West P6170 specs

Product Specification
West P6170 1/16 Din Valve Motor Controller
The new Plus Series VMD Controllers have been specifically designed
for open loop valve motor drive applications and feature the improved
Plus Series interface and greater field flexibility.
• Jumperless Configuration
• Auto or Manual Tuning
• Auto Detected Hardware
• Motorised Valve Control
• Process & Loop Alarms
• Valve Position Indication
• Modbus Communications
• Remote/Dual Setpoint Options
Technical Data
Features
Control Types
Valve Control
Auto/Manual
Output Configuration
Alarm 1 & 2 Types
Human Interface
PC Configuration
Input
Thermocouple
RTD
DC Linear
Impedance
Accuracy
Sampling
Sensor Break Detection
Outputs & Options
Control & Alarm Relays
Control SSR Driver Outputs
Triac Outputs
DC Linear Outputs
Transmitter Power Supply
Serial Communications
Digital Input
Remote Setpoint / Valve
Position Auxiliary Input
Operating & Environmental
Temperature & RH
Power Supply
Front Panel Protection
Standards
Full PID with Pre-tune, Self-tune and manual tuning modes.
Open Loop Valve Motor Drive.
Selectable from front panel or via digital input, with bumpless transfer.
Up to 4 possible, two required for valve control, additional outputs for alarm, 24VDC transmitter
power supply or retransmit of process value or setpoint.
Process high, process low, SP deviation, band, logical OR / AND. Also 1 loop alarm for
process control security. Process alarms have adjustable hysteresis.
4 button operation, dual 4 digit 10mm & 8mm high LED displays, optional choice of colours
(Red/Red, Red/Green, Green/Red or Green/Green), plus 5 LED indicators
Off-line configuration from PC serial port to dedicated configuration socket (communications
option not required). Configuration Software for Windows 98 or higher. West Part Number:
PS1-CON
J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%.
3 Wire PT100, 50Ω per lead maximum (balanced)
0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V.
Scaleable -1999 to 9999, with adjustable decimal point
>10MΩ for Thermocouple and mV ranges, 47KΩ for V ranges and 5Ω for mA ranges
±0.1% of input range ±1 LSD (T/C CJC better than 1°C)
4 per second, 14 bit resolution approximately
<2 seconds (except zero based DC ranges), control O/P’s turn off, high alarms activate for T/C
and mV ranges, low alarms activate for RTD, mA or V ranges
Contacts SPDT 2 Amp resistive at 240V AC (120V AC Max for direct VMD), >500,000
operations. (1A 2xSPST 200,000 operations for Dual Relay)
Drive capability >10V DC in 500Ω minimum
0.01 to 1 Amp AC, 20 to 280Vrms, 47 to 63Hz. 140V Max for direct VMD.
0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min.
Accuracy ±0.25% at 250Ω (degrades linearly to 0.5% for increasing burden to specified limits)
Retransmit of PV or SP Only.
Output 24VDC (nominal) into 910Ω minimum to power external devices
2 Wire RS485, 1200 to 19200 Baud, Modbus protocol
Selects between 2 setpoints or Auto/Manual control. Volt free or TTL input
0 to 20mA, 4 to 20mA, 0 to 5V, 1 to 5V, 0 to 10V or 2 to 10V. Scaleable -1999 to 9999.
For Valve Position Indication or Remote Setpoint Input.
0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing
100 to 240V 50/60Hz 7.5VA (optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts)
IEC IP66 (Behind panel protection is IP20)
CE, UL & ULC recognised
In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document
P6170 Spec sheet - 01/06
West Instruments
The Hyde Business Park
Brighton BN2 4JU, UK
Dimensions
Tel: +44 (0) 1273 606271
Fax: +44 (0) 1273 609990
e-mail: info@westinstruments.com
Web: www.westinstruments.com
Cut out
10mm (approx)
48mm
110mm
45 x 45mm
48mm
+0.5 –0.0
45 x 45mm
+0.5 –0.0
Connection Details
Field Reconfiguration
Input
Jumper-free configuration for any type
(no extra parts required)
Option Slot 1
Part Number
Relay Output ........................... PO1-C10
Linear mA/V DC Output .......... PO1-C21
SSR Driver Output .................. PO1-C50
Triac Output ............................ PO1-C80
Option Slot 2
Part Number
Relay Output ........................... PO2-C10
Linear mA/V DC Output .......... PO2-C21
SSR Driver Output .................. PO2-C50
Triac Output ............................ PO2-C80
Dual Relay Output……………PO2-W09
Option Slot 3
Part Number
Relay Output ........................... PO2-C10
Linear mA/V DC Output .......... PO2-C21
SSR Driver Output .................. PO2-C50
24VDC Transmitter PSU........ PO2-W08
Option Slot A
Part Number
Digital Input ............................ PA1-W03
Auxiliary Input (Basic) ............ PA1-W04
RS485 Comms....................... PA1-W06
Order Code
P6170
Input Type
3 Wire RTD or DC mV
Thermocouple
DC mA
DC Voltage
Option Slot 1
Not fitted
Relay
DC for SSR
DC 0-10V
DC 0-20mA
DC 0-5V
DC 2-10V
DC 4-20mA
Triac
Option Slot 2
Not fitted
Relay
DC Driver for SSR
DC 0-10V
DC 0-20mA
DC 0-5V
DC 2-10V
DC 4-20mA
Triac
Dual Relay
-
x
-
x
-
x
-
x
-
x
-
x
-
x
1
2
3
4
0
1
2
3
0
1
2
3
4
5
6
7
8
0
2
0
1
2
3
4
5
6
7
8
9
0
1
3
4
0
1
2
3
4
5
6
7
8
Display Colour
Red Upper & Lower
Green Upper & Lower
Red Upper, Green Lower
Green Upper, Red Lower
Power Supply
100-240V AC
24-48V AC or DC
Option Slot A
Not fitted
RS485 Communications
Digital Input
Auxiliary Input (Basic)
Option Slot 3
Not fitted
Relay
DC Driver for SSR
DC 0-10V
DC 0-20mA
DC 0-5V
DC 2-10V
DC 4-20mA
Transmitter Power Supply
West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation.
Registered in England No 2815444 VAT No GB788620583
Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU