142665 IntSensControls 7 15 15 bro

Encounter and SkyRidge
with Integrated Sensor Controls
Get the best of both worlds. Award winning
Metalux EncounterTM and SkyRidgeTM luminaires
with WaveStream TM LED technology are available
with an optional integrated sensor system,
optimized to meet energy codes for occupancy
sensing and daylight harvesting.
The luminaire-integrated sensor control system from Eaton’s Cooper Lighting business
reduces the design time and complexity of meeting energy codes for both lighting
and controls. The sensor system was designed to guarantee occupancy and daylight
harvesting coverage from within the footprint of Metalux ambient luminaires, so the
lighting design is the control design. And, the system achieves the lowest installed
cost in small spaces compared to traditional control products.
No New Wires
An in-place fixture retrofit is
all that’s needed to meet most
energy codes in commercial
spaces. The sensor system is
factory wired to the luminaire,
switching on or off based on
occupancy, and dimming the
light when enough daylight
is available.
Coverage
4m
[12 ft.]
Lighting Controls
Without Commissioning
The luminaire-integrated
sensor system offers outof-the-box operation using
thoughtful default settings.
Flexibility and Individual
Control
When the application
demands more, the sensor
system has the option to
make changes using a remote
control. The remote allows
changes from the default
settings for occupancy, target
light level, preset lighting
levels, and more.
Low Installed Cost
With a single product to
mount, and a single electrical
connection to make, a
Metalux Encounter or
SkyRidge with an integrated
sensor system saves money
on the total installed cost
when occupancy and
daylighting harvesting controls
are needed.
Top View
CL
0m
[0 ft.]
4m
[12 ft.] Major Motion
3.3m
[10 ft.]
0m
[0 ft.]
4m
[12 ft.]
Side View
0m
[0 ft.]
4m
[12 ft.]
Recommended Mounting Height 8–12 ft.
Worry-free Controls Planning
Ensure seamless coverage and
performance with a sensor system
built into every luminaire. The multitechnology sensor’s occupancy and
light sensing coverage overlaps the
area each fixture illuminates.
1
EATON
Integrated Design
The sensor system adds to the contemporary
aesthetic of both WaveStream luminaires.
The system is factory wired and ready to
meet code out of the box.
Encounter and SkyRidge with Integrated Sensor Controls
Sensor Remote Control
The optional remote can be used to change
settings and to provide local control for one
or more fixtures in the same area, allowing
users to adjust light levels, even temporarily
override automatic controls. Choose one per
project, or one per fixture.
Technical Information:
• Fully integrated in to the luminaire – no additional wiring or special
installation required
• Energy Saver setting – dim to a lower light level when
unoccupied
• Passive infrared occupancy detection
• Infrared receiver for programming and remote control
• Light sensor for closed-loop daylight harvesting with day, twilight
and night settings
• Indicator light for occupancy status and programming
confirmation
Start Up Behavior
Action
Factory Defaults
1
Turn power ON to the fixture.
Occupancy Detection
2
The light will start at 50% light level and then
raise or lower to the daylight level.
Default Occupancy Time Out
20 minutes
Occupancy Sensitivity
High
Item No.
3
4
The sensor RED LED should slow blink (ON for
2 seconds, OFF for 2 seconds) for a 1 minute
duration then blink only on occupancy.
Wait for next daylight adjustment/occupancy
action.
Encounter TM
Series
Auto-on, Active
Energy Saver Scene
100% - Daytime Occupied Scene
Fade Up Time
32% per second using “Raise”
Fade Down Time
24% per second using “Lower”
Default Daylight Harvesting Level
500 Lux
Default Unoccupied Light Level
Off
Sky
SkyRidge
yRidgeTM
Series
Serries
Ordering Information
Example:
Exampl
Exa
mple:
e:
Example:
Exa
ampl
mple:
e:
22EN LD1 34 UNV L835 CD1 SVPD1 U
22EN-LD1-34-UNV-L835-CD1-SVPD1-U
22SR-LD1-29-C-UNV-L835-CD1-SVPD1-U
22S
SR LD1 29 C UNV L835 CD1 SVPD1 U
SR-LD1-29-C-UNV-L835-CD1-SVPD1-U
Combined with the high efficacy and low
lumen-power density of the award-winning
Metalux Encounter and SkyRidge luminaires,
the integrated sensor system is a fast, easy
way to meet or exceed strict energy codes for
both controls and lighting standards. All while
providing high user comfort and exceptional
functionality. Each unique Wavestream design
is complimented by an integrated sensor
system design by adding the option code
SVPD1 to the luminaire catalog logic. See the
luminaire specification sheets for more details.
Today’s energy codes demand the use of controls. The cost to
add traditional occupancy sensors and daylight harvesting
controls can add up quickly, especially in smaller spaces
Metalux Encounter or SkyRidge luminaires with
the Integrated Sensor system are ideal for
new construction or retrofits in enclosed
rooms with one to six luminaires, where
both occupancy detection and daylight
harvesting control are required. When
compared to the cost of furnishing and
installing traditional occupancy and daylight
sensors in addition to the cost of the
luminaire, installing Metalux fixtures with
the Integrated Sensor saves money
and installation time.
Examples Uses:
• Private Offices
• Patient/Exam Rooms
• Fitness Centers
• Small Conference Rooms
• Small Classrooms
• New Construction or Rennovation
• Storage Areas
EATON
Encounter and SkyRidge with Integrated Sensor Controls
2
Our Lighting
Product Lines
Halo
Halo Commercial
Portfolio
Iris
RSA
Metalux
Corelite
Neo-Ray
Fail-Safe
MWS
Ametrix
Shaper
io
Lumark
McGraw-Edison
Invue
Lumière
Streetworks
AtLite
Sure-Lites
Our Controls
Product Lines
Greengate
iLumin
Zero 88
Fifth Light Technology
iLight (International Only)
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
Eaton is a registered trademark.
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. ADF142665
July 2015
All other trademarks are property
of their respective owners.
Product availability, specifications,
and compliances are subject to
change without notice.