SPECIFICATIONS SM109z
FEATURES
• Compact 2-way, 10-in stage monitor/PA
• Dual purpose loudspeaker: stage monitor and PA
• Rubber feet included for floor use plus a pole mount cup
for stand mounting
• Passive crossover and EQ for economical single
amplifier operation
• Dual Neutrik NL4 connectors for input and loop
through connection
• Integral handle strategically placed for easy transport
DESCRIPTION
The SM109z is a compact, professional loudspeaker configured
for dual-purpose stage monitor and PA use. It is designed for
applications with limited space requiring high quality monitoring. The enclosure is fitted with a pole cup for upright use,
increasing the SM109z’s usefulness as a main PA loudspeaker.
The conical HF waveguide provides wide-angle projection,
important in smaller venues where a single monitor must
often cover several performers. As a PA loudspeaker, this same
pattern is ideal for meetings and presentations. Portable
usage is enhanced by the heavy-duty enclosure construction,
steel grille, and integral handle. Two Neutrik NL4 jacks provide
reliable input and loop through connections. The SM109z carries a six year warranty.
APPLICATION
Applications Include:
• Houses of worship
• TV studios
• Meeting rooms
• Club Bands
• Theatres
• Classrooms
PERFORMANCE
Frequency Response (1 W @ 1m)
±3 dB 100 Hz to 19 kHz
-10 dB 80 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Full Range 95
Impedance (Ohms)
Full Range 8
Power Handling (Watts)
Full Range 300
Recommended High-Pass Frequency
(24 dB/octave) 70 Hz
Calculated Maximum Output (dB SPL)
Full Range Peak 126
Full Range Long Term 120
Nominal Coverage Angle / -6 dB points (degrees)
Conical 100
PHYSICAL
Part Number 0001307
Configuration 2-way, full-range floor monitor
LF Subsystem 1x 10-in, vented
HF Subsystem 1-in exit/1.4-in voice coil
compression driver on Wave
Guide Plate™
Powering Mode Passive LF/HF crossover
Enclosure Materials Exterior grade Baltic birch plywood
Finish Wear resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Mounting Hardware Pole mount cup
Grille Powder coated perforated steel
Dimensions
inches
millimeters
Height 14.88
378
Height w/feet 15.5
394
Width 12.25
311
Depth 18.00
457
Floor Angle 37°
Weights
pounds
kilograms
Net Weight 30
13.7
Shipping Weight 33
15.0
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
SM109z/0004644/001/2 pp
info@eaw.com
September 2002
www.eaw.com
Printed in USA
SPECIFICATIONS SM109z
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
The 2-way full-range loudspeaker system shall incorporate a 10-in
LF transducer and a 1.4-in voice coil compression driver.
NOTES:
1. SYMBOL INDICATES FEET.
2. SYMBOL INDICATES CENTER OF BALANCE.
3. WEIGHT APPROX. 27 LBS.
4. SHIPPING WEIGHT APPROX. 32 LBS.
5. HEIGHT OF FEET APPROX. .4"
7.43
1.32
2X 7.56
4.31
2X 9.64
1.73
C
L
9.25
12.25
C
L
VIEW A-A
3.94
R 3.44
TOP HAT
The LF transducer shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF transducer shall be
loaded on a axis-symmetrical, 1-in exit Wave Guide Plate™ with a
nominal conical beamwidth of 100°. An internal passive filter network shall provide all acoustical crossover and system equalization
requirements.
2X INPUT CONNECTOR
2X 20.15
C
L 6.44
19.75
CL
9.25
HANDLE
3.75
A
RIGHT SIDE
GRILLE PARTIALLY SHOWN
2X 4.00 T.S.C
10.53
LEFT SIDE
0001243(A) 9/12/02
A
System frequency response shall vary no more than ±3 dB from
100 Hz to 19 kHz measured on axis. The loudspeaker shall produce
a sound pressure level (SPL) of 95 dB SPL on axis at 1 meter with
a power input of 1 watt, and shall be capable of producing a peak
output of 126 dB SPL on axis at 1 meter. The loudspeaker shall
handle 300 watts of amplifier power (continuous) and shall have
a nominal impedance of 8 ohms.
S/N
The loudspeaker enclosure shall be irregularly trapezoidal in shape
and shall have rubber footpads on one side. Its baffle shall be
angled up 37°. It shall be constructed of exterior grade Baltic
birch plywood and shall employ extensive internal bracing. It shall
be finished in wear-resistant textured black paint. Input connectors shall be 2x Neutrik NL4 Speakon wired in parallel. It shall
include a pole mount cup and handle integral to the enclosure.
The front of the loudspeaker shall be covered with powder coated
perforated steel grille.
PIN 1--...-- PIN 1+...+
The 2-way full-range loudspeaker shall be the EAW model SM109z.
Manufacturing tolerances are +/- 0.13 and +/- 1°
INPUT
SM109z
WHITINSVILLE, MA USA
NEUTRIK
NL 4 MPR
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
SM109z/0004644/001/2 pp
info@eaw.com
September 2002
www.eaw.com
Printed in USA