.124
–
old
3321.027
3322.027
3323.027
3324.027
3325.027
–
–
–
new
3237.100
3238.100
3239.100
3240.100
3241.100
3243.100
3244.100
3327.107
old
3321.107
3322.107
3323.107
3324.107
3325.107
3326.107
new
3237.110
3238.110
3239.110
3240.110
3241.110
3243.110
3244.110
old
3321.117
3322.117
3323.117
3324.117
3325.117
3326.117
3327.117
new
–
–
–
–
–
–
3244.140
old
–
–
–
–
–
–
3327.147
new
3237.600
3238.600
3239.600
3240.600
3241.600
3243.600
3244.600
old
3321.607
3322.607
3323.607
3324.607
3325.607
3326.607
3327.607
new
3237.200
3238.200
3239.200
3240.200
3243.200
old
3321.207
3322.207
3323.207
3325.207
3326.207
new
3237.060
3238.060
3239.060
3240.060
3243.060
old
3321.267
3322.267
3323.267
3325.267
3326.267
Hose-proof hood carbon
new
3337.085
3238.085
3239.085
3240.085
3243.085
old
3321.835
3322.835
3323.835
3324.835
3326.835
Hose-proof hood stainless
new
3237.080
3238.080
3239.080
3240.080
3243.080
old
3321.800
3322.800
3323.800
3324.800
3326.800
new
3237.020
3238.020
3239.020
old
–
–
–
new
3321.700
3322.700
3171.100
3172.100
old
3321.700
3322.700
3171.100
3172.100
new
3237.066
3238.066
3239.066
3240.066
old
–
–
–
–
–
new
–
3238.055
3181.100
3182.100
3183.100
old
–
–
3181.100
3182.100
3183.100
Blanking cover
Standard filter mat
(IP 54)
EMC filter mat
Fine filter mat (IP 55)
Rittal — TopTherm Filter Fans
3240.020
–
3243.020
–
For additional technical information visit www.rittal-corp.com
–
–
3173.100
3173.100
3327.700
3243.066
11
The Rittal Corporation is the U.S. subsidiary of Rittal GmbH & Co. KG and manufactures the world’s leading
industrial and IT enclosures, racks and accessories, including climate control and power management systems
for industrial, data center, outdoor and hybrid applications. For more information about Rittal and its products,
please visit www.rittal-corp.com or call 1-800-477-4000.
Rittal Corporation
1 Rittal Place • Urbana Ohio 43078 • USA
Phone: 937-399-0500 • Fax: 800-477-4003 • Toll-free: 800-477-4000
Email: rittal@rittal-corp.com • Online: www.rittal-corp.com
12
For additional technical information visit www.rittal-corp.com
Rittal — TopTherm Filter Fans
07/11 • US195
Enclosures
Power Distribution
Climate Control
IT Infrastructure
Software & Services