Automation & Sensing
OI Touchscreens
Selection Guide............................................. 58
PLCs
MicroSmart Family........................................ 59
MicroSmart Pentra CPU Part Numbers........... 66
MicroSmart CPU Part Numbers..................... 67
Digital I/O Expansion Modules...................... 69
Analog I/O Expansion Modules..................... 72
Communication Modules.............................. 75
Accessories................................................. 80
Automation Organizer Suite.......................... 82
Specifications.............................................. 83
Dimensions................................................ 107
Automation Software
IDEC SmartRelay......................................... 110
Part Numbers............................................. 112
WindLGC Software.................................... 114
Specifications............................................ 115
Dimensions................................................ 120
Power Supplies
PLCs
Sensors
Communication
www.IDEC.com/plc
Barriers
Table of Contents
LED Machine Lighting - Pg. 1
Automation & Sensing - Pg. 27
Safety - Pg. 255
Switching & Controls - Pg. 449
Index - Pg. 933
Programmable Logic Controllers
Selection Guide
Selection Guide
OI Touchscreens
Selection Guide
Programmable Logic Controllers
MicroSmart Family
Series
MicroSmart Pentra
MicroSmart
59
67
OpenNet Controller (ONC)
SmartRelay
PLCs
Appearance
Automation Software
Page Number
Rated Voltage
12 VDC, 24 VDC, 100-240 VAC
24 VDC, 100-240 VAC
24 VDC
Max. Digital I/O
512
264
480
40
42
10
CPU base module only
12 I/O
32K bytes
2K bytes
Max. Analog I/O
Base CPU I/O Configuration
Power Supplies
Max. Communication Ports
56
56
Slim style: 12 I/Os with
Ethernet, 16, 32 I/Os
Slim style: 20, 40 I/Os
Brick style: 10, 16, 24 I/Os
Brick style: 10, 16, 24 I/Os
128K bytes
31.2K bytes
7
2
3
1
Embedded Ethernet
Yes
–
–
–
Modbus TCP
Yes
–
–
–
Web Server
Yes
–
–
–
Email and Text Message
Yes
–
–
–
User Web Page
Yes
–
–
–
USB Maintenance Port
Networking
Sensors
110
12-24 VDC, 24 VAC/DC, 100-240
VAC/DC
Maximum Program Capacity
Yes
–
–
–
Modbus TCP,
RTU, ASCII
Yes
–
–
–
AS-interface
Yes
Yes
–
Yes
–
–
Yes
–
Interbus
32-bit Data & Floating Pt. Math
High Speed I/O Freq.
Communication
Visit www.IDEC.com/PLC
Yes
–
–
–
100 kHz
20 kHz
10 kHz
2 kHz
Approvals
FM
Barriers
APPROVED
58 www.IDEC.com
Programmable Logic Controllers
MicroSmart Pentra Series
OI Touchscreens
PLCs
MicroSmart Pentra Series
Safety
Maximize efficiency and cut development time! MicroSmart Pentra PLCs combine advanced networking capabilities with unparalleled power, performance
and connectivity. Designed to meet all your communication requirements, now
and in the future, MicroSmart Pentra PLCs give you the flexibility to expand your
system with as many as fifteen modules! Our new Embedded Ethernet PLC with
built-in Modbus TCP also lets you remotely monitor status in real-time, receive
email alerts and customize your own web page.
All MicroSmart Pentra PLCs meet the highest standards for safety including:
cULus listed for Class 1 Division 2 hazardous locations*, CE compliant, as well
as certified for marine use by ABS, DNV, and Lloyd’s Registry*.
*Not applicable for all models. Visit www.IDEC.com/approvals for details.
Power Supplies
Power, Performance, Connectivity
Automation Software
The Power to Control.
Anywhere. Anytime.
The MicroSmart Pentra PLC Family: Everything you need in a controller
Email and text notifications
Modbus TCP, RTU and ASCII
USB programming port
Seven communication ports
NEW Advanced PID control modules
User web page
NEW 4-pt. analog output module
Sensors
Embedded Ethernet Port
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
59
Programmable Logic Controllers
MicroSmart Pentra Performance
Embedded Ethernet Port
Remote Access and Control
The new MicroSmart Pentra PLC with an embedded
Ethernet port, you can configure the MicroSmart
Pentra PLC for remote monitoring and control. Using
WindLDR software, you can remotely monitor or
update the PLC programs without having to be near
the PLC.
PLCs
OI Touchscreens
MicroSmart Pentra Series
Web Server Functions
Using standard web browsers like Internet Explorer
or Firefox, you can remotely log-in and access web
pages that are stored directly on the MicroSmart
Pentra PLC. Up to 1 MB of memory is dedicated for
web page storage! Use the built-in web pages or
create your own using an HTML editor.
Automation Software
Internet
14 Simultaneous Connections
Sensors
Power Supplies
The new embedded Ethernet Pentra supports up to
14 simultaneous connections through its Ethernet
port. Through the Ethernet port, the embedded
Ethernet Pentra can be configured to communicate
to WindLDR for maintenance communications, to an
Operator Interface touchscreen, and to VFD using
Modbus TCP communications, all simultaneously.
Embedded USB Maintenance Port
The new MicroSmart Pentra PLC with an embedded Ethernet PLC port
also has an embedded mini-B USB port for maintenance.
Barriers
Communication
You can now easily connect your PC to this PLC using a standard
USB cable.
60 www.IDEC.com
Programmable Logic Controllers
MicroSmart Pentra Series
Modbus TCP, RTU and ASCII
OI Touchscreens
Web Browser - Remote
Monitor & Control
WindLDR Software
Monitor & Update Program
SCADA
Supervisory Controls
TCP
Modbus TCP
Server 255
Modbus TCP
Client
Ethernet
Modbus TCP
Server 3
Modbus TCP
Server 2
Pentra with
Radio Modem
OI
Touchscreen
PLCs
Modbus TCP
Server 1
VFD
Pentra
Pentra
OI
Touchscreen
Modbus RTU/ASCII
RS485
Automation Software
Temperature
Controller
Pentra with
Radio Modem
Using intuitive WindLDR software, you can configure the MicroSmart Pentra to be a Master or Slave device on a Modbus network. All MicroSmart Pentra
PLCs support Modbus RTU/ASCII protocols and our CPU with embedded Ethernet port also supports Modbus TCP protocol.
Power Supplies
Email and Text Message
SMS
Sensors
Internet
Communication
Easily configure the MicroSmart
Pentra PLCs to send out system status
and alarms to your email or mobile
phone. Data registers values in the
PLC can also be incorporated in the
body of the email. It also supports
email login authentication so third
party email server like Yahoo can be
used. Up to 255 email templates can
be configured with multiple recipients
can be included.
Barriers
800-262-IDEC (4332) • USA & Canada
61
Programmable Logic Controllers
MicroSmart Pentra Series
Power Supplies
Automation Software
PLCs
OI Touchscreens
User Web Pages
With IDEC MicroSmart Pentra, users do not need to know JAVA programming to embed dynamic values and parts on their PLC web pages. Even novice
HTML programmer can take full advantage of the integrated IDEC system library of numerical display/input, horizontal and vertical bar graphs, trend chart,
ON/OFF pilot lights and pushbuttons. Up to 1MB of memory is reserved for user web pages.
Integrated 100KHz Fast Inputs and Outputs
Configure up to four high-speed inputs from high-speed output devices such as rotary encoders or proximity switches at a maximum frequency of 100KHz, independent of the scan time. Up to three high-speed outputs can be used for simple positioning controls for stepper or servo motors.
Sensors
HSC1: 930
V out
Barriers
Communication
1 PULSE
62 www.IDEC.com
Programmable Logic Controllers
MicroSmart Pentra Series
Maximum 7 Communication Ports
Port 6
RS232C/
RS485
Port 1
RS232C
VFD
Automation Software
Port 5
RS232C/RS485
PLCs
With MicroSmart Pentra PLCs, you don’t
have to worry about limited communication
capabilities. It doesn’t matter if you’re just
starting out or a current user expanding your
MicroSmart Pentra PLC, you can rest assured
that these communication modules will
provide reliable and seamless communication. If RS485 modules are used for all six
ports, up to 186 RS485 slave devices can be
connected with as high as a 115K baud rate
available for fast transmission.
Port 2
RS232C/RS485
Port 3
RS232C/RS485
OI Touchscreens
Port 4
RS232C/RS485
Port 7
RS232C/RS485
Temperature Controller
Power Supplies
Sensors
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
63
Programmable Logic Controllers
OI Touchscreens
MicroSmart Pentra Series
Choose a CPU for every application
With three controller types to choose from, MicroSmart Pentra PLCs offer the features you need for your applications. Built to allow you the flexibility to expand when
you need to, MicroSmart Pentra PLCs are the best way to get everything you need in just one controller.
Potentiometer
PLCs
Power, Status, I/O
LED Indicators
Removable Terminal
Block
Automation Software
Optional HMI module
Optional Clock
Cartridge
USB mini-B
Programming Port
Optional HMI base module
Optional EEPROM
cartridge (up to 128KB)
• Optional RS232C adaptor
Power Supplies
0-10V DC Analog Input
(8-bit resolution)
(8-pin mini DIN connector)
• Optional RS485 adaptor
(8-pin mini DIN or screw
terminal connector)
RJ-45 Ethernet Port
• Optional RS232C module
Power Terminal
• Optional RS485 module
Sensors
(mini-DIN or screw terminal type)
Slim CPU with Ethernet Port
Communication
The perfect design when you need Ethernet capability, this slim CPU with embedded
Ethernet port is available with 24V DC power and equipped with eight DC inputs and
four transistor outputs (sink or source). Up to seven functional modules, including
analog and communication modules can be mounted on the right-hand expansion
bus. Using an expansion interface module, an additional eight discrete expansion
modules can be mounted.
Barriers
Modules snap together easily without the need for additional tools.
64 www.IDEC.com
Programmable Logic Controllers
MicroSmart Pentra Series
OI Touchscreens
Potentiometer
0-10V DC Analog Input
(8-bit resolution)
Potentiometer (x2)
Optional HMI module
RS232C port
PLCs
RS232C port
Automation Software
Optional Clock
Cartridge
Optional EEPROM
cartridge
Power, Status, I/O
LED Indicators
Power Supplies
• Optional RS232C adaptor (8-pin mini DIN connector)
• Optional RS485 adaptor
(8-pin mini DIN or screw
terminal connector)
Screw Terminal or MIL
connector termination
Sensors
• Optional EEPROM cartridge
• Optional Clock Cartridge
All-in-One CPU
If you don’t need Ethernet, but still want a high-performance CPU, the MicroSmart Pentra slim CPU is your best choice! Available with 24V DC power,
this controller has all the functionalities you need in 16 and 32 I/O configurations. Each 16 I/O CPU is equipped with eight DC inputs, two transistor outputs
(sink or source) and six relay outputs, while the 32 I/O CPU is equipped with 16
DC inputs and 16 transistor outputs (sink or source).
Available with 12V DC, 24V DC and 100-240V AC power, you can choose from
10, 16 and 24 I/O configurations. The 10 I/O CPU is equipped with six DC inputs
and four relay outputs, while the 16 I/O CPU is equipped with nine DC inputs and
seven relay outputs. The 24 I/O CPU is equipped with 14 DC inputs and ten relay
outputs. The 24 I/O CPU (24V DC and 100-240V AC models) can also be expanded
with a maximum of four functional or discreet expansion modules.
Communication
Slim CPU
Barriers
800-262-IDEC (4332) • USA & Canada
65
Programmable Logic Controllers
OI Touchscreens
MicroSmart Pentra Series
MicroSmart Pentra CPU Part Numbers
Slim Base Module with Embedded Ethernet
Style
Part Number
Embedded I/Os
Operating Voltage
Ethernet & USB
Port
FC5A-D12K1E
Output
Maximum No. of
Expansion Modules
Transistor Sink
12 (8in/4out)
24V DC
15 (Maximum 492
digital I/Os)
Yes
Transistor Source
PLCs
FC5A-D12S1E
Slim Base Module
Automation Software
Style
Part Number
Operating Voltage
Ethernet & USB Port
Output
6 Relays, 2 Trans.
Sink
FC5A-D16RK1
15 (Maximum 496
digital I/Os)
16 (8in/8out)
6 Relays, 2 Trans.
Source
FC5A-D16RS1
24V DC
—
FC5A-D32K3
Power Supplies
Maximum No. of
Expansion Modules
Transistor Sink
15 (Maximum 512
digital I/Os)
32 (16in/16out)
FC5A-D32S3
Transistor Source
All-in-One Base Module
Sensors
Style
Part Number
Operating Voltage
FC5A-C10R2
120-240V AC
FC5A-C10R2C
10 (6in/4out)
Ethernet & USB Port
Output
Maximum No. of
Expansion Modules
24V DC
FC5A-C10R2D
12V DC
FC5A-C16R2
120-240V AC
Communication
—
Barriers
FC5A-C16R2C
24V DC
FC5A-C16R2D
12V DC
FC5A-C24R2
120-240V AC
FC5A-C24R2C
FC5A-C24R2D
66 16 (9in/7out)
24 (14in/10out)
24V DC
12V DC
www.IDEC.com
—
Relay
4 (Maximum 88
digital I/Os)
—
Programmable Logic Controllers
MicroSmart Series
OI Touchscreens
MicroSmart Performance
MicroSmart Series
Key features:
PLCs
• Available in 10, 16, 20, 24, and 40 I/O CPUs.
• PID Controls
-Program up to 14 PID loops
• High Speed I/O
-Built-in 4 high speed inputs
-Single or Dual Phase
-Max. 20KHz frequency
• Built-in 2 High speed outputs (Slim model only)
• Configure up to 264 I/O Points
• Data link up to 32 MicroSmart and Pentra CPUs
• Using RS485 communication module/port, you can create a network
of up to 32 CPUs.
• Worldwide Approvals
-cULus listed, CE marked
-Class 1 Div. 2 for hazardous locations
-Lloyds Registered and ABS approved for shipping industry
Automation Software
MicroSmart CPU Part Numbers
All-in-One
Part Number
Power
FC4A-C10R2C
24V DC
I/O Points
Input
Output
Maximum No.
of Expansion
Modules
Power Supplies
Style
10 (6 in/ 4 out)
FC4A-C10R2
100-240V AC
FC4A-C16R2C
24V DC
16 (9 in/ 7 out)
100-240V AC
FC4A-C24R2C
24V DC
  24 (14 in/ 10 out)
24V DC (Sink/Source)
Relay
Communication
FC4A-C16R2
FC4A-C24R2
Sensors
—
4 (Maximum 88
digital I/Os)
100-240V AC
Barriers
800-262-IDEC (4332) • USA & Canada
67
Programmable Logic Controllers
OI Touchscreens
MicroSmart Series
MicroSmart CPU Part Numbers
Slim
Style
Part Number
Power
I/O Points
Input
Output
Maximum No. of
Expansion Modules
6 Relays, 2 Transistor
Sink
PLCs
FC4A-D20RK1
7 (Maximum 244
digital I/Os)
6 Relays, 2 Transistor
Source
Automation Software
FC4A-D20RS1
20 (12 in/8 out)
Power Supplies
FC4A-D20K3
Transistor Sink
24V DC
7 (Maximum 148
digital I/Os)
24V DC (Sink/Source)
Transistor Source
FC4A-D40K3
Transistor Sink
Sensors
FC4A-D20S3
7 (Maximum 264
digital I/Os)
Communication
40 (24 in/16 out)
FC4A-D40S3
Transistor Source
Barriers
68 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Digital I/O Expansion Modules
MicroSmart Family
Key features:
• 15 modules to choose from
• Available with Screw or MIL connectors
• Easy snap-on
• Available 8, 16 or 32 point modules
• Up to 512 I/O can be configured in the Pentra and 264 I/O in the
MicroSmart system
Input Modules
Part Number
FC4A-N08A11
Input
Input Points
PLCs
Style
Terminal
100-120V AC
Automation Software
8
Removable Screw Terminals
FC4A-N08B1
Power Supplies
FC4A-N16B1
Sensors
24V DC
16
Communication
FC4A-N16B3
MIL Connector (ribbon cable)
FC4A-N32B3
32
Barriers
800-262-IDEC (4332) • USA & Canada
69
Programmable Logic Controllers
OI Touchscreens
MicroSmart Family
Digital I/O Expansion Modules
Output Modules
Style
Part Number
Output
Output Points
8
PLCs
FC4A-R081
Terminal
FC4A-R161
16
FC4A-T08K1
8
Removable Screw Terminals
Power Supplies
Automation Software
Relay
Transistor Sink
16
Sensors
FC4A-T16K3
MIL Connector (ribbon cable)
32
Barriers
Communication
FC4A-T32K3
70 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Digital I/O Expansion Modules
Output Modules (cont.)
Style
Part Number
Output
Output Points
FC4A-T08S1
Terminal
8
Removable Screw Terminals
PLCs
Transistor Source
Automation Software
FC4A-T16S3
16
MIL Connector (ribbon cable)
32
Power Supplies
FC4A-T32S3
Combination I/O Modules
Style
Part Number
Input
Output
I/O Points
24V DC (Sink/Source)
8 (4 in/4 out)
Removable Screw Terminals
24 (16 in/ 8 out)
Wire Spring Clamp
Sensors
FC4A-M08BR1
Terminal
Relay
Communication
FC4A-M24BR2
Barriers
800-262-IDEC (4332) • USA & Canada
71
Programmable Logic Controllers
PLCs
OI Touchscreens
MicroSmart Family
Analog I/O Expansion Modules
Key features:
• 9 different modules to choose from
• 0-10V, 4-20mA, RTD, Thermocouple, Thermistor inputs, 0-10V DC or
-10V DC to 10V DC output
• 12 or 16-bit resolution
• Fast conversion time
• Maximum of 56 I/O can be configured in the MicroSmart Pentra
system
• Easy to configure using a Macro instruction in WindLDR
Modules
Part Number
I/O Points
FC4A-J8C1
8 (8 inputs)
FC4A-L03A1
3 (2 inputs, 1 output)
Input
0-10V DC, 4-20mA
Output
Resolution
–
16-bit (0-50000)
Terminal
0-10V DC, 4-20mA
Power Supplies
Automation Software
Style
12-bit (0-4095)
Removable Screw
Terminals
2 (2 inputs)
–
FC4A-J4CN1
4 (4 inputs)
0-10V DC, 4-20mA, RTD,
Thermocouple
–
16-bit (0-50000)
FC4A-L03AP1
3 (2 inputs, 1 output)
RTD, Thermocouple
0-10V DC, 4-20mA
12-bit (0-4095)
Barriers
Communication
Sensors
FC4A-J2A1
72 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Analog I/O Expansion Modules
Modules (cont.)
Style
I/O Points
Input
Output
Resolution
FC4A-J8AT1
8 (8 inputs)
Thermistor (NTC/PTC)
–
12-bit (0-4000)
FC4A-K2C1
2 (2 outputs)
–
-10 to 10V DC, 4-20mA
16-bit (0-50000)
FC4A-K1A1
1 (1 output)
–
0-10V DC, 4-20mA
12-bit (0-4095)
Terminal
PLCs
Part Number
Automation Software
Power Supplies
FC41-K4A1
Removable Screw
Terminals
4 (4 outputs)
Communication Modules
Web Server Module
Features:
Sensors
• Easy to configure
• Comes with interface cable and Quick Start Guide
Part Numbers
Style
Description
FC4A-ENET
Web Server Module
(includes cable and Quick
Start Guide)
Style
Part Number
Description
FC9Y-QS100-0
Quick Start Guide
Communication
Part Number
Quick Start Guide
Web Server Module for MicroSmart PLC
Barriers
800-262-IDEC (4332) • USA & Canada
73
Programmable Logic Controllers
Advanced PID for precision control
PID (Proportional Integral Derivative) is the most commonly used
feedback control loop in industrial control systems. PID calculates
an error value as the difference between a measured process variable and a desired set point. The controller then attempts to minimize the error by adjusting the process control. With MicroSmart
Pentra PLCs, PID implementation can be deployed in two ways:
integrated PID controls or a dedicated Process Control module,
which can be mounted on the MicroSmart Pentra expansion bus.
Automation Software
PLCs
OI Touchscreens
MicroSmart Family
P
Setpoint
+
Error
K p e(t)
I
Process
Output
–
Kd
de(t)
dt
Advanced PID Control Module
Advanced PID Control Module Part Numbers
A dedicated PID Control module is available for extreme stability and complex applications. This particular module has more
functionalities than you will find in any other controller on the
market. Independent of CPU scan time, the PID Control module
does the work, reducing PLC scan time without taking up PLC
memory space.
Style
Part Number
Description
FC5A-F2M2
PID Control Module with 2x analog
inputs and 2x 4-20mA/non-contact
voltage for SSR drive
Sensors
Power Supplies
D
FC5A-F2MR2
PID Controls Module with 2x analog
inputs and 2x Relay Outputs
PID Control Module Highlights:
Communication
• Precise, stable and accurate PID control with less than a 0.2% error
• Available in two models:
– Built-in 2 analog inputs, 2 x 4-20mA/
non-contact voltage for SSR drive
– Built-in 2 analog inputs, 2 x relay outputs
• Each input individually configured to accept different
signal types
Barriers
• Up to seven modules can be mounted on the MicroSmart
Pentra
• Maximum 14 PID loops with auto-tuning
74 www.IDEC.com
• 14-bit resolution
• ARW (anti-reset windup)
• Accepts many different input types including:
– Type K, J, R, S, B, E, T, C, PL-II and N thermocouples
– RTD
– 0-20 mA and 4-20 mA
– 0-1V, 0-5V, 1-5V, and 0-10V DC
• Numerous control methods including:
– Cascade
– External set point
– Heating and cooling control action
– Difference input control
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Communication Modules
AS-Interface Module
PLCs
Automation Software
AS-Interface Master Module
Style
Part Number
Description
FC4A-AS62M
MicroSmart AS-Interface Master Module
IDEC offers a plug-in AS-Interface master module (as well as other AS-Interface
devices, please see AS-Interface Communication section) that is easy to configure; it can also connect up to 62 slaves. With this technology, you’ll reduce the
amount of engineering needed, simplify wiring and enhance your operations;
requiring less maintenance. With an average cost of savings of 15 to 40%
compared with traditional cabling methods, using an IDEC AS-Interface module
is the easy choice.
Sensors
Master-Slave Principle
Power Supplies
The Actuator Sensor-interface (AS-Interface) is the simplest and most costeffective of the PLC-based , industrial-networking protocols. AS-Interface is a
truly open, low-cost electromechanical connection system designed to operate
over a two-wire cable carrying data and power over a distance of up to 100m. It
is especially suitable for lower levels of plant automation where simple - often
binary (On/Off) - field devices such as switches, sensors, and actuators need to
interoperate in a local area automation network controlled by a PLC. IDEC supports this open technology.
range. A/B slaves have an address of 1A through 31A in the standard address
range or 1B through 31B in the expanded address range. Among the A/B slaves,
slaves with an address of
Various types of slave devices can be connected to the AS-Interface bus, including sensors, actuators, and remote I/O devices. Analog slaves can also be connected to process analog data. Slaves are available in standard slaves and A/B
slaves. Standard slaves have an address of 1 through 31 in the standard address
1A through 31A are called A slaves, and slaves with an address of 1B through
31B are called B slaves. (see AS-Interface Communication section for more
details)
Communication
The AS-Interface master controls and monitors the status of slave devices connected to the AS-Interface bus. Normally, the AS-Interface master is connected
to a PLC (sometimes called ‘host’) or a gateway.
Controller
Master
Master call B-Slaves
Master call A-Slaves
Slave 2A
Slave 31A
Slave 1B
Slave 1A
Slave 2A
Slave 31A
Slave 1B
Slave answer A-Slaves
Slave 2B
Barriers
Slave 1A
Slave 2B
Slave answer B-Slaves
800-262-IDEC (4332) • USA & Canada
75
Programmable Logic Controllers
MicroSmart Family
PLCs
OI Touchscreens
Communication Module
Style
Part Number
Description
FC5A-SIF4
RS485 Communication
Module for MicroSmart
Pentra configure as port
3 to 7
FC5A-SIF2
RS232 Communication
Module for MicroSmart
Pentra configure as port
3 to 7
Communicate with up to seven different serial devices
Only IDEC offers communication modules that enable you to configure up to seven serial devices! Now you can connect your operator interface, PC, barcode reader,
RFID equipment, printer and more. Just imagine the possibilities.
Barriers
Communication
Sensors
Power Supplies
Automation Software
Using the MicroSmart Pentra slim CPU,you can configure up to seven communication ports. Using the All-in-one MicroSmart Pentra you can communicate with up
to five serial devices.
76 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
Style
Part Number
Description
Usage
FC4A-PH1
HMI Module
For displaying and changing operands
FC4A-PM32
EEPROM memory
cartridge
32KB EEPROM memory cartridge
FC4A-PM64
EEPROM memory
cartridge
64KB EEPROM memory cartridge
FC4A-PM128
EEPROM memory
cartridge
128KB EEPROM memory cartridge
Clock cartridge
Real-time clock cartridge
Power Supplies
For mounting HMI module and communication ports with slim model CPU module
(HMI module is not included)
Automation Software
HMI Base Module
PLCs
FC4A-HPH1
FC4A-PT1
OI Touchscreens
Optional Modules
Sensors
Communication Ports
Style
Part Number
Description
Terminal
Mini DIN
FC4A-PC2
RS485
Mini DIN
FC4A-PC3
RS485
Screw Terminal
800-262-IDEC (4332) • USA & Canada
Barriers
RS232C
Communication
FC4A-PC1
77
Programmable Logic Controllers
Communication Module — for Slim CPU
Style
Part Number
Description
Expansion Power Supply Module
Terminal
Style
Part Number
Description
FC4A-HPC1
RS232C
Mini DIN
FC5A-EXM1M
Master Expansion
Power Supply For
MicroSmart Pentra
FC4A-HPC2
RS485
Mini DIN
FC5A-EXM1S
Slave Expansion
Power Supply For
MicroSmart Pentra
FC4A-HPC3
RS485
Screw Terminal
FC5A-EXM2
Expansion Power
Supply For
MicroSmart Pentra
Power Supplies
Automation Software
PLCs
OI Touchscreens
MicroSmart Family
Expansion Power Supply System Configuration
FC5A-EXM2 (Expansion Interface Module)
FC5A-EXM2
Sensors
Slim CPU Module
FC5A-EXM1M and FC5A-EXM1S (Expansion Interface Master & Salve Modules)
Slim CPU Module
Communication
FC5A-EXM1M
FC5A-KX1C (Expansion Interface Cable)
1m
Barriers
FC5A-EXM1S
78 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
Cables
OI Touchscreens
Communication Cables
Part
Number
Appearance
FC4A-KC4CA
5ft. (1.53m)
FC2A-KM1C
FC2A-KP1C
USB to Serial
Converter
Web Server Module
interface cable
6ft. (1.83m)
USB programming
cable for embedded
Ethernet CPU
FC5A-KX1C
Length
9.84 Ft. (3m)
9.84 Ft. (3m)
3.28 Ft. (1m)
Expanded
Description
Modem cable. Used
to connect a modem
to the MicroSmart
RS232C port.
User communication cable. Used
to connect RS232C
equipment to the
MicroSmart RS232C
port.
MicroSmart Pentra
expansion power
supply interface
cable. Used to
connect expansion
interface master
and expansion slave
modules.
Power Supplies
0.33ft.
(100mm)
Part
Number
Automation Software
HG9Z-XCM2A
Programming cable
(Maintenance/User
Communication
Mode selectable)
6ft. (1.83m)
FC4A-KC3C
Appearance
PLCs
FC4A-USB
Expanded
Description
Length
MIL Connector Cables (use with Breakout Modules)
Use with
Part Number
Length
Use with
Part Number
FC9Z-H050B26
1.64ft. (0.5m)
FC9Z-H050B20
FC9Z-H100B26
3.28ft. (1m)
FC9Z-H100B20
FC9Z-H200B26
Non-shielded
Model
Length
1.64ft. (0.5m)
Non-shielded
3.28ft. (1m)
6.56ft (2m)
FC9Z-H200B20
FC9Z-H300B26
9.85ft. (3m)
FC9Z-H300B20
9.85ft. (3m)
FC9Z-H050A26
1.64ft. (0.5m)
FC9Z-H050A20
1.64ft. (0.5m)
FC9Z-H100A26
FC9Z-H200A26
3.28ft. (1m)
Shielded
6.56ft (2m)
FC9Z-H300A26
FC9Z-H100C26A
I/O Expansion
Modules (20-wire)
BX1D-S20A,
BX1D-T20A
9.85ft. (3m)
Shielded Single
Connectors
5ft. (1.5m)
FC9Z-H100A20
FC9Z-H200A20
Shielded
FC9Z-H300A20
FC9Z-H100C20A
6.56ft (2m)
Sensors
CPU Module
(26-wire)
BX1D-S26A,
BX1D-T26A
Model
3.28ft. (1m)
6.56ft (2m)
9.85ft. (3m)
Shielded Single
Connectors
5ft. (1.5m)
Communication
Breakout Modules
Part Number
Descrption
26-wire MIL connector
cable
BX1D-S26A
26-terminal breakout module
BX1D-T26A
26-terminal touch-down terminal breakout
module
BX1D-S20A
20-terminal breakout module
BX1D-T20A
20-terminal touch-down terminal breakout
module
20-wire MIL connector
cable
800-262-IDEC (4332) • USA & Canada
Barriers
Use with
79
Programmable Logic Controllers
OI Touchscreens
MicroSmart Family
Accessories
Part Number
Use with
FC4A-PMT13
FC5A-PMT13
CPU module
FC4A-PMTS16
16-position right-side terminal block for FC4A-D20RK1 and FC5A-D16RK1 CPU
11-position terminal block for 8-pt I/O expansion modules
PLCs
I/O expansion modules
10-position terminal block for 16-pt I/O expansion modules
FC4A-PMC20
20-position connector socket for MIL connector I/O expansion modules
FC4A-PMC26
26-position connector socket for MIL connector CPU modules
FC4A-PSP1
Direct mounting strips for mounting on a panel
FC4A-PMAC2
Analog voltage input cable for slim CPU
FC4A-DS824-SW14
14-pt input simulator switch for 24 I/O CPU
FC4A-DS824-SW9
9-pt input simulator switch for 16 I/O CPU
FC4A-DS824-SW6
6-pt input simulator switch for 10 I/O CPU
FC9Y-B812-0A
MicroSmart user manual
FC9Y-B1138-0
MicroSmart Pentra user manual
SW1A-WIC
Automation Organizer Software Suite
RV8H Series 6mm Interface Relays
Key FeaturesRV8H
• Space-saving 6mm width
• Only 70mm in height from DIN rail
• Gold-plated contacts
• Pre-assembled relay and DIN mount socket
• Universal screw terminals (flat and Phillips)
• Universal AC/DC socket with built-in surge suppression and green LED
• Lever for easy locking and removal of relay
• Wide input voltage range: 6 to 240V
• High dielectric strength and impulse withstand voltages
• Sensitive coil 170mW
• Reverse Polarity protected
• 400V AC maximum switching voltage
• 1500VA maximum switching power
• RoHS compliant
Sensors
Power Supplies
Automation Software
16-position right-side terminal block for FC4A-D20RS1 and FC5A-D16RS1 CPU
FC4A-PMT11
Part Numbers
Coil Voltage
Communication
13-position left-side terminal block for FC5A-D16RK1/-D16RS1 CPU
FC4A-PMTK16
FC4A-PMT10
DC
AC/DC
Barriers
Description
13-position left-side terminal block for FC4A-D20RK1/-D20RS1 CPU
Accessories
Part Number
6V
RV8H-L-D6
9V
RV8H-L-D9
12V
RV8H-L-D12
18V
RV8H-L-D18
24V
RV8H-L-D24
12V
RV8H-L-AD12
18V
RV8H-L-AD18
24V
RV8H-L-AD24
48V
RV8H-L-AD48
60V
RV8H-L-AD60
110V - 125V
RV8H-L-AD110
220V - 240V
RV8H-L-AD220
Item
Color
Part Number
Black
SV9Z-J20B
Gray
SV9Z-J20W
Blue
SV9Z-J20S
Spacer (circuit separator) 2
-
SV9Z-SAW
Marking plate (10 pcs)
-
SV9Z-PW10
Jumper (20 combs) 1
1. Jumper combs come with 20 points, if shorter lengths are needed simply cut off the excess points.
2. Width of spacer: 2mm
Note: When using a cut jumper, please use a spacer on the cut side. For additional information see instruction sheet.
Standard stock models in bold.
80 (when using combination of
RV1H relay and SV1H socket)
www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Starter Kits and Solution Packages
MicroSmart Starter Kits
Part Numbers
Controller
Power Supply
MM-SMART-10
10 I/O FC4A-C10R2 CPU
–
MM-SMART-16
16 I/O FC4A-C16R2 CPU
–
MM-SMART-20
20 I/O FC4A-D20RK1 CPU
15W
MM-SMART-24
24 I/O FC4A-C24R2 CPU
–
MM-SMART-40
40 I/O FC4A-D40K3 Slim CPU
15W
MM-PENTRA-16
16 I/Os FC5A-D16RS1 CPU
30W
MM-PENTRA-24
24 I/Os FC5A-C24R2 CPU
–
MM-PENTRA-12
12 I/Os FC5A-D12S1E Embedded Ethernet
30W
Software (Prog. Cables Included)
Automation Organizer Software Suite
PLCs
MicroSmart
Pentra
MicroSmart
Item
MicroSmart Solution Packages
Automation Software
KIT-PENTRA-12-HG3G-AHP shown
KIT-PENTRA-24-HG1F
4.6" HG1F Mono
24 I/O FC5A-C24R2C CPU
60W
KIT-PENTRA-12-HG1F
4.6" HG1F Mono
12 I/O FC5A-D12S1E Embedded Ethernet CPU
60W
KIT-PENTRA-24-HG2G-M
5.7" HG2G Color TFT LCD
24 I/O FC5A-C24R2C CPU
60W
KIT-PENTRA-12-HG2G-M
5.7" HG2G Color TFT LCD
12 I/O FC5A-D12S1E Embedded Ethernet CPU
60W
KIT-PENTRA-24-HG2G-TE
5.7" HG2G Color TFT LCD
24 I/O FC5A-C24R2C CPU
60W
KIT-PENTRA-12-HG2G-TE
5.7" HG2G Color TFT LCD
12 I/O FC5A-D12S1E Embedded Ethernet CPU
60W
KIT-PENTRA-24-HG2G-HP
5.7" HG2G Color TFT LCD
24 I/O FC5A-C24R2C CPU
60W
KIT-PENTRA-16-HG2G-HP
5.7" HG2G Color TFT LCD
16 I/O FC5A-D16RS1 CPU
60W
KIT-PENTRA-12-HG2G-HP
5.7" HG2G Color TFT LCD
12 I/O FC5A-D12S1E Embedded Ethernet CPU
60W
KIT-PENTRA-16-HG3G-8HP
8.4" HG3G Color TFT LCD
16 I/O FC5A-D16RS1 CPU
60W
KIT-PENTRA-12-HG3G-8HP
8.4" HG3G Color TFT LCD
12 I/O FC5A-D12S1E Embedded Ethernet CPU
60W
KIT-PENTRA-16-HG3G-AHP
10.4" HG3G Color TFT LCD
16 I/O FC5A-D16RS1 CPU
60W
KIT-PENTRA-12-HG3G-AHP
10.4" HG3G Color TFT LCD
12 I/O FC5A-D12S1E Embedded Ethernet CPU
60W
KIT-PENTRA-16-HG4G-HP
12.1" HG4G Color TFT LCD
16 I/O FC5A-D16RS1 CPU
60W
KIT-PENTRA-12-HG4G-HP
12.1" HG4G Color TFT LCD
12 I/O FC5A-D12S1E Embedded Ethernet CPU
60W
Software (Prog. Cables Included)
Automation Organizer Software Suite
Barriers
Power Supply
Communication
Controller
Sensors
Operator Interface
Power Supplies
Part Numbers
OI Touchscreens have black bezels. All packages come with Automation Organizer software suite and communication cables.
800-262-IDEC (4332) • USA & Canada
81
MicroSmart Family
Programmable Logic Controllers
OI Touchscreens
Automation Organizer Suite
Sensors
Power Supplies
Automation Software
PLCs
Programming Software
Automation Organizer (AO) is a powerful software suite containing PLC programming software (WindLDR), OI touchscreen configuration software (WindO/I-NV2) and
system configuration software (WindCFG). AO boasts a completely new graphic user interface and redesigned menu icons. AO is a one-stop automation software
package for IDEC MicroSmart Pentra PLCs and IDEC OI touchscreens, and is compatible with Windows XP, Vista (32 bit) and Windows 7 (32 and 64-bit).
All IDEC MicroSmart Pentra PLCs are programmable with WindLDR ladder
logic software. This icon-driven programming tool combines logic and intuition
with an incredibly easy-to-use interface to allow you to take advantage of
MicroSmart features. Even without ladder program experience, you can use the
built-in editors, shortcuts and debuggers to configure programs. WindLDR is an
excellent, long-term investment for your control solutions.
Communication
Simulation Mode
WindLDR allows you to simulate ladder programs with built-in Simulation mode.
You can easily test and verify functionality of your ladder program without actual
hardware.
Online Editing
Shutting down your PLC for minor changes can be a major hassle, so WindLDR
allows you to edit and download programs without interrupting PLC operation.
You can write new values to counters, timers and registers at any time without
switching between editor mode (for programming) and monitor mode.
Barriers
WindO/I-NV2 software is the programming tool available for all IDEC OI touchscreens. It is used to create projects or programs that can display information
from a PLC, process status, or can be used to input data with virtual switches or
keypads to make changes to a process. The objects are extremely easy to configure with the help of step- by-step navigation. It lets you quickly create colorful
graphical screens in no time using drop-down menus and intuitive drag and drop
functionality for the objects. A workspace is available to help you organize and
manage projects, objects and screens.
Firmware Download
With WindLDR version 6.4 or later, you have the option to upgrade or downgrade
your CPU system program. It’s as simple as clicking on the checkbox in the
Download dialog box. Now you can easily update your PLC system firmware
with the click of a button.
82 WindCFG is a system layout and configuration tool for IDEC PLCs and OI touchscreens. Using WindCFG, you can create a visual layout of the system design
and basic configuration of your PLC and OI touchscreens.
FREE Upgrades
The Automation Organizer suite comes with free lifetime upgrades. Once you
make the initial purchase, upgrades are absolutely free.
Part Number
Part Number
Description
SW1A-W1C
Automation Organizer software suite
www.IDEC.com
For more information,
see page 121.
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Specifications
Slim Type
Model
FC5A-D12K1E
FC5A-D12S1E
FC5A-D16RK1
FC5A-D16RS1
FC5A-D32K3
FC5A-D32S3
FC4A-D20K3
FC4A-D20S3
Rated Power Voltage
FC4A-D40K3
FC4A-D40S3
24V DC
Allowable Voltage Range
20.4 to 26.4V DC (including ripple)
Maximum Input Current
560 mA (26.4V DC)1
700 mA (26.4V DC)1
Maximum Power Consumption
19W (26.4V DC)1
700 mA (26.4V DC)1
14W (26.4V DC)1
Allowable Momentary
Power Interruption
17W (26.4V DC)1
10 ms (at 24V DC)
PLCs
Between power and terminals: 500V AC, 1 minute
Between I/O and terminals: 500V AC, 1 minute
Dielectric Strength
Between power and terminals: 10 MΩ minimum (500V DC megger)
Between I/O and terminals: 10 MΩ minimum (500V DC megger)
Insulation Resistance
DC power terminals: 1.0 kV, 50 ns to 1 µs
I/O terminals (coupling clamp): 1.5 kV, 50 ns to 1 µs
Noise Resistance
50A maximum (24V DC)
Power Supply Wire
Automation Software
Inrush Current
UL1015, AWG22, UL1007 AWG18
Operating Temperature
0 to 55°C
Storage Temperature
–25 to +70°C (no freezing)
Relative Humidity
Level RH1 (IEC61131-2), 10 to 95% (no condensation)
Altitude
Operation: 0 to 2,000m, Transport: 0 to 3,000m
Pollution Degree
2 (IEC60664-1)
Corrosion Immunity
Free from corrosive gases
IP20 (IEC60529)
Grounding Wire
Power Supplies
Degree of Protection
UL1015, AWG22, UL1007, AWG18
When mounted on a DIN rail or panel surface:
5 to 8.4 Hz amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 (1G),
2 hours per axis on each of three mutually perpendicular axes (IEC61131-2)
Vibration Resistance
Shock Resistance
Weight
FC4A-D20RK1
FC4A-D20RS1
147 m/s2 (15G), 11 ms duration, 3 shocks per axis on three mutually perpendicular axes (IEC61131-2)
200g
230g
190g
140g
185g
180g
1. CPU module + 7 I/O modules
Sensors
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
83
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
All-in-One Type
FC5A-C10R2
FC5A-C10R2C
FC5A-C10R2D
Model
FC5A-C16R2
FC5A-C16R2C
FC5A-C16R2D
Rated Power Voltage
Allowable Voltage Range
FC5A-C24R2
FC5A-C24R2C
FC5A-C24R2D
PLCs
Maximum
Power
Consumption
AC power type: 50/60 Hz (47 to 63 Hz)
250 mA (85V AC)
160 mA (24V DC)
300 mA (85V AC)
190 mA (24V DC)
450 mA (85V AC)1
360 mA (24V DC)2
DC Power
FC5A-C10R2C/FC4A-C10R2C: 3.9W (24V DC) *5 FC5A-C10R2D: 2.8W (12V DC)4
FC5A-C16R2C/FC4A-C16R2C: 4.6W (24V DC) *5 FC5A-C16R2D: 3.4W (12V DC)4
FC5A-C24R2C/FC4A-C24R2C: 8.7W (24V DC) *3 FC5A-C24R2D: 4.2W (12V DC)4
Automation Software
Power Supplies
300 mA (85V AC)
190 mA (24V DC)
450 mA (85V AC)1
360 mA (24V DC)2
10 ms (rated power voltage)
Between power and or terminals: 1,500V AC, 1 minute
Between I/O and or terminals: 1,500V AC, 1 minute
Dielectric Strength
Between power and or terminals: 10 MΩ minimum (500V DC megger)
Between I/O and or terminals: 10 MΩ minimum (500V DC megger)
Insulation Resistance
AC power terminals: 1.5 kV, 50 ns to 1 µs
DC power terminals: 1.0 kV, 50 ns to 1 µs
I/O terminals (coupling clamp): 1.5 kV, 50 ns to 1 µs
Noise Resistance
FC5A-C10R2/FC5A-C10R2C/FC5A-C16R2/
FC5A-C16R2C: 35A
FC5A-C10R2D/FC5A-C16R2D: 20A
Power Supply Wire
FC5A-C24R2/
FC5A-C24R2C: 40A
FC5A-C24R2D: 20A
35A
40A
UL1015 AWG22, UL1007 AWG18
Operating Temperature
0 to 55°C
Storage Temperature
–25 to +70°C (no freezing)
Relative Humidity
Level RH1 (IEC61131-2), 10 to 95% (no condensation)
Altitude
Operation: 0 to 2,000m, Transport: 0 to 3,000m
Pollution Degree
2 (IEC60664-1)
Corrosion Immunity
Free from corrosive gases
Degree of Protection
Sensors
250 mA (85V AC)
160 mA (24V DC)
FC5A-C10R2/FC4A-C10R2: 30VA (264V AC), 20VA (100V AC)3
FC5A-C16R2/FC4A-C16R2: 31VA (264 V AC), 22VA (100V AC )3
FC5A-C24R2/FC4A-C24R2: 40VA (264V AC), 33VA (100V AC)1
Allowable Momentary
Power Interruption
IP20 (IEC60529)
Ground
Ground resistance 100Ω (max.)
Grounding Wire
UL1007, AWG16
When mounted on a DIN rail or panel surface:
5 to 8.4 Hz amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 (1G),
2 hours per axis on each of three mutually perpendicular axes (IEC61131-2)
Vibration Resistance
Shock Resistance
147 m/s2 (15G), 11 ms duration, 3 shocks per axis on three mutually perpendicular axes (IEC61131-2)
AC type: 230g
DC type: 240g
Weight
1.
2.
3.
4.
AC type: 250g
DC type: 260g
AC type: 305g
DC type: 310g
AC type: 230g
DC type: 240g
CPU module (including 250 mA sensor power) + 4 I/O modules
CPU module + 4 I/O modules
CPU module (including 250 mA sensor power)
CPU module
Barriers
Communication
FC4A-C24R2
FC4A-C24R2C
AC power type: 85 to 264V AC, 24V DC power type: 20.4 to 28.8V DC (including ripple), 12V DC type: 10.2 to 18.0V DC
AC Power
Inrush Current
FC4A-C16R2
FC4A-C16R2C
AC power type: 100 to 240V AC, DC power type: 24V DC, 12V DC
Rated Power Frequency
Maximum Input Current
FC4A-C10R2
FC4A-C10R2C
84 www.IDEC.com
AC type: 250g
DC type: 260g
AC type: 305g
DC type: 310g
Programmable Logic Controllers
MicroSmart Family
Slim Type Function Specifications
FC5A-D16RK1
FC5A-D16RS1
FC5A-D32K3
FC5A-D32S3
Control System
152 advanced
Program Capacity 1
User Program Storage
Flash ROM (10,000
times rewritable)
35 basic
126 advanced
130 advanced
62.4 KB (10,400 steps)
53 advanced
72 advanced
27 KB
(4,500 steps)
31.2 KB (5,200 steps) 2
EEPROM (10,000 times rewritable)
83 µs (1,000 steps)
1.65 ms (1,000 steps)
END Processing 3
0.35 ms
0.64 ms
7 modules + additional 8 modules using the expansion interface
module
7 modules
Input
8
Output
4
Expansion: 224
Additional: 256
8
Expansion: 224
Additional: 256
16
16
Expansion: 224
Additional: 256
12
8
Expansion: 128
12
8
2,048 points
Shift Register
42,000 points
Expansion Data Register
6,000 points
—
6,000 points
100 points
Timer (1-sec, 100-ms, 10-ms, 1-ms)
256 points
100 points
Internal relay, shift register, counter, data register, expansion data register
Approx. 30 days (typical) at 25°C after backup battery fully charged
Battery
Power Supplies
RAM Backup
Backup Duration
Lithium secondary battery
Charging Time
Approx. 15 hours for charging from 0% to 90% of full charge
Battery Life
5 years in cycles of 9-hour charging and 15-hour discharging
Replaceability
Self-diagnostic Function
Not possible to replace battery
Power failure, watchdog timer, data link connection, user program ROM sum check, timer/counter preset value sum check, user program RAM
sum check, keep data, user program syntax, user program writing, CPU module, clock IC, I/O bus initialize, user program execution
Input Filter
Without filter, 3 to 15 ms (selectable in increments of 1 ms)
Maximum Counting
Frequency and High-speed
Counter Points
Four inputs
(I2 and I5)
(I3 and I4)
Minimum turn on pulse width: 40 µs maximum
Minimum turn off pulse width: 150 µs maximum
Minimum turn on pulse width: 5 µs maximum
Minimum turn off pulse width: 5 µs maximum
Total 4 points Single/two-phase selectable: 100 kHz (2 points)
Single-phase: 100 kHz (2 points)
Counting Range
Total 4 points Single/two-phase selectable: 20 kHz (2 points)
Single-phase: 5 kHz (2 points)
0 to 4,294,967,295 (32 bits)
Operation Mode
0 to 65,535 (16 bits)
Rotary encoder mode and adding counter mode
Quantity
1 point
Data Range
0 to 255
Quantity
1 point
Input Voltage Range
0 to 10V DC
Input Impedance
Approx. 100 kΩ
Data Range
0 to 255 (8 bits)
Quantity
Maximum Frequency
Communication
Analog
Potentiometer
Four inputs
(I2 through I5)
Minimum turn on pulse width: 40 µs maximum
Minimum turn off pulse width: 150 µs maximum
Sensors
Catch Input/Interrupt Input
High-speed
Counter
Expansion: 224
1,300 points
256 points
Pulse
Output
16
128 points
42,000 points 4
Counter
Backup Data
24
1,024 points
256 points
Data Register
Expansion: 224
Automation Software
Internal Relay
8
PLCs
Basic Instruction
Expandable I/O Modules
Analog
Voltage
Input
FC4A-D40K3
FC4A-D40S3
Stored program system
127.8 KB
(21,300 steps)
I/O
Points
FC4A-D20RK1
FC4A-D20RS1
42 basic
Instruction Words
Processing
Time
FC4A-D20K3
FC4A-D20S3
OI Touchscreens
FC5A-D12K1E
FC5A-D12S1E
Model
3 points
2 points
3 points
100 kHz
2 points
20 kHz
Barriers
Note: The maximum number of relay outputs that can be turned on simultaneously is 54 including those on the CPU module. Modem communication not possible on FC5A-D12K1E/D12S1E modules.
1. 1 step equals 6 bytes.
2. Expandable up to 62.4 KB when a memory cartridge is used.
3. Not including expansion I/O service time, clock function processing time, data link processing time, and interrupt processing time.
4. Extra data registers D10000 through D49999 are enabled using WindLDR Function Area Settings, then run-time program download cannot be used.
5. Maintenance communication (change monitor device values, upload/download user programs, download system program)
6. Maintenance communication, user communication, modem communication, data link, Modbus ASCII/RTU master/slave communication (FC5A only).
800-262-IDEC (4332) • USA & Canada
85
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Slim Type Function Specifications (con’t)
Automation Software
PLCs
Ethernet
Port
FC5A-D16RK1
FC5A-D16RS1
Ethernet Specifications
Electrical Characteristics:
Complies with IEEE802.3
Transmission Speed:
10BASE-T/100BASE-TX
Ethernet Interface
RJ45
User Web Page Area
1 MB
Compliant Browser
Internet Explorer 7 and 8, Firefox 3
Protocol
Data Link Layer: IP, ARP
Network Layer: UDP, TCP, ICMP
Application Layer: SMTP, DHCP, HTTP, NBNS,
DNS, SNTP
Function (see table
next page)
Web server, Send email, PING, Maintenance
commnunication server, Modbus TCP server/
client, User communication server/client,
SNTP
USB mini-B (CDC class)
Maintenance Communication5
Port 1
FC5A-D32K3
FC5A-D32S3
FC4A-D20K3
FC4A-D20S3
FC4A-D20RK1
FC4A-D20RS1
FC4A-D40K3
FC4A-D40S3
—
RS232C – maintenance communication, user communications,
Modbus slave ASCII/RTU communication (FC5A only)
Port 2 Communication Adapter/
Module (option)6
Possible
Clock Cartridge (option)
Possible
Memory Cartridge (option)
Possible
HMI Module (option)
Possible
Note: The maximum number of relay outputs that can be turned on simultaneously is 54 including those on the CPU module. Modem communication not possible on FC5A-D12K1E/D12S1E modules.
1. 1 step equals 6 bytes.
2. Expandable up to 62.4 KB when a memory cartridge is used.
3. Not including expansion I/O service time, clock function processing time, data link processing time, and interrupt processing time.
4. Extra data registers D10000 through D49999 are enabled using WindLDR Function Area Settings, then run-time program download cannot be used.
5. Maintenance communication (change monitor device values, upload/download user programs, download system program)
6. Maintenance communication, user communication, modem communication, data link, Modbus ASCII/RTU master/slave communication (FC5A only).
Barriers
Communication
Sensors
Power Supplies
FC5A-D12K1E
FC5A-D12S1E
Model
86 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
All-in-One Type Function Specifications
FC5A-C10R2
FC5A-C10R2C
FC5A-C10R2D
FC5A-C16R2
FC5A-C16R2C
FC5A-C16R2D
FC5A-C24R2
FC5A-C24R2C
FC5A-C24R2D
Control System
Instruction Words
RAM Backup
Catch Input/Interrupt Input
High-speed
Counter
115 advanced
38 advanced
54 KB (9,000 steps) 4.8 KB (800 steps)
EEPROM (10,000 times rewritable)
35 basic
40 advanced
15 KB (2,500 steps)
48 advanced
27 KB (4,500 steps)
1.16 ms (1,000 steps)
1.65 ms (1,000 steps)
0.64 ms
0.64 ms
—
4 modules
—
4 modules
6
9
14
9
14
Expansion: 6
Expansion: 64
64 3
4
7
10
4
7
10
2,048 points
256 points
1,024 points
128 points
64 points
128 points
2,000 points
400 points
1,300 points
—
—
256 points
32 points
100 points
256 points
32 points
100 points
Internal relay, shift register, counter, data register
Approx. 30 days (typical) at 25°C after backup battery fully charged
Lithium secondary battery
Approx. 15 hours for charging from 0% to 90% of full charge
5 years in cycles of 9-hours charging and 15-hours discharging
Not possible to replace battery
Power failure, watchdog timer, data link connection, user program EPPROM sum check, timer/counter preset value sum check, user
program RAM sum check, keep data, user program syntax, user program writing, CPU module, clock IC, I/O bus initialize, user program
execution
Without filter, 3 to 15 ms (selectable in increments of 1 ms)
Four inputs (I2 through I5)
Minimum turn on pulse width: 40 µs maximum
Minimum turn off pulse width: 150 µs maximum
Total 4 points
Total 4 points
50 kHz (1 point)
20 kHz (1 point)
Single/two-phase selectable:
Single/two-phase selectable:
Single-phase:
5 kHz (3 points)
Single-phase:
5 kHz (3 points)
0 to 65,535 (16 bits)
Rotary encoder mode and adding counter mode
1 point
2 points
1 point
2 points
0 to 255
Sensors
—
—
Communication
Maximum Counting
Frequency and High-speed Counter
Points
Counting Range
Operation Mode
Quantity
Analog
Potentiometer Data Range
Quantity
Analog
Input Voltage Range
Voltage
Input Impedance
Input
Data Range
Quantity
Pulse
Output
Max. Frequency
Output Voltage/Current
Sensor Power
Supply
Overload
(AC Power Type Detection
Only)
Isolation
Port 1
Port 2 Communication Adapter (option) 4
Clock Cartridge (option)
Memory Cartridge (option)
HMI Module (option)
Stored program system
42 basic
103 advanced
103 advanced
13.8 KB (2,300 steps) 27 KB (4,500 steps)
Power Supplies
Input Filter
FC4A-C24R2
FC4A-C24R2C
Automation Software
Self-diagnostic Function
FC4A-C16R2
FC4A-C16R2C
PLCs
Program Capacity 1
User Program Storage
Basic Instruction
Processing
Time
END Processing 2
Expandable I/O Module
Input
I/O Points
Output
Internal Relay
Shift Register
Data Register
Expansion Data Register
Counter
Timer (1-sec, 100-ms, 10-ms, 1-ms)
Backup Data
Backup Duration
Battery
Charging Time
Battery Life
Replaceability
FC4A-C10R2
FC4A-C10R2C
OI Touchscreens
Model
24V DC (+10% to –15%), 250 mA
Not available
Isolated from the internal circuit
RS232C – maintenance communication, user communications, Modbus ASCII/RTU slave communication (FC5A only)
Possible
Possible
Possible
—
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
800-262-IDEC (4332) • USA & Canada
Barriers
1. 1 step equals 6 bytes.
2. Not including expansion I/O service time, clock function processing time, data link processing time, and interrupt processing time.
3. Expansion modules cannot be connected to FC5A-C24R2D.
4. Maintenance communication, user communication, Modem communication, data link, Modbus ASCII/RTU master/slave communication (FC5A only).
Note: The maximum number of relay outputs that can be turned on simulatneously is 33 including those on the CPU module.
87
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Communication Port (Port 1) Specifications
CPU Module
FC5A-D12K1E/D12S1E
Slim CPU
Standards
USB 2.0
EIA RS232C
All-in-One CPU
Maximum Baud Rate
USB 2.0
FC5A: 57,600 bps (maintenance communication)
FC4A: 19,200 bps (maintenance communication)
Cable
HG9Z-XCM2A
FC2A-KC4C, FC2A-KP1C, FC4A-KC1C, FC4A-KC2C
Isolation between Internal Circuit and
Communication Port
Not isolated
Not isolated
Sensors
Power Supplies
Automation Software
PLCs
Slim Type Input Specifications
Model
FC5A-D12K1E
FC5A-D12S1E
FC4A-D20K3
FC4A-D20S3
FC5A-D16RK1
FC5A-D16RS1
FC4A-D20RK1
FC4A-D20RS1
FC5A-D32K3
FC5A-D32S3
FC4A-D40K3
FC4A-D40S3
Input Points
8
(8/1 common)
12
(12/1 common)
8
(8/1 common)
12
(12/1 common)
16
(8/1 common)
24
(12/1 common)
Rated Input Voltage
24V DC sink/source input signal
Input Voltage Range
20.4 to 26.4V DC
Rated Input Current
FC5A
FC4A
I0, I1, I3, I4, I6, I7:
I2, I5, I10 to I17:
I0, I1, I6, I7:
I2 to I5, I10 to I27:
4.5 mA/point (24V DC)
7 mA/point (24V DC)
5 mA/point (24V DC)
7 mA/point (24V DC)
Input Impedance
FC5A
FC4A
I0, I1, I3, I4, I6, I7:
I2, I5, I10 to I17:
I0, I1, I6, I7:
I2 to I5, I10 to I27:
4.9 kΩ
3.4 kΩ
5.7 kΩ
3.4 kΩ
Turn ON Time
FC5A
FC4A
I0, I1, I3, I4, I6, I7:
I2 and I5:
I10 to I17:
I0, I1, I6, I7:
I2 to I5:
I10 to I27:
5 µs + filter value
35 µs + filter value
40 µs + filter value
35 µs + filter value
35 µs + filter value
40 µs + filter value
Turn OFF Time
FC5A
FC4A
I0, I1, I3, I4, I6, I7:
I2 and I5:
I10 to I17:
I0, I1, I6, I7:
I2 to I5:
I10 to I27:
5 µs + filter value
150 µs + filter value
150 µs + filter value
45 µs + filter value
150 µs + filter value
150 µs + filter value
Connector
On Mother Board
MC1.5/16-G3.81BK
(Phoenix Contact)
FL26A2MA
(Oki Electric Cable)
MC1.5/13-G-3.81BK
(Phoenix Contact)
Insertion Durability
100 times minimum
Isolation
Between input terminals: Optocoupler isolated
Internal circuit: Not isolated
Input Type
Type 1 (IEC61131-2)
External Load for I/O
Interconnection
Not needed
Single Determination Method
Static
Effect of Improper Input
Connection
Both sinking and sourcing input signals can be connected, therefore reverse connection does not cause permanent damage.
If any input exceeding the rated value is applied, permanent damage may be caused.
Cable Length
3m in compliance with electromagnetic immunity
Barriers
Communication
FL26A2MA
(Oki Electric Cable)
88 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
All-in-One Type Input Specifications
Input Points
FC5A-C16R2
FC5A-C16R2C
FC5A-C24R2
FC5A-C24R2C
FC4A-C10R2
FC4A-C10R2C
FC4A-C16R2
FC4A-C16R2C
FC4A-C24R2
FC4A-C24R2C
6
(6/1 common)
9
(9/1 common)
FC5A-C10R2D
14
(14/1 common)
FC5A-C16R2D
FC5A-C24R2D
—
—
—
6
(6/1 common)
9
(9/1 common)
14
(14/1 common)
Rated Input Voltage
24V DC sink/source input signal
12V DC sink/source input signal
Input Voltage Range
20.4 to 28.8V DC
10.2 to 18.0V DC
I0 and I1:
I2 to I7, I10 to I15:
I0 and I1:
I2 to I7, I10 to I15:
6.4 mA/point
7 mA/point (24V DC)
11 mA
7 mA/point (24V DC)
I0 and I1:
I2 to I7, I10 to I15:
6 mA
6 mA
Input Impedance
FC5A
FC4A
I0 and I1:
I2 to I7, I10 to I15:
I0 and I1:
I2 to I7, I10 to I15:
3.7 kΩ
3.4 kΩ
2.1 kΩ
3.4 kΩ
I0 and I1:
I2 to I7, I10 to I15:
1.8 kΩ
2.0 kΩ
Turn ON Time
FC5A
FC4A
I0 and I1:
I2 to I5:
I6, I7, I10 to I15:
I0 and I1:
I2 to I5:
I6, I7, I10 to I15:
2 µs + filter value
35 µs + filter value
40 µs + filter value
35 µs + filter value
35 µs + filter value
40 µs + filter value
I0 and I1:
I2 to I5:
I6, I7, I10 to I15:
2 µs + filter value
35 µs + filter value
40 µs + filter value
Turn OFF Time
FC5A
FC4A
I0 and I1:
I2 to I5:
I6, I7, I10 to I15:
I0 and I1:
I2 to I5:
I6, I7, I10 to I15:
16 µs + filter value
150 µs + filter value
150 µs + filter value
45 µs + filter value
150 µs + filter value
150 µs + filter value
I0 and I1:
I2 to I5:
I6, I7, I10 to I15:
16 µs + filter value
150 µs + filter value
150 µs + filter value
Input Type
Type 1 (IEC61131-2)
External Load for I/O
Interconnection
Single Determination Method
Power Supplies
Between input terminals: Optocoupler isolated
Internal circuit: Not isolated
Automation Software
Isolation
PLCs
Rated Input Current
FC5A
FC4A OI Touchscreens
Model
FC5A-C10R2
FC5A-C10R2C
Not needed
Static
—
Effect of Improper Input
Connection
Both sinking and sourcing input signals can be connected, therefore reverse connection does not cause permanent damage.
If any input exceeding the rated value is applied, permanent damage may be caused.
Cable Length
3m in compliance with electromagnetic immunity
Sensors
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
89
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Transistor Sink and Source Output Specifications
FC5A-D12K1E
FC5A-D12S1E
Model
FC4A-D20RK1
FC4A-D20RS1
—
Transistor Output Points
Output
Type
FC5A-D16RK1
FC5A-D16RS1
—
4 (4/1 common)
—
2 (2/1 common)
Transistor Sink
Transistor Source
FC5A-D12S1E/D16RS1/D32S3
FC4A-D20S3/D20RS1/D40S3
PLCs
Rated Load Voltage
16 (8/1 common)
20.4 to 28.8V DC
0.3A per output point
Maximum Load Current
1A per common
Voltage Drop (ON Voltage)
1V maximum (voltage between COM and output terminals when output is on)
Inrush Current
Automation Software
FC4A-D40K3
FC4A-D40S3
24V DC
Operating Load Voltage Range
Rated Load Current
Power Supplies
2 (2/1 common)
FC5A-D12K1E/D16RK1/D32K3
FC4A-D20K3/D20RK1/D40K3
FC5A-D32K3
FC5A-D32S3
1A
Leakage Current
0.1 mA maximum
Clamping Voltage
39V±1V
Maximum Lamp Load
8W
Inductive Load
L/R = 10 ms (28.8V DC, 1 Hz)
External Current Draw
Sink output: 100 mA maximum, 24V DC (power voltage at the +V terminal)
Source output: 100 mA maximum, 24V DC (power voltage at the –V terminal)
Isolation
Between output terminal and Internal circuit: Photocoupler isolated
Between output terminals: Not isolated
Connector on Mother Board
MC1.5/16-G-3.81BK
(Phoenix Contact)
FL26A2MA
(Oki Electric Cable)
Connector Insertion/
Removal Durability
MC1.5/16-G-3.81BK
(Phoenix Contact)
100 times minimum
Turn ON Time
FC5A
FC4A Q0 to Q2:
Q3 to Q7, Q10 to Q17:
Q0, Q1:
Q2 to Q7, Q10 to Q17:
5 µs max.
300 µs max.
5 µs max.
300 µs max.
Turn OFF Time
FC5A FC4A Q0 to Q2:
Q3 to Q7, Q10 to Q17:
Q0, Q1:
Q2 to Q7, Q10 to Q17:
5 µs max.
300 µs max.
5 µs max.
300 µs max.
Barriers
Communication
Sensors
Output
Delay
90 www.IDEC.com
FL26A2MA
(Oki Electric Cable)
Programmable Logic Controllers
MicroSmart Family
Relay Output Specifications
FC5A-C16R2
FC5A-C16R2C
FC5A-C16R2D
FC5A-C24R2
FC5A-C24R2C
FC5A-C24R2D
FC5A-D16RK1
FC5A-D16RS1
FC4A-C10R2
FC4A-C10R2C
FC4A-C16R2
FC4A-C16R2C
FC4A-C24R2
FC4A-C24R2C
FC4A-D20RK1
FC4A-D20RS1
Relay Output Points
Output Points per
Common Line
4
7
10
6
—
3
4
4
1
2
4
3
COM2
—
1
1
2
COM3
—
—
1
1
Output Type
1NO
2A per point
8A per common line
Maximum Load Current
Minimum Switching Load
1 mA/ 5V DC (reference value)
Initial Contact Resistance
30 mΩ maximum
100,000 operations minimum (rated load 1,800 operations/hour)
Mechanical Life
20,000,000 operations minimum (no load 18,000 operations/hour)
Automation Software
Electrical Life
240V AC/2A (resistive load, inductive load cos ø = 0.4)
30V DC/2A (resistive load, inductive load L/R =7 ms)
Rated Load
Dielectric Strength
PLCs
COM0
COM1
OI Touchscreens
Model
FC5A-C10R2
FC5A-C10R2C
FC5A-C10R2D
Between output and terminals:
Between output terminal and internal circuit:
Between output terminals (COMs):
1,500V AC, 1 minute
1,500V AC, 1 minute
1,500V AC, 1 minute
—
*1
Connector Insertion/
Removal Durability
—
100 times minimum
Power Supplies
Connector on Mother Board
1. MC1.5/16-G-3.81BK (Phoenix Contact)
Sensors
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
91
Programmable Logic Controllers
Input Usage Limits
Slim CPU
FC5A-D32K3/D32S3
FC4A-D40K3/D40S3
FC4A-D20K3/D20S3
Input Voltage (V DC)
Input Voltage (V DC)
FC5A-D16RK1/D16RS1
FC5A-D12K1E/D12S1E
Input Voltage (V DC)
26.4
Ambient Temperature
40ºC
26.4
Ambient
Temperature
55ºC
24.0
26.4
Ambient Temperature
40ºC
Input Voltage (V DC)
26.4
Ambient
Temperature
55ºC
24.0
0
50
100
I/O Simultaneous ON Ratio (%)
FC5A-C10R2
FC5A-C10R2C
FC4A-C10R2
FC4A-C10R2C
24.0
0
50
100
I/O Simultaneous ON Ratio (%)
Input Voltage (V DC)
28.8
FC5A-C16R2
FC5A-C16R2C
FC4A-C16R2
FC4A-C16R2C
Ambient Temperature
55ºC
Input Voltage (V DC)
28.8
26.4
0
50
100
I/O Simultaneous ON Ratio (%)
FC5A-C24R2
FC5A-C24R2C
FC4A-C24R2
FC4A-C24R2C
Ambient Temperature
45ºC
Ambient
Temperature
55ºC
26.4
0
50
100
I/O Simultaneous ON Ratio (%)
Input Voltage (V DC)
28.8
CAUTION: When using at an operating ambient
temperature above 40°C, reduce the input
voltage or the quantity of I/O points that turn
on simultaneously.
Ambient Temperature
45ºC
Ambient
Temperature
55ºC
26.4
0
50
100
I/O Simultaneous ON Ratio (%)
0
50
100
I/O Simultaneous ON Ratio (%)
Input Internal Circuit
I0, I1
Input
FC5A All-in-One CPU 12V DC Type
I0, I1
3.3 kΩ (FC5A)
1.8 kΩ (FC4A)
Input
COM
COM
I2 to I15
COM
I2 to I15
Input
3.3 kΩ
COM
COM
Internal Circuit
Input
3.3 kΩ
Internal Circuit
Sensors
Input
FC5A: I2, I5, I10 to I17
FC4A: I2 to I5, I10 to I27
Output Internal Circuit
Slim CPU
Sink Output
Internal
Circuit
+V
Output
Source Output
COM (+)
Internal
Circuit
Output
COM (–)
–V
Barriers
92 www.IDEC.com
1.8 kΩ
Internal Circuit
All-in-One CPU
FC5A: I0, I1, I3, I4, I6, I7
FC4A: I0, I1, I6, I7
4.7 kΩ
Input
2.0 kΩ
Internal Circuit
Slim CPU
COM
Communication
Ambient Temperature
55ºC
All-in-One CPU
Internal Circuit
PLCs
Automation Software
Ambient
Temperature
55ºC
24.0
0
50
100
I/O Simultaneous ON Ratio (%)
Power Supplies
Ambient Temperature
40ºC
FC4A-D20RK1/D20RS1
Internal Circuit
OI Touchscreens
MicroSmart Family
Programmable Logic Controllers
Communication Adapter/Module Specifications
HMI Module Specifications
FC4A-PC2
FC4A-HPC2
FC4A-PC3
FC4A-HPC3
Standards
EIA RS232C
EIA RS485
EIA RS485
Maximum Baud Rate
FC5A: 57,600 bps1
FC4A: 19,200 bps
FC5A: 57,600 bps1
FC4A: 19,200 bps
FC5A: 57,600 bps1
FC4A: 19,200 bps
(38,400 bps2)
Maintenance
Communication
Possible
Possible
Possible
User Communication
Possible
Possible3
Possible3
—
Possible
Possible
Half-duplex Communication
—
Possible
Possible
Maximum Cable
Length
Isolation between
Internal Circuit and
Communication Port
—
31
RS485 Cable
Weight
20g
Memory Cartridge Specifications
Model
FC4A-PM32
FC4A-PM646
Memory Type
Accessible
Memory Capacity
EEPROM
32 KB
64 KB
Hardware for
Storing Data
CPU Module
Software for
Storing Data
WindLDR
Quantity of Stored
Programs
FC4A-PM1286
128 KB
One user program can be stored on one memory cartridge
6. Even when using a large-capacity memory cartridge, the program capacity of the
CPU module takes effect, except when using FC4A-D20RK1, FC4A-D20RS1, FC4AD40K3, and FC4A-D40S3 CPU modules, the program capacity expands to 64KB.
Clock Cartridge Specifications
—
Twisted-pair
shielded cable
with a minimum
core wire of 0.3
mm2
Model
FC4A-PT1
Accuracy
±30 sec/month (typical) at 25°C
85 Ω/km maximum
20 Ω/km maximum
Backup Duration
Approx. 30 days (typical) at 25°C after backup battery fully charged
Battery
Lithium secondary battery
Charging Time
Approx. 10 hours for charging from 0% to 90% of full charge
Replaceability
Not possible to replace battery
Power Supplies
Shield Resistance
31
Not isolated
Cable
Conductor
Resistance
200m
5V DC (supplied from the CPU module)
Automation Software
Quantity of Slave
Stations
Special cable
Special cable
5
FC4A-PH1
Power Voltage
PLCs
Data Link Communication
Model
OI Touchscreens
Model
FC4A-PC1
FC4A-HPC1
4
MicroSmart Family
1. Maximum speed is 115,200 bps for FC5A-D12*1E.
2. Maximum speed when data link is used.
3. FC5A (all types), FC4A-D20RK1, FC4A-D20RS1, FC4A-D40K3, FC4A-D40S3
4. FC2A-KC4C, FC2A-KM1C, FC4A-KC1C, FC4A-KC2C, FC2A-KP1C
5.FC2A-KP1C
Sensors
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
93
Programmable Logic Controllers
Power Supplies
Automation Software
PLCs
OI Touchscreens
MicroSmart Family
Expansion Serial Communication Module
General Specifications
(Expansion RS232C Communication Module)
(Expansion RS485 Communication Module)
Model
FC5A-SIF2
Model
FC5A-SIF4
No. of Port
1
No. of Port
1
Synchronization
Synchronization Start-stop synchronization
Synchronization
Synchronization Start-stop synchronization
Electrical Characteristics
Electrical Characteristics EIA RS232C compliant
Electrical Characteristics
Electrical Characteristics EIA RS485 compliant
Maximum Delay in One Scan
Approx. 4 ms
Maximum Baud Rate
115,200 bps
Operating Temperature
0 to 55°C
Operating Temperature
0 to 55°C
Relative Humidity
10 to 95% (no condensation)
Relative Humidity
10 to 95% (no condensation)
Recommended Cable
Specifications
Shielded multi-core cable: 24AWG x 6
Dielectric strength: 2,000V AC/min
Insulation resistance: 100 MΩ/km
Recommended Cable
Specifications
Recommended Cable
KIDU-SB 24 AWG×6C
(Nihon Electric Wire & Cable)
Shielded twisted pair cable:
22 AWG (0.3 mm2 x 2P)
Conductor Resistance:
67 MΩ/km maximum (at 20°C)
Connector on Mother Board
MC1.5/10-G-3.81BK (Phoenix Contact)
Applicable terminal block: FC4A-PMT10P
Connector on Mother
Board
MC1.5/10-G-3.81BK (Phoenix Contact)
Applicable terminal block: FC4A-PMT10P
Connector Insertion/Removal
Durability
100 times minimum
100 times minimum
Connector Insertion/
Removal Durability
Isolation from Internal Circuit
Transformer isolated
Isolation from Internal
Circuit
Transformer isolated
Quantity of Applicable
Expansion RS232C
Communication Modules
All-in-One 24-I/O type CPU module: 3 maximum 1
Slim type CPU module: 5 maximum
Quantity of Applicable
Expansion RS485C
Communication Modules
All-in-One 24-I/O type CPU module: 3 maximum 1
Slim type CPU module: 5 maximum
Internal Current Draw
40 mA (5V/24V DC) 5
Weight
100g
Note: FC5A-SIF2 cannot be connected to FC4A CPU modules.
1. FC5A All-in-One 24-I/O CPU module cannot use the FC5A-SIF2/SIF4 module in combination
with the function modules listed in the table on the left. When using these modules in
combination with the FC5A-SIF2/SIF4 module, use the slim type CPU module.
Function Modules
Type No.
Analog Modules
FC4A-L03A1, FC4A-L03AP1, FC4A-J2A1,
FC4A-K1A1, FC4A-J4CN1, FC4A-J8C1,
FC4A-J8AT1, FC4A-K2C1, FC4A-K4A1
AS-Interface Master Module
FC4A-AS62M
Sensors
5. 85 mA (5V DC), 0 mA (24V DC) when the communication module version is lower than V200.
Internal Current Draw
40 mA (5V/24V DC)
Weight
100g
Note: FC5A-SIF4 cannot be connected to FC4A CPU modules.
Communication Specifications
Model
Maximum Baud Rate
FC5A-SIF2
FC5A-SIF4
1,200/2,400/4,800/9,600/19,200/38,400/57,6004/115,200 4
Maintenance
Communication
Possible2
Modbus
Communication
Modbus ASCII master
Modbus ASCII slave
Modbus RTU master
Modbus RTU slave
Data Link
Max Cable Length
Quantity of
Slave Stations
-
03
10m
1,200m
1
31
Barriers
Communication
2. Run-time program download is not possible.
3. Data Link can be used only on one of the communication ports.
4. Can be used when the communication module is version V200 or higher.
94 www.IDEC.com
Programmable Logic Controllers
FC4A-N08B1
Input Points
FC4A-N16B1
8 (8/1 common)
FC4A-N32B3
16 (16/1 common)
Rated Input Voltage
FC4A-N08A11
32 (16/1 common)
8 (4/1 common)
24V DC sink/source input signal
Input Voltage Range
Rated Input Current
FC4A-N16B3
100 to 120V AC (50/60 Hz)
20.4 to 28.8V DC
85 to 132V AC
7 mA/point (24V DC)
5 mA/point (24V DC)
17 mA/point (120V AC, 60 Hz)
3.4 kΩ
4.4 kΩ
0.8 kΩ (60 Hz)
Input Impedance
15V minimum
79V minimum
OFF Voltage
5V maximum
20V maximum
ON Current
4.2 mA minimum (at 15V DC)
3.2 mA minimum (at 15V DC)
—
OFF Current
1.2 mA maximum
0.9 mA maximum
—
4 ms
25 ms
Turn OFF Time
4 ms
30 ms
Between input terminals: Not isolated
Internal circuit: Photocoupler isolated
Between input terminals in the same common: Not isolated
Between input terminals in different commons: Isolated
Between input terminals and internal circuits: Photocoupler isolated
External Load for I/O
Interconnection
Not needed
Not needed
Single Determination
Method
Static
Static
Both sink and source input signals can be connected. If any input exceeding the
rated value is applied, permanent damage may be caused.
If any input exceeding the rated value is applied, permanent damage
may be caused.
3m in compliance with electromagnetic immunity
—
Effect of Improper Input
Connection
Cable Length
MC1.5/10-G-3.81BK (Phoenix Contact)
FL20A2MA (Oki Electric Cable)
Connector Insertion/
Removal Durability
Applicable Ferrule
Internal
Current
Draw
100 times minimum
1-wire: AI 0.5-8 WH (Phoenix Contact)
2-wire: AI-TWIN 2×0.5-8 WH (Phoenix
Contact)
—
—
25 mA (5V DC)
40 mA (5V DC)
35 mA (5V DC)
65 mA (5V DC)
60 mA (5V DC), 0 mA (24V DC)
All Inputs
OFF
5 mA (5V DC)
5 mA (5V DC)
5 mA (5V DC)
10 mA (5V DC)
30 mA (5V DC), 0 mA (24V DC)
0.17W
0.27W
0.24W
0.44W
—
85g
100g
65g
100g
80g
Sensors
All Inputs
ON
Internal Power
Consumption (at 24V DC
while all inputs ON)
Weight
MC1.5/11-G-3.81BK (Phoenix Contact)
Power Supplies
Connector on Mother Board
Automation Software
Turn ON Time
PLCs
ON Voltage
Isolation
OI Touchscreens
Specifications (I/O Modules)
Input Module Specifications
Model
MicroSmart Family
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
95
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Transistor Output Module Specifications
Model
FC4A-T16K3
FC4A-T16S3
Output Points
8 (8/1 common)
16 (16/1 common) 32 (16/1 common)
Output Type
PLCs
Operating Load
Voltage Range
Maximum Load Current
Automation Software
Initial Contact Resistance
3A per common
1A per common
Inrush Current
1A maximum
8W
Inductive Load
MC1.5/10-G-3.81BK
(Phoenix Contact)
Connector Insertion/
Removal Durability
Applicable Ferrule
Internal
Current
Draw
Output
Delay
—
20 mA (5V DC)
70 mA (24V DC)
All outputs
OFF
5 mA (5V DC)
0 mA (24V DC)
5 mA (5V DC)
0 mA (24V DC)
10 mA (5V DC)
0 mA (24V DC)
1.03W
Turn ON
Time
300 µs maximum
Turn OFF
Time
300 µs maximum
70g
96 Between output and or terminals: 1,500V AC, 1 minute
Between output terminal and internal circuit:
1,500V AC, 1 minute
Between output terminals (COMs): 1,500V AC, 1 minute
MC1.5/11-G-3.81BK
(Phoenix Contact)
MC1.5/10-G-3.81BK
(Phoenix Contact)
100 times minimum
1-wire: AI 0.5-8 WH (Phoenix Contact)
2-wire: AI-TWIN 2×0.5-8 WH (Phoenix Contact)
30 mA (5V DC)
40 mA (24V DC)
45 mA (5V DC)
75 mA (24V DC)
All outputs
OFF
5 mA (5V DC)
0 mA (24V DC)
5 mA (5V DC)
0 mA (24V DC)
1.16W
2.10W
110g
145g
1.82W
105g
Barriers
85g
240V AC/2A (resistive load, inductive load cos ø = 0.4)
30V DC/2A (resistive load, inductive load L/R = 7 ms)
All outputs ON
Weight
10 mA (5V DC)
40 mA (24V DC)
0.55W
Internal
Current
Draw
Internal Power Consumption
(at 24V DC while all
outputs ON)
10 mA (5V DC)
20 mA (24V DC)
Weight
Rated Load
Applicable Ferrule
All outputs
ON
Internal Power Consumption
(at 24V DC while all
outputs ON)
30 mΩ maximum
Connector Insertion/
Removal Durability
100 times minimum
8A per common
1 mA/ 5V DC (reference value)
20,000,000 operations minimum
(no load 18,000 operations/hour)
Connector
On Mother Board
FL20A2MA (Oki Electric Cable)
1-wire: AI 0.5-8 WH
(Phoenix Contact)
2-wire: AI-TWIN
2×0.5-8 WH (Phoenix Contact)
7A per common
Mechanical Life
L/R = 10 ms (28.8V DC, 1 Hz)
Between output terminal and internal circuit:
Photocoupler isolated
Between output terminals: Not isolated
Connector on
Mother Board
1NO
2A per point
Electrical Life
Dielectric Strength
FC4A-T0K0: 100 mA maximum,
24V DC (power voltage at the +V terminal)
FC4A-T0S0: 100 mA maximum,
24V DC (power voltage at the –V terminal)
16 (8/1 common)
100,000 operations minimum
(rated load 1,800 operations/hour)
39V±1V
Maximum Lamp Load
Power Supplies
20.4 to 28.8V DC
0.1A per point
FC4A-R161
8 (4/1 common)
Output Type
Minimum Switching Load
1V maximum (voltage between COM and output terminals
when output is on)
Isolation
FC4A-R081
Output Points
24V DC
Voltage Drop
(ON Voltage)
External Current Draw
Model
Maximum Load Current
0.3A per point
Clamping Voltage
Sensors
FC4A-T32K3
FC4A-T32S3
FC4A-T0K0: Transistor sink output
FC4A-T0S0: Transistor source output
Rated Load Voltage
Communication
Relay Output Module Specifications
FC4A-T08K1
FC4A-T08S1
www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
Mixed I/O Module Specifications
FC4A-M08BR1
Input Points
FC4A-M24BR2
4 (4/1 common)
16 (16/1 common)
Rated Input Voltage
24V DC sink/source input signal
Input Voltage Range
20.4 to 28.8V DC
Rated Input Current
7 mA/point (24V DC)
3.4 kΩ
ON Voltage
15V minimum
OFF Voltage
5V maximum
ON Current
4.2 mA minimum (at 15V DC)
OFF Current
1.2 mA maximum
Turn ON Time
4 ms (24V DC)
Turn OFF Time
4 ms (24V DC)
Between input terminals: Not isolated
Internal circuit: Photocoupler isolated
Isolation
Not needed
Signal Determination Method
Effect of Improper Input Connection
Static
Both sinking and sourcing input signals can be connected.
If any input exceeding the rated value is applied, permanent damage may be caused.
Cable Length
3m in compliance with electromagnetic immunity
Output Points
4 (4/1 common)
8 (4/1 common)
Output Type
1NO
2A per point
7A per common
Maximum Load Current
Power Supplies
Minimum Switching Load
1 mA/ 5V DC (reference value)
Initial Contact Resistance
30 mΩ maximum
Electrical Life
100,000 operations minimum (rated load 1,800 operations/hour)
Mechanical Life
20,000,000 operations minimum (no load 18,000 operations/hour)
240V AC/2A (resistive load, inductive load cos ø = 0.4)
30V DC/2A (resistive load, inductive load L/R = 7 ms)
Rated Load
Between output and or terminals:
Between output terminal and internal circuit:
Between output terminals (COMs):
Dielectric Strength
1,500V AC, 1 minute
1,500V AC, 1 minute
1,500V AC, 1 minute
MC1.5/11-G-3.81BK
(Phoenix Contact)
Input: F6018-17P (Fujicon)
Output: F6018-11P (Fujicon)
Connector Insertion/Removal Durability
100 times minimum
Not removable
Applicable Ferrule
Sensors
Connector on Mother Board
1-wire: AI 0.5-8 WH (Phoenix Contact), 2-wire: AI-TWIN 2×0.5-8 WH (Phoenix Contact)
25 mA (5V DC), 20 mA (24V DC)
65 mA (5V DC), 45 mA (24V DC)
All I/Os OFF
5 mA (5V DC), 0 mA (24V DC)
10 mA (5V DC), 0 mA (24V DC)
0.65W
1.52W
95g
140g
Communication
All I/Os ON
Internal Power Consumption
(at 24V DC while all I/Os are ON)
Weight
Automation Software
External Load for I/O Interconnection
Output Specifications
PLCs
Input Specifications
Input Impedance
Internal Current Draw
OI Touchscreens
Model
Barriers
800-262-IDEC (4332) • USA & Canada
97
Programmable Logic Controllers
PLCs
FC4A-N16B3/N32B3
Input
Input
Voltage
Voltage
(V(V
AC)
AC)
Ambient
Ambient
Temperature
Temperature
Temperature
Input
Voltage
(V(V
DC)
Ambient
Temperature FC4A-N08A11
Input
Voltage
DC)Ambient
55ºC
55ºC
30ºC
30ºC
28.8
28.8
132
132
Input
Voltage
Voltage
(V
(V(V
AC)
AC)
Ambient
Ambient
Temperature
Temperature
Ambient
Temperature
Input
Voltage
(V(V
DC)
Input
Voltage
(V
DC)
Temperature
Input
Input
Voltage
Voltage
(V
AC)
AC)
Ambient
Ambient
Temperature
Temperature
Input
Voltage
(V
DC)
Ambient
Temperature
Input
Voltage
DC)Ambient
Ambient
Temperature Input
26.4
26.4
55ºC
55ºC
30ºC
30ºC
120
120
Ambient
Ambient
55ºC
55ºC
30ºC
30ºC
28.8
28.8
132
132
28.8
28.8
132
132
24.0
24.0
Temperature
Temperature
102
102
26.4
26.4
120
120
26.4
26.4
Ambient
Ambient
120
120
Ambient
Ambient
55ºC
55ºC
24.0
24.0
Temperature
Temperature
102
102
24.0
24.0
Temperature
Temperature
102
102
55ºC
55ºC
55ºC
55ºC
Automation Software
100
0 0
5050
100
I/OI/O
Simultaneous
ONON
Ratio
(%)
Simultaneous
Ratio
(%)
5050
100
0
50
100
00 0
50
100
100
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
Voltage
(V(V
DC)
Input
Voltage
DC)
Ambient
Temperature
Ambient
Temperature
Temperature
Ambient
Temperature Input
Input
Voltage
(V(V
DC)
Input
Voltage
DC)Ambient
FC4A-M08BR1
FC4A-M24BR2
45ºC
45ºC
55ºC
55ºC
28.8
28.8
28.8
28.8
Input
Voltage
(V(V
DC)
Input
Voltage
(V
DC)
Ambient
Temperature
Ambient
Temperature
Ambient
Temperature
Temperature
Input
Voltage
(V(V
DC)
Input
Voltage
(V
DC)
Input
Voltage
Voltage
(V
DC)
DC)
Ambient
Ambient
Temperature
Temperature
Ambient
Temperature Input
Ambient
Temperature
Input
Voltage
(V
DC)
Input
Voltage
DC)Ambient
45ºC
45ºC
55ºC
55ºC
26.4
26.4
26.4
26.4
45ºC
45ºC
55ºC
55ºC
28.8
28.8
28.8
28.8
28.8
28.8
28.8
28.8
Ambient
Ambient
24.0
24.0
24.0
24.0
26.4
26.4
26.4
26.4
Temperature
Temperature
26.4
26.4
26.4
26.4
Ambient
Ambient
24.0
24.0
24.0
24.0
Ambient
Ambient
55ºC
55ºC
24.0
24.0
24.0
24.0
Temperature
Temperature
Temperature
Temperature
55ºC
55ºC
55ºC
55ºC
100
0 0
5050
100
100
0 0
5050
100
I/OI/O
Simultaneous
ONON
Ratio
(%)
Simultaneous
Ratio
(%)
5050
100
0
50
100
100
00 0
50
100
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/OI/O
Simultaneous
ONON
Ratio
(%)
Simultaneous
Ratio
(%)
5050
100
0
50
100
00 0
50
100
100
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
I/O
Simultaneous
Simultaneous
ON
ON
Ratio
Ratio
(%)
(%)
When using at an operating ambient temperature
above 40°C, reduce the input voltage or the quantity
of I/O points that turn on simultaneously.
Input
3.3 kΩ
COM
Input
4.3 kΩ
COM
Internal
Circuit
Input
3.3 kΩ
COM
Communication
Barriers
www.IDEC.com
Output
FC4A-T08S1, FC4A-T16S3, FC4A-T32S3
COM (+)
Internal
Circuit
Output
–V
FC4A-N08A11
Input
+V
COM (–)
FC4A-M08BR1, FC4A-M24BR2
COM
98 FC4A-T08K1, FC4A-T16K3, FC4A-T32K3
FC4A-N16B3, FC4A-N32B3
Sensors
Power Supplies
100
0 0
5050
100
I/OI/O
Simultaneous
ONON
Ratio
(%)
Simultaneous
Ratio
(%)
5050
100
0
50
100
00 0
50
100
100
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
I/O
Simultaneous
Simultaneous
ON
ON
Ratio
Ratio
(%)
(%)
FC4A-N08B1, FC4A-N16B1
Internal Circuit
FC4A-N16B1
Input
Voltage
(V(V
DC)
Temperature
Voltage
(V(V
DC)
Input
Voltage
DC) Ambient
Ambient
Temperature Input
Input
Voltage
DC)Ambient
Ambient
Temperature
Temperature
55ºC
45ºC
55ºC
45ºC
28.8
28.8
28.8
28.8
Input
Voltage
(V(V
DC)
Ambient
Temperature
Input
Voltage
(V(V
DC)
Ambient
Temperature
Input
Voltage
(V
DC)
Input
Voltage
(V
DC)
Ambient
Temperature
Ambient
Temperature
Input
Voltage
(V
DC)
Voltage
(V
DC)
Input
Voltage
DC) Ambient
Ambient
Temperature Input
Input
Voltage
DC)Ambient
Ambient
Temperature
Temperature
Temperature
55ºC
45ºC
55ºC
45ºC
26.4
26.4
26.4
26.4
55ºC
45ºC
55ºC
45ºC
28.8
28.8
28.8
28.8
Ambient
Ambient
28.8
28.8
28.8
28.8
24.0
24.0
24.0
24.0
26.4
26.4
26.4
26.4
Temperature
Temperature
26.4
26.4
26.4
26.4
Ambient
Ambient
Ambient
Ambient
55ºC
55ºC
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
Temperature
Temperature
Temperature
Temperature
55ºC
55ºC
55ºC
55ºC
0 0
5050
100
100
0 0
5050
100
100
Simultaneous
Ratio
(%)
I/OI/O
Simultaneous
ONON
Ratio
(%)
I/OI/O
Simultaneous
Simultaneous
ONON
Ratio
Ratio
(%)
(%)
5050
100
00 0
50
100
5050
100
0
50
100
100
0
50
100
00 0
50
100
100
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
I/O
Simultaneous
ON
Ratio
(%)
Output Internal Circuit
Internal Circuit
FC4A-N08B1
Input Internal Circuit
Internal Circuit
Input Usage Limits
Internal Circuit
OI Touchscreens
MicroSmart Family
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Specifications (Analog I/O Modules)
Analog I/O Module Specifications
Model
FC4A-L03A1
FC4AL03AP1
FC4A-J2A1
FC4A-J4CN1
FC4A-J8C1
FC4A-J8AT1
FC4A-K4A1
FC4A-K1A1
FC4A-K2C1
Input Points
2
2
2
4
8
8
—
—
—
Output Points
1
1
—
—
—
—
4
1
2
55 mA
130 mA
40 mA
85 mA
Power Voltage
24V DC
Allowable Voltage Range
20.4 to 28.8V DC
45 mA
Connector on Mother
Board
40 mA
35 mA
55 mA
MC1.5/11-G-3.81BK (Phoenix Contact)
50 mA
MC1.5/11-G-3.81BK
(Phoenix Contact)
MC1.5/10-G-3.81BK (Phoenix Contact)
Connector Insertion/
Removal Durability
PLCs
External Current Draw *
(24V DC)
MC1.5/10-G-3.81BK
(Phoenix Contact)
100 times minimum
Applicable Ferrule
1-wire: AI 0.5-8 WH (Phoenix Contact), 2-wire: AI-TWIN 2×0.5-8 WH (Phoenix Contact)
50 mA
50 mA
50 mA
50 mA
40 mA
45 mA
65 mA
50 mA
60 mA
Internal Power
Consumption (at 24V DC
while all I/Os are ON)
0.34W
0.34W
0.34W
0.34W
0.27W
0.30W
0.44W
0.34W
0.40W
85g
85g
85g
140g
140g
125g
100g
85g
110g
Weight
Automation Software
Internal Power
Consumption (5V DC)
* The external current draw is the value when all the analog inputs are used and the analog output value is at 100%.
Input Circuit
FC4A-J4CN1
1 kΩ
Input
– (B)
+
−
Input
Selection
Signal
I−
7Ω
Internal Circuit
10Ω
+
CS
Internal Circuit
1 kΩ
Multiplexer
+ (B’)
Current
Source
Current
Source
1 kΩ
NC (A)
FC4A-J8AT1
100Ω
−
10kΩ
A
Input
Selection
Signal
B
Internal Circuit
+V2 +V1
15MΩ
FC4A-J8C1
Power Supplies
FC4A-L03A1, FC4A-L03AP1
FC4A-J2A1
Sensors
–V1
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
99
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Analog Input Specifications (1)
Model
FC4A-L03A1, FC4A-J2A1
Input Signal Type
Voltage Input
0 to 10V DC
Current Input
4 to 20 mA
Resistance
Thermometer
Pt100 3-wire type
(–100 to 500°C)
Thermocouple
(0 to 1,300°C)
Type K
Type J
(0 to 1,200°C)
(0 to 400°C)
Type T
Input Impedance
1 MΩ minimum
10Ω
1 MΩ minimum
1 MΩ minimum
PLCs
Input Detection Current
AD
Conversion
FC4A-L03AP1
—
—
1.0 mA maximum
10 ms maximum
20 ms maximum
10 ms maximum
Sampling Repetition Time
20 ms maximum
40 ms maximum
20 ms maximum
80 ms + 1 scan time
60 ms + 1 scan time
Total Input System Transfer Time
Type of Input
60 ms + 1 scan time
Single-ended input
Differential input
Operating Mode
Self-scan
Conversion Method
∑ ∆ type ADC
Automation Software
Maximum Error at 25°C
Input
Error
±0.006% of full scale /°C
Repeatability after Stabilization Time
±0.5% of full scale
Non-linearity
±0.2% of full scale
Maximum Error
±1% of full scale
Power Supplies
Digital Resolution
4096 increments (12 bits)
Input Value of LSB
2.5 mV
Data Type in Application
Program
Default:
Optional:
4 µA
Monotonicity
Sensors
0.1°C
0.1°C
0.1°C
No
Twisted pair shielded cable
—
2 LSB maximum
Between input and power circuit: Isolated
Between input and internal circuit: Photocoupler-isolated
Effect of Improper Input Connection
Maximum Permanent Allowed Overload
(No Damage)
Type K:
Type J:
Type T:
±3% maximum when a 500V clamp voltage is applied to the power supply and I/O lines 3
Crosstalk
Isolation
0.1°C
Detectable 2
Input Filter
Recommended Cable for Noise
Immunity
Type K: 13,000 increments (14 bits)
Type J: 12,000 increments (14 bits)
Type T: 4,000 increments (14 bits)
Yes
Maximum Temporary Deviation during
Electrical Noise Tests
Noise
Resistance
6,000 increments (14 bits)
0 to 4,095
–32,768 to 32,767 (selectable for each channel)1
Input Data Out of Range
No damage
13V DC
40 mA
—
Selection of Analog Input Signal Type
Using programming software
Calibration or Verification to Maintain
Rated Accuracy
Impossible
1: The data processed in the analog I/O module can be linear-converted to a value between –32,768 and 32,767. The optional range designation, and analog I/O data minimum and maximum values can
be selected using data registers allocated to analog I/O modules.
2: When an error is detected, a corresponding error code is stored to a data register allocated to analog I/O operating status.
3: The accuracy of the thermocouple input is not guaranteed when noise is applied.
Barriers
Communication
±0.2% of full scale plus cold
junction compensation error (±4°C
maximum)
±0.2% of full scale
Temperature Coefficient
Data
—
Sampling Duration Time
100 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
Analog Input Specifications (2)
Input Signal Type
Input Range
Input Impedance
Input Detection Current
FC4A-J4CN1, FC4A-J8C1
Voltage Input
0 to 10V DC
FC4A-J4CN1
Current Input
Thermocouple
4 to 20 mA
Type K (0 to 1,300°C)
Type J (0 to 1,200°C)
Type T (0 to 400°C)
Pt100, Pt1000 3-wire type
(–100 to 500°C)
Ni100, Ni1000 3-wire type
(–60 to 180°C)
–50 to 150°C
1 MΩ
—
—
0.1 mA
0.1 mA
30 ms maximum
10 ms maximum
2 ms × channels
85 ms × channels
+ 1 scan time
50 ms × channels
+ 1 scan time
10 ms × channels + 1 scan time
7 Ω (FC4A-J4CN1)
1 MΩ
FC4A-J8AT1
Resistance
Thermometer
100Ω (FC4A-J8C1)
—
—
—
Total Input System
Transfer Time
2 ms maximum
FC4A-J4CN1: 10 ms maximum
FC4A-J8C1: 2 ms maximum
FC4A-J4CN1: 50 ms × channels + 1 scan time
FC4A-J8C1: 8 ms × channels + 1 scan time
Type of Input
Single-ended input
Operating Mode
Self-scan
Conversion Method
∑ ∆ type ADC (FC4A-J4CN1), Successive approximation register method (FC4A-J8C1, FC4A-J8AT1)
±0.2% of full scale
—
—
±0.2% of full scale +cold
junction compensation error
(±3°C maximum)
Pt100, Ni100:
±0.4% of full scale
Pt1000, Ni1000:
±0.2% of full scale
±0.2% of full scale
±3°C maximum
—
—
Temperature
Coefficient
±0.005% of full scale/°C
Repeatability after
Stabilization Time
±0.5% of full scale
Non-linearity
±0.04% of full scale
Maximum Error
Input Value of LSB
Non-linear
±1% of full scale
50,000 increments (16 bits)
0.2 mV
0.32 µA
Type K: Approx. 24,000
increments (15 bits)
Type J: Approx. 33,000
increments (15 bits)
Type T: Approx. 10,000
increments (14 bits)
Pt100: Approx. 6,400
increments (13 bits)
Pt1000: Approx. 64,000
increments (16 bits)
Ni100: Approx. 4,700
increments (13 bits)
Ni1000: Approx. 47,000
increments (16 bits)
Type K:
Type J:
Type T:
Pt100:0.086°C
Pt1000:0.0086°C
Ni100:0.037°C
Ni1000:0.0037°C
0.058°C
0.038°C
0.042°C
Approx. 4,000 increments (12 bits)
Sensors
Data
Digital Resolution
Power Supplies
Input Error
Maximum Error at 25°C
Cold Junction
Compensation Error
Automation Software
AD Conversion
Sampling Repetition
Time
PTC Thermistor
PLCs
Sampling Duration Time
NTC Thermistor
0.05°C
Default:
Optional:
Optional: –32,768 to 32,767
(selectable for each channel) 1
Resistance: 0 to 10,000
0 to 50,000
–32,768 to 32,767 (selectable for each channel) 1
Temperature: °C, °F
Monotonicity
Communication
Default: 0 to 4,000
Data Type in
Application Program
OI Touchscreens
Model
—
Yes
Input Data Out of Range
Detectable2
1: The data processed in the analog I/O module can be linear-converted to a value between –32,768 and 32,767. The optional range designation, and analog I/O data minimum and maximum values can
be selected using data registers allocated to analog I/O modules.
800-262-IDEC (4332) • USA & Canada
101
Barriers
Analog Input Specifications (2) con’t on next page.
Programmable Logic Controllers
MicroSmart Family
Model
Noise Resistance
OI Touchscreens
Analog Input Specifications (2), con’t
FC4A-J4CN1, FC4A-J8C1
Maximum Temporary
Deviation during
Electrical Noise Tests
FC4A-J4CN1
±3% maximum (when a 500V clamp voltage is applied to the power supply
and I/O lines)
Input Filter
Recommended Cable for
Noise Immunity
Twisted pair cable
—
PLCs
Automation Software
Effect of Improper Input
Connection
Maximum Permanent Allowed
Overload (No Damage)
Selection of Analog Input
Signal Type
Calibration or Verification to
Maintain Rated Accuracy
No damage
11V DC
22 mA DC
—
Using programming software
Impossible
Analog Ouput Specifications
Model
FC4A-K4A1
Output Range
Load
Power Supplies
2 LSB maximum
Between input and power circuit: Isolated
Between input and internal circuit: Optocoupler-isolated
Isolation
Sensors
±3% maximum (when a 500V clamp
voltage is applied to the power supply
and I/O lines)
Not assured
Software
Crosstalk
DA
Conversion
Output
Error
Data
Voltage
0 to 10V DC
Current
4 to 20 mA
FC4A-L03A1
FC4A-L03AP1
FC4A-K1A1
FC4A-K2C1
–10 to 10V DC
Impedance
Voltage output: 1 kΩ minimum
Current output: 300Ω maximum
Load Type
Resistive load
Settling Time
2 ms/ch
10 ms
10 ms
10 ms
1 ms/ch
Total Output System Transfer Time
2 ms/ch + 1 scan time
10 ms + 1 scan time
10 ms + 1 scan time
10 ms + 1 scan time
1 ms × channels
+ 1 scan time
Maximum Error at 25°C
±0.2% of full scale
Temperature Coefficient
±0.015% of full scale/°C
Repeatability after Stabilization
Time
±0.5% of full scale
Output Voltage Drop
±1% of full scale
Non-lineality
±0.2% of full scale
Output Ripple
20 mV maximum
Overshoot
0%
Total Error
±1% of full scale
Digital Resolution
4096 increments (12 bits)
50,000 increments (16 bits)
Voltage
2.5 mV
0.4 mV
Current
4 µA
0.32 µA
Output Value of LSB
Communication
FC4A-J8AT1
Data Type in Application Program
±0.005% of full scale/°C
±0.1% of full scale
Default: 0 to 4,095 (voltage, current)
–25,000 to 25,000 (voltage)
0 to 50,000 (current)
Optional: –32,768 to 32,767 (selected for each channel)1
Monotonicity
Yes
Current Loop Open
Undetectable
1: The data processed in the analog I/O module can be linear-converted to a value between –32,768 and 32,767. The optional range designation, and analog I/O data minimum and maximum values can
be selected using data registers allocated to analog I/O modules.
Barriers
Analog Input Specifications con’t on next page.
102 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
Analog Ouput Specifications, con’t
Noise
Resistance
FC4A-K4A1
Maximum Temporary Deviation
during Electrical Noise Tests
Isolation
FC4A-L03AP1
FC4A-K1A1
FC4A-K2C1
±3% maximum when a 500V clamp voltage is applied to the power and I/O lines
Recommended Cable for
Noise Immunity
Crosstalk
FC4A-L03A1
OI Touchscreens
Model
Twisted pair shielded cable
2LSB maximum
None
Between output and power circuit
Isolated
Between output and internal circuit
Photocoupler-isolated
Effect of Improper Output Connection
Twisted pair cable
2 LSB maximum
No damage
Using software programming
Calibration or Verification to Maintain Rated
Accuracy
PLCs
Selection of Analog Output Signal Type
Impossible
Automation Software
Power Supplies
Sensors
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
103
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
PID Module Specifications
Model
Control Mode
FC5A-F2MR2
Possible
Heating/Cooling Control
Possible (overlappling deadband settings available) *
Difference Input Temperature
Control
Possible *
Cascade Control
Possible *
Input Points
2ch
PLCs
Thermocouple
Resistance Thermometer
Automation Software
Power Supplies
2ch
K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26)
External resistance: 100Ω maximum
However, external resistance of B input: 40Ω maximum
Pt100, JPt100, 3-wire type
Allowable conductor resistance (per wire): 10Ω maximum
Current Input
0 to 20 mA DC, 4 to 20 mA DC
Input impedance: 50Ω
Maximum permanent allowed overload (no damage): 50 mA maximum
Voltage Input
0 to 1V DC
Input impedance: 1MΩ minimum
Maximum permanent allowed overload (No damage): 5V DC
Allowable output impedance: 2 kΩ
0 to 5V DC, 1 to 5V DC, 0 to 10V DC
Input impedance: 100kΩ minimum
Maximum permanent allowed overload (No damage): 15V DC maximum
Allowable output impedance: 100Ω maximum
Types of Inputs
AD Conversion
FC5A-F2M2
Independent PID Control
Sampling Duration Time
100 ms
Sampling Repetition Time
125 ms
Type of Input
Differential input
Conversion Method
∑ ∆ type ADC
Thermocouple Input
±0.2% of full scale or ±2°C (4°F), whichever is greater
However, R, S inputs: 0 to 200°C (0 to 400°F): ±6°C (12°F)
B input: 0 to 300°C (0 to 600°F) Accuracy is not guranteed.
K, J, E, T, N inputs: Less than 0°C (32°F): ±0.4% of full scale
Maximum Error at 25°C
Resistance Thermometer Input
±0.1% of full scale or ±1°C (2°F), whichever is greater
Sensors
Voltage/Current Inputs
Input Accuracy
(at 0 to 55°C)
Thermocouple Input
±0.2% of full scale
±0.7% of full scale
However, R, S input,:0 to 200°C (0 to 400°F): ±6°C (12°F)
B input: 0 to 300°C (0 to 600°F) Accuracy is not guranteed.
K, J, E, T, N inputs: Less than 0°C (32°F): ±0.9% of full scale
Resistance Thermometer Input
±0.6% of full scale
Voltage/Current Inputs
Maximum Temporary Deviation
during Electrical Noise Tests
Communication
Noise Resistance
±0.7% of full scale
Voltage input, current input ±3% maximum when a 500V clamp voltage is applied to the power supply and I/O lines
Termocouple, Resistance Thermometer
Not assured
Input Filter
None
Recommended Cable for Noise
Immunity
Twisted pair cable
Cross Talk
Isolation
Data Accuracy
None
Between input and power circuit: Transformer Isolated
Between input and internal circuit: Optocoupler isolated
Maximum error at 25°C±Minimum digital resolution of each input range
Cold Junction Temperature Compensation Accuracy
±1°C at 0 to 55°C
Sampling Period
125 ms
Barriers
Output Points
2ch
*Dual channel input is required for one loop circuit.
PID Module Specifications con’t on next page.
104 www.IDEC.com
Programmable Logic Controllers
MicroSmart Family
PID Module Specifications, con’t
Relay output 1NO
Rated load 5A 250V AC/30V DC (resistive load)
3A 250V AC (inductive load cos ø=0.4)
Minimum open/closed load: 10 mA 5V DC
Electrical life: 100,000 cycles (at the maximum rating of
resistive load)
Non-contact voltage output (for SSR drive) 12V DC±15%
Maximum 40 mA (short circuit protected)
Leakage current: 0.3 mA maximum
Analog current output
4 to 20 mA DC
Maximum Error: ±0.5% Full Scale at 25°C
±1.0% Full Scale at 55°C
Load resistance: 550Ω maximum
Analog output digital resolution: 1,000
LSB input value: 0.016 mA
Maximum Temporary Deviation
during Electrical Noise Tests
—
±3% maximum when a 500V clamp voltage is applied to
the power supply and I/O lines
Recommended Cable for Noise
Immunity
—
Twisted pair cable
Cross Talk
—
None
Isolation
Between output and power circuit: Transformer Isolated
Between output and power circuit: Transformer Isolated
Between output and internal circuit: Optocoupler isolated
Power Voltage
24V DC (External power), 5V DC (Internal power)
Allowable Voltage Range
20.4 to 28.8V DC
External Power Consumption
Approx. 3.5W maximum
Output
Noise Resistance
Automation Software
FC5A-F2M2
PLCs
FC5A-F2MR2
OI Touchscreens
Model
Internal Power Consumption (at 24V DC while all I/Os are on) 65mA (5V DC)
Connector on Mother Board
Input: F6018-17P (Fujicon)
Weight (approx.)
140g
Output: F6018-11P (Fujicon)
Input Range
K
Input Value of LSB
-200 to 1,370°C
-328 to 2,498°F
1°C (°F)
-328.0 to 752.0°F
0.1°C (°F)
-200 to 1,000°C
-328 to 1,832°F
1°C (°F)
R
0 to 1,760°C
32 to 3,200°F
1°C (°F)
S
0 to 1,760°C
32 to 3,200°F
1°C (°F)
B
0 to 1,820°C
32 to 3,308°F
1°C (°F)
E
-200 to 800°C
-328 to 1,472°F
1°C (°F)
T
-200.0 to 400.0°C
-328.0 to 752.0°F
0.1°C (°F)
N
-200 to 1,300°C
-328 to 2,372°F
1°C (°F)
PL-II
0 to 1,390°C
32 to 2,534°F
1°C (°F)
C (W/Re5-26)
0 to 2,315°C
32 to 4,199°F
1°C (°F)
-200.0 to 850.0°C
-328.0 to 1,562.0°F
0.1°C (°F)
-200 to 850°C
-328 to 1,562°F
1°C (°F)
-200.0 to 500.0°C
-328.0 to 932.0°F
0.1°C (°F)
-200 to 500°C
-328 to 932°F
1°C (°F)
Pt100
JPt100
4 to 20mA DC
-2,000 to 10,000 (12,000 increments)
1.333 μA
0 to 20mA DC
-2,000 to 10,000 (12,000 increments)
1.666 μA
0 to 1V DC
-2,000 to 10,000 (12,000 increments)
0.083 mA
0 to 5V DC
-2,000 to 10,000 (12,000 increments)
0.416 mA
1 to 5V DC
-2,000 to 10,000 (12,000 increments)
0.333 mA
0 to 10V DC
-2,000 to 10,000 (12,000 increments)
0.833 mA
Communication
-200.0 to 400.0°C
J
Sensors
Input
Type
Input Range (Digital Resolution)
Power Supplies
Input
Barriers
800-262-IDEC (4332) • USA & Canada
105
Programmable Logic Controllers
MicroSmart Family
OI Touchscreens
Expansion Interface Module Specifications
FC5A-EXM1M
(Expansion Interface Master Module)
Type No.
—
24V DC
(supplied from external power)
24V DC
(supplied from external power)
Allowable Voltage Range
—
20.4 to 26.4V DC (including ripple)
20.4 to 26.4V DC (including ripple)
Internal power
(supplied from CPU module):
0 mA (5V DC)
0 mA (24V DC)
External power: With I/O modules
750 mA (26.4V DC)1
Internal power
(supplied from CPU module):
50 mA (5V DC)
0 mA (24V DC)
External power: With I/O modules
750 mA (26.4V DC)1
PLCs
Internal power
(supplied from CPU module):
90 mA (5V DC)
0 mA (24V DC)
Maximum Power Consumption (External Power)1
—
19W (26.4V DC)
19W (26.4V DC)
Allowable Momentary Power Interruption
—
10 ms minimum (24V DC)
10 ms minimum (24V DC)
Between CPU module and expansion interface module
Connectable CPU modules: FC5A-D16RK1/D16RS1/D32K3/D32S3/D12K1E/D12S1E
Connectable I/O modules: 7 maximum
Beyond the expansion interface module
Connectable I/O modules: 8 digital I/O modules maximum (AC input modules are not applicable)2
I/O Expansion
Automation Software
FC5A-EXM2
(Expansion Interface Module)
Rated Power Voltage
Current Draw
(Internal Power/External Power)
Maximum I/O Refresh Time3
Communication between CPU Module and
Expansion Interface Module
3.6 ms
2.8 ms
Asynchronous communication
(I/O refresh of I/O modules on both sides of the expansion interface module is asynchronous.)
Isolation from Internal Circuit
Only communication interface part is isolated
Not isolated
EMC Compliant Cable Length
1m (FC5A-KX1C)
—
Power Supply
Connector
Power Supplies
FC5A-EXM1S
(Expansion Interface Slave Module)
Expansion Cable
Connector
Weight
Connector on Mother
Board
—
MKDSN1.5/3-5.08-BK
(Phoenix Contact)
MSTB2.5/3-GF-5.08BK
(Phoenix Contact)
Connector Insertion/Removal Durability
—
—
100 times minimum
Connector on Mother
Board
FCN-365P024-AU
(Fujitsu Component)
—
Connector Insertion/Removal Durability
100 times minimum
—
70g
135g
Barriers
Communication
Sensors
1: Power consumption by the expansion interface module and eight I/O modules.
2: The maximum number of relay outputs that can be turned on simultaneously is 54 points.
3: Maximum I/O refresh time of the expansion interface module. D8252 stores the refresh time.
106 www.IDEC.com
140g
Programmable Logic Controllers
MicroSmart Family
FC5A-D16RK1, FC5A-D16RS1,
FC4A-D20RK1, FC4A-D20RS1
FC5A-D32K3, FC5A-D32S3, FC4A-D40K3,
FC4A-D40S3
70.0
11.3
47.5
FC5A-D12K1E, FC5A-D12S1E
70.0
90.0
90.0
14.6
PLCs
FC5A-C24R2, FC5A-C24R2C, FC5A-C24R2D,
FC4A-C24R2, FC4A-C24R2C
FC5A-C10R2, FC5A-C16R2,
FC5A-C10R2C, FC5A-C16R2C,
FC5A-C10R2D, FC5A-C16R2D,
FC4A-C10R2, FC4A-C16R2,
FC4A-C10R2C, FC4A-C16R2C
11.3
35.4
95.0
90.0
70.0
11.3
35.4
70.0
70.0
Automation Software
4.5*
4.5*
90.0
90.0
80.0
FC4A-D20K3, FC4A-D20S3
70.0
90.0
47.5
OI Touchscreens
Dimensions (mm)
*8.5 mm when the clamp is pulled out.
*8.5 mm when the clamp is pulled out.
FC4A-N16B1, FC4A-R161, FC4A-J4CN1,
FC4A-J8C1, FC4A-J8AT1
FC5A-SIF2, FC5A-SIF4,
FC4A-AS62M, FC4A-N08A11,
FC4A-J2A1, FC4A-N08B1,
FC4A-K1A1, FC4A-R081,
FC4A-K2C1, FC4A-T08K1,
FC4A-L03A1, FC4A-T08S1,
FC4A-L03AP1, FC4A-K4A1,
FC4A-M08BR1
23 .5
14 .6
14.6
23.5
70.0
90.0
70.0
90.0
23.5
.3
2-ø4
6.3
3 .8
17.6 11.3
3.8
3.8
Power Supplies
FC4A-N16B3, FC4A-T16K3, FC4A-T16S3
FC4A-HPC1, FC4A-HPC2, FC4A-HPC3
70 .0
11.3
29.7
13.9
70.0
70.0
90.0
4 .5*
90.0
90.0
103.0
90 .0
3.8
22.5
Sensors
FC4A-N32B3, FC4A-T32K3, FC4A-T32S3
3.0
*8.5 mm when the clamp
is pulled out.
1.0
39.1
70.0
13.9
71.0
80.0
38.0
70.0
45.0
FC4A-HPH1
800-262-IDEC (4332) • USA & Canada
Barriers
2.1*
90.0
90.0
3.8
Communication
FC4A-SX5ES1E
FC5A-F2MR2, FC5A-F2M2, FC4A-M24BR2
*5.6 mm when the
clamp is pulled out.
107
Programmable Logic Controllers
MicroSmart Family
17.6
60.0 *2
35.4
70.0
60.0 *2
90.0
*8.5 mm when the clamp
is pulled out.
70.0
90.0
3.8
4.5 *1
*1: 8.5 mm when the clamp is pulled out.
*2: Reference length when the cable is bent.
Example
95.0
23.5
23.5
9.0
Automation Software
45.0
35.0
90.0
9.0
The following figure illustrates a system setup consisting
of the all-in-one 24-I/O type CPU module, an 8-point relay
output module, and a 16-point DC input module mounted on a
35-mm-wide-DIN rail using BNL6 end clips.
*1: 8.5 mm when the clamp is pulled out.
*2: Reference length when the cable is bent.
DIN Rail
Clamp
4.5*
PLCs
70.0
9.4
FC5A-EXM1S
4.5 *1
39.1
90.0
3.8
FC5A-EXM1M
4.5*
OI Touchscreens
FC5A-EXM2
End Clip (BNL6)
*8.5 mm when the clamp is pulled out.
47.5
24.1
.3
2–ø4
90.0
103.0
90.0
103.0
90.0
83.0
2-ø
83.0
FC4A-SX5ES1E
45.0
35.0
3.0
Barriers
108 23.5
4.3
4.3
2-ø
68.0
6.3
95.0
80.0
Communication
.3
2–ø4
FC5A-SIF2, FC5A-SIF4
FC4A-AS62M, FC4A-N08A11,
FC4A-J2A1, FC4A-N08B1, FC4AJ4CN1, FC4A-N16B1, FC4AJ8AT1, FC4A-R081, FC4A-J8C1,
FC4A-R161,
FC4A-K1A1, FC4A-T08K1, FC4AK2C1, FC4A-T08S1, FC4A-L03A1,
FC4A-K4A1, FC4A-L03AP1, FC4AM08BR1
www.IDEC.com
3.0
4.3
2–ø
70.0
80.0
FC5A-D12K1E, FC5A-D12S1E
FC5A-D16RK1, FC5A-D16RS1
FC5A-D32K3, FC5A-D32S3
FC4A-D20RK1, FC4A-D20RS1
FC4A-D40K3, FC4A-D40S3
FC5A-C24R2
FC5A-C24R2C
FC5A-C24R2D
FC4A-C24R2
FC4A-C24R2C
FC5A-C10R2, FC5A-C10R2C,
FC5A-C10R2D, FC5A-C16R2,
FC5A-C16R2C, FC5A-C16R2D
FC4A-C10R2, FC4A-C10R2C
FC4A-C16R2, FC4A-C16R2C
90.0
83.0
Sensors
Power Supplies
Mounting Hole Layouts
Programmable Logic Controllers
3.0
6.3
17.6
.3
2–ø4
4.8
22.5
.3
4.3
38.0
20.3
4
2–ø
2–ø
90.0
103.0
4.3
2-ø
FC4A-HPH1
PLCs
90.0
103.0
90.0
103.0
35.4
24.1
.3
2–ø4
FC4A-HPC1
FC4A-HPC2
FC4A-HPC3
90.0
103.0
39.1
6.3
FC5A-EXM1M
FC4A-N16B3
FC4A-T16K3
FC4A-T16S3
90.0
103.0
.3
2–ø4
F C5A-EXM1S
F C4A-D20K3
FC4A-D20S3
90.0
103.0
29.7
6.3
FC5A-F2MR2
FC5A-F2M2
FC5A-EXM2
FC4A-M24BR2
3.0
3.0
3.0
3.0
3.0
Mounting hole layout for FC5A-C24R2 or FC4A-C24R2 and four
23.5mm-wide I/O modules
Mounting hole layout from left, FC4A-HPH1, FC4A-D20K3, FC4A-N16B3,
FC4A-N32B3, and FC4A-M24R2 modules
4.3
Example
23.5
–ø
41.8
23.5
17.6 17.6
29.7
3.0
15.3 23.5
3.0
3.0
23.5
23.5
113.0±0.2
103.0
3.0
3.0
41.8
3.0
3.0
17.6 17.6
Power Supplies
3.0
83.0
113.0±0.2
83.0
103.0
10
23.5
Automation Software
Example
12.3
OI Touchscreens
FC4A-N32B3
FC4A-T32K3
FC4A-T32S3
MicroSmart Family
3.0
29.7
All dimensions in mm.
Sensors
Communication
Barriers
800-262-IDEC (4332) • USA & Canada
109
Programmable Logic Controllers
SmartRelay Series
IDEC SmartRelay – The Intelligent Choice
Automation Software
PLCs
OI Touchscreens
SmartRelay Series
Look around. IDEC SmartRelays are in everything from lighting controls to icemaking machines and grocery store misters. Proving reliable time after time,
these intelligent logic modules are the ideal controller for simple automation
tasks. A new fifth-generation of SmartRelays offer functions to give you even
more flexibility and convenience. Advances include extended memory, a brighter
display with higher LCD contrast, improved analog and high-speed inputs, an
external text display, and upgraded programming software.
Sensors
Power Supplies
Increase your versatility with a new remote display
With an ever changing market and tough competition, you need an edge to
stay on top. SmartRelay has a new HMI text display panel to do just that! This
economical interface lets you make quick adjustments, while at the same time
making it easy to spot and troubleshoot failures using built-in operator functions
and diagnostics. So why wait? Make the smart choice, IDEC SmartRelay!
Industrial Facility Systems
Unique Solutions
• Conveyor systems
• Solar-electric systems
• Elevator controls
• Marine systems
• Exhaust and filtering systems
• Extreme environmental conditions
• Automatic food dispensing machines
• Display panels and traffic light controls
• Water treatment and irrigation systems
• Energy management
Barriers
Communication
• Motor, pump and valve controls
Housing and Building Management
Monitoring Systems
• Lighting controls (outside and inside)
• Access controls
• Door and gate controls
• Alarm systems
• Heating and cooling systems
• Limit level monitoring
• Shutter, sun blind and awning controls
• Parking Lot monitoring
• Water and sprinkler systems
• Baggage control
• Ventilation systems
www.IDEC.com/smartrelay
110 www.IDEC.com
Programmable Logic Controllers
New Built-in Analog Inputs
FL1E can support up to four 5KHz highspeed inputs. You have the option of
configuring inputs I3, I4, I5 and I6 as fast
counter inputs to give you even more
flexibility.
New Memory Cartridges
Three memory cartridges are now available for
FL1E: Violet, Green and Brown! Violet is a 32K
high-capacity, removable program memory card.
Green is a battery card that supports a Real Time
Clock power supply for up to two years. Brown is
a combined memory/battery card.
Memory
Battery
OI Touchscreens
New Faster Inputs
Each SmartRelay is equipped with 8 digital inputs that can be used
for your applications. New in the FL1E 12/24VDC and 24VDC models
are four built-in analog inputs. Inputs I1, I2, I7, and I8 can now be
configured to accept 0-10V analog signals. Using expansion modules,
you can utilize a maximum of 24 digital and 8 analog inputs.
SmartRelay Series
Memory and
Battery
PLCs
Universal Voltages
Available in 12/24V DC for solar and vehicle
applications, and 24V AC/DC for building
automation, as well as 100-240V AC/DC,
SmartRelay can be used for a wide variety of
applications.
Operational Control Buttons
Program with just the push of a button! SmartRelay control buttons can be used to program,
modify and change preset parameters. The four
cursor keys can also be configured as inputs as
needed.
FL1E SmartRelays have a built-in LCD display with a brighter,
higher contrast screen you can adjust to your own preference.
System status — input, output, analog values, timers and
counters — can be monitored through the 4x12 LCD screen or
you can display a predefined message with up to 48 characters
(chosen from 103 special character types). Non-LCD versions
are also available.
Power Supplies
New Controllable Backlit LCD Display
Automation Software
DIN Rail or Surface Mountable
Digital Outputs
IDEC SmartRelays are equipped with four relay
outputs rated at 10A/pt. Using digital expansion modules; you can configure a maximum of
sixteen outputs.
New 50% More Memory
EEPROM Memory
With IDEC SmartRelays, your program is stored in a non-volatile EEPROM
Memory.
Extended memory gives you up to 250 bytes of retentive data memory. More
than 4 times that of FL1D!
New Arithmetic Functions
Analog Math function blocks allow basic arithmetic operations such as
addition, subtraction, multiplication, and division.
Additional text display
For the first time ever, you can connect an external text display to your SmartRelay, making it easy for you to monitor, view and troubleshoot from outside your
panel. Turn to page 7 to learn more!
Quality
IDEC has built a reputation based on providing high-quality, dependable products
you can trust, and our SmartRelays are no exception. Each model is cULus listed,
CE certified, EMC compliant, FM approved for Class 1 Div 2 hazardous locations,
C-tick compliant, Lloyds Registered and ABS approved.
Password Protection
800-262-IDEC (4332) • USA & Canada
FM
APPROVED
Barriers
Concerned about your program being copied or altered? IDEC SmartRelays keep
you safe with a unique password protection scheme allowing end users to access certain parameters without seeing or modifying the actual program.
Communication
New Extended Retentive Data Memory
Sensors
FL1E SmartRelays offer an expanded program memory of
200 function blocks! This is a 50% increase compared to
the existing FL1D series.
111
Programmable Logic Controllers
Part Numbers
Base Modules – with LCD
Style
Part Number
Voltage
FL1E-H12RCE
12/24V DC
FL1E-H12SND
24V DC
FL1E-H12RCA
24V AC/DC
Input Signal
Input
Output
With Clock
Relay
DC
PNP
I1, I2, I7 and I8 are used
for digital/analog
Yes
Transistor Source
PNP/NPN
AC/DC
PLCs
OI Touchscreens
SmartRelay Series
Relay
Yes
FL1E-H12RCC
100-240V AC/DC
PNP
Part Number
Voltage
Input Signal
Input
Output
With Clock
FL1E-B12RCE
12/24V DC
DC
I1, I2, I7 and I8 are
used for digital/analog
PNP
Relay
Yes
FL1E-B12RCA
24V AC/DC
Relay
Yes
Base Modules – without LCD
Sensors
Power Supplies
Automation Software
Style
PNP/NPN
AC/DC
FL1E-B12RCC
100-240V AC/DC
PNP
Part Number
Rated Voltage
Description
FL1E-RD1
12 VDC, 24 VAC/DC
FL1E Text Display Panel
Text Message Display
Style
Digital I/O Expansion Modules
• 8-pt expansion module (4 in/4 out)
• Max. 4 digital expansion modules
Style
Part Number
Total I/O
FL1B-M08B2R2
Input Power
Input
12/24V DC
Output
Relay
Communication
DC
FL1B-M08B1S2
FL1B-M08C2R2
8
(4 in/ 4 out)
24V DC
Transistor Sink
100-240V AC/DC
AC/DC
24V AC/DC
Barriers
FL1B-M08D2R2
112 www.IDEC.com
Relay
Programmable Logic Controllers
SmartRelay Series
Analog I/O Expansion Modules
OI Touchscreens
•
•
•
•
2-pt Analog input module
2-pt Analog output module
10-bit resolution
Max. 4 analog input modules and 1 analog output module
Style
Total I/O
Input Power
Input
Output
FL1B-J2B2
2 (2 in/0 Out)
12/24V DC
0-10V, 4-20mA
—
FL1D-K2BM2
2 (0 in/2 Out)
24V DC
­—
0-10V, 4-20mA
PLCs
Part Number
AS-Interface Communication Module
Style
Part Number
Module
Input Power
Total I/O
FL1B-CAS2
AS-Interface Communication Module
30V DC
Input: 4 points
Output: 4 points
Automation Software
• The AS-Interface communication module provides optimum solutions for decentralized controls and savings in installation space and wiring
• Virtual I/O points: 4 inputs, 4 outputs
Power Supplies
Starter Kits
IDEC SmartRelay Starter Kit is an economical and ideal solution for first time IDEC SmartRelay users
• Package includes a base module, WindLGC programming software, USB programming cable, simulator switch (DC models only) and a user’s manual
Starter Kits
Description
SMARTSTART-BAC-E
FL1E-B12RCC, WindLGC software and programming cable
SMARTSTART-BDC-E
FL1E-B12RCE, WindLGC software, programming cable, and simulator switch
SMARTSTART-HAC-E
FL1E-H12RCC, WindLGC software and programming cable
SMARTSTART-HDC-E
FL1E-H12RCE, WindLGC software, programming cable, and simulator switch
Sensors
Part Number
Accessories
Description
FL9Y-LP1CDW
WindLGC 6.0 programming software
FL1E-PC2
SmartRelay USB programming cable
FL1E-PM4
FL1E SmartRelay memory cartridge
FL1E-PB1
FL1E SmartRelay battery cartridge
FL1E-PG1
FL1E SmartRelay memory and battery combination cartridge
FL9Y-B1090-0
FL1E SmartRelay user’s manual
FL1B-Y1371-SW8
8-pt simulator switch, used with 12-24VDC, 24VDC base module only
Communication
WindLGC Software
FL9Y-LP1CDW
Part Number
Barriers
800-262-IDEC (4332) • USA & Canada
113
Programmable Logic Controllers
PLCs
OI Touchscreens
SmartRelay Series
WindLGC
Programming Software
WindLGC is the exclusive programming software for the IDEC SmartRelay using
Windows®. Edit, save, and print out your programs.
Key features:
• Ladder programming
• Online Monitor
• Program Comparison
• Time Simulation
• Simplified connection of the functions
• Programs can be saved in PDF or JPG format
Automation Software
Just click the function blocks you need and link function blocks for easy wiring.
Devise complicated circuits using the convenient functions of WindLGC.
Part Number
Part Number
Description
FL9Y-LP1CDW
WindLGC programming software for IDEC SmartRelay
Program Comparison
• OS: Windows95/98/ME/NT/2000/XP/Vista and Windows 7
• CPU recommendation: Pentium 266MHz or higher
• Memory: 64MB or more
• RAM recommendation: 128MB
• Hard disk space: 90MB or more for installing WindLGC software.
• Monitor Recommendation: Display more than 800 x 600 dots and 256
colors
• Free download service, if upgrading from WindLGC Version 3.0 to Version
5.0, available at www.idec.com/usa
Simulation Mode/Online Monitor
Ladder Programming
Communication
Sensors
Power Supplies
WindLGC system requirements:
Barriers
For more information, see the Automation Software section.
Visit www.IDEC.com/downloads for free upgrades or a free demo version.
114 www.IDEC.com
Programmable Logic Controllers
SmartRelay Series
OI Touchscreens
Specifications
Base Modules
with LCD Display
Style
Rated Power Voltage
—
24V DC
20.4 to 28.8V DC
Rated Frequency
FL1E-H12RCA
FL1E-H12RCC
FL1E-B12RCA
FL1E-B12RCC
12/24V DC
24V AC/DC
100 to 240V AC/DC
10.8 to 28.8V DC
20.4 to 26.4V AC,
20.4 to 28.8V DC
85 to 265V AC,
100 to 253V DC
47 to 63Hz
47 to 63Hz
60 to 175mA (12V DC)
40 to 100mA (24V DC)
76 to 182mA (24V AC)
40 to 100mA (24V DC)
25 to 40mA (100V AC), 20 to 30mA (240V AC)
10 to 25mA (100V DC), 6 to 15mA (240V DC)
2ms (Typ.) (12V DC)
5ms (Typ.) (24V DC)
5ms (Typ.) (24V AC/DC)
10ms (Typ.) (100V AC/DC)
20ms (Typ.) (240V AC/DC)
0.9 to 2.7VA (24V AC)
0.4 to 1.8W (24V DC)
1.1 to 4.6VA (100V AC), 2.4 to 6.0VA (240V AC)
0.5 to 2.9W (100V DC), 1.2 to 3.6W (240V DC)
—
Current Draw
—
40 to 75mA (24V DC)
Allowable Momentary Power
Interruption
—
Power Consumption
0.7 to 1.3W (24V DC)
0.3 to 1.7W (12V DC)
0.4 to 1.8W (24V DC)
Reverse Polarity Protection
Yes
Yes
—
—
80 hours (25°C)
Clock Accuracy
—
±2 sec/day maximum
DC
Input Points
8 (I1 to I8)
Analog Input Points
High-speed Input
80 hours (25°C)
1
—
80 hours (25°C)
1
±2 sec/day maximum
±2 sec/day maximum
AC/DC
AC/DC
8 (I1 to I8)
8 (I1 to I8)
4 (I1, I2, I7, I8)
—
—
4 (I3, I4, I5, I6), 5Khz maximum
—
—
0 to 10V DC (max. rated input: 28.8V DC)
—
—
Input Error
±1.5 (of full scale)
—
—
Input Resolution
10 bits (0 to 1000)
—
—
2
Input Range
Analog
1
Input
Impedance
0 to 28.8V DC
Digital Input
3.5kΩ
Analog Input
72kΩ
Isolation
Operating
Range
—
—
4.8kΩ
—
840kΩ
—
—
—
—
—
< 5V DC
< 5V AC/DC
< 40V AC, < 30V DC
ON Voltage
≥ 12V DC
≥ 12V AC/DC
≥ 79V AC, ≥ 79V DC
< 1.0mA
< 0.03mA
≥ 2.5mA
≥ 0.08mA, 100V AC: 50ms (Typ.)
ON Current
< 0.85mA (I1 to I6), < 0.05mA (I1, I2, I7, I8)
≥ 2mA (I3 to I6)
≥ 0.15mA (I1, I2, I7, I8)
≥ 1.5mA (I3 to I6)
≥ 0.1mA (I1, I2, I7, I8)
Turn ON Time
1.5ms (Typ.) ≤ 1.0ms (I3, I6)
1.5ms (Typ.)
100V AC: 50ms (Typ.), 240V AC: 30ms (Typ.)
100V DC: 25ms (Typ.) 240V DC: 15ms (Typ.
Turn OFF Time
1.5ms (Typ.) ≤ 1.0ms (I3, I6)
15ms (Typ.)
100V AC: 65ms (Typ.), 240V AC: 105ms (Typ.)
100V DC: 95ms (Typ.), 240V DC: 125ms (Typ.)
Wire Length
100m 3
100m 3
100m
Specifications con’t on next page.
Communication
1. Two year backup duration (typ.) when bettery cartridge or memory/battery cartridge used.
2. When selecting frequency trigger function and up/down counter function.
3. 10m when connected to analog input (twisted pair cable).
Sensors
OFF Voltage
OFF Current
Power Supplies
Allowable Voltage Range
Automation Software
Backup Duration
Input Signal
Input
FL1E-H12RCE
FL1E-B12RCE
PLCs
Power Supply
Allowable Voltage Range
Clock
FL1E-H12SND
without Display
Barriers
800-262-IDEC (4332) • USA & Canada
115
Programmable Logic Controllers
SmartRelay Series
with LCD Display
Style
FL1E-H12SND
without Display
Output
PLCs
OI Touchscreens
Specifications con’t
—
FL1E-H12RCC
FL1E-B12RCA
FL1E-B12RCC
Transistor source
Relay
Output Points/ Contact Configuration
4 points (separate)
4NO contacts
Isolation
—
Isolated
Dielectric Strength
(between power/input terminals
and output terminals)
—
2500V AC, 1 minute,
500V DC, 1 minute
Output Voltage
External power voltage
—
Maximum Load Current
0.3A
Short-circuit Protection
Switching
Rate
FL1E-H12RCA
FL1E-B12RCE
Output
Surge Current
Automation Software
FL1E-H12RCE
Resistive load: 10A at 12/24V AC/DC, 10A at 100/120V AC, 10A at 230/240V AC
Inductive load: 2A at 12/24V AC/DC, 3A at 100/120V AC, 3A at 230/240V AC
—
30A maximum
Built-in current limiting
resistor: Approx. 1A
External fuse required:
16A maximum
Minimum Switching Load
—
Initial Contact Resistance
—
Mechanical Life
—
10 million operations (no load, 10Hz)
Electrical Life
—
100,000 operations (rated resistive load) 1800 operations/hour
—
10Hz
Mechanical Load
Electrical Load
Resistive Load/Lamp Load
10mA, 2V DC
10mA, 12V DC
100 mΩ maximum (at 1A, 24V DC)
10Hz
1
Inductive Load
—
10Hz
2Hz
0.5Hz
0.5Hz
Barriers
Communication
General
Text Display
Style
Operating
Temperature
Specification
Standard
Horizontal Mounting
0 to 55°C
Vertical Mounting
0 to 55°C
Cold: IEC60068-2-1
Hot: IEC60068-2-2
Part Number
FL1E-RD1
Keyboard Display
Membrane keypad with 10
keys, FSTN-Graphic Display
with 128 x 64 (columns x
rows), LED backlight
Storage/Transportation Temperature
–40 to +70°C (no freezing)
Relative Humidity
10 to 95% RH (no condensation)
Atmospheric Pressure
795 to 1080 hPa
—
Operating Condition
No corrosive gas
—
Degree of Protection
IP20
—
Vibration Resistance
5 to 8.4Hz, amplitude 3.5mm
8.4 to 150Hz, acceleration 9.8m/s2
IEC60068-2-6
Shock Resistance
147m/s2
IEC60068-2-27
Drop Test
0.3m
IEC60068-2-31
Drop Test (packaged)
1m
IEC60068-2-32
Emission
Class B Group 11
EN55011
Electrostatic Discharge
8kV air discharge, 6kV contact discharge 2
IEC61000-4-2
LCD
Display
Radiation Field Immunity
Field Strength: 1V/m and 10V/m
IEC61000-4-3
Weight
Burst Pulses
2kV (power line), 1kV (I/O signal line) 3
IEC61000-4-4
Energy Carriers Single Pulse (Surge) 4
(FL1E-H12RCC, FL1E-B12RCC only)
1kV (power line) normal
2kV (power line) common
IEC61000-4-5
Communication Cable
0.5 to 2.5mm2 (one wire), 0.5 to 1.5mm2 (two wires)
—
Terminal Style
Finger-safe type
—
1. Class A for AS-Interface communication module.
2. 8kV (air discharge), 4kV (contact discharge) for
AS-Interface communication module.
3. 1kV (criteria A), 2kV (criteria B) for AS-Interface
communication module.
116 5
—
IEC60068-2-30
4. For protection against surge noise on DC power supply types
(FL1E-H12RCE/B12RCE, FL1E-H12SND, FL1E-H12RCA/B12RCA),
use surge absorbers, noise cut transformers, or noise filters.
Use of surge protection device (DEHN + SOHNE GmbH + Co.
VVT AD 24 Part No. 918 402) is recommended.
5. Tightening torque 0.4 to 0.5 N·m.
www.IDEC.com
Power Supply
Sensors
Power Supplies
1. For fluorescent lamps, if the inrush current exceeds the allowable value, use an appropriate relay.
Input Voltage
24V AC/DC, 12V DC
Allowable Voltage Range
20.4 to 26.4V AC, 10.2 to
28.8V DC
Rated Frequency
47 to 63Hz
Current Draw
30 to 55mA (24V DC)
Power
Consumption
12V DC
65mA
24V DC
40mA
24V AC
90mA
Data Transmission Rate
19200 baud
Backlight lifetime 1 20,000 hours
Display lifetime 2
50,000 hours
220g
Connect the text display and the base module using the text
display cable (2.5m). The text display cable can be extended up
to 10m using an extension cable (D-sub 9-pin).
1. Backlight durability is the number of hours it takes for the light
to become 50% of the original brightness.
2. Display durability is calculated under ordinary operating and
storage conditions: room temperature, normal humidity below
65% RH, and not subjected to direct sunlight.
Programmable Logic Controllers
SmartRelay Series
Expansion I/O Module
FL1B-M08B2R2
FL1B-M08D2R2
FL1B-M08C2R2
FL1B-J2B2
FL1D-K2BM2
24V DC
12/24V DC
24V AC/DC
100 to 240V AC/DC
12/24V DC
24V DC
85 to 265V AC
100 to 253V DC
10.8 to 28.8V DC
20.4 to 28.8V DC
10.8 to 28.8V DC
Rated Frequency
—
—
50/60Hz (47 to 63Hz)
50/60Hz (47 to 63Hz)
—
—
Current Draw
30 to 45mA
30 to 140mA (12V DC)
20 to 75mA (24V DC)
40 to 110mA (24V AC)
20 to 75mA (24V DC)
10 to 30mA (100V AC)
10 to 20mA (240V AC)
5 to 15mA (100V DC)
5 to 10mA (240V DC)
25 to 50mA
25 to 50mA
—
2ms (Typ.) (12V DC)
5ms (Typ.) (24V DC)
5ms (Typ.) (24V AC/
DC)
10ms (Typ.) (100V AC/DC)
20ms (Typ.) (240V AC/DC)
2ms (Typ.) (12V AC/
DC)
5ms (Typ.) (24V AC/
DC)
5ms (Typ.)
Power Consumption
0.8 to 1.1W
0.3 to 1.7W (12V DC)
0.4 to 1.8W (24V DC)
0.9 to 2.7VA (24V AC)
0.4 to 1.8W (24V DC)
1.1 to 3.5VA (100V AC)
2.4 to 4.8VA (240V AC)
0.5 to 1.8W (100V DC)
1.2 to 2.4W (240V DC)
0.3 to 0.6W (12V DC)
0.6 to 1.2W (24V DC)
0.6 to 1.2W (24V DC)
Reverse Polarity Protection
Yes
Yes
—
—
Yes
Yes
Input Signal
DC input
DC input
AC/DC input
AC/DC input
Analog input
—
Input Points
4
4
4
4
—
—
Isolation
—
—
—
—
—
—
0 to 28.8V DC
0 to 28.8V DC
0 to 26.4V AC
0 to 28.8V DC
0 to 265V AC
0 to 253V DC
—
—
OFF Voltage
< 5V DC
< 5V DC
< 5V AC/DC
< 40V AC
< 30V DC
—
—
ON Voltage
≥ 12V DC
≥ 8.5V DC
≥ 12V AC/DC
≥ 79V AC
≥ 79V DC
—
—
Allowable Momentary Power
Interruption
Allowable Voltage Range
Operating
Range
< 0.85mA
< 0.85mA
< 1.0mA
< 0.03mA
—
—
≥ 2mA
≥ 1.5mA
≥ 2.5mA
≥ 0.08mA
—
—
1.5ms (Typ.)
1.5ms (Typ.)
1.5ms (Typ.)
100V AC: 50ms (Typ.)
240V AC: 30ms (Typ.)
100V DC: 25ms (Typ.)
240V DC: 15ms (Typ.)
—
—
—
—
Input
Turn ON Time
1.5ms (Typ.)
1.5ms (Typ.)
1.5ms (Typ.)
Analog Input Points
—
—
—
—
2
—
—
0 to 10V
(max. rated input:
28.8V)
0 to 20mA
(max. rated input:
40mA)
—
Analog Input Range
—
—
—
Digital Resolution
—
—
—
—
10 bits (0 to 1000)
—
Input Error
—
—
—
—
±1.5% (of full scale)
—
Input Impedance
—
—
—
—
76kΩ (0 to 10V)
155 to 250Ω (0 to
20mA)
—
Sampling Cycle
—
—
—
—
50ms
—
Communication
Turn OFF Time
100V AC: 65ms (Typ.)
240V AC: 105ms (Typ.)
100V DC: 95ms (Typ.)
240V DC: 125ms (Typ.)
Sensors
OFF Current
ON Current
Power Supplies
20.4 to 28.8V DC
Automation Software
Allowable Voltage Range
20.4 to 26.4V AC
20.4 to 28.8V DC
PLCs
Power Supply
Rated Power Voltage
FL1B-M08B1S2
OI Touchscreens
Expansion I/O Module
Model Number
Expansion I/O Module Specifications con’t on next page.
Barriers
800-262-IDEC (4332) • USA & Canada
117
Programmable Logic Controllers
SmartRelay Series
Expansion I/O Module
Model Number
Wire Length
Output
Switching Rate
Sensors
FL1B-M08B2R2
FL1B-M08D2R2
FL1B-M08C2R2
FL1B-J2B2
FL1D-K2BM2
100 m
100 m
100 m
100 m
10 m (twisted-pair
shielded cable)
—
Output
Transistor source
Relay
Relay
Relay
—
Analog
4 points (separate)
4NO contacts
4NO contacts
4NO contacts
—
—
Isolation
—
Isolated
Isolated
Isolated
—
—
Dielectric Strength
(between power/input terminals and output terminals)
—
2500V AC, 1 minute
500V DC, 1 minute
2500V AC, 1 minute
500V DC, 1 minute
2500V AC, 1 minute
500V DC, 1 minute
—
—
Output Voltage
External power
voltage
(20.4 to 28.8V
DC)
—
—
—
—
—
0.3A
Resistive load
5A at 12/24V AC/DC
5A at 100/120V AC
5A at 230/240V AC
Inductive load
2A at 12/24V AC/DC
3A at 100/120V AC
3A at 230/240V AC
Resistive load
5A at 12/24V AC/DC
5A at 100/120V AC
5A at 230/240V AC
Inductive load
2A at 12/24V AC/DC
3A at 100/120V AC
3A at 230/240V AC
Resistive load
5A at 12/24V AC/DC
5A at 100/120V AC
5A at 230/240V AC
Inductive load
2A at 12/24V AC/DC
3A at 100/120V AC
3A at 230/240V AC
—
—
Short-circuit Protection
Built-in current
limiting
resistor: Approx.
1A
External fuse
required:
16A maximum
External fuse
required:
16A maximum
External fuse required:
16A maximum
—
Yes
Minimum Switching Load
—
10mA, 12V DC
10mA, 12V DC
10mA, 12V DC
—
—
Initial Contact Resistance
—
100 mΩ maximum
(at 1A, 24V DC)
100 mΩ maximum
(at 1A, 24V DC)
100 mΩ maximum
(at 1A, 24V DC)
—
—
Mechanical Life
—
10 million operations
(no load, 10Hz)
10 million operations
(no load, 10Hz)
10 million operations
(no load, 10Hz)
—
—
Electrical Life
—
100,000 operations
(rated resistive load)
1800 operations/hour
100,000 operations
(rated resistive load)
1800 operations/hour
100,000 operations
(rated resistive load)
1800 operations/hour
—
—
Analog Output Points
—
—
—
—
—
2
Analog Output Range
—
—
—
—
—
0 to 10V, 4-20mA
Digital Resolution
—
—
—
—
—
10 bits (0 to 1000V)
Output Error
—
—
—
—
—
±2.5% (of full scale)
Output Impedance
—
—
—
—
—
5kΩ
Analog Value Conversion
Interval
—
—
—
—
—
50ms
Wire Length
—
—
—
—
—
10 m (twisted-pair
shielded cable)
Mechanical Load
—
10Hz
10Hz
10Hz
—
—
Electrical Load
10Hz
—
—
—
—
—
Resistive Load/Lamp Load
10Hz
2Hz
2Hz
2Hz
—
—
Inductive Load
0.5Hz
0.5Hz
0.5Hz
0.5Hz
—
—
Barriers
Communication
FL1B-M08B1S2
Output Points/
Contact Configuration
Maximum Load Current
Power Supplies
Automation Software
PLCs
OI Touchscreens
Expansion I/O Module, con’t
118 www.IDEC.com
Programmable Logic Controllers
SmartRelay Series
General
Specification
Operating
Temperature
Horizontal
Mounting
0 to 55°C
Vertical
Mounting
0 to 55°C
OI Touchscreens
Item
Standard
Cold: IEC60068-2-1
Hot: IEC60068-2-2
–40 to +70°C 1
—
Relative Humidity
10 to 95% RH
IEC60068-2-30
Atmospheric Pressure
795 to 1080 hPa
—
Operating Condition
No corrosive gas
—
Degree of Protection
IP20
—
Vibration Resistance
5 to 9Hz, amplitude 3.5mm
9 to 150Hz, acceleration 9.8m/s2 (1G)
IEC60068-2-6
Shock Resistance
147m/s2 (15G)
IEC60068-2-27
Drop Test
50mm
IEC60068-2-31
Drop Test (packaged)
1m
Emission
Class B Group 1
Electrostatic Discharge
8kV air discharge
6kV contact discharge 4
IEC61000-4-2
Electromagnetic Fields
10V/m
IEC61000-4-3
Burst Pulses
2kV (power line)
1kV (I/O signal line) 5
IEC61000-4-4
Energy Carriers Single Pulse (Surge) 6
(FL1B-H12RCC,
FL1B-B12RCC only)
1kV (power line) normal
2kV (power line) common
IEC61000-4-5
Communication Cable
0.5 to 2.5mm2 (one wire)
0.5 to 1.5mm2 (two wires)
—
Terminal Style
Finger-safe type 7
—
2
PLCs
Storage/Transportation Temperature
IEC60068-2-32
Automation Software
3
EN55011
Power Supplies
1.
2.
3.
4.
5.
6.
No freezing
No condensation
Class A for AS-Interface communication module
8kV (air discharge), 4kV (contact discharge) for AS-Interface communication module
1kV (criteria A), 2kV (criteria B) for AS-Interface communication module
For protection against surge noise on DC power supply types (FL1D-H12RCE/B12RCE, FL1D-H12SND, FL1D-H12RCA/B12RCA),
use surge absorbers, noise cut transformers, or noise filters.
7. Tightening torque 0.4 to 0.5 N·m
Sensors
AS-Interface Communication Module
Specifications
Module Type
AS-Interface slave module
Input
Slave Type
Standard
AS-Interface
Input/Output
Output
SmartRelay
SmartRelay
AS-Interface
I/O code: 7
Output Data Bit D0
Input In
Output Qm
Input Data Bit D0
ID code: F
Output Data Bit D1
Input In+1
Output Qm+1
Input Data Bit D1
ID2 code: F
Output Data Bit D2
Input In+2
Output Qm+2
Input Data Bit D2
Virtual input: 4
Output Data Bit D3
Input In+3
Output Qm+3
Input Data Bit D3
Virtual output: 4
AS-Interface Voltage
30V DC (26.5 to 31.6V DC)
Current Draw
70 mA maximum (AS-Interface)
Communication
Profile
I/O Allocation
1. I/O point numbers “n” and “m” of the SmartRelay are automatically
allocated by the base module according to the mounted position of the
AS‑Interface communication module.
2. AS-Interface communication module is IP20 terminal type.
3. AS-Interface cable is connected to the terminal block.
Barriers
800-262-IDEC (4332) • USA & Canada
119
Programmable Logic Controllers
Dimensions (mm)
I3
I4
I5
I6
I7
Expansion I/O Module, Communication Module
I8
L+
M
RUN/STOP
1
Q1
Q2
Q3
1
Q4
55
60
PLCs
72
2
Q1
Q3
1
2
Q2
1
2
Q4
2
36
55
58
Mounting Hole Layout (Using Mounting Slides)
98±0.3
53.5 +0.2
–0.0
Automation Software
11 12 13 14
90
I2
4
I1
35
M
90
L+
4
Base Module
35
OI Touchscreens
SmartRelay Series
Base Module
35.5+0.2
–0.0
Expansion
Expansion
Module
Module
Communication Communication
Module
Module
Expansion
Module
Communication
Module
n × 35.5 +0.2
–0.0
2-ø4 Mounting Holes
Text Display
Installation
Mounting Hole Layout
119.5 + 0.5mm
F1
4
38.7
F2
F3
F4
Mounting screws
(tightening torque: 0.15 to 0.2 N·m)
ESC OK
128.2
Mounting clip
Panel (thickness: 1.5 to 4 mm)
Barriers
Communication
Sensors
Waterproof Gasket
120 www.IDEC.com
78.5 + 0.5mm
86
Power Supplies
Mounting clip