TE-W unpriced

Series
TE-W
Wall Mount Temperature Sensor
Discrete Wall Mount Housing
35/64
[13.89]
The Series TE-W Wall Mount Temperature Sensor provides a low cost temperature
input for any building management system. With large vents in the housing for proper air
flow, the sensor accurately measures the ambient temperature in hotel rooms or office
buildings. Multiple mounting holes on the wall plate allow for mounting to numerous
surfaces.
Model
TE-WND-A
TE-WND-B
TE-WND-C
TE-WND-D
TE-WND-E
TE-WND-F
Sensor Type
10K Ω Type III Thermistor
10K Ω Type II Thermistor
3K Ω Thermistor
Pt100 Ω RTD
Pt1000 Ω RTD
20K Ω Thermistor
TEMPERATURE
Series
TE-WSS
59/64
[23.42]
1-13/32
[35.72]
4-31/64
[113.9]
3-13/32
[86.52]
1-3/16 1-3/16
[30.16] [30.16]
3X 3/8
[9.53]
4X 3/16
[4.76]
1-53/64
[46.43]
1-13/32
[50.01]
SPECIFICATIONS
Accuracy:
Thermistor temp sensor: ±0.2°C @ 25°C (±0.36°F @ 77°F);
RTD temp sensor: DIN class B; ±0.3°C @ 0°C (±54°F @ 32°F).
Operating Temperature: -40 to 140°F (-40 to 60°C).
Sensor Curves: See Resistance vs. Temperature Table (page 299).
Housing Material: ABS plastic.
Weight: 0.3 lb (136 g).
Stainless Steel Wall Plate
Temperature Sensor
Screw Terminal Connection, Suitable for Wash Down Applications
2-3/4
[69.86]
1-3/8
[34.93]
3/16
[4.70]
4-31/64
[113.89]
Temperature Sensors
3-9/32
[83.31]
7 IN
[177.8 MM]
LEAD
(2) Ø.215 X THRU
DIMPLE FOR 6-32 OVAL
COUNTERSUNK SCREW
The Series TE-WSS Stainless Steel Wall Plate Temperature Sensor measures
the ambient air temperature in classrooms and industrial environments. By having a flush
mount design, the temperature sensor can withstand a wash down. A foam gasket prevents
ambient temperature from behind the wall plate from skewing the temperature
measurements. The discrete stainless steel wall plate sensor also hides the sensor to
prevent tampering. Each sensor comes with a terminal block and two mounting screws for
quick installation.
Model
TE-WSS-A
TE-WSS-B
TE-WSS-C
TE-WSS-D
TE-WSS-E
TE-WSS-F
300
Sensor Type
10K Ω Type III Thermistor
10K Ω Type II Thermistor
3K Ω Thermistor
PT100 Ω RTD
PT1000 Ω RTD
20K Ω Thermistor
DWYER INSTRUMENTS, INC. | www.dwyer-inst.com
SPECIFICATIONS
Accuracy:
Thermistor: ±0.2°C @ 25°C (±0.36°F @ 77°F);
RTD: DIN Class B ±0.3°C @ 0°C.
Temperature Limits: Operating -40 to 150°C.
Sensor Curves: See Resistance vs. Temperature Table (page 299).
Housing Material: 304 SS wall plate.
Weight: 2.3 oz (65 g).