TM 11-6625-258

*TM 11-6625-258-40P
DEPARTMENT
OF
THE
ARMY
TECHNICAL
MANUAL
GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS)
SIGNAL GENERATORS SG-299/U, SG-299A/U,
SG-299B/U, AND SG-299C/U
FSN 6625-624-3516
Headquarters, Department of the Army, Washington, D.C.
31 August 1973
Paragraph
Section I.
II.
III.
IV.
INTRODUCTION
Scope
General
Explanation of columns
Special information
Location of repair parts
Abbreviations (Not applicable)
Reporting of equipment publication improvements
REPAIR PARTS LIST
SPECIAL TOOLS, TEST AND SUPPORT EQUIPMENT (Not applicable)
INDEX - FEDERAL STOCK NUMBER AND REFERENCE NUMBER CROSS-REFERENCE
FIGURE AND ITEM NUMBER
1-1
1-2
1-3
1-4
1-5
1-6
1-7
Page
2
2
2
4
4
4
4
6
TO
21
*This manual supersedes TM 11-6625-258-45P, 27 November 1964.
1
SECTION I
INTRODUCTION
1-1. Scope
Code
This manual lists repair parts and special tools required for the performance of general support and
depot maintenance of the SG-299/U, SG-299A/U,
SG-299B/U, and SG-299C/U. The PCCN for the
equipment is GTEAAS for all models.
NOTE
No parts authorized for stockage at direct
support.
1-2. General
This repair parts and special tools list is divided into
the following sections:
a. Repair Parts List-Section II. A list of repair
parts authorized for the performance of maintenance
at the general support and depot level. This repair
parts list is arranged in alphabetical order.
b. Special Tools, Test and Support EquipmentSection III. Not applicable.
c. Index-Federal Stock Number and Reference
Number (Cross-Reference to Figure and Item Number-Section IV. A list, in ascending numerical sequence, of all Federal stock numbers appearing in
the listings, followed by a list, in alphameric sequence, of all reference numbers appearing in the
listings. Federal stock number and reference numbers are cross-referenced to each illustration figure
and item number or reference designation appearance.
1-3. Explanation of Columns
The following provides an explanation of columns
found in the tabular list.
a. Source, Maintenance, and Recoverability Codes
(SMR).
(1) Source code. Indicates the manner of acquiring support items for maintenance, repair, or overhaul of end items. Source codes areCode
Explanation
PA - Item procured and stocked for anticipated or
known usage.
PB - Item procured and stocked for insurance purposes because essentiality dictates that a
minimum quantity be available in the supply systems.
PC - Item procured and stocked and which otherwise would be coded PA except that it is
deteriorative in nature.
PD - Support item, excluding support equipment,
procured for initial issue or outfitting and
stocked only for subsequent or additional
2
Explanation
initial issues or outfitting. Not subject
to automatic replenishment.
PE - Support equipment procured and stocked for
initial issue or outfitting to specified maintenance repair activities.
PF - Support equipment which will not be stocked
but which will be centrally procured on demand.
PG - Item procured and stocked to provide for sustained support for the life of the equipment.
It is applied to an item peculiar to the equipment which because of probable discontinuance or shutdown of production facilities would prove uneconomical to reproduce
at a later time.
KD - An item of depot overhaul/repair kit and not
purchased separately. Depot kit defined as
a kit that provides items required at the
time of overhaul or repair.
KF - An item of a maintenance kit and not purchased separately. Maintenance kit defined
as a kit that provides an item that can be replaced at organizational or direct support
or general support levels of maintenance.
KB - Item included in both a depot overhaul/repair
kit and a maintenance kit.
MO - Item to be manufactured or fabricated at organizational level.
MF - Item to be manufactured or fabricated at direct support maintenance level.
MH - Item to be manufactured or fabricated at general support maintenance level.
MD - Item to be manufactured or fabricated at depot maintenance level.
AO - Item to be assembled at organizational level.
AF - Item to be assembled at direct support maintenance level.
AH - Item to be assembled at general support maintenance level.
AD - Item to be assembled at depot maintenance
level.
XA - Item is not procured or stocked because the
requirements for the item will result in the
replacement of the next higher assembly.
XB - Item is not procured or stocked. If not available through salvage, requisition.
XC - Installation drawing, diagram instruction
sheet, field service drawing, that is identified by manufacturers’ part number.
XD - Support items can be requisitioned with justification.
NOTE
Cannibalization or salvage may be
used as a source of supply for any
items source coded above except
those coded XA and aircraft support items as restricted by AR 700-42.
(2) Maintenance code. Maintenance codes are
assigned to indicate the levels of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth
positions of the Uniform SMR Code Format as follows(a) Use (third position). The maintenance code
entered in the third position indicates the lowest
maintenance level authorized to remove, replace,
and use the support item. The maintenance code
entered in the third position indicates one of the following levels of maintenance.
Code
Code
Application/Explanation
L - Repair restricted to designated Specialized
Repair Activity.
Z - Non-Repairable. No repair authorized.
B No repair is authorized. The item may be reconditioned by adjusting, lubricating, etc.,
at the user level. No parts or special tools
are procured for the maintenance of this
item.
(3) Recoverability code. Recoverability codes are
Application/Explanation
O - Support item is removed, replaced, used at the
O-
organizational level of maintenance.
NOTE
A code “C” may be used in this position to denote crew or operator
maintenance performed within organizational maintenance.
F - Support item is removed, replaced, used at the
direct support maintenance level.
H - Support item is removed, replaced, used at
the general support maintenance.
D - Support items that are removed, replaced,
used at depot only.
(b) Repair (fourth position). The maintenance
code entered in the fourth position indicates whether
the item is to be repaired and identifies the lowest
maintenance level with the capability to perform
complete repair (i.e., all authorized maintenance
functions). When a maintenance code is not used a
dash(-) sign is entered. For multi-service equipment/
systems or when a code is entered, this position will
contain one of the following maintenance codes as
assigned by the service(s) that require the code-
Code
Application/Explanation
O - The lowest maintenance level capable of complete repair of the support item is the organizational level.
F - The lowest maintenance level capable of complete repair of the support item is direct
support.
H - The lowest maintenance level capable of complete repair of the support item is general
support.
D - The lowest maintenance level capable of complete repair of the support item is the depot
level.
F-
H-
D-
L-
A-
b. Federal Stock Number. Indicates the Federal
stock number assigned to the item and will be used
for requisitioning purposes.
c. Description. Indicates the Federal item name
and a minimum description required to identify
the item. The last line indicates the reference number followed by the applicable Federal Supply Code
for Manufacturer (FSCM) in parentheses. The FSCM
is used as an element in item identification to designate manufacturer or distributor or Government
agency, etc., and is identified in SB 708-42.
d. Unit of Measure (U/M). Indicates the standard or
basic quantity by which the listed item is used in
performing the actual maintenance function. This
measure is expressed by a two-character alphabeti3
cal abbreviation; e.g., ea, in, pr, etc., and is the basis
used to indicate quantities and allowances in subsequent columns. When the unit of measure differs
from the unit of issue, the lowest unit of issue that
will satisfy the required units of measure will be
requisitioned.
e. Quantity Incorporated in Unit. This column indicates the quantity of the item used in the equipment.
Subsequent appearances of the same item in the
same assembly are indicated by the letters "REF".
f. 30-Day DS/GS Maintenance Allowances.
NOTE
Allowances in GS column are for GS maintenance only.
(1) The repair parts indicated by asterisk entries
in separate allowance columns for GS represent
those authorized for use at that category of maintenance to be requisitioned on an “as required” basis,
until stockage is based on demand in accordance with
AR 710-2.
(2) Allowance quantities are indicated in the
special tool lists section for special tools, TMDE, and
other support equipment.
g. 1-Year Allowances Per 100 Equipments/Contingency Planning Purposes. Column intentionally
left blank.
h. Depot Maintenance Allowance Per 100 Equipments. This column indicates opposite the first appearance of each item the total quantity authorized
for depot maintenance of 100 equipments.
i. Illustration. This column is divided as follows:
(1) Figure number. Indicates the figure number
of the illustration on which the item is shown in TM
11-5134-15.
(2) Item number. Indicates the item number or
reference designation used to reference the item in
the illustration.
1-4. Special Information
a. Usable on codes are included in column 3. Uncoded items are applicable to all models. Identification of the usable on codes used in this publication
areCode
Used On
AF5
SG-299/U
AF6
SG-299A/U (Order No. 39108-PP-58)
AWW
SG-299A/U (Order No. 4502-PP-60)
AF7
SG-299B/U
AF8
SG-299C/U
b. The following publication pertain to the equipment and its components:
TM 11-5134-15
4
TM 11-6625-258-20P
erators SG-299/U, SG299A/U, SG-299B/U ,
and SG-299C/U.
Organizational Maintenance Repair Parts and
Special Tools Lists:
Signal Generator SG299/U, SG-299A/U, SG299B/U, and SG299C/U.
1-5. Location of Repair Parts
a. This manual contains one cross-reference index
(sec IV) to be used to locate a repair part when either
the Federal stock number or reference number
(Manufacturer’s part number) is known. The first
column in the index is prepared in numerical or alphanumeric sequence in ascending order. The reference numbers (manufacturer’s part numbers) are
listed immediately following the last listed Federal
stock number in the index of Federal stock numbers.
b. When the Federal stock number or reference
number is known, follow the procedures given in (1)
and (2) below.
(1) Refer to the index of Federal stock numbers
(sec IV) and locate the Federal stock number or reference number. The FSN and reference number are
cross-referenced to the applicable figure and item
number or reference designation.
(2) Refer to the repair parts list (sec II) and locate the figure number (C ol 10a) and item number or
reference designation ( C ol 10b) as noted in the FSN
index.
c. When the figure and item number or reference
designation are known, scrutinize columns 10a and
10b of the repair parts list (sec II) until the item is
located.
d. When the FSN, reference number, figure number, item number and reference designation are not
known, scrutinize column 3 of the repair parts list
(sec II), which is arranged in alphabetical order.
.
1-6. Abbreviations
Not applicable.
1-7. Reporting of Equipment Publication
Improvements
The reporting of errors, omissions, and recommendations for improving this publication by the individual
user is encouraged. Reports should be submitted
on DA Form 2028 (Recommended Changes to Publications) and forwarded direct to Commander, US
Organizational, DS, GS,
Army Electronics Command, ATTN: AMSEL-MAand Depot Maintenance
CRA, Fort Monmouth, N.J., 07703
Manual: Signal Gen(Nex printed page is 6.)
TM 11-6625-258-40P
SECTION II
6
TM 11-6625-258-40P
SECTION II
7
TM 11-6625-258-40P
SECTION II
8
TM 11-6625-258-40P
SECTION II
9
TM 11-6625-258-40P
SECTION II
10
TM 11-6625-258-40P
SECTION II
11
TM 11-6625-258-40P
SECTION II
12
13
TM11-6625-258-40P
SECTION II
TM 11-6625-258-40P
SECTION II
14
TM 11-6625-258-40P
SECTION II
15
TM 11-6625-258-40P
SECTION II
16
TM 11-6625-258-40P
SECTION II
17
TM 11-6625-258-40P
SECTION II
18
TM 11-6625-258-40P
SECTION II
19
TM 11-6625-258-40P
SECTION II
20
SECTION
TM11-6625-258-40P
IV
INDEX - FEDERAL STOCK NUMBER AND REFERENCE NUMBER
CROSS-REFERENCE TO FIGURE AND ITEM NUMBER
c I~\JRE
ST OCIC N!JMfl ER
4130-542-2049
41/+o-356- 1639
5325-682-2080
5325-682-2080
5325–682-2080
5325-682-2080
5325–682–2080
5325-682-2080
5325-682–2080
5340-619-7513
5355–579–6390
5355 -’579-6390
5355-579–6390
5355–579-63’30
5355–579-6390
5355–667–5971
5355 -667–92Q5
5355–667-9295
5Q05-1Q2–03Y9
5905-192-0390
5905–192-0390
5’9)5-192–9185
5905-195–6449
59c15-195-t,806
5905–221-5860
5905-247-9329
5905-247-9329
5905-249-3661
5905–252-4018
5905-252–4!318
5935–252–4018
5905:252–4018
5905 -252–4~18
5905-252-4018
59 Q5-252-4018
5905-252-4018
5905-252-4018
5?05–252-4918
5905-252–4018
5905–252–4018
5905-252–4918
5905–257-4018
5905–252–4018
5905–252-4018
5905 -254 -7C97
5905–256–0409
5905-279-1714
5905-279–1717
5995-279–1722
5905-279-1740
5905-279-2546
5905-279-2546
5905-279-2546
5995-279-3499
5905–27!7-3516
5905-279–3515
5935 -?79-3516
5935-279–3516
5905–279–3516
59’35-279-3516
5905-279-3837
5905-27+4892
5905-283-6196
5905–283-6196
5905-284-3418
5935-295-3409
5905-299-1985
5905–299-1996
59 G5-299-2002
5995–299-2003
5905–?Q9–2003
590 S-299-2105
5905-299–2005
59 C5–299-2014
5905-299–2020
5905-299–2044
5905 -2? 9-7979
ITEM
NC).
NO.
STOCK
5905-503–557?
5905-503-5572
5995–503–6716
5905-503-6716
5905-518-5056
5905-518-5056
5905-537-6463
5905–542–9197
5905-542-9197
5905-542-9198
5905-542-9198
5905-542-9199
5905-542-9228
5905-549–7785
5905-552-2612
5905-556-3041
5905-577-2950
5905-577–2950
5905-577-7516
5905-578-9405
5905-615-3535
5905-615-3535
5905–615-?.535
5905-615-3535
~LI
11.1
YP33
MP34
l.l P35
MP36
MP37
MP38
MP39
1
MP3
MP4
WP19
MP70
14p21
1
1
1
24
25
25
23
23
25.1
23
24
24
25
24.2
24.2
24.2
24.2
24.2
24.2
24.2
24.2
24.2
24.2
24.2
24.2
25.1
25.1
25.1
25.1
25
25.1
24
24.2
24
25
25.2
25.2
25.3
24.3
25.2
25.2
25.2
25.2
25.3
25.3
23
25.3
25.2
25.2
23.1
z>
24
24
2’!)
23
24
25.3
25.3
24
23
23
24
NIJMBER
E5
v P2
p??
Q 54
R70
R36
Q2
P16
R14
~91
RQ2
Q41
Q44
R46
R48
R49
R50
~52
R73
476
R7-1
R78
’280
P83
Q4
R5
R35
R37
R45
RIQ
R96
941
R89
R97
Q(>8
R74
P.59
Q60
R66
R69
Q72
Q75
Q53
R58
P7
R27
R13
U31
R51
Q56
F?86
R 94
R85
R6
R90
R26
R33
R 93
R38
P. 1
R88
5935-615-3535
5905-615-3535
5905-615-8032
5905-615–8032
5905-615-8332
5905-615–8012
5905-615-8333
5905-615–8034
5905-615-.8057
5905-615–8087
5905-644-6693
5’905-646-5771
5905-646-5771
5905 -655 -1”701
5995–655–17!31
5905-655-1702
59’35-655-1704
590~-655–4054
5905–655-4065
59!35-660-~2S15
5905-660-5295
5905–660-5295
5905-660–5295
5905 -693 -21?0
5905-683-2120
5905 -683 -212’3
5905-683–2120
5905–683–212L7
5905–683–2122
5905-752-3737
5905 -838 -071Q
5905-838-3719
5905-838-0719
5905-838-3319
5905-838-332(7
5905-988-0149
5912-012-8582
5910-190-9522
5910-190-9522
5912–190-9522
5910 -1?0–9522
5ql,3-240-778rT
5910-289-7401
5910-280-7401
5913-280-7401
5~10-280-7401
5910-280-7401
5912-294-4218
5910–284–4018
5912-284–4018
5910-284-4018
5919-284-4049
5913-284-4049
21
FIGIJRF
NO.
ITFM
NV.
25
25
25
25
25.2
25.2
23
25.3
25.3
25
25
25.3
25.2
25
23
23
23
23
25.3
25.3
25.2
25.3
25.3
25.3
25.3
25.3
25
25
25
R62
R67
R55
R71
F!12
R3!I
R33
R1O
028
R47
Q 79
Ri?2
Q 84
R64
t?2fl
R51
Q18
R39
R8
x27
R24
Q18
v~l
R23
R25
Q39
Q 42
R43
Q81
R82
R87
R34
R17
R2’3
::.2
23
25.2
23
24.2
23
25.2
25.2
25.2
25.2
23
23
25.2
25.2
25.3
25,3
25.3
25.2
25.3
25.3
25.3
25.3
25.3
23
25
25
23
25.3
25.2
25.3
R3
R49
Rll
R29
R15
Q9
R7
R 84
R2+
R21
Q23
R25
Q24
Q18
R21
R23
R25
R39
R8
057
R61
R63
R51
Q84
R26
23.1
23.1
24.1
24.1
25.1
24.3
24.3
25.2
25.3
25.3
24.2
24.2
25.2
25.2
23.1
23.1
C5
C16
C18
C30
r9
C21
C25
C7
Clo
Cll
C23
(.24
C4
C15
C6
cl?
QQ5
SECTION
TM11-6625-258-40P
I V
FIGu QE
NO.
ITEM
NO.
591 O-543 -C71O
5910-583-4486
5910-615-0099
5910-615-0099
5910-643-9018
5910-643-9018
5910-665-0309
5910-665-0309
5910-665-0309
59 L0–666-6569
5910-666-6569
5910-666-6569
5910-666-6569
5910-666-6569
5910-834-7078
41.2
23
25.3
25.3
25.3
25.3
25:3
39
25.3
25.2
25.2
25.3
25.3
25.3
25.1
5910-834-7078
5910–846-0194
5910-890-9666
5910-927-0785
5920-280-3178
5920-285-0755
5930-050-2704
5930-583-8476
5930-583-8477
5930-649-5943
5930-649-5944
5930 -729 -’9883
593(3-823-0302
5935-063-5789
5935-063-5789
5935-160-1365
5935-160-1365
5935-160-1365
5935-160-1365
5935-160-1365
5935-160-1365
5935-160-1365
5935-160-1365
5935-160-1365
5935-260-0516
5935-260-0516
5935-260-0516
5935-260-0516
5935-545-7659
5935-545-7659
5935-583-5800
5935-583-5800
5935-583-5800
5935-636-7145
5935-665-5718
5935-665-5718
5940 -L86-8960
25.1
25.3
25.2
41.1
24.1
24.1
24.3
25.1
25.2
25.2
25.2
25.1
25.2
24
24
24.2
24. Z
24.2
24.2
24.2
24.2
24.2
24.3
25.1
24
24
25.2
25.2
24
24
25.1
25.2
25.2
41.2
24.2
24.2
C31
c 31
C19
C28
c1
C13
C2
C12
C32
C27
C29
C20
C22
C26
C3
C14
C8
C34
C31
F1
XF1
53
51
82
S1
52
51
52
XV12
XV13
STOCK
NuMBER
REFERENCE
No .
0S7383
9S7384
Fil1938-38
CE31F250R
CE32F400R
CE41F800R
CK63Y103Z
CK63Y103Z
CK63Y103Z
CK63Y103Z
CK63Y1!33Z
CM158150KN3
LM158150KN3
CM158150KN3
CM15B150KN3
CM15B159KN3
CM15C390J
CM15C390J
CM150201JN3
CY15D201JN3
CM150201JN3
CM150201JN3
STOCK
5940-223-1434
5942-223–1434
5940-549-8121
5940-549-9037
5940-838-6605
5940-838-6606
5950-067-7753
5950-266–0634
5950-577-9188
5953-583–4489
5950-583–449?
5950-655-0556
5950-821-0139
5950-821–0139
5950-823-3148
5950-823–3151
5950-823-3151
5959-841-6510
5960-188-3602
5960-262-0185
5960–262–0286
596!3-262-3781
5960-543-1001
5963–557–6780
5963-615-024?
5960-615-0243
5960-615-0243
5963-615-0243
5960-615–0243
5960–615-0243
5960-615–0243
596!) -615-0243
596!3-642-8341
5960-710-7930
5960-860–2520
5961-581–8066
5970-557–2350
5970-557–2350
5970-557-2350
5970–557–2350
5975-273-0788
5975–685-9518
6105–623–0020
6105-774–9400
6105-838-3660
6145 -660 -93?1
Xvb
xv
XVb
XV9
Xvlo
Xvll
XV2
Xvl
XV14
XV15
XV4
XV5
XV14
XV15
XVI
XV2
x V3
PI
J1
J2
MFR
COOE
04846
04846
17870
81349
81349
81349
81349
81349
81349
81349
81349
80063
80063
80063
aO063
80063
81349
81349
80063
8!)063
80063
80f363
FIG.
Vo .
25,2
25.2
25.3
25.2
23.1
41.2
24.3
24.3
25.2
25.3
25.3
25.2
25.2
25.3
25.3
25.3
23.1
23.1
23.1
23.1
24.1
24.1
WIMBER
6145–661-0191
6145–752-1307
6213-643-4871 ,
6242-155–8706
6625-584-4690
[TFM
hlo.
REFERENCE
Nfl.
CM2OD1O2G
CM200L02G
CM2OD1O2G
CM2OD1O2G
CM35E103JN3
CA35EL03JN3
CP05ALEE474K
CPO5A1KE1O4K
CPO5A1KE1O4K
CPO5A1KE1O+K
CP09A1KE224K1
CP09A1KE224K1
CO02MGF2-18SJ0735
CO02MGF2–18SJ0735
CO03LGF3–18-0260
OCH
OC1-1-03M
OC1-216K
OC1-216K
OC1-230
OC1-230
OC1-3-05M
52
51
L7
C34
C31
C31
C2L
C25
C7
Clo
Cll
C27
C29
I-2 9
C22
C26
C6
C17
C5
C16
C18
C30
22
FIGURE
NO.
ITEM
No.
J4
J3
J4
J3
F2
F1
T1
L3
L7
T1
L7
T1
L1
L4
L2
L5
[.6
L7
24
24.1
23.1
25.3
23.1
23
23.1
23.1
23
23
23
25
25
25.3
V14
V4
V15
VI
V13
v?
\12
W
V6
V7
V8
V9
Vlo
Vll
V12
VP2
10.1
10.1
10.1
10:1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
CP1
El
23
F2
E?
F4
23
11.1
11.1
B1
R1
B1
24.2
24.3
W2
W1
Xnsl
0s1
MFR
:OOE
FIG.
NO.
ITFw
NO.
80063
80063
80063
80063
81349
24.2
24.2
25.2
25.2
25.1
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
19701
19701
19701
19701
19701
19701
25.1
25.3
25.3
C23
C24
r4
C15
C3
C14
C8
C2
39
25.3
25.3
25.3
C13
C32
cl
c12
25.2
WI
W1
Q27
R15
R12
Pll
25
25
25.3
R55
R71
Q1O
25.2
25. ?
SECTION
TM11-6625-258-40P
I V
REFERENCE
N@.
DC1-3-05M
OC1-30-5K
OC1-370K
OC1-370K
OC1-479K
OC1-479K
OC1-684K
OC1-684K
OCI-90-5K
OC1-95-5K
DC1-95-5K
~26781
$10086
JJUU1021P31O8
JJU1221P3048
JJ83114
JS0503
JS0600
JU7501P3048
JU7501SL32056
J83115
KNS12
KNS12
LH62PP2
F4S15571-2
MS35059-9
WS91528-2F20
qS91528-2F20
!4S91528-2F2D
4S91528-2F2D
MS91528-2F2Ll
NFT396
RC2OGF1O2J
RC2CIGF105J
Rc~9GFl135J
QC2OGF1O5J
RC20GF221K
PC20GF224K
RC20GF273J
RC20GF334K
RC20GF470J
RC20GF470J
RC20GF470J
RC20GF470J
QC20GF470J
RC20GF470J
RC20GF470J
RC20GF470J
RC20GF470.I
RC20GF+70J
RC20GF470J
RC20GF470J
RC20GF470J
RC20GF470J
RC20GF470J
RC213GF470J
!7C20GF683K
QC20GF827K
RC2OGF91OJ
RC20GF910J
RC20GF910J
RC2OGF91OJ
‘? C2OGF91OJ
Qcz OGF910J
Q. C32GFI02K
DC32GF104J
RC32GF104J
QC32GF105K
RC32GF124K
RC32GF154K
RC32GF180K
RC32GF222K
QC32GF224K
QC32GP271K
RC32GF272K
RC32GF273J
RC32GF334K
RC32GF361J
Q, C32GF361.I
RC32GF361J
MF R
COOE
FIG.
NO.
ITEM
NO.
19701
19701
19701
19701
19701
19701
19701
19701
19701
19701
19701
56289
82864
01121
01121
01121
17870
01316
01121
01121
01121
24655
24655
80058
80058
81349
81349
81349
81349
81349
81349
14655
81349
81349
81349
81349
81349
81349
81349
81349
01349
81349
81349
8!349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
8134Q
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
25.3
25.3
25.2
25.2
25
25
25.2
25.2
25.3
25
25
41
R2fl
R22
R12
R30
R47
R79
Rll
R29
R26
R62
R67
C31
FL 1
R84
R84
R84
’31
B1
R51
R51
R51
E5
M P2
XI)S1
nsl
53
MP3
M P4
MP19
MP20
MP21
25.2
25.2
25.2
11.1
11.1
23.1
23
25.3
1
1
24.2
24.3
24.3
41.2
25.1
24
25
25
25.1
25
24.3
23
24.2
24.2
24.2
24.2
2.4.2
24.2
24.2
24.2
24.2
24.2
24.2
24.2
25.1
25.1
25.1
25.1
25
25
25.2
25.2
25.2
25.2
25.3
25.3
24
23
24
24
24
24.2
25
23
24
25
23
23
24
25.2
25.2
25.3
RC32GF473K
RC32GF823K
RC32GF823K
RC32GF823K
RC42GF392K
PC42GF470K
RC42GF470K
RC42GF472K
RF CSO-68
Rcc5(3_,5!3
RF C54-7
RF CS4-7
RPC56-8
RG59BU
RN70B2701F
RN70B4220F
RN70E14220F
RN75B15!31F
RN75B6192F
RN8082001F
RN8 0B200 lF
RN BOB2091F
RN80B2001F
RV2NAXS0302A
RV2NAXSD503A
Rv2NAXSD503A
Rv2N&x S0503A
RV2NAXS950?4
PV2NAXSD503A
RV2NAXSi3503A
PV4LAXSA105B
Rv4NAXS9251A
RV4NAXSD503A
Rv4t4&xsD503A
RV4NAXS0503A
RV4NAXS0503A
RV4NAYSO1O4A
RV5LAXSR5122A
RV5LAXSB 503A
RV5LAXS9533A
RV5LAXSB 503A
RV5LAXSB503A
RV5LAXSB50?A
RV5LAXSB503A
Rw22v801
Rw29v202
RW58G471
RW58G471
RW58G471
Q5f3-o-5
SC A369933
SC B136552
Sr8136552
SN436’993 1
SMi3146149
5MB369907
5Y036990 1-4
<R6P1
SR7PS1EI-2
SU5F205M
SU5E205M
TF3PX03ZZ
TS101DO1
TS101PO1
TSL32P01
TS102PO1
TS102PO1
TS!02P01
TSI03P31
~slo3Pol
TsITj3P31
TS103PO1
TSI03P01
TSI03P01
TS103PO1
TS103POl
TS103PO1
uGlo~41J
UG1094U
U0M45EM8784-137723
R16
R32
P54
R70
R19
R56
Q60
R14
P44
R 46
R48
Q49
R50
R52
R73
Q76
!277
Q78
R80
R83
?4
Q5
R35
R37
R41
R45
R56
QbC!
R72
?75
R53
R5/3
R89
Q6
P90
R96
R85
R41
R97
R1
R96
R64
R7
R3t3
R94
R68
R74
R59
23
MFR
COOE
FIG.
P\@.
81349
81349
81349
81349
B1349
81349
81349
01349
05267
05267
95267
05267
05267
81349
!31?49
81349
81349
81349
81349
81349
81349
81349
81349
81749
81349
81349
81349
81349
81349
01349
01349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
8L349
81349
81349
81349
81349
e1349
42498
80063
75915
75915
80063
83063
80Q63
69399
28520
28520
72928
72928
81349
81349
81349
81349
81349
81349
81349
81349
81349
91349
81349
81349
81349
8134Q
81349
81349
80058
80058
11237
24
23
25.3
25.3
23
24
24
23
25
25
23
27
23
23
23
25.2
25.3
23
25
25
25
25
23
25.2
25.3
25.3
25.3
25.3
25.3
23
25.2
25.2
25.3
25.3
25.3
24.2
25.3
25.2
25.3
25.3
25.3
25.3
25.3
24.2
24
25
25
25
25.3
25.2
ITEM
NO.
R93
Q33
R26
R33
@36
R91
R 92
R2
L5
L6
L1
L4
L2
W2
R7
R3
R40
!227
R26
R42
R43
R81
R82
R8
R24
R18
R21
R23
R25
R39
R20
R17
R24
R21
Q23
R25
R95
R8
R24
R18
R21
R23
R25
R39
R87
R88
R57
Rbl
Q63
L3
52
XF 1
S1
23.1
11.1
TI
25.3
25.3
23.1
24
24
24
24
25.2
25.3
24.2
24.2
24.2
24.2
24.2
24.2
24.2
24.3
25.1
24.2
24.2
23
C19
C28
TI
XV12
XV13
XV14
XV15
x V4
XV5
XV6
xv?
XV8
x V9
Xvlo
Xvll
XV2
Xvl
J1
J2
R18
SECTION
TM11-6625-258-40P
I V
REFERENCE
NO.
UP M45EM8784-1377Z3
UPIUM
1N69A
1042C
1042C
1042C
1042C
1042C
L042C
L042C
11500
116 PHS9T0
116 PHSPT0
13750-3
19912-353
19912-354
20800-206
33087 E1-3-8
33087 F1-5-8
3320-31
37202
37202
37223BLK
37223RE0
5U4GB
5X540
5651k/A
MFR
CCIOE
FIG.
NO.
I TEM
NO.
11237
BO05B
81349
80058
80058
80058
BO058
80058
80058
80058
74330
04156
04156
73793
74330
74330
28569
76487
76487
74330
76487
76487
76487
76487
81349
04726
813+9
23
41.2
R39
PI
CR1
+P33
M P34
MP35
MP36
MP37
MP38
MP39
1
24
24
23
25.2
25.2
23
10.1
10.1
23.1
3
3
10.1
23
10.1
REFERENCE
NO .
5726 -6AL5W
6BH6
6BQ7A
6CL6
6CL6
6CL6
6CL6
6CL6
6CL6
6CL6
6CL6
6C4kiA
6080WA
7385
7490-0118
7490-0118
7490-0118
824895-02
938A
938A
938C
938D
938Z
938Z
945
9750
9954778
XV14
XV15
31
S1
S2
T1
MP1
MP2
L7
E3
E4
E2
F1
V12
R34
V15
24
MFR
CODE
FIG.
NO.
ITEM
NO.
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
81349
04846
94151
94151
94151
09708
24655
24655
24655
24655
24655
24655
76385
24655
21450
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
23.1
25.1
25.2
25.2
25.1
V4
V14
V1
V2
V3
V6
V7
V8
V9
Vlo
Vll
V5
V13
L7
24
Xvl
XV2
XV3
C9
J4
J3
J4
24.1
E2
1
23
24.1
Q9
F1
By Order of the Secretary of the Army:
CREIGHTON W. ABRAMS
General, United States Army
Chief of Staff
Official:
VERNE L. BOWERS
Major General, United States Army
The Adjutant General
Distribution:
Active Army:
USASA (2)
CNGB(l)
ACSC-E (2)
USAARENBD (2)
USAMB (10)
AMC (l)
FORSCOM (5)
ARADCOM (2)
ARADCOM Rgn (2)
OS Maj Comd (4)
LOGCOMD (5)
MICOM (2)
TECOM (2)
USASTRATCOM (4)
HISA (ECOM) (21)
MDW(l)
Armies (2)
Corps (2)
Svc Colleges (2)
USASESS (5)
USAADS (2)
USAFAS (2)
USAARMS (2)
USAIS (2)
USAES (2)
USAINTS (3)
USACDCEC (5)
Instl (2) except
Fort Gordon (10)
Fort Huachuca (10)
Fort Carson (10)
WSMR (2)
Army Dep (2)
LEAD (7)
LBAD (14)
SAAD (30)
TOAD (14)
ATAD (10)
USA Dep (2)
Sig Sec USA Dep (2)
Sig Dep (5)
Sig FLDMS (1)
USAERDAA (1)
USAERDAW (1)
MAAG (1)
USARMIS (1)
Ft Richardson (ECOM Ofc) (2)
WRAMC (1)
Units org under fol TOE:
(1 COPY each)
7
11016
11-97
11-98
11-117
11-500(AA-AC)
29-1
29-11
29-15
29-16
29-21
29-25
29-35
29-36
NG: State AG(3) Units-Same as Active Army.
USAR: None
For explanation of abbreviations used, see AR 310-50.