Door Camera Solutions
Door Camera Solutions
1. Using Grandstream devices with 3rd party IP Door Cameras
2. Creating a Door Camera Solution with Grandstream IP Cameras and IP
Video Phones
UCM6100 series IP PBX Appliance
UCM6100 series IP PBX Appliance
The Anchor of Your Door Camera Solution & Voice/Video/Data/Mobility Communications
UCM6102
UCM6104
UCM6108
UCM6116
Asterisk is a Registered Trademark of Digium
UCM6100 series
Delivering high quality, secure and reliable voice, video,
data & mobility for SMBs
 Enterprise-grade features in an affordable,
compact & easy-to-manage PBX designed
specifically for the SMB market
 No licensing fees
 Fast and easy setup & management
 ALL hardware/software included as
well as lifetime firmware updates
 Full SIP Video support
UCM6100 series
Voice
Secure, clear, and reliable
Conferencing
Comprehensive Codec Support
Mobility
Softphone apps
Monitor your business
Connect Multiple Offices
Endless Customizable Voice
features
Data
Video
Phonebook files
Face to face video calls
CDR
Video Surveillance Integration
Codec Transcoding
SIP Video
System Backup
Video Codec Support
Call Recording
Voicemail/fax to email
UCM6100 series – Full SIP Video Support
UCM6100 Series - Video
Delivering high quality, secure and reliable video communications
Full SIP Video Support
 Any SIP video endpoint, such as
 Video Phones
 Video Conferencing Solutions
 Door/Facility Access Cameras/Modules
 IP Video Surveillance cameras
Door Camera Solutions
1. Using Grandstream devices with 3rd party IP Door Cameras
2. Creating a Door Camera Solution with Grandstream IP Cameras and IP
Video Phones
Integrate Surveillance with Your IP PBX
A Door Camera Solution…
Also use the UCM6100 series to supply all
communications for a full office building
DTMF Codes to Open the Door on the
Grandstream phone
Extension 801
(or direct phone number)
Office on Floor 1
Extension 802
Office on Floor 2
Extension 803
Office on Floor 3
Extension 804
Office on Floor 4
Extension 805
The Upper West Side Apartments
Also use the UCM6100 series to supply all
communications for a full apartment building
Melbourne, Australia
Extension 801
Extension 802
Extension 803
Visit our case studies page for more
Extension 804
Extension 805
Extension 806
Extension 807
DTMF Codes to
Open the Door on
the Grandstream
phone
A True Unified Communications Solution
Easily Integrate a Door Camera Solution With Your Business Communications
Solutions
 All Grandstream phone, cameras, and UCM6100 series –
as well as IP Door Cameras are SIP-based devices
 A true Unified Communications solution offering voice,
video, data and mobility features
 All devices can be easily setup, customized and
managed from one central location
 Add functionality to devices by combining them onto
the same network
 Even add/include analog phones and analog cameras
Communicate with Any SIP Door Camera on Any Network
Communicate With Cameras/Door Cameras on Any Network
UCM6100 Series
Internet
 IP Camera’s and Door Cameras can send alerts or be
contacted from outside networks thanks to their SIP
registration when registered to an IP PBX
 You set the phone number the cameras contact
when an alert is triggered
 With a SIP registration, any IP camera or Door
Cameras is given a phone number/IP address that
can be called to view the camera’s live feed
 View camera’s live feed from any device that has an
internet connection
Integrating Surveillance and Door Access Solutions with Your IP PBX
1. Visitor can call from door phone to
video phone in apartment or office
2. From video phone, user can unlock
door using a pre-configured DTMF key
Enable Video Codecs
UCM6100 - Video
Delivering high quality, secure and reliable video communications
Supports all major
video codecs
• H.263
• H.263+
• H.264
Make sure you enable the proper video codecs on the
UCM6100 series and the IP Door Camera. This simple
mistake is the most common configuration mistake
Door Camera Solutions
1. Using Grandstream devices with 3rd party IP Door Cameras
2. Creating a Door Camera Solution with Grandstream IP Cameras and IP
Video Phones
Door Access Solution
Turn a Grandstream IP Surveillance Camera into a Door Opener when Paired with a
Grandstream Video Phone
Step 1: Configure the Grandstream Video Phone
and the IP Camera
Step 2: Enable Alert Event
Step 3: Connect Doorbell and IP Camera
Step 4: Open Door via Incoming Video Call
1. Receive video calls from cameras
whenever alerts/alarms are triggered
2. Make video calls to cameras to see the
live feed
Video Features
The Kovalevo Center
Kastroma, Russia
Many Grandstream cameras includes a
variety of inputs/outputs to integrate
with other devices, such as a door bell,
so that when the door bell is ringed, the
camera will send the alert.
Visit our case studies page for more
Camera, with motion detection
enabled and alarm event set to “SIP
Call”
DTMF Codes to Open the Door on the
Grandstream phone
Motion Detection
•
•
•
•
Available on all Grandstream cameras
Up to 16 target areas per camera
Easily setup in 3 steps using a camera’s Web UI
Grandstream’s ONVIF-compliancy will allow
motion detection on our camera to interact with
any ONVIF VMS, NVR, etc.
Important
Settings
•
•
•
•
•
Sensitivity
Minimum duration required by motion detection trigger
Minimum interval of different motion detection event
Time Schedule Config
Alarm Action (what should the camera do when motion is
detected)
• Record Video
• Voice Alarm to SIP phone
• Upload to Alarm Center (Gsurf_Pro V2)
• Upload to Alarm HTTP (3rd party Application/VMS)
• Upload to FTP
• Email and FTP screenshots
Set Up Alarm Actions…
Choose this option to have video call made to video phone. If the phone
being called is SIP video enabled, the call will go through as a video call
Voice Alerts to SIP Phone
marketing@grandstream.com
www.grandstream.com