Use & Care Guide
Refrigerator Drawers
Guia de Uso y Cuidado
Cajones de refrigerador
Guide D’utilisation et D’entretien
Tiroirs de réfrigérateur
Electrolux ICONTM
242000100 December 2008
2
Finding Information
Table of Contents
Finding Information............................................2
Safety...................................................................3
Installation...........................................................4
Start-Up and Temperature Control....................7
Operation.............................................................8
Maintenance........................................................9
Troubleshooting..................................................11
Warranty Information.........................................12
IMPORTANT
PLEASE READ all instructions completely before
attempting to install or operate the unit.
All refrigerator drawers require a connection to
an electrical power source. Improper hook-up can
result in a safety hazard and potential damage
to the product or contents! Proper installation, in
accordance with the manufacturer’s specifications
and all local codes, is the sole responsibility of the
consumer. The manufacturer is not responsible
for any installation expenses or damages incurred
due to improper installation. If you are unsure of
your ability to safely connect electric power to the
unit, consult a licensed and insured professional to
perform all electrical work.
Please Read and Save This Guide
Thank you for choosing Electrolux, the new premium
brand in home appliances. This Use & Care Guide is
part of our commitment to customer satisfaction and
product quality throughout the service life of your new
refrigerator drawers.
We view your purchase as the beginning of a
relationship. To ensure our ability to continue serving
you, please use this page to record key product
information.
Once you have your unit installed, we suggest
you keep this manual in a safe place for future
reference. Should any problems occur, refer to the
“Troubleshooting” section of this manual. This
information will help you quickly identify potential
problems and provide Suggested Solutions. In the
event you require assistance, please contact the
dealer where you purchased your unit.
Make a Record for Quick
Reference
Whenever you call to request information or service,
you will need to provide your model number and serial
number. You can find this information on the serial
plate located on the ceiling of your unit and on the
product registration card.
Product Registration Card
The package containing this manual also includes
your product registration information. Warranty
coverage begins at the time your Electrolux
refrigerator drawers were purchased.
NOTE
Registering your product with Electrolux enhances
our ability to serve you. You can register online at
www.electroluxappliances.com or by dropping
your Product Registration Card in the mail. Complete
and mail the Product Registration Card as soon as
possible to validate the registration date.
Please record the purchase date of your Electrolux
unit and your dealer’s name, address, and telephone
number.
_________________________________________
Purchase Date
_________________________________________
Electrolux Model Number
_________________________________________
Electrolux Serial Number
_________________________________________
Dealer Name
_________________________________________
Dealer Address
_________________________________________
Dealer Telephone
Keep this manual and the sales receipt together in a
safe place for future reference. We also recommend
stapling your receipt to this page for safe keeping.
Questions?
For toll free telephone support in the U.S. and Canada:
1-877-4ELECTROLUX (1-877-435-3287)
For online support and Internet product information:
www.electroluxicon.com
Safety
Important Safety Instructions
Safety Precautions
Do not attempt to install or operate your unit until
you have read the safety precautions in this manual.
Safety items throughout this manual are labeled with a
Danger, Warning, or Caution based on the risk type.
Definitions
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
DANGER
DANGER indicates an imminently hazardous
situation that, if not avoided, will result in death
or serious injury.
General Precautions
warning
RISK OF CHILD ENTRAPMENT. Before you
recycle your old appliance, take off the doors
and leave shelves in place so that children may
not easily climb inside.
WARNING
• Never attempt to repair or perform
maintenance on the appliance until the
electricity has been disconnected.
• Altering, cutting the power cord, removing the
power cord, removing the power plug, or direct
wiring can cause serious injury, fire, and/or
loss of property and/or life and will void the
warranty.
• Do not lift the appliance by the door handle.
WARNING
WARNING indicates a potentially hazardous
situation that, if not avoided, may result in death
or serious injury.
CAUTION
CAUTION indicates a potentially hazardous
situation that, if not avoided, may result in minor
or moderate injury.
IMPORTANT
Indicates installation, operation, or maintenance
information that is important but not hazard-related.
CAUTION
• Use care when moving the appliance.
Some edges are sharp and may cause
personal injury. Wear gloves when moving or
repositioning the unit.
• Never install the appliance behind closed
doors. Be sure front grille is free of
obstruction. Obstructing free air flow can
cause the unit to malfunction and may void the
warranty.
• Allow appliance temperature to stabilize for 24
hours before using.
CAUTION
• Use only genuine Electrolux replacement parts.
Imitation parts can damage the unit and may
void the warranty.
3
4
Installation
Installing the Refrigerator
Drawers
attention
This installation procedure is intended for use by
persons having electrical and mechanical training
and a level of knowledge of these subjects generally
considered acceptable in the appliance repair trade.
Electrolux Home Products cannot be responsible,
nor assume any liability, for injury or damage of any
kind arising from the use of this manual.
Your Electrolux refrigerator drawers have been
designed for built-in installation. When built-in, your
refrigerator drawers do not require additional air space
for top, sides, or rear. The front grille must NOT be
obstructed.
Your Electrolux refrigerator drawers may have either
the Professional or Designer handles shown below.
For ease of explanation, we will be showing only the
Designer handles in most of the illustrations in this
guide.
ICON Designer
ICON Professional
NOTE
•
•
•
To ease appliance installation and removal,
we recommend the cabinet rough opening
dimensions be increased by at least ¼ inch over
the dimensions given for your appliance.
If the unit is being installed into an existing
opening that does not match the product
dimensions, the anti tip bracket will not engage
properly. Custom modifications will need to be
made.
Mounting screws provided are intended for
mounting bracket directly to wall studs. These
screws will not work if used with sheetrock
(dry wall) or anything other than wall studs.
Longer screws will be required for those type
of applications.
WARNING
Double drawer Refrigerator Drawers are
designed to be built-in only. The appliance can
not be free-standing.
Installation
Width
Height
Depth
23 /16 inch
34-35 inches
263/4 inch
13
Professional Product
Dimensions
3.25”
2.75”
Width
Height
Depth
23 /16 inch
34-35 inches
263/4 inch
13
Designer Product
Dimensions
2.75”
5
6
Installation
Site Preparation
1 Position the appliance on a flat, level surface
capable of supporting the entire weight of
the unit. Remember the appliance will be
significantly heavier once it is fully loaded.
warning
The Anti-Tip Kit must be installed on this unit
before it is used. Double stacking units may
cause serious personal injury.
2 This appliance requires a grounded and
polarized 115 VAC, 60Hz, 15A circuit (normal
household current).
3 Avoid connecting the unit to a Ground Fault
Interruptor (GFI). GFIs are prone to nuisance
tripping which will cause the unit to shut down.
GFIs are generally not used on circuits which
power equipment that must run unattended for
long periods of time.
4 The appliance must be installed according to
your local codes and ordinances.
warning
ELECTROCUTION HAZARD!
Electrical Grounding Required - This appliance
is equipped with a three prong (grounding)
polarized plug for your protection against
possible shock hazards.
• NEVER remove the round grounding prong
from the plug.
• NEVER use a two-prong grounding adapter.
• NEVER use an extension cord to connect
power to the unit.
Where a two-prong wall receptacle is
encountered or a longer power cord is required,
contact a qualified electrician to have it replaced
in accordance with applicable electrical codes.
5 Position the appliance to allow free air flow
through the front grille.
6 Wipe out inside of unit with a damp cloth.
7 Be sure to install the Anti-Tip bracket. Follow the
instructions provided with the Anti-Tip bracket
kit.
Leveling the Appliance
Position the appliance on a flat, level surface capable
of supporting the entire weight when full.
This appliance contains four (4) adjustable
leveling legs. Turn the legs clockwise to raise and
counterclockwise to lower.
Start-Up and Temperature Control
Starting the Appliance
Your refrigerator drawers appliance is shipped in the ON position; however, you may turn it ON or OFF by
pressing and holding the ON/OFF for three (3) seconds and then releasing the key.
Adjusting the Temperature
To accurately check the temperature, insert a reliable thermometer into a
plastic (non-breakable) bottle, partially filled with water. Tighten the bottle
cap securely.
Place the bottle in the desired area for 24 hours. Refrain from opening the
appliance during the testing period. After 24 hours, check the temperature
of the water.
Press and release the (+) or (–) indicator to adjust the temperature to the
desired setting. The temperature display will begin to blink with the first
touch and release. Adjust the temperature by touching and releasing the
key. After three (3) seconds of inactivity, the display will beep to accept
the new temperature.
Factors that affect the internal temperatures of the cabinet include:
1 Temperature setting
2 Room temperature where installed
3 Number of times the door is opened and closed
4 Amount of time the internal light is illuminated
5 Installation in direct sunlight or near a heat source which we do not recommend.
7
8
Operation
Description of Features
“HI” will stay illuminated until a normal
safe range operating temperature has been
reached, at which time the temperature
display will show the actual temperature.
vacation mode Conserves energy by disabling interior
lights and keypad inputs.
mute sounds
Tones emitted by each keypress can be
turned off based on user preference. The
sounds are muted when the red indicator
is lit. The mute sounds key also is used
to acknowledge alarm conditions, denoted
by a flashing red indicator. Press and
hold the mute sounds key for three (3)
seconds then release to enable control
lock, which prevents undesired changes
to the unit settings. Temperature display
will show “LOC”.
temperature
Simultaneously press and hold the (+) and
(–) keys for three (3) seconds then releasing the key causes the temperature display
to toggle from Fahrenheit to Celsius and
back again.
on off
mode
Press and hold for three (3) seconds then
release the key. This allows the user to
turn off the cooling system. The temperature display will display “OFF”. THIS DOES
NOT REMOVE POWER FROM THE UNIT.
Alarms
door ajar
high temp
If the door has been left open for five (5)
minutes, an audible alarm will sound and
the door ajar indicator will illuminate on
the right side of the display. The mute
sounds indicator will blink. Pressing
and releasing the mute sounds key will
acknowledge the alarm and disable the
audible portion. The door ajar indicator will continue to blink until the door is
closed.
In the event of a high temperature condition, an audible alarm will sound, the
temperature display will blink and display
“HI”, and the high temp indicator on the
right side of the display will blink. The
mute sounds indicator will blink. Pressing and releasing the mute sounds key
will acknowledge the alarm and disable
the audible portion. All other modes are
turned off until the alarm is acknowledged.
The high temperature indicator and
power fail
In the event of a power failure or initial
power-up, an audible alarm will sound
and the power fail indicator on the right
side of the display will blink. The mute
sounds indicator will blink. Pressing
and releasing the mute sounds key will
acknowledge the alarm and disable the
audible portion. All other functions are
disabled until the alarm is acknowledged,
at which point the power fail indicator is
turned off and the unit will resume normal
operation. The high temp alarm may
also be illuminated until a safe temperature
has been reached.
Notifications
air filter After six months of use the display will
show AF. This is a reminder that it is
time to change the PureAdvantageTM
air filter. The product will continue to
function normally. Pressing any key will
reset the reminder for 10 minutes. Once
the PureAdvantageTM air filter is replaced,
pressing the “On/Off” and “– “ keys for
three seconds will reset the reminder for
another six months.
Sabbath Mode
Sabbath mode disables portions of the
unit and its controls in accordance with
the weekly Sabbath and religious holidays
observed within the Orthodox Jewish
community.
Sabbath mode is enabled and disabled by pressing and
holding the vacation mode key for five (5) seconds and
then releasing the key. Temperature display shows “Sb”
while in Sabbath mode.
Operation / Maintenance
The customer may open or close the door at any time
without concern of directly turning on or off any lights,
digital readouts, solenoids, fans, valves, compressor,
icons, tones or alarms. After power failure, the
appliance will immediately return to Sabbath mode.
To remove the bottom drawer:
1. Fully extend the drawer.
2. Remove two screws using Phillips® screwdriver.
While in Sabbath mode, alarm indicators will not
illuminate, nor be accompanied by audible alarms.
3. Remove drawer by sliding forward 1/2” and pull up.
For further assistance, guidelines for proper usage
and a complete list of models with the Sabbath
feature, please visit the web at http:\\www.star-k.org.
4. Reverse procedure to reinstall drawer.
Removing Your Refrigerator
Drawers
To remove the top drawer:
1. Fully extend the drawer.
2. Disconnect connector.
3. Remove two screws using Phillips® screwdriver.
4. Remove drawer by sliding forward 1/2” and pull up.
5. Reverse procedure to reinstall drawer.
Disconnect
Connector
Maintaining Your Refrigerator
Drawers
Periodic cleaning and proper maintenance will
ensure efficiency, top performance, and long life. The
maintenance intervals listed are based on normal
conditions. You may want to shorten the intervals if you
have pets or other special considerations.
Exterior Cleaning for Your Stainless Steel
Model
• Your stainless steel model may discolor when
exposed to chlorine gas, pool chemicals, salt
water, cleaners with bleach, or citrus based
cleansers.
• Keep your stainless appliance looking new by
cleaning with a high quality, all-in-one stainless
steel cleaner/polish and a soft cloth on a
monthly basis. Frequent cleaning will remove
surface contamination that could lead to rust.
Some installations will require cleaning on a
weekly basis.
• DO NOT CLEAN WITH STEEL WOOL PADS.
• DO NOT USE CLEANERS THAT ARE NOT
SPECIFICALLY INTENDED FOR STAINLESS
STEEL (this includes glass, tile, and counter
cleansers).
• If any surface discolors or rusting appears, clean
it quickly with Bon-Ami® or Barkeepers Friend®
Cleanser and a non-abrasive cloth. Always clean
9
10 Maintenance
in the direction of the grain. Always finish this
process with a high quality, all-in-one stainless
steel cleaner/polish to prevent further problems.
• USE OF ABRASIVE PADS SUCH AS
SCOTCHBRITE WILL CAUSE THE GRAINING
IN THE STAINLESS TO BECOME BLURRED.
• Rust that is allowed to linger can penetrate into
the surface of the stainless steel and become
impossible to remove.
CAUTION
• Stainless steel models exposed to chlorine
gas and moisture such as areas with spas or
swimming pools, may have some discoloration
of the stainless steel. Discoloration from
chlorine gas is normal. Follow exterior cleaning
instructions.
• NEVER USE CHLORIDE TO CLEAN STAINLESS
STEEL.
Interior Cleaning - as Required
1 Disconnect power to the refrigerator drawers.
2 Wipe down the interior with a solution of nonabrasive mild detergent and warm water.
3 Rinse with clear water.
4 Reconnect power to the unit.
To Replace the Air Filter:
­1. Fully extend lower drawer. Air filter is located on lower left wall of cabinet.
2. Remove old filter and replace with a new PureAdvantageTM air filter.
Remove
and
Replace
Troubleshooting 11
Before You Call for Service
If Service is Required
If the appliance appears to be malfunctioning, read
through this manual first. If the problem persists,
check the Troubleshooting Guide below. Locate
the problem in the guide and refer to the cause and
its remedy before calling for service. The problem
may be something very simple that can be solved
without a service call. Some remedies listed in the
Troubleshooting Guide are very complex. Consulting
or contracting a qualified service technician may be
necessary.
Contact the dealer where you purchased the
appliance if service is required. State the model and
serial number and explain the problem. The model and
serial number plate is located on the ceiling of your
appliance.
If you do not know the name of the selling dealer or a
local service company, you can check online at www.
electroluxicon.com, or call 1-877-435-3287.
warning
ELECTROCUTION HAZARD
NEVER attempt to repair or perform maintenance on the unit until the main electrical power has been
disconnected.
Problem
Appliance not cold
Possible Cause
• Control set too warm
enough
• Airflow to front grille blocked
• Door gasket not sealing
properly.
Remedy
• Adjust temperature colder. See “Adjusting the
Temperature” in the “Start-Up and Temperature Control”
section. Allow 24 hours for temperature to stabilize.
• Airflow must not be obstructed to front grille. See
“Installation” Section.
• Adjust door gasket.
Appliance too cold
• Control set too cold
• Adjust temperature warmer. See “Adjusting the
Temperature” in the “Start-Up and Temperature Control”
section. Allow 24 hours for temperature to stabilize.
No interior light
• Failed LED assembly
• Contact a qualified Electrolux Service Technician.
Light will not go out • Door switch not making
when door is closed
contact
• Check for proper door alignment.
26
12 Warranty Information
Warranty
REFRIGERATOR WARRANTY Your refrigerator is protected by this warranty
WARRANTY
PERIOD
THROUGH OUR AUTHORIZED SERVICERS,
WE WILL:
THE CONSUMER WILL BE
RESPONSIBLE FOR:
FULL ONEYEAR
WARRANTY
One year from
original
purchase date.
Pay all costs for repairing or replacing any parts of
this appliance which prove to be defective in
materials or workmanship. Excludes original and
replacement Ice & Water filter cartridges (if
equipped). Original and replacement cartridges are
warranted for 30 days (parts only).
Costs of service calls that are listed under
NORMAL RESPONSIBILITIES OF THE
CONSUMER.*
LIMITED 2 nd– 5 TH
YEAR
WARRANTY
(Cabinet Liner
and Sealed
System)
Second through
fifth years from
original
purchase date.
Repair or replace any parts in the cabinet liner or
sealed refrigeration system (compressor,
condenser, evaporator, dryer or tubing) which
prove to be defective in materials or workmanship.
Costs for pickup and delivery of the
appliance required because of service.
Costs for labor, parts and transportation
other than with respect to the cabinet liner
or Sealed Refrigeration System.
LIMITED
WARRANTY
(Applicable to
the State of
Alaska)
Time periods
listed above.
All of the provisions of the full warranties above
and the exclusions listed below apply.
Costs of the technician's travel to the
home and any costs for pick up and
delivery of the appliance required because
of service.
In the U.S.A., your appliance is warranted by Electrolux Home Products, Inc. We authorize no person to change or add to
any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by
us or an authorized Electrolux Home Products, Inc. servicer. In Canada, your appliance is warranted by Electrolux
Canada Corp.
*NORMAL
RESPONSIBILITI
ES OF THE
CUSTOMER
This warranty applies only to products in ordinary household use, and the consumer is
responsible for the items listed below:
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the
appliance and in accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses,
repair of loose connections or defects in house wiring.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,
shelves, etc., which are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND
INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY
IMPLIED WARRANTY.
Note: Some states do not allow the exclusion or limitation of incidental or consequential
damages, so this limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or for
appliances not in ordinary household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by servicers other than Electrolux Home Products, Inc.,
Electrolux Canada Corp., or its authorized servicers; use of parts other than genuine Electrolux
Home Products parts; obtained from persons other than such servicers; or external causes such
as abuse, misuse, inadequate power supply or acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be readily
determined.
IF YOU NEED
SERVICE
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill
establishes the warranty period should service be required. If service is performed, it is in your best
interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may
also have other rights that vary from state to state. Service under this warranty must be obtained by
contacting Electrolux Home Products, Inc. or Electrolux Canada Corp.
This warranty only applies in the 50 States of the U.S.A. and Puerto Rico, and Canada. Product features or specifications
as described or illustrated are subject to change without notice. All warranties are made by Electrolux Home Products,
Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.
USA
877-435-3287
Electrolux Home Products, Inc.
P.O. Box 212378
Augusta, GA 30917
Canada
866-213-9397
Electrolux Canada Corp.
6150 McLaughlin Road
Mississauga, Ontario
L5R 4C2