C 12 DUO
The first cordless drill and
plasterboard screwdriver with
accurate depth stop
r all
y fo uck
r
o
s
h
cces
ix c
an a a FastF
s
a
le
with
ilab
ava chines
o
s
Al
ma
ool
Fest
Drilling with the C 12 cordless drill
with CENTROTEC: rapid bit changes,
true-running bits and reliable transfer
of force make work easier.
C 12 as a screwdriver with depth stop:
ensures precise screw depth and consistent
results when countersinking screws in
wood.
EC-TEC by Festool,
the high-performance concept:
• Brushless motor for maximum service life
and maximum battery efficiency
Easily remove screws without changing
the depth setting: simply reverse direction
and turn the "Quick-out" ring - there's no
need to remove the tip.
• Ultra-light with maximum fastening
capacity
• Impressive ergonomics make your work
easier
• CENTROTEC tool system: Rapid bit
changes and true-running
No Compromises!
Seen at Ideal Tools.
Cordless drill and plasterboard screwdriver C 12 DUO
One tool – two solutions
1 Fast function changes: FastFix
The proven FastFix system allows you to
convert the C 12 from a drill to a screwdriver
and vice versa in an instant.
1
2 The right depth.
The integral clutch system on the depth stop
maintains the preset fastening depth.
1
2
3 Quicker bit changes.
The alloy tip can be removed, so you
3
can change the bit in no time at all.
4
4 Screw in – screw out.
Remove screws without changing the depth setting. The
integral "Quick-out" ring allows for quick and simple screw
removal.
Technical data
Voltage
No-load speed
Max. drilling diameter
Torque preset range
Max. torque
Chuck capacity
Battery capacity
Charging time
Weight (including battery)
12 V
1st / 2nd gear
0-450 / 0-1500 rpm
wood / steel
25 / 14 mm
1st / 2nd gear
2-7 / 0.5-2.5 Nm
soft (wood) / hard (steel) 18 / 30 Nm
1-13 mm
C NiCd / S NiMH
1.3 / 3.0 Ah
C NiCd / S NiMH
25 / 70 min
C NiCd / S NiMH
1.8 / 2.0 kg
Type
Order no.
C 12 DUO NiCd 1.3 Plus
564 192
C 12 DUO NiMH 3.0 Plus
564 188
Scope of delivery: depth stop DD-DC, charger LC 45, CENTROTEC tool chuck,
spiral drill bit D4 CENTROTEC, bit holder CENTROTEC, FastFix chuck
13 mm, bit PH 2, bit PZ 2, spare battery pack C NiCd, 1.3 Ah
in a Systainer
Scope of delivery: depth stop DD-DC, charger LC 45, CENTROTEC tool chuck,
spiral drill bit D4 CENTROTEC, bit holder CENTROTEC, FastFix chuck
13 mm, bit PH 2, bit PZ 2, spare battery pack S NiMH, 3.0 Ah
in a Systainer
One for all.
The depth stop fits on all Festool
cordless drills with a FastFix
chuck:
FastFix – the fastening system with versatility
Festool's new depth stop attachment offers you another
efficient fastening solution, complementing the established
FastFix range: CENTROTEC tool chuck, keyless chuck,
- C 12
- TDK 12 / TDK 15.6
eccentric chuck and angle adapter.
- CDD 9.6 / CDD 12
- TDD 9.6 / TDD 12 / TDD 14.4
Dealer address
Type
Order no.
Depth Stop DD-DC
493 539
TTS Tooltechnic Systems (AUST) P/L
63-65 Quantum Close/PO Box 4401
Dandenong VIC 3175/3164
Phone: 03 9799 9733
Fax: 03 9799 9766
Service Hotline: 1800 063 900
E-mail: festool@festool.com.au
www.festool.com.au
Festool reserves the right to correct any errors or omissions. Images are for illustrative
purposes only and do not necessarily reflect safe work practice. Always consult the user's
manual and safety instructions before operating a power tool.
Seen at Ideal Tools.