Video | MIC Series 612 Thermal Camera
MIC Series 612 Thermal Camera
www.boschsecurity.com
The MIC Series 612 camera has been designed to offer
an extremely reliable, robust, and high-quality
surveillance solution for security applications that
demand the very best performance. Precision
engineered to exacting standards, the camera offers
the most ruggedized dual optical/thermal image
capture solution available on the market today.
System Overview
High-performance camera with simultaneous
thermal/optical video output
Image control and quality are integral aspects of any
PTZ camera, and the MIC Series 612 delivers.
A high-quality day/night camera core with 36x optical
zoom lens and a full 12x digital zoom, and a highperformance, un-cooled thermal imaging core sit sideby-side within the housing. Each MIC Series 612 has
two video outputs – one for the optical camera, and
one that is user-switchable between the optical
camera and the thermal imager. The optical camera
provides 550 TVL of horizontal resolution for
outstanding clarity and image detail, and incorporates
Wide Dynamic Range (WDR) that dramatically
improves the dynamic range by 128 times and results
u
User-switchable (single) or simultaneous (dual)
thermal/optical video output
u
Choice of thermal imagers: standard resolution (35
mm, with user-selectable on-screen temperature
display (spot meter)) or high resolution (50 mm)
u
Human detection range up to 1500 m (almost twice
the range of previous MIC thermal models)
u
Robust design rated to an industry-leading IP68/
NEMA 6P/IK10
u
Advanced privacy masking and Image stabilization
(optical camera only)
in clear image reproduction in extreme high-contrast
environments. Features of AutoScaling (proportional
zoom) and AutoPivot (automatically rotates and flips
the camera) ensure optimal control.
Day/night capabilities and outstanding sensitivity make
the MIC Series 612 an exceptional performer in all
lighting conditions. In low light, the optical camera
automatically switches from color to monochrome by
removing the IR filter to boost sensitivity, while
maintaining superior image quality. For operation in
the darkest conditions, the SensUp control feature
automatically reduces the shutter speed to as little as
one second. This increases sensitivity by more than 50
times. In addition to low light applications, the optical
camera is also an exceptional performer when viewing
under a sodium vapor lamp (for example, a street lamp
or tunnel lamp), which normally gives a yellowish tint
to images. The camera automatically compensates and
restores objects to their original color.
The thermal imager has user-selectable color options
including White Hot, Black Hot, and many others, and
built-in sun protection that allows the camera to selfheal if pointed directly at the sun. Standard-resolution
models also have a user-selectable on-screen
temperature display (spot meter).
2 | MIC Series 612 Thermal Camera
Examples of optical and thermal modes
Optical image / Thermal image, White Hot mode;
(middle) Black Hot / Sepia; (bottom) Globow / Rainbow
Robust design rated to an industry-leading IP68/
NEMA 6P
Subjected and certified to rigorous ingress
certification tests, MIC Series cameras are perfectly
suited for installation in even the most unforgiving
environments, eliminating the need for pressurization.
The cameras are machined from solid aluminum and
protected from corrosion by two different processes:
first, they receive a coating of Alodine 5200, a
chromate conversion coating of aluminum that is used
in the aerospace and defense industries where a
protective layer is required to improve corrosion
resistance. Second, they receive a robust, powder
paint coating. The cameras are sealed with ‘O’ rings
and can operate submerged in up to one (1) meter
(3.3 feet) of water for sustained periods of time [a
maximum duration of 24 hours]. (They are not rated to
be installed permanently under water.) (The thermal
camera will show no detail if submerged.)
Functions
Multi-protocol operation
The MIC Series 612 incorporates Bosch’s standard
controller interface supporting familiar on-screen
menus and multiple protocols, including Bosch
“Biphase (OSRD),” “Bilinx,” and Pelco “P” and “D.”
This makes it simple to integrate and use the camera
within systems that already use Bosch AutoDome
cameras and systems.
High performance PTZ operations
Brushless motor technology ensures ultra-reliable
operation with full 360° continuous rotation pan for
exceptional viewing capability. The camera supports
99 pre-positions and two styles of Guard Tours: Preset
and Record/Playback. The preset tour has capability
for up to 99 pre-positions with a configurable dwell
time between pre-positions, and can be customized as
to the order and frequency each preset is visited. The
camera also provides support for two recorded tours,
which have a combined duration of 15 minutes of
movements. These are recorded macros of an
operator’s movements, including pan, tilt, and zoom
activities, and can be played back in a continuous
manner.
Superior privacy masking and Image Stabilization
The MIC Series 612 has 24 individual privacy masks,
with up to eight displayed in the same scene. Unlike
conventional privacy masks, these can be programmed
with three, four, or even five corners each to cover
more complex shapes. Each mask changes size and
shape smoothly and quickly, ensuring that the covered
object cannot be seen. Each mask can appear in black,
white, or blurred. Blurred is useful when privacy is an
issue, but determining the presence of motion is still
required.
As PTZ cameras continue to increase their optical
zoom capabilities, image stabilization becomes critical
to eliminate movement caused by unstable camera
mounts. A mere quarter-inch of movement of the
camera mount can shift the field of view by more than
6 m (20 feet) when the camera is zoomed to a high
value. This can render images unusable. Image
stabilization algorithms in the optical camera reduce
camera shake in both the vertical and horizontal axis,
resulting in exceptional image clarity (pixel
displacement up to +/- 10% for frequencies up to 10
Hz) without reducing camera sensitivity.
Easy installation and servicing
The MIC Series 612 is compatible with all MIC Series
brackets and control equipment for easy installation,
integration, and operation. These brackets, as well as
connection cables and power supply units for the
camera, are sold separately. The camera can be
installed upright or inverted. No matter the installation
position, the camera will operate faultlessly.
Bosch’s Configuration Tool for Imaging Devices
(CTFID) allows users to control the PTZ, change
camera settings, and update firmware from remote
locations without need for additional wiring.
The camera has advanced built-in diagnostics to
simplify service and minimize downtime. Using the Onscreen Display (OSD), a technician can quickly and
easily check critical parameters (such as internal
temperature) to verify that the camera is functioning
within acceptable operating limits.
Integrated long-life silicone wiper
Thanks to its integrated wiper, the MIC Series 612 is
able to capture the highest possible quality image
regardless of the weather.
3 | MIC Series 612 Thermal Camera
Certifications and Approvals
Video Output
1.0 Vp-p, 75 Ohm
Electromagnetic
Compatibility (EMC)
Gain Control
Auto/Manual/Max.
(-3 dB to +28 dB, 2 dB steps)
Aperture
Correction
Horizontal and vertical
Digital Zoom
12x
Horizontal
Resolution
550 TVL (NTSC, PAL) typical
Sensitivity ¹
30 IRE
50 IRE
SensUp Off
0.66 lux
1.4 lux
SensUp On
(NTSC: 1/4s,
15X;
PAL 1/3s,
16.7X)
0.04 lux
0.1 lux
SensUp Off
0.104 lux
0.209 lux
SensUp On
(NTSC: 1/4s,
15X;
PAL 1/3s,
16.7X)
0.0052 lux
0.0103 lux
Filter
Automatic IR cut filter
Electronic
Shutter Speed
1/1 to 1/10,000 seconds (22 steps)
Wide Dynamic
Range (WDR)
92 dB (50 dB with WDR Off)
Signal-to-Noise
Ratio (SNR)
>50 dB
White Balance
2000 K to 10,000 K
Complies with FCC part 15, ICES-003, and
CE regulations including EN50130-4:
2011, EN55022: 2010, EN50121-4:
2006, EN61000-4-2, 4-3, 4-4, 4-5, 4-6,
4-8, and 4-11
Safety
Complies with CE regulations, UL, EN, and
IEC standards 60950-1 & 22
Ingress Protection
Rating/Standard
IP68, NEMA 6P
IK Code
IK10
Day Mode
Installation/Configuration Notes
The table below identifies the resolution and the thermal frame rate for the various model mixes of MIC612.
Model
Resolution
Frame Rate
MIC612TI-
Standard
7.5Hz (NTSC)
8.3Hz (PAL)
MIC612TF-
Standard
25Hz (PAL)
30Hz (NTSC)
MIC612HI-
High
7.5Hz (NTSC)
8.3Hz (PAL)
MIC612HF-
High
25Hz (PAL)
30Hz (NTSC)
Notice
Models of 25 Hz or 30 Hz require specific export
licenses--one license per customer--arranged prior
to the camera being built. MIC612TF- models require an export license from the U.S. Department
of Commerce. MIC612HF- models require an export license from the U.S. Department of State.
For more information, contact your local Bosch
Security Systems Customer Service Center.
Night Mode
1 Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max
AGC
Technical Specifications
Optical Camera Core, 36x Day/Night
Thermal Camera Core, Standard Resolution (35 mm)
Imager
Focal Plane Array (FPA), un-cooled
Vanadium Oxide microbolometer with userselectable on-screen temperature display
(spot meter)
- 7.5 Hz NTSC, 8.3 Hz PAL
- 30 Hz NTSC, 25 Hz PAL; US export license
required.
4.0 seconds (optical Wide to optical TELE)
6.2 seconds (optical wide to digital TELE)
Resolution/Effective
Picture Elements
PAL: 320 x 256
NTSC: 320 x 240
Lens
35 mm (F1.2)
Focus
Automatic with manual override
Field of View (FOV)
13° x 10°
Iris
Automatic with manual override
Spectral Response
7.5 to 13.5 μm
Field of View
(FOV)
1.7º to 57.8º
Thermal Sensitivity
(NEDT)
<50mk f/1.0
Imager
¼ in.-type EXview HAD CCD (progressive scan)
Resolution/
Effective
Picture Elements
PAL: Approximately 440,000; 752(H) x 582(V)
NTSC: Approximately 380,000; 768(H) x 494(V)
Lens
36x Zoom (3.4 mm to 122.4 mm)
F1.6 to F4.5
Zoom Movement
Speed
4 | MIC Series 612 Thermal Camera
Digital Zoom
2x, 4x
Focus
Factory-set at infinity focus
Performance Range
Human 1.8 x 0.5 m
(5.9 x 1.6 ft)
Object 2.3 x 2.3 m
(7.5 x 7.5 ft)
Detection
800 m (2625 ft)
2250 m (7382 ft)
Recognition
200 m (656 ft)
590 m (1936 ft)
Identification
105 m (344 ft)
290 m (951 ft)
User-selectable
AGC Modes
Outdoor (default mode)
Indoor
Low Contrast
User-selectable
Thermal Modes
(Color Options)
White Hot (default mode)
Black Hot
IceFire
Glowbow
Ironbow 1
Ironbow 2
Rainbow
Fusion
Sepia
Color 1
Color 2
RedHot
GreenHot
Rain
User-selectable
Thermal Modes
(Color Options)
White Hot (default mode)
Black Hot
IceFire
Glowbow
Ironbow 1
Ironbow 2
Rainbow
Fusion
Sepia
Color 1
Color 2
RedHot
GreenHot
Rain
Mechanical
Drive Unit
Brushless integral pan/tilt motor drive
Pan Range
360° continuous rotation
Tilt Angle
180°
Tilt Range
-58° to +90°
Variable Speed
Pan: 0.2° to 72° per second (variable)
Tilt: 0.2° to 90° per second (variable)
Pre-Position Speed
120°/second
Preset Accuracy
±0.30° (typical)
Thermal Camera Core, High Resolution (50 mm)
Proportional Pan / Tilt to
Zoom
Yes
Imager
Focal Plane Array (FPA), un-cooled Vanadium
Oxide microbolometer
- 7.5 Hz NTSC, 8.3 Hz PAL
- 30 Hz NTSC, 25 Hz PAL; US export license
required.
Audible Noise
<66dB
Input Voltage (dual source)
18 VAC, ±10%, 50/60 Hz
Resolution/Effective
Picture Elements
PAL: 640 x 512
NTSC: 640 × 480
Power Consumption
Camera: 36 VA
With heater: 54 VA
Lens
50 mm (F1.2)
Input Current
Field of View (FOV)
12.4° x 9.9°
Camera: 2 A
Heater: 1 A
Spectral Response
7.5 to 13.5 μm
Miscellaneous
Thermal Sensitivity
(NEDT)
<50mk f/1.0
Sectors / Titling
16 independent sectors, each with 20-character
title
Digital Zoom
2x, 4x
Privacy Masking
24 individually-configurable privacy masks
Focus
Factory-set at infinity focus
Prepositions
99, each with 20-character title
Performance Range
Human 1.8 x 0.5 m
(5.9 x 1.6 ft)
Object 2.3 x 2.3 m
(7.5 x 7.5 ft)
Guard Tours
Detection
1500 m (4921 ft)
3900 m (12,795 ft)
Recognition
380 m (1247 ft)
1060 m (3478 ft)
Recorded Tours - two (2), total duration 15
minutes
Preset Tours – one (1), consisting of up to 99
scenes, consecutively, and one (1) customized up
to 99 scenes
Identification
190 m (623 ft)
540 m (1772 ft)
Camera Setup /
Control
RS-485, Bilinx (coax)
User-selectable
AGC Modes
Outdoor (default mode)
Indoor
Low Contrast
Communications
Protocols
Bosch (Bilinx, OSRD), Pelco D/P
Bosch OSRD requires use of converter device
(MIC-BP3 or MIC-BP4, sold separately).
(Bicom/Bilinx support on visible channel only.)
Electrical
5 | MIC Series 612 Thermal Camera
Washer Drive
Optional washer kit (MIC-WKT Kit used with the
appropriate HAC-WAS washer pump)
Viewing Window
Tempered flat glass (optical) and germanium
covering (thermal)
Supported
Languages
English, Czech*, Dutch, French, German, Italian,
Portuguese, Russian*, Spanish
Construction
Material
Machined aluminum
Standard Colors
Black (RAL9005), White (RAL9010);
Grey (RAL9006, available in specific regions)
Standard Finish
Alodine 5200 surface treatment with powder coat
paint, sand finish
* Available with separate language upload
User Connections
Power
Via composite cable (sold separately)
Control Data
RS-485 (Twisted pair; Simplex, half and full
duplex operation via composite cable)
Biphase ±
(Optional; requires MIC Biphase module with
external power supply.)
Window Wiper
Standard, long-life silicone wiper
Heater
Standard
Sunshield
Optional; sold separately
Video
Dual coaxial via composite cable (sold separately)
(Optical and optical/thermal cameras selectable.)
Dimensional Drawings
Alarm Inputs
One (1) tamper input (eight (8) additional inputs
possible with optional alarm card)
Relay Outputs
Two (2) relay outputs and washer relay output
only with optional alarm card
Alarm
Communication
Tamper switch (ground connection)
Software
CTFID software allows direct connection to a USBequipped PC via the MIC Series PSU over a full
duplex to provide access to all camera functions
and useful diagnostic tools.
267.00
201.25
181.00
Environmental
Ingress Protection
Rating/Standard
IP68/NEMA 6P
Operating Temperature
(with heater)
-40 °C to +60 °C (-40 °F to +140 °F)
Cold Start-up
Temperature
-40 °C (-40 °F)
(Requires 30-minute warm-up prior to PTZ
operations.)
Storage Temperature
-40 °C to +70 °C (-40 °F to +158 °F)
Humidity
0-100%
Wind Load
(Estimated)
240 kph (150 mph) (sustained)
Camera: 517 N (116 lbf)
Wall Mount: 130 N (29 lbf)
Effective Projected Area (EPA):
Camera: 0.192 m² / 2.06 ft²
Wall Mount: 0.0483 m² / 0.52 ft²
Vibration
IEC 60068-2-6, Test Fc: Vibration
(operational), 10m/s² (1.0g)
Shock
IEC 60068-2-27, Test Ea: Shock, 30g
IK Code
IK10
Construction
Dimensions
(W x H x D)
267 mm x 452 mm x 201 mm
(10.5 in. x 17.8 in. X 7.9 in.)
Weight
10.66 kg (23.50 lb)
(including 4-in. pitch circle diameter (PCD) base)
452.20
Ordering Information
MIC-612TIALB36N
PTZ, dual thermal/optical camera, NTSC, Black, 36x
optical zoom, 320x240 thermal picture elements, 7.5
Hz thermal imager frame rate, 35 mm thermal lens.
Order number MIC-612TIALB36N
MIC-612TIALW36N
PTZ, dual thermal/optical camera, NTSC, White, 36x
optical zoom, 320x240 thermal picture elements, 7.5
Hz thermal imager frame rate, 35 mm thermal lens.
Order number MIC-612TIALW36N
MIC-612TIALB36P
PTZ, dual thermal/optical camera, PAL, Black, 36x
optical zoom, 320x256 thermal picture elements, 8.3
Hz thermal imager frame rate, 35 mm thermal lens.
Order number MIC-612TIALB36P
6 | MIC Series 612 Thermal Camera
MIC-612TIALW36P
PTZ, dual thermal/optical camera, PAL, White, 36x
optical zoom, 320x256 thermal picture elements, 8.3
Hz thermal imager frame rate, 35 mm thermal lens.
Order number MIC-612TIALW36P
MIC-612TIALG36P
PTZ, dual thermal/optical camera, PAL, Grey, 36x
optical zoom, 320x256 thermal picture elements, 8.3
Hz thermal imager frame rate, 35 mm thermal lens.
Order number MIC-612TIALB36P
MIC-612TFALB36N
PTZ, dual thermal/optical camera, NTSC, Black, 36x
optical zoom, 320x240 thermal picture elements, 30
Hz thermal imager frame rate, 35 mm thermal lens.
Requires U.S. Department of Commerce export
license--one license per customer--arranged prior to
camera being built.
Order number MIC-612TFALB36N
MIC-612TFALW36N
PTZ, dual thermal/optical camera, NTSC, White, 36x
optical zoom, 320x240 thermal picture elements, 30
Hz thermal imager frame rate, 35 mm thermal lens.
Requires U.S. Department of Commerce export
license--one license per customer--arranged prior to
camera being built.
Order number MIC-612TFALW36N
MIC-612TFALD36N
PTZ, dual thermal/optical camera, NTSC, Sand, 36x
optical zoom, 320x240 thermal picture elements, 30
Hz thermal imager frame rate, 35 mm thermal lens.
Requires U.S. Department of Commerce export
license--one license per customer--arranged prior to
camera being built.
Requires U.S. Department of Commerce export
license--one license per customer--arranged prior to
camera being built.
Order number MIC-612TFALG36P
MIC-612HIALB36N
PTZ, dual thermal/optical camera, NTSC, Black, 36x
optical zoom, 640x480 thermal picture elements, 7.5
Hz thermal imager frame rate, 50 mm thermal lens.
Order number MIC-612HIALB36N
MIC-612HIALB36P
PTZ, dual thermal/optical camera, PAL, Black, 36x
optical zoom, 640x512 thermal picture elements, 8.3
Hz thermal imager frame rate, 50 mm thermal lens.
Order number MIC-612HIABL36P
MIC-612HFALB36N
PTZ, dual thermal/optical camera, NTSC, Black, 36x
optical zoom, 640x480 thermal picture elements, 30
Hz thermal imager frame rate, 50 mm thermal lens.
Requires an export license--one license per customer-from the U.S. Department of State prior to camera
being built.
Order number MIC-612HFALB36N
MIC-612HFALB36P
PTZ, dual thermal/optical camera, PAL, Black, 36x
optical zoom, 640x512 thermal picture elements, 25
Hz thermal imager frame rate, 50 mm thermal lens.
Requires an export license--one license per customer-from the U.S. Department of State prior to camera
being built.
Order number MIC-612HFALB36P
Accessories
MIC-24PSU-2 MIC Power Supply Unit, 24VAC, 50/60 Hz
Order number MIC-612TFALG36N
24 VAC, 50/60 Hz power supply with two video
outputs for MIC Series cameras.
MIC-612TFALB36P
Order number MIC-24PSU-2
PTZ, dual thermal/optical camera, PAL, Black, 36x
optical zoom, 320x256 thermal picture elements, 25
Hz thermal imager frame rate, 35 mm thermal lens.
Requires U.S. Department of Commerce export
license--one license per customer--arranged prior to
camera being built.
MIC-115PSU-2 MIC Power Supply Unit, 120VAC, 50/60
Hz
Order number MIC-612TFALB36P
MIC-612TFALW36P
PTZ, dual thermal/optical camera, PAL, White, 36x
optical zoom, 320x256 thermal picture elements, 25
Hz thermal imager frame rate, 35 mm thermal lens.
Requires U.S. Department of Commerce export
license--one license per customer--arranged prior to
camera being built.
Order number MIC-612TFALW36P
MIC-612TFALG36P
PTZ, dual thermal/optical camera, PAL, Grey, 36x
optical zoom, 320x256 thermal picture elements, 25
Hz thermal imager frame rate, 35 mm thermal lens.
115 VAC, 50/60 Hz power supply with two video
outputs for MIC Series cameras.
Order number MIC-115PSU-2
MIC-240PSU-2 MIC Power Supply Unit, 230 VAC, 50/60
HZ
230 VAC, 50/60 Hz power supply with two video
outputs for MIC Series cameras.
Order number MIC-240PSU-2
MIC-THERCBL-2M MIC 2M Composite Cable for Thermal
Cameras
Order number MIC-THERCBL-2M
MIC-THERCBL-10M MIC 10M Composite Cable for Thermal Cameras
Order number MIC-THERCBL-10M
7 | MIC Series 612 Thermal Camera
MIC-THERCBL-20M MIC 20M Composite Cable for Thermal Cameras
Order number MIC-THERCBL-20M
MIC-THERCLB-25M MIC 25M Composite Cable for Thermal Cameras
Order number MIC-THERCBL-25M
MIC-DCA-BD Deep Conduit Adapter, Black
Deep conduit adapter for 4 in. PCD base, black sand
finish (RAL9005)
Order number MIC-DCA-BD
MIC-DCA-WD Deep Conduit Adapter, White
Deep conduit adapter for 4 in. PCD base, white sand
finish (RAL9010)
Order number MIC-DCA-WD
MIC-DCA-GD Deep Conduit Adapter, Grey
Deep conduit adapter for 4 in. PCD base, grey sand
finish (RAL 9006)
Order number MIC-DCA-GD
MIC-SCA-BD Shallow Conduit Adapter, Black
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR, black sand finish (RAL9005)
Order number MIC-SCA-BD
MIC-SCA-WD Shallow Conduit Adapter, White
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR mount, white sand finish (RAL9010)
MIC-WMB-BD Wall Mount Bracket, Black
Wall mount bracket, black sand finish (RAL9005)
Order number MIC-WMB-BD
MIC-WMB-WD Wall Mount Bracket, White
Wall mount bracket, white sand finish (RAL9010)
Order number MIC-WMB-WD
MIC-WMB-GD Wall Mount Bracket, Grey
Wall mount bracket, grey sand finish (RAL9006)
Order number MIC-WMB-GD
MIC-WMBULTRA Wall Mount Bracket, Light Stone
RAL9006
Wall Mount Bracket, Light Stone (RAL9006) for
MIC412ULTRA and MIC-612ALULTRA.
Order number MICWMBULTRA
MIC-PMB Pole Mount Bracket
Pole mount bracket (includes 2 x 455 mm stainless
steel banding straps for pole diameters 75 to 145 mm)
Order number MIC-PMB
MIC-BP3 Biphase Converter
Biphase converter for IR power supplies or non-IR
power supplies without a free expansion slot available
Order number MIC-BP3
MIC-BP4 Biphase Converter
Biphase converter for non-IR versions of MIC series
power supply units
Order number MIC-SCA-WD
Order number MIC-BP4
MIC-SCA-GD Shallow Conduit Adapter, Grey
MIC-516ALM Alarm Card
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR, grey sand finish (RAL 9006)
Order number MIC-SCA-GD
MIC-SPR-BD Spreader Plate, Black
Aluminum spreader plate suitable for brickwork
surface mounting, black sand finish (RAL9005)
Order number MIC-SPR-BD
MIC-SPR-WD Spreader Plate, White
Aluminum spreader plate suitable for brickwork
surface mounting, white sand finish (RAL9010)
Order number MIC-SPR-WD
MIC-SPR-GD Spreader Plate, Grey
Aluminum spreader plate suitable for brickwork
surface mounting, grey sand finish (RAL 9006)
Order number MIC-SPR-GD
MIC-CMB-BD Corner Mount Bracket, Black
Corner mount bracket, black sand finish (RAL9005)
Order number MIC-CMB-BD
MIC-CMB-WD Corner Mount Bracket, White
Corner mount bracket, white sand finish (RAL9010)
Order number MIC-CMB-WD
MIC-CMB-GD Corner Mount Bracket, Grey
Corner mount bracket, grey sand finish (RAL 9006)
Order number MIC-CMB-GD
8 Input alarm card for MIC-516KBD
Order number MIC-516ALM
MIC-ALM Alarm and Washer Pump Drive Card
8 Input alarm and washer pump drive card for PSU
(Not for IR PSU)
Order number MIC-ALM
MIC-WKT Washer Kit
Washer kit for non infrared MIC models (includes
washer pump drive card, washer nozzle and mounting
brackets for wall and 4 in. PCD base)
Order number MIC-WKT
HAC-WAS05-20 24 VAC Washer
24 VAC washer inst. 4M 25L
Order number HAC-WAS05-20
HAC-WAS30-50 230 VAC Washer
230 VAC washer inst. 30M 25L
Order number HAC-WAS30-50
MIC-412-RWAC Replacement Wiper Assembly for
MIC412 and MIC612, Silver
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC412 and
MIC612 cameras; silver.
Order number MIC-412-RWAC
8 | MIC Series 612 Thermal Camera
MIC-412-RWAB Replacement Wiper Assembly for
MIC412 and MIC612, Black
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC412 and
MIC612 cameras; black.
Order number MIC-412-RWAB
Software Options
VP-CFGSFT Configuration Tool for Imaging Devices
Camera configuration software for use with Bilinx
cameras
Order number VP-CFGSFT
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2012 | Data subject to change without notice
2326444939 | en, V11, 27. Jul 2012
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
al.securitysystems@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com