Data sheet QT-FC 1x55/230

product details
QT-FC 1x55/230-240 S
Product description:
Product code:
Quantity:
QT-FC 1x55/230-240 S
4050300526096
Unpacked (UNV) contains 1 Piece (PCE)
You can find this product in the eCatalog:
http://catalog.myosram.com?~language=EN&~country=COM&it_p=4050300526096
Applications
Suitable f. fixtures with prot. class
class I and class II
Dimmable
No
Certificates & Standards
Approval marks - approval
ENEC 10 | VDE | VDE-EMC
EEI - Energy Label
A2
Standards
acc. to EN 61347-2-3 | acc. to EN 60929 | acc. to EN 55015:2006 + A1:2007 | acc.
to EN 61000-3-2 | acc. to EN 61547
General Description
Design / version
ECG standard
Logistical Data
Product weight
271.500 g
Relative humidity
5...85 % 1)
Temperature range at storage
-40...85 °C
Technical - Electrical Data
Inrush current
28 A
Nominal voltage
230-240 V
Mains frequency
50 Hz
DC voltage
154...276 V
Operating frequency
40...50 kHz
Dielectric strength
300 V | 320 V | 350 V 2)
Max. no. of ECGs on circuit breaker 10 A
8
Max. no. of ECGs on circuit breaker 16 A
13
TH full width at half maximum
230 µs
Technical - Geometries
Cable cross-section, input side
0.5...1.5 mm²
Length
123.00 mm
Width
79.00 mm
Height
33.00 mm
Mounting hole spacing, length
129.5 mm
Mounting hole spacing, width
67 mm
Wire preparation length, input side
8.5...9.5 mm
Wire preparation length, output side
8.5...9.5 mm
Technical - Light Technical Data
Rated starting time
warm start
Technical - Temperatures
Ambient temperature range
-20...+50 °C
Operating temperature
70 °C
Max. casing temp. in case of fault
110 °C
01.04.2011
Subject to change without notice. Errors and omission excepted.
© 2011 OSRAM GmbH
Page 1 of 3
product details
QT-FC 1x55/230-240 S
Packaging units
Product code
Packaging type and content
Dimensions in h x w x l
Gross weight
Volume
4050300526096
Unpacked contains 1 Piece
79,000 mm x 33,000 mm x 123,000 mm
218,571 g (0,000 g)
0,326 Cubic
dec.
4050300526102
Shipping carton box contains 20 Piece
275,000 mm x 95,000 mm x 425,000 mm
4.771,857 g (0,000 g)
11,103 Cubic
dec.
General
• For ECGs for operating FC 22 W and 40 W see QUICKTRONIC PROFESSIONAL QTP-M, -D/E, -T/E for CFL OSRAM DULUX D/E, T/E
• Supply voltage: 230 - 240 V
• Line frequency: 0, 50 - 60 Hz
• Line voltage: 198 - 254 V
• Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
• Same luminous flux with direct and alternating current
• The battery voltage may drop to 176 V. Ignition must take place above 198 V
• Lamp start: Start within 1.5 s with optimum filament preheating
• Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
• Automatic restart of replacement lamps
• Energy Efficiency Index EEI=A2
• Approval marks: VDE Sign EMV Sign
• Additional features: Cut off Sign EoL
• Safety: to EN 61347-2-3
• Lamp operation: to EN 60929
• RI suppression: to EN 55015:2006+A1:2007/CISPR 15
• Line harmonics: to EN 61000-3-2
• Immunity: to EN 61547
1)
Maximum 56 days/year at 85 %
2)
Permanent | 48 h | 2 h
01.04.2011
Subject to change without notice. Errors and omission excepted.
© 2011 OSRAM GmbH
Page 2 of 3
product details
QT-FC 1x55/230-240 S
Lampenverdrahtung / Lamp wiring:
Max. zulässige Leitungslänge zwischen EVG und Lampe: 2,0 m (PIN 1;2); 1,0 m
(PIN 3;4)
Max. permitted cable length in between ECG and lamp: 2.0 m (PIN 1;2); 1.0 m (PIN
3;4)
01.04.2011
Subject to change without notice. Errors and omission excepted.
© 2011 OSRAM GmbH
Page 3 of 3