SPEAKER TANDEM 4" CEILING PLATE AND UPWARD

SPEAKER
PRODUCT SHEET & SPECIFICATIONS
TANDEM 4"
CEILING PLATE
AND UPWARD
FIRING SPEAKER
(MODEL G952PDF)
FUNCTION
When a direct fired and indirect fired speaker is required due to
site conditions or application need, this system uses a unique
construction of both upward and downward facing speakers in
one single unit. The unit also uses higher quality construction
and sound quality than competitive systems. Installation is
simplified using plug and play Cat 5e cable with standard RJ45
connections. .
– WIRE REQUIREMENTS
+ All wire must be plenum rated and UL listed
+ Speakers use Cat 5e or equivalent, 4 twisted pair and RJ45
connectors, 568B wiring
– INSTALLATION
+ The speaker sits in the ceiling tile, supported by a tile
– SPEAKER ENCLOSURE
+ Aluminum Housing
+ Grill: Metal screen, white with perforated 4” grill
– SPEAKER COVERAGE
+ 100 sq. ft. (nominal 10’ speaker separation)
– LOUDSPEAKER
+ Power Rating – 10 watts
+ Frequency Response – 90-18 kHz
+ SPL for Masking Output: 90 dB
+ Impedance – 32 Ohms
+ Speaker Weight – 1.1 lbs
+ Overall Speaker Dimension – 4"
bridge, or is hung from the deck by a tri-pod chain
v5.0
Lencore Acoustics Corp. One Crossways Park Drive West Woodbury, NY 11797 p 516-682-9292 f 516-682-4785 info@lencore.com
Spectra i.Net®, Spectra® Classic™, n.FORM™, Spectra® Tangent® are trademarks of Lencore Acoustics Corp. All rights reserved. © Copyright 2013