1000W Power Supply with Single Output
RSP-1000
series
Dimension
* W * H
L
295 * 127 * 41 (1U)
* 1.61 (1U)
11.6 *
5
mm
inch
Bauar t gepruft
Sicherheit
egel ma ge
od
o s
be wac
g
www. tuv.com
ID 2000000000
■ Features
Universal AC input / Full range
Built-in active PFC function
High efficiency up to 90%
Forced air cooling by built-in DC fan
Output voltage programmable
Active current sharing up to 4000W (3+1)
Built-in remote ON-OFF control / remote sense /
auxiliary power / DC OK signal
Protections: Short circuit / Overload / Over voltage
/ Over temperature
Optional conformal coating
5 years warranty
■ Certificates
Safety: UL/EN/IEC 60950-1
EMC: EN 55022 / 55024
■ Applications
Factory control or automation apparatus
Test and measurement instrument
Laser related machine
Burn-in facility
RF application
■ Description
RSP-1000 is a 1KW single output enclosed type AC/DC power supply with 1U low profile. This series operates
for 90~264VAC input voltage and offers the models with the DC output mostly demanded from the industry.
Each model is cooled by the built-in fan with fan speed control, working for the temperature up to , 60℃.
Moreover, RSP-1000 provides vast design flexibility by equipping various built-in functions such as the
output programming, active current sharing, remote ON-OFF control, auxiliary power, etc.
■ Model Encoding / Order Information
RSP - 1000 - 24
Output voltage (12V/15V/24V/27V/48V)
Output wattage
Series name
File Name:RSP-1000-SPEC 2016-01-20
RSP-1000
1000W Power Supply with Single Output
series
SPECIFICATION
MODEL
RSP-1000-12
RSP-1000-15
RSP-1000-24
RSP-1000-27
RSP-1000-48
DC VOLTAGE
12V
15V
24V
27V
48V
RATED CURRENT
60A
50A
40A
37A
21A
CURRENT RANGE
0 ~ 60A
0 ~ 50A
0 ~ 40A
0 ~ 37A
0 ~ 21A
RATED POWER
720W
750W
960W
999W
1008W
150mVp-p
150mVp-p
150mVp-p
150mVp-p
13.5 ~ 16.5V
20 ~ 26.4V
24 ~ 30V
43 ~ 55V
VOLTAGE TOLERANCE Note.3 ±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
300ms, 50ms at full load
88%
88%
90%
RIPPLE & NOISE (max.) Note.2 150mVp-p
OUTPUT
10 ~ 13.5V
VOLTAGE ADJ. RANGE
16ms/230VAC
HOLD UP TIME (Typ.)
VOLTAGE RANGE
INPUT
16ms/115VAC at full load
Note.5 90 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
0.95/230VAC
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
83%
12A/115VAC
25A/115VAC
LEAKAGE CURRENT
<2.0mA / 240VAC
127 ~ 370VDC
0.98/115VAC at full load
85%
6A/230VAC
40A/230VAC
105 ~ 125% rated output power
OVERLOAD
PROTECTION
FUNCTION
OVER VOLTAGE
Protection type : Constant current limiting, recovers automatically after fault condition is removed
13.8 ~ 16.8V
17 ~ 20.5V
27.6 ~ 32.4V
31 ~ 36.5V
56.6 ~ 66.2V
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
OVER TEMPERATURE
OUTPUT VOLTAGE PROGRAMMABLE(PV) Adjustment of output voltage is allowable to 40 ~ 110% of nominal output voltage. Please refer to the Function Manual.
Up to 4000W or (3+1) units. Please refer to the Function Manual.
CURRENT SHARING
5V @ 0.5A (+5%, -8%)
AUXILIARY POWER
Power OFF : open. Please refer to the Function Manual.
REMOTE ON-OFF CONTROL Power ON : short
Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual.
REMOTE SENSE
DC OK SIGNAL
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
The TTL signal out, PSU turn on = 0 ~ 1V ; PSU turn off = 3.3 ~ 5.6V. Please refer to the Function Manual.
-20 ~ +60℃ (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85℃, 10 ~ 95% RH
±0.02%/℃ (0 ~ 50℃)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:2KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Parameter
Standard
Conducted
Test Level / Note
EN55022 (CISPR22) / EN55011 (CISPR11) Class A
Radiated
EN55022 (CISPR22) / EN55011 (CISPR11) Class A
Harmonic Current
EN61000-3-2
-----
SAFETY &
Voltage Flicker
EN61000-3-3
-----
EMC
EN55024 , EN61204-3, EN61000-6-2
Parameter
Standard
Test Level / Note
ESD
EN61000-4-2
Level 3, 8KV air ; Level 2, 4KV contact
Radiated
EN61000-4-3
Level 3
EFT / Burst
EN61000-4-4
Level 3
Surge
EN61000-4-5
Level 4, 2KV / Line-Line 4KV / Line-Earth
Conducted
EN61000-4-6
Level 3
Magnetic Field
EN61000-4-8
Level 4
Voltage Dips and Interruptions
EN61000-4-11
>95% dip 0.5 periods, 30% dip 25 peniods,
>95% interruptions 250 periods
EMC EMISSION
(Note 4)
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
313.1K hrs min. Telcordia SR-332 (Bellcore) ; 116.75K hrs min.
295*127*41mm (L*W*H)
1.95Kg; 6pcs/12.7Kg/1.15CUFT
MIL-HDBK-217F (25℃)7F (25℃)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:RSP-1000-SPEC 2016-01-20
RSP-1000
1000W Power Supply with Single Output
series
Block Diagram
PFC fosc : 110KHz
PWM fosc : 90KHz
+S
ACTIVE
INRUSH
CURRENT
LIMITING
EMI
FILTER
I/P
RECTIFIERS
&
PFC
RECTIFIERS
&
FILTER
POWER
SWITCHING
-S
CURRENT
SHARE
CURRENT
SHARE
O.L.P.
PFC
CONTROL
+V
-V
DETECTION
CIRCUIT
PWM
CONTROL
DC OK
V_TRIM
O.V.P.
RECTIFIERS
CONTROL
ON/OFF
FAN
AUX
POWER
REMOTE ON-OFF
AUX POWER(5V/0.5A)
RECTIFIERS
&
FILTER
AUX GND
Static Characteristics
100
90
LOAD (%)
70
MODEL
12V
15V
24V
27V
48V
100~264VAC
720W
60A
750W
50A
960W
40A
999W
37A
1008W
21A
90VAC
648W
54A
675W
45A
864W
36A
INPUT
80
60
899.1W 907.2W
33.3A
18.9A
50
40
90
95
100
115
264
INPUT VOLTAGE (VAC) 60Hz
Efficiency vs Load (48V Model)
Derating Curve
95
90
100
85
EFFICIENCY (%)
80
LOAD (%)
60
40
80
75
70
65
20
60
-20
0
10
20
30
40
50
AMBIENT TEMPERATURE (℃)
60
70 (HORIZONTAL)
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
LOAD
※ The curve above is measured at 230VAC.
File Name:RSP-1000-SPEC 2016-01-20
RSP-1000
1000W Power Supply with Single Output
series
Function Manual
1.Remote Sense
※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V
Sense lines should be twisted in pairs to minimize noise pick-up.
1
2
PIN1 +S
11
12
+V
LOAD
PIN10 Vca
PIN2 -S
+V
-V
PIN8 Vco
TB1
CN50
-V
PIN6 REMOTE ON-OFF
◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal.
◎ This configuration is based on the assumption the Output Voltage Programming is not activated and power supply is ON.
Fig 1.1
2.Remote ON-OFF Control
※ The power supply can be turned ON-OFF indivicluaaly or along with other units by using the “Remote ON-OFF” function.
Between Remote ON-OFF (pin6) and -S(pin2)
Power Supply Status
Switch Short
ON
Switch Open
OFF
1
2
11
12
PIN10 Vca
PIN8 Vco
PIN2 -S
+V
LOAD
+
Switch
PIN6 REMOTE ON-OFF
TB1
CN50
-V
Fig 2.1
-
◎ The power supply is shipped, by factory default, with Remote ON-OFF(pin6) and -S(pin2) shorted by connector.
◎ When multiple power supplies need to turn ON/OFF simultaneously by Remote ON-OFF control, -S & -V, as well as +S & +V, on each power supply
should be connected.
3.DC_OK signal
※ "DC_OK" is an open collector signal. It indicates the output status of the power supply. It can operate in two ways : One is sinking current from external
TTL signal ; the other is sending out a TTL voltage signal.
◎ Sinking current from external TTL signal: The maximum sink current is 10mA and the maximum external voltage is 5.6V.
◎ Sending out TTL voltage signal :
Between DC- OK(pin5) and GND(pin11&12)
Output Status
0 ~ 1V
ON
3.3 ~ 5.6V
OFF
PIN5 DC_OK
1
2
+V
-V
PIN12 GND
11
12
TB1
CN50
PIN2 -S
PIN6 REMOTE ON-OFF
PIN10 Vca
PIN8 Vco
Fig 3.1
File Name:RSP-1000-SPEC 2016-01-20
RSP-1000
1000W Power Supply with Single Output
series
4. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim)
※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 40~110% of the nominal voltage by applying
either an EXTERNAL VOLTAGE or an EXTERNAL RESISTANCE.
(1)Applying EXTERNAL VOLTAGE between " Vci " (pin9) and " -S " (pin2) as shown in Fig4.1
CN50
1
1
2
AUXG DC_OK
CS
Vci
GND
-S
AUX ON/OFF
Vco
Vca
GND
2
PIN1 +S
11
12
11
+S
12
External Voltage
+V
LOAD
-V
PIN2 -S
+V
PIN9 Vci
TB1
CN50
-V
EXTERNAL VOLTAGE (DC)
PIN6 REMOTE ON-OFF
◎+S & +V and -S & -V also need to be connected on CN50
Fig 4.1
(2)Applying EXTERANL RESISTANCE as shown in Fig4.2 & Fig 4.3
(A) Output voltage goes down
CN50
1
+S
PIN3 AUXG
1
2
11
12
PIN1 +S
CN50
PIN2 -S
PIN4 AUX
PIN9 Vci
CS
Vci
GND
REMOTE
ON-OFF
Vco
Vca
GND
AUX
-S
11
AUXG DC_OK
12
2
R1
+V
-V
TB1
PIN10 Vca
+V
LOAD
-V
R1
PIN6 REMOTE ON-OFF
◎+S & +V and -S & -V also need to be connected on CN50.
Fig 4.2
(B)Output voltage goes up
CN50
1
+S
-S
PIN3 AUXG
1
2
+V
-V
11
12
PIN1 +S
CS
Vci
GND
REMOTE
ON-OFF
Vco
Vca
GND
AUX
12
2
PIN9 Vci
R2
PIN10 Vca
PIN2 -S
PIN4 AUX
TB1
CN50
11
AUXG DC_OK
+V
LOAD
-V
R2
PIN6 REMOTE ON-OFF
◎+S & +V and -S & -V also need to be connected on CN50.
Fig 4.3
Vout
OVP 120%(Typ.)
Vout
OUTPUT VOLTAGE (%)
OUTPUT VOLTAGE (%)
120
100
80
Non-Linear
60
40
20
1
2
3
4
5
6
EXTERNAL VOLTAGE (VDC)
Fig 4.1.1
Vci(Referenced to -S)
OVP 120%(Typ.)
100
OUTPUT VOLTAGE (%)
Vout
90
80
Non-Linear
70
60
50
40
390 560 820 1K2 2K2 4K7 open
EXTERNAL RESISTANCE (Ω)
Fig 4.2.1
110
Non-Linear
105
100
R1, 1/8W(Typ.)
open
18K
7K5
R2, 1/8W(Typ.)
EXTERNAL RESISTANCE (Ω)
Fig 4.3.1
※ Caution: By factory default, the Output Voltage Programming is not activated, and Vco (pin8) and Vca(pin10) are shorted by connector. Whenever this
function is not needed to activate, as assumed in other sections’ diagrams, please keep Vco(pin8) and Vca(pin10) shorted ; other wise, the
power supply will have no output.
File Name:RSP-1000-SPEC 2016-01-20
RSP-1000
1000W Power Supply with Single Output
series
5.Current Sharing with Remote Sense
RSP-1000 has the built-in active current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below :
※The power supplies should be paralleled using short and large diameter wiring and then connected to the load.
※ Difference of output voltages among parallel units should be less than 0.2V.
※ The total output current must not exceed the value determined by the following equation:
Maximum output current at parallel operation=(Rated current per unit)×(Number of unit)×0.9
※ When the total output current is less than 5% of the total rated current, or say (5% of Rated current per unit)×(Number of unit)
the current shared among units may not be fully balanced.
PSU
+V
-V
PSU
CN50
1
2
+V
TB1
-V
11
12
PSU
CN50
1
2
+V
TB1
-V
11
12
PSU
CN50
1
2
+V
TB1
-V
CN50
11
12
1
2
TB1
11
12
+S(pin1)
-S(pin2)
CS(pin7)
+V
-V
Sense lines should
be twisted in pairs
LOAD
Fig 5.1
CN50
1
+S
-S
2
AUXG DC_OK
11
CS
Vci
GND
AUX ON/OFF Vco
Vca
GND
12
CN50
1
+S
-S
AUXG DC_OK
11
CS
Vci
GND
AUX ON/OFF Vco
Vca
GND
2
12
CN50
1
+S
-S
2
AUXG DC_OK
11
CS
Vci
GND
AUX ON/OFF Vco
Vca
GND
12
CN50
1
+S
-S
2
AUXG DC_OK
11
CS
Vci
GND
AUX ON/OFF Vco
Vca
GND
12
◎ +S,-S and CS are connected mutually in parallel.
File Name:RSP-1000-SPEC 2016-01-20
RSP-1000
1000W Power Supply with Single Output
Mechanical Specification
Case No. 952B
277.7
Unit:mm
20.5
7.8
6
series
25.4
1
3-M4 L=6
1
1
295
21
34.5
18.5
41
59
+V
2
127
21
CN50
Air flow
direction
90
-V
SVR51
12 11
10
7
3
2
1
TB1
2
3-M4 L=4
2
1
1
20.5
25.4
3-M4 L=6
7.8
1
6
277.7
※ Mounting Instruction
Chassis of RSP-1000
Mounting Surface
Hole No. Recommended Screw Size
1
M4
2
M4
MAX. Penetration Depth L
6mm
4mm
Recommended mounting torque
7~11Kgf-cm
7~11Kgf-cm
Mounting Screw
※Control Pin No. Assignment (CN50) : HRS DF11-12DP-2DS or equivalent
1
11
2
Mating Housing
HRS DF11-12DS or equivalent
Terminal
HRS DF11-**SC or equivalent
L
12
Pin No. Function Description
1
+S
Positive sensing for remote sense.
-S
2
Negative sensing for remote sense.
Auxiliary voltage output ground.
G-AUX The signal return is isolated from the output terminals (+V & -V).
3
4
Auxiliary voltage output, 4.6~5.25V, referenced to pin 3(G-AUX).
5V-AUX The maximum load current is 0.5A. This output has the built-in oring diodes and is not controlled by the "remote ON/OFF control".
5
Open collector signal, referenced to pin11,12(GND).
DC_OK Low when PSU turns on. The maximum sink current is 10mA and the maximum external voltage is 5.6V.
6
Remote
Turns the output on and off by electrical or dry contact between pin 6 (Remote ON-OFF) and pin 2 (-S). Short: Power ON, Open: Power OFF.
ON-OFF
7
CS
8
9
Vco
Vci
10
11,12
Vca
GND
Current sharing signal. When units are connected in parallel, the CS pins of the units should be connected to allow current balance
between units.
Short connecting between Vco (pin8) and Vca (pin10) if output voltage programming function is not activated.
Connect to external DC voltage source for output voltage programming, referenced to pin 2 (-S).
Connect to external resistor (1/8W) for output voltage programming.
These pins connect to the negative terminal (-V). Return for DC_OK Signal output.
File Name:RSP-1000-SPEC 2016-01-20
1000W Power Supply with Single Output
RSP-1000
series
※AC Input Terminal Pin No. Assignment
Pin No.
1
2
3
Assignment
AC/N
AC/L
FG
Diagram
Maximum mounting torque
18Kgf-cm
※DC Output Terminal Pin No. Assignment
Assignment
+V, -V
Diagram
Maximum mounting torque
10Kgf-cm
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:RSP-1000-SPEC 2016-01-20