Acer X133PWH Operating Instructions Manual user guide

Acer Projector
P1183/M403/PE-S42
X1183A/D603P/EV-S62T/X114
X1183/D603/EV-S62
X113/D600/EV-S60/V10S/AS201
X113H/X113PH/D600D/EV-S60H/V12S/AS211
P1283/M413/PE-X42/V12X/AX316
P1283n/M413T/PE-X42G
X1283/X1280/D613/EV-X62
P1383W/X1383WH/M423/PE-W42/V12W/AW316
P1380W/X1380WH/M420/PE-W40/V11W/AW216
H5380BD/E230/HE-720
P1510/P1515/M450/PE-840
H6520BD/E240D/HE-804J
X133PWH/D620D/EV-W60H/V13W/AW313
X123PH/D610D/EV-X60H/V13X/AX313 Series
User's Guide
Downloaded From projector-manual.com Acer Manuals
Copyright © 2014. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 08/2014
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Model number: _________________________________
Serial number: __________________________________
Date of purchase: _______________________________
Place of purchase: ______________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product
names or trademarks are used herein for identification purposes only and belong to their respective
companies.
"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."
Downloaded From projector-manual.com Acer Manuals
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
Downloaded From projector-manual.com Acer Manuals
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
•
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (15 feet) maximum length.
Downloaded From projector-manual.com Acer Manuals
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
•
•
Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
Turn on the projector first and then signal sources
Do not place the product in following environments:
•
•
•
•
•
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
Downloaded From projector-manual.com Acer Manuals
vi
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, suggest to ensure the projector
completes its cooling cycle before disconnecting power.
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to turn off
before turning main power off.
Do not touch air outlet grille and bottom plate which becomes hot.
Clean the air filter frequently if have. The temperature inside may rise and
cause damage when the filter/ventilation slots clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when is showing warning message.
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
Downloaded From projector-manual.com Acer Manuals
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
http://www.acer-group.com/public/Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
“Lamp(s) contain Mercury,
Dispose Properly.”
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
Downloaded From projector-manual.com Acer Manuals
viii
First things first
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the unit provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
•
Reset the "Lamp Hour Reset" function from the Onscreen display "Management"
menu after replacing the lamp module.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Downloaded From projector-manual.com Acer Manuals
First things first
iii
viii
Usage Notes
viii
Precautions
viii
Introduction
1
Product Features
1
Package Overview
2
Projector Overview
3
Projector Outlook
3
Control Panel
5
Remote Control Layout
6
MHL (Mobile High-Definition Link) Control
8
Getting Started
Connecting the Projector
Turning the Projector On/Off
9
9
11
Turning on the Projector
11
Turning the projector off
12
Adjusting the Projected Image
13
Adjusting the Height of Projected Image
13
How to optimize image size and distance
14
How to get a preferred image size by adjusting
distance and zoom
18
User Controls
22
Installation menu
22
Onscreen Display (OSD) Menus
24
Color
25
Image
27
Setting
29
Management
32
Audio
33
3D
34
Language
34
Acer LAN webpage management
35
Downloaded From projector-manual.com Acer Manuals
Contents
Information for your safety and comfort
How to login in
35
Home
36
Control Panel
36
Network Setting
37
Alert Setting
37
Logout
38
Appendices
39
Troubleshooting
39
LED & Alarm Definition Listing
43
Cleaning and replacing the dust filters
44
Replacing the Lamp
45
Ceiling Mount Installation
46
Specifications
49
Compatibility modes
53
Regulations and safety notices
Downloaded From projector-manual.com Acer Manuals
58
1
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•
DLP® technology
•
P1183/M403/PE-S42/X1183A/D603P/EV-S62T/X114/X1183/D603/EV-S62/
X113/D600/EV-S60/V10S/AS201/X113H/X113PH/D600D/EV-S60H/V12S/AS211
series: Native 800 x 600 SVGA resolution
P1283/M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/X1283/X1280/
D613/EV-X62/X123PH/D610D/EV-X60H/V13X/AX313 series: Native 1024 x 768
XGA resolution
P1383W/X1383WH/M423/PE-W42/V12W/AW316/P1380W/X1380WH/M420/
PE-W40/V11W/AW216/X133PWH/D620D/EV-W60H/V13W/AW313 series:
Native 1280 x 800 WXGA resolution
H5380BD/E230/HE-720 series: 1280x720 720p resolution
P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J series: 1920x1080 1080p
resolution
Full/4:3/16:9/L.Box aspect ratio supported
•
Enables projecting 3D content via DLP Link Technology (Nvidia 3DTV Play
Ready only on H6520BD/E240D/HE-804J, H5380BD/E230/HE-720 series)
•
Acer ColorBoost technology delivers nature’s true colors for vivid, life-like
images
•
High brightness and contrast ratio
•
Versatile display modes (Bright, Presentation, Standard, Video, Game,
Education, Movie, Dark Cinema, Sports, User) enable optimum
performance in any situation
•
NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported
•
Lower power consumption and economy (ECO) mode extends lamp life
•
Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
•
Equipped with HDMI™ & MHL connection supporting HDCP
•
Advanced digital keystone correction optimizes presentations
•
Smart detection delivers quick, intelligent source detection
•
Multi-language onscreen display (OSD) menus
•
Manual focus projection lens zooms up to 1.1x
•
2x digital zoom and pan function
•
Microsoft® Windows® 2000, XP, Vista®, Windows 7, Windows 8,
Macintosh® OS compliant
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
Introduction
English
2
Package Overview
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector
Power cord
VGA cable
2 x Batteries
(option)
Security card
User’s guide
Quick start guide
Carrying case
(option)
Dust filters
(option)
Remote control
Downloaded From projector-manual.com Acer Manuals
3
English
Projector Overview
Projector Outlook
Front / upper side
3 2
5
4
6
1
7
8
#
1
2
3
4
Description
Remote control receiver
Power button
Control panel
Lamp cover
#
5
6
7
8
Downloaded From projector-manual.com Acer Manuals
Description
Zoom lever
Focus ring
Projection lens
Tilt adjusting wheels
English
4
Right / Rear side
<Right side>
1
5
2
3
6 7 8
2
#
1
2
3
4
5
6
7
8
<Rear side>
4
9 10 11 12
1
12
4
16
15
7
10
11
Description
Composite video input connector
S-Video input connector
Monitor loop-through output
connector (for VGA IN 2 only)
PC analog signal/HDTV/component
video input connector (VGA, VGA IN,
VGA IN 1, VGA IN 2)
Security bar
Audio input connector (for S-Video,
Composite)
Audio out connector
Audio in connector (for VGA IN 1, VGA
IN 2)
14
13
2
4
1
15
11
#
9
10
11
12
Description
LAN (RJ45 Port for 10/100M Ethernet)
RS232 connector
Mini USB connector
HDMI/MHL connector (HDMI/MHL,
HDMI 1/MHL)
13
Power socket
14
KensingtonTM lock port
15
HDMI 2 connector
Audio input connector ( for S-Video,
Composite, VGA)
16
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
5
1
8
2
English
Control Panel
3
4
5
9
10
6
#
Icon
7
Function
Description
1
POWER
Power Indicator LED
2
LAMP
Lamp Indicator LED
3
TEMP
Temp Indicator LED
4
RESYNC
Automatically synchronizes the projector
to the input source.
5
SOURCE
Changes the active source.
6
POWER
See the contents in "Turning the Projector
On/Off" section.
7
Mode
Press "Mode" to select the display mode
from Bright, Presentation, Standard, Video,
Game, Education and User.
8
MENU
•
Press "MENU" to launch the Onscreen
display (OSD) menu, back to the
previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
9
Four directional select Use
to select items or make
keys
adjustments to your selection.
10
Keystone
Adjusts the image to compensate for
distortion caused by tilting the projector (±
40 degrees).
Downloaded From projector-manual.com Acer Manuals
English
6
Remote Control Layout
1
25
3
2
5
7
9
SOURCE
SETUP
MODE
HIDE
ZOOM
RATIO
FREEZE
SOURCE
4
MEDIA
6
MEDIA
SETUP
MODE
HIDE
8
10
11
26
ZOOM
FREEZE
12
13
14
Model No:E-26171
15
16
17
18
19
20
21
22
23
24
E-26110
LASER MODULE : M-5.2-6.5x10-5.5x5.5
BONTECH ELECTRONICS(K.S) CO ., LTD .
No. 2018, Zhonghuayuan west road,
Yushan town,Kunshan city, China
MC.JG811.008
MC.JG811.009
#
Icon
Function
Description
1
Infrared
transmitter
Sends signals to the projector.
2
POWER
Refer to the "Turning the Projector On/Off" section.
3
3D
Press "3D" to select 3D models.
4
SOURCE
Changes the active source.
5
MODE
Press "MODE" to select the display mode from Bright,
Presentation, Standard, Video, Game, Education and User.
6
HIDE
Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
7
MEDIA_SETUP No function.
8
RATIO
9
ZOOM
Zooms the projector display in or out.
10
FREEZE
To pause the screen image.
11
MENU
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
12
KEYSTONE
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
13
Four
directional
select keys
Use up, down, left, right buttons to select items or make
adjustments to your selection.
To choose the desired aspect ratio.
Downloaded From projector-manual.com Acer Manuals
7
Icon
Function
Description
Pre./Rewind
No function.
Enter/ Play/
Pause
No function.
Back/Stop
No function.
Next/Fast
forward
No function.
15
KeyPad 0~9
Press "0~9" to input a password in the "Security" OSD.
16
PgUp/PgDn
For computer mode only. Use this button to select the next or
previous page. This function is only available when USB Ctrl
connector (mini type B) is connected to a computer via a USB
cable.
17
COMPONENT
No function.
18
VIDEO
To change source to COMPOSITE VIDEO.
19
VGA
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
20
S-VIDEO
To change source to S-Video.
21
SD/USB A
No function.
22
USB B
For USB control and firmware upgrade.
23
HDMI/DVI
To change source to HDMI/MHL. (no DVI function)
24
LAN/WiFi
Press "LAN/WiFi" to display the image which is wire or
wirelessly transmitted from the PC to the projector via the
"Acer LAN webpage management" utility.
25(*)
Laser pointer
Aim the remote at the viewing screen.
(*)
Laser button
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
26
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
#
14
English
8
MHL (Mobile High-Definition Link) Control
2
SOURCE
1
MEDIA
SETUP
MODE
HIDE
FREEZE
ZOOM
3
4
5
6
8
7
#
Icon
Component
Description
•
Press "MODE" button for one second to activate the
MHL Control Mode.
•
To exit, press the "MODE" button again.
1
MODE
2
SOURCE
Press the "SOURCE" button to toggle between Navigation
or Numeric mode.
3
MENU
Press to launch the root memu.
(only for Navigation mode)
4
Direction Keys Use up, down, left, right buttons to select items or make
adjustments to your selection.
(only for Navigation mode)
5
Select
To select the file. (only for Navigation mode)
6
Exit
To exit the file. (only for Navigation mode)
7
PgUp/PgDn
Use the button to select the next or previous
page. (only for Navigation mode)
8
KeyPad 0~9
Number buttons. (only for Numeric mode)
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
9
English
Getting Started
Connecting the Projector
<Type 1>
DVD player,
Set-top Box,
HDTV receiever
D-Sub
5
D-Sub
W R
R B G
S-Video output
DVD player
11
2
Video output
R B G
2
12
4
W R
HDMI
D-Sub
VGA IN 2
VGA OUT
USB
MHL
HDTV adapter
D-Sub
Y
HDMI
6
8
HDMI
VGA IN 1
7
S-VIDEO
Y
8
VIDEO
/ MHL
AUDIO IN
AUDIO OUT
USB
AUDIO IN
RS232
USB CTRL
RS232
1
8
13
9
RS232
3
RS232
10
R W
Internet
Downloaded From projector-manual.com Acer Manuals
USB
English
10
<Type 2>
5
D-Sub
Video output
6
Y
R B G
S-Video output
R B G
DVD player, Settop Box, HDTV
receiever
2
4
7
HDTV adapter
Y
D-Sub
HDMI
USB
1
10
DVD player
HDMI
11
#
Description
USB
#
8
Description
1
Power cord
Audio cable jack/RCA
2
VGA cable
9
RS232 cable
3
Audio cable jack/jack
10
USB cable
4
VGA to component/HDTV adapter
11
HDMI cable
5
3 RCA component cable
12
MHL cable (MicroUSB to HDMI)
6
S-Video cable
13
RJ45 cable
7
Composite video cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note: Functions vary depending on model definition.
Note: USB cable needs powered extender if the length is over 5 m.
Note: VGA OUT loops through for VGA IN 2 only.
Note: Some smartphones require a converter (supplied by
smartphone maker) to enable the MHL function.
Downloaded From projector-manual.com Acer Manuals
11
Turning on the Projector
1
Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
2
Turn on the projector by pressing "Power" button on the control panel or
remote control, and the Power indicator LED will turn blue.
3
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
•
If the screen displays "Lock" and "Source" icons, it means the
projector is locked onto a specific source type and there is no such
type of input signal detected.
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
Power button
Downloaded From projector-manual.com Acer Manuals
English
Turning the Projector On/Off
English
12
Turning the projector off
1
To turn the projector off, press and hold the power button. This message
appears: "Please press the power button again to complete the shutdown
process." Press the power button again.
2
The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 2 minutes to
ensure that the system cools properly. (only supported under "Instant
Resume" mode)
3
As long as the power cord remains plugged in, you can press the power
button to turn the projector immediately back on anytime during the 2minute shutdown process. (only supported under "Instant Resume" mode)
4
Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
5
It is now safe to unplug the power cord.
Warning indicators:
•
"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp with automatically turn off, the projector will automatically
shut down, and the LED temp indicator will turn solid red. Contact
your local dealer or service center.
•
"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and the
LED lamp indicator turns solid red, contact your local reseller or
service center.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
13
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise/lower the image:
Use Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel
Downloaded From projector-manual.com Acer Manuals
English
Adjusting the Projected Image
English
14
How to optimize image size and distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
•
SVGA/XGA series
If the projector is 2.0 m from the screen, good image quality is possible for
image sizes between 46" and 50".
Note: Remind as below figure, the space of 88 cm height is
required when located at 2.0 m distance.
M ax
sc re
Mi n
en s
scre
iz e
en s
i
50"
ze
B
46"
Height:
80 cm
C
Height: 88 cm
from base to top
of image
A
2.0 m
Desired Distance
Screen size
Screen size
Top
Top
Desired
(Min zoom)
(Max zoom)
Distance
Diagonal
From base to top Diagonal
From base to top
(m)
W (cm) x H
W (cm) x H
(inch)
of image (cm)
(inch)
of image (cm)
<A>
(cm)
(cm)
<B>
<C>
<B>
<C>
1
23
47 x 35
40
25
51 x 38
44
2
46
93 x 70
80
50
103 x 77
88
2.5
57
116 x 87
100
63
128 x 96
111
3
69
140 x 105
120
76
154 x 115
133
3.5
80
163 x 122
140
88
179 x 135
155
4
92
186 x 140
160
101
205 x 154
177
4.5
103
209 x 157
181
114
231 x 173
199
5
114
233 x 174
201
126
256 x 192
221
6
137
279 x 209
241
151
308 x 231
265
7
160
326 x 244
281
177
359 x 269
310
8
183
372 x 279
321
202
410 x 308
354
9
206
419 x 314
361
227
462 x 346
398
10
229
465 x 349
401
252
513 x 385
442
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
15
WXGA series
If the projector is 2.0 m from the screen, good image quality is possible for
image sizes between 55" and 60".
Note: Remind as below figure, the space of 91 cm height is
required when located at 2.0 m distance.
Ma
x sc
ree
n si
ze
Min
scre
en
si
B
ze
60"
55"
Height: 91 cm
from base to
Height: top of image
83 cm
C
A
2.0 m
Desired Distance
Screen size
Top
Screen size
Top
Desired
(Min zoom)
(Max zoom)
Distance
From base
From base to
Diagonal
Diagonal
(m)
to top of
top of image
(inch)
W
(cm)
x
H
(cm)
(inch)
W
(cm)
x
H
(cm)
<A>
image (cm)
(cm)
<B>
<B>
<C>
<C>
1
27
59 x 37
41
30
65 x 40
45
1.5
41
88 x 55
62
45
97 x 60
68
2
55
118 x 74
83
60
129 x 81
91
2.5
68
147 x 92
103
75
161 x 101
113
3
82
176 x 110
124
90
194 x 121
136
3.5
96
206 x 129
145
105
226 x 141
159
4
109
235 x 147
165
120
258 x 161
181
4.5
123
265 x 165
186
135
290 x 181
204
5
137
294 x 184
207
150
323 x 202
227
6
164
353 x 221
248
180
387 x 242
272
7
191
412 x 257
289
210
452 x 282
317
8
218
471 x 294
331
240
516 x 323
363
9
246
529 x 331
372
270
581 x 363
408
10
273
588 x 368
413
300
645 x 403
453
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
English
•
English
16
•
720p series
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 80" and 87".
Note: Remind as below figure, the space of 130 cm height is
required when located at 3 m distance.
Ma
x sc
ree
n
Mi n
scre
size
en s
B
ize
87"
80 "
Height: 130 cm
from base to top
Height: of image
118 cm
C
A
3m
Desired Distance
Screen size
Screen size
Top
Top
Desired
(Min zoom)
(Max zoom)
Distance
From base to
Diagonal
Diagonal
From base to top
(m)
W (cm) x H top of image
W (cm) x H
(inch)
(inch)
of image (cm)
<A>
(cm)
(cm)
(cm)
<B>
<B>
<C>
<C>
0.9
24
53 x 30
36
26
58 x 33
39
1
27
59 x 33
39
29
65 x 36
1.5
40
88 x 50
59
44
97 x 54
65
2
53
118 x 66
79
58
129 x 73
87
2.5
66
147 x 83
99
73
161 x 91
108
3
80
176 x 99
118
87
194 x 109
130
3.5
93
206 x 116
138
102
226 x 127
152
4
106
235 x 132
158
117
258 x 145
173
4.5
120
265 x 149
178
131
290 x 163
195
5
133
294 x 165
197
146
323 x 181
216
6
159
353 x 199
237
175
387 x 218
260
7
186
412 x 232
276
204
452 x 254
303
9
239
529 x 298
355
262
581 x 327
390
10
266
588 x 331
395
291
645 x 363
433
10.5
279
618 x 347
414
306
677 x 381
455
11.8
314
694 x 390
466
34
761 x 428
511
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
43
17
1080p series
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 84" and 92".
Note: Remind as below figure, the space of 132 cm height is
required when located at 3 m distance.
Ma
x sc
re e
n si
Mi n
scre
ze
en s
B
ize
92"
84 "
Height:
121 cm
Height: 132 cm
from base to top
of image
C
A
3m
Desired Distance
Screen size
Screen size
Top
Top
Desired
(Min zoom)
(Max zoom)
Distance
From base to
Diagonal
Diagonal
From base to top
(m)
W (cm) x H top of image
W (cm) x H
(inch)
(inch)
of image (cm)
<A>
(cm)
(cm)
(cm)
<B>
<B>
<C>
<C>
1.5
42
93 x 52
60
46
101 x 57
66
2
56
123 x 69
81
61
135 x 76
88
2.5
70
154 x 87
101
76
169 x 95
110
132
3
84
185 x 104
121
92
203 x 114
3.5
98
216 x 122
141
107
236 x 133
154
4
112
247 x 139
161
122
270 x 152
176
4.5
125
278 x 156
181
137
304 x 171
198
5
139
309 x 174
201
153
338 x 190
220
6
167
370 x 208
242
183
405 x 228
265
7
195
432 x 243
282
214
473 x 266
309
8
223
494 x 278
322
244
541 x 304
353
9
251
556 x 313
363
275
608 x 342
397
10
279
617 x 347
403
305
676 x 380
441
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
English
•
English
18
How to get a preferred image size by adjusting
distance and zoom
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
•
SVGA/XGA series
To obtain an image size of 50" set the projector at a distance 2.0 m and 2.2 m
from the screen.
A
50"
Desired image
size
D
Height: 88 cm
from base to top
of image
2.0 m
2.2 m
C
Desired Image Size
Diagonal (inch)
<A>
30
40
50
60
70
80
90
100
120
150
180
200
250
300
Zoom Ratio: 1.1x
B
Desired Distance
Distance (m)
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
61 x 46
81 x 61
102 x 76
122 x 91
142 x 107
163 x 122
183 x 137
203 x 152
244 x 183
305 x 229
366 x 274
406 x 305
508 x 381
610 x 457
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.8
5.9
7.1
7.9
9.9
11.9
1.3
1.7
2.2
2.6
3.1
3.5
3.9
4.4
5.2
6.6
7.9
8.7
10.9
Downloaded From projector-manual.com Acer Manuals
Top (cm)
From base to top of
image
<D>
53
70
88
105
123
140
158
175
210
263
315
351
438
526
19
WXGA series
To obtain an image size of 60" set the projector at a distance 2.0 m and 2.2 m
from the screen.
A
60"
Desired
image size
D
Height: 91 cm
from base to top
of image
2.0 m
2.2 m
C
B
Desired Distance
Desired Image Size
Distance (m)
Top (cm)
From base to top of
image
<D>
45
Diagonal (inch)
<A>
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
30
65 x 40
1.0
1.1
40
86 x 54
1.3
1.5
61
50
108 x 67
1.7
1.8
76
60
129 x 81
2.0
2.2
91
70
151 x 94
2.3
2.6
106
80
172 x 108
2.7
2.9
121
90
194 x 121
3.0
3.3
136
100
215 x 135
3.3
3.7
151
120
258 x 162
4.0
4.4
182
150
323 x 202
5.0
5.5
227
180
388 x 242
6.0
6.6
272
200
431 x 269
6.7
7.3
303
250
538 x 337
8.3
9.2
378
300
646 x 404
10.0
11.0
454
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
English
•
English
20
•
720p series
To obtain an image size of 60" set the projector at a distance 2.06 m and 2.26 m
from the screen.
A
60"
Desired
image size
D
Height: 89 cm
from base to top of
image
2.06 m
2.26 m
C
Desired Image Size
B
Desired Distance
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
26.57
59 x 33
0.91
1.00
Top (cm)
From base to top of
image
<D>
39
30
66 x 37
1.03
1.13
45
40
89 x 50
1.37
1.51
59
60
133 x 75
2.06
2.26
89
70
155 x 87
2.40
2.63
104
80
177 x 100
2.75
3.01
119
90
199 x 112
3.09
3.39
134
100
221 x 125
3.43
3.76
149
120
266 x 149
4.12
4.52
178
150
332 x 187
5.15
5.65
223
180
398 x 224
6.18
6.77
267
250
553 x 311
8.58
9.41
371
300
664 x 374
10.29
11.29
446
306
677 x 381
10.50
11.52
455
Diagonal (inch)
<A>
Distance (m)
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
21
1080p series
To obtain an image size of 50" set the projector at a distance 1.6 m and 1.8 m
from the screen.
A
50"
Desired
image size
D
Height: 72 cm
from base to top of
image
1.6 m
1.8 m
C
B
Desired Distance
Desired Image Size
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
30
66 x 37
1.0
1.1
Top (cm)
From base to top of
image
<D>
43
40
89 x 50
1.3
1.4
58
50
111 x 62
1.6
1.8
72
60
133 x 75
2.0
2.2
87
70
155 x 87
2.3
2.5
101
80
177 x 100
2.6
2.9
116
90
199 x 112
2.9
3.2
130
100
221 x 125
3.3
3.6
144
120
266 x 149
3.9
4.3
173
150
332 x 187
4.9
5.4
217
180
398 x 224
5.9
6.5
260
200
443 x 249
6.6
7.2
289
250
553 x 311
8.2
9.0
361
300
664 x 374
9.8
10.8
433
Diagonal (inch)
<A>
Distance (m)
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
English
•
English
22
User Controls
Installation menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No signal
input" is displayed on the screen.
The menu options include settings and adjustments for screen size and distance,
focus, keystone correction and more .
1
Turn on the projector by pressing "Power" button on the control pad.
2
Press the "MENU" button on the remote control to launch the OSD for
projector installation and maintenance.
3
The background pattern acts as a guide to adjusting the calibration and
alignment settings, such as screen size and distance, focus and more .
4
The Installation menu includes the following options:
•Projection method
•Projection Mode
•Projection Location
•Auto Keystone settings
•Manual Keystone settings
•H. Keystone
•V. Keystone
•LAN/WiFi
•LAN
•LAN IP/Mask
•USB Display
•Language settings
•Reset to factory default function
Downloaded From projector-manual.com Acer Manuals
23
5
Push the MENU button anytime to exit the menu and return to the Acer
welcome screen.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
Use the up and down arrow keys to select an option, the left and right
arrow keys to adjust selected option settings, and the right arrow key to
enter a submenu for feature setting. The new settings will be saved
automatically upon exiting the menu.
English
24
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the remote control or control
panel.
•
When the OSD is displayed, use the
keys to select any item in the
main menu. After selecting the desired main menu item, press
submenu for feature setting.
•
Use the
using the
to enter
keys to select the desired item and adjust the settings by
keys.
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "MENU" on the remote control or control panel, the screen will
return to the main menu.
•
To exit OSD, press "MENU" on the remote control or control panel. The
OSD menu will close and the projector will automatically save the new
settings.
Main menu
Setting
Sub menu
Note: Some of the following OSD settings may not be available. Please
refer to the actual OSD of your projector.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
25
Display Mode
There are many factory presets optimized for various types of
images.
•
•
•
•
•
•
•
•
•
•
Bright: For brightness optimization.
Presentation: For meeting presentation.
Standard: For common environment.
Video: For playing video in a bright environment.
Game: For game content.
Education: For education environment.
Movie: For brighter and general movie/video/photo playing.
Dark Cinema: For dark movie content.
Sports: For sport picture.
User: Memorize user's settings.
Wall color
Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
Brightness
Adjust the brightness of the image.
Contrast
Saturation
Tint
•
Press
to darken the image.
•
Press
to lighten the image.
"Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
•
Press
to decrease the contrast.
•
Press
to increase the contrast.
Adjusts a video image from black and white to fully saturated
color.
•
Press
to decrease the amount of color in the image.
•
Press
to increase the amount of color in the image.
Adjusts the color balance of red and green.
•
Press
to increase the amount of green in the image.
•
Press
to increase the amount of red in the image.
Downloaded From projector-manual.com Acer Manuals
English
Color
English
26
Color
Temperature
Mode
Use this function to choose CT1, CT2 (Native), CT3, User mode.
R Gain
Adjusts the red gain for color temperature optimization.
G Gain
Adjusts the green gain for color temperature optimization.
B Gain
Adjusts the blue gain for color temperature optimization.
R Bias
Adjusts the red bias for color temperature optimization.
G Bias
Adjusts the green bias for color temperature optimization.
B Bias
Adjusts the blue bias for color temperature optimization.
Dynamic Black
Choose "On" to automatically optimize the display of dark movie
scenes enabling them to be shown in incredible detail.
Gamma
Effects the representation of dark scenery. With greater gamma
value, dark scenery looks brighter.
Advanced
Ind. Color Management
Adjusts the red, green, blue, cyan, yellow and magenta colors.
Ind. Hue
Adjusts the color balance of red and green.
Ind. Saturation
Adjusts the selected color to be less or more saturated color.
Ind. Gain
Adjusts the selected color's contrast.
Skin Color
Adjusts the skin color.
Brilliant Color
Produces an expanded on-screen color spectrum that delivers
enhanced color saturation for bright, true-to-life images.
White Peaking
Increases the brightness of whites that are near 100%. (video
sources only)
Film Mode
Sets the image optimized to 24-frame True Film mode.
Noise Reduction
Adjusts signal noise reduction."0" means the noise reduction is off,
">0" increase noise reduction.
Black Extension
This ensures optimum black level for each analog source.
Note: "Saturation" and "Tint" functions are not supported under computer
or HDMI mode.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
27
English
Image
Projection
•
Front-Desktop: The factory default setting.
•
Rear-Desktop: When you select this function, the projector
reverses the image so you can project from behind a translucent
screen.
•
Rear-Ceiling: When you select this function, the projector
reverses and inverts the image at same time. You can project from
behind a translucent screen with ceiling mounted projection.
•
Front-Ceiling: When you select this function, the projector
inverts the image for ceiling-mounted projection.
Projection Mode
•
•
Front: The factory default setting.
Rear: Reverses the image so you can project from behind a
translucent screen.
Projection Location
•
Auto: Automatically adjusts projection location of image.
•
Desktop
•
Ceiling: Turns the image upside down for ceiling-mounted
projection.
Aspect Ratio
Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
•
Full: Resize image to fit full screen by width (1280 pixels) and
height (800 pixels).
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
•
L.Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Auto Keystone
Automatically adjusts vertical image.
Manual Keystone
Adjust image distortion caused by tilting projection. (±40 degrees)
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
Sharpeness
Adjusts the sharpness of the image.
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
Downloaded From projector-manual.com Acer Manuals
English
28
H./V. Keystone
Auto V. Keystone
Automatically adjusts vertical image.
H. Keystone
Press the
or
button to adjust image distortion horizontally
and makes a squarer image.
V. Keystone
Press the
or
button to adjust image distortion vertically and
makes a squarer image.
4 Corner
Correction
Select a corner and adjust the position within a limited range. Before
adjusting this function, please adjust H./V. Keystone function to be
closer to a rectangular shape firstly.
H. Position
(Horizontal
position)
•
Press
to move the image left.
•
Press
to move the image right.
V. Position
(Vertical position)
•
Press
to move the image down.
•
Press
to move the image up.
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer’s graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
HDMI Color Range Adjust the color range of the HDMI image data to correct color display
error.
•
Auto: Automatically adjust by information from player.
•
•
HDMI Scan Info
Limited Range: Prosess the input image as limited color range data.
Full Range: Prosess the input image as full color range data.
Adjust the overscan ratio of the HDMI image on screen.
•
Auto: Automatically adjust by information from player.
•
•
Underscan: Always no overscan on HDMI image.
Overscan: Always keep overscan on HDMI image.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
29
Startup Screen
Use this function to select your desired startup screen. If you
change the setting, the changes will take effect when you exit the
OSD menu.
•
Acer: The default startup screen of your Acer projector.
•
User: Use memorize picture from "Screen Capture" function.
Screen Capture
Use this function to customize the startup screen. To capture the
image that you want to use as the startup screen, follow the
instructions below.
Notice:
Before proceeding with the following steps, make sure that the
"Keystone" is set to the default value 0 and the aspect ratio is set
to 4:3. For details, refer to the "Image" section.
•
Change the "Startup Screen" from the default setting "Acer"
to "User".
•
Press "Screen Capture" to customize the startup screen.
•
A dialog box appears to confirm the action. Choose "Yes" to
use the current image as your customized startup screen. The
capture range is the red rectangular area. Choose "No" to
cancel the screen capture and exit the onscreen display (OSD).
•
A message appears, stating that the screen capture is in
progress.
•
When the screen capture is finished, the message disappears
and the original display is shown.
•
The customized startup screen, as shown below, takes effect
when there is a new input signal or when you restart the
projector.
Source Lock
When Source Lock is turned "Off", the projector will search for
other signals if the current input signal is lost. When Source Lock is
turned "On", it will "lock" the current source channel unless you
press "Source" button on the remote control for the next channel.
Closed Caption
Selects a preferred closed captioning mode from CC1, CC2, CC3,
CC4, (CC1 displays captions in the primary language in your area).
Select "Off" to turn off the captioning feature. This function is only
available when a composite video or S-Video input signal is
selected and its system format is NTSC.
<Note> Set your screen aspect ratio to 4:3. This function is not
available when the aspect ratio is "16:9" or "Auto" .
VGA OUT (Standby)
Default is "Off". Choose "On" to enable VGA OUT connection.
Reset
•
Security
Security
This projector provides a useful security function for the
administrator to manage usage of the projector .
Press
Press the
button and choose "Yes" to return the
parameters on all menus to the factory default settings.
to change the "Security" setting. If the security function
is enabled, your must enter the "Administrator Password" first
before changing the security settings.
•
Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to the
"User Password" section for details.
•
If "Off" is selected, then the user can turn on the projector
without password.
Downloaded From projector-manual.com Acer Manuals
English
Setting
English
30
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set
timeout function.
•
•
•
•
•
Press
or
to select the timeout interval.
The range is from 10 minute to 990 minutes.
When the time is up, the projector will prompt the user to
enter the password again.
The factory default setting of "Timeout(Min.)" is "Off".
Once the security function is enabled, the projector will
request user to enter password when switch on the projector .
Both "User Password" and "Administrator Password" can be
accepted for this dialogue.
User Password
•
•
Press
•
•
Press
•
•
•
to setup or change the "User Password".
Press number keys to set your password on the remote control
and press "MENU" to confirm.
to delete character.
Enter the password when you see "Confirm Password"
displayed.
The password should be between 4 and 8 characters long.
If you select "Request password only when plugging the
power cord in.", the projector will prompt the user to enter
the password every time the power cord is plugged.
If you select "Always request password while projector turns
on.", the user has to enter the password every time when the
projector is turned on.
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
•
•
Press
to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
•
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
•
If losing this security card and number, please contact with an
Acer service center.
Lock to user startup screen
Default Lock User Startup Screen is "Off". If lock user startup screen
is "On", users cannot change startup screen anymore and avoid
other users change that arbitrarily. Choose "Off" to unlock startup
screen.
Downloaded From projector-manual.com Acer Manuals
31
LAN
Default is "Off". Choose "On" to enable LAN connection.
<Note> If users want to do LAN control under standby mode,
change VGA OUT (Standby) from Off to On.
LAN IP/Mask
Identify IP and Mask address.
LAN Reset
Reset LAN function.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
LAN
English
32
Management
ECO Mode
Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
High Altitude
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Turn Off Mode
•
•
Instant Off: Shuts down the projector without fan cooling.
•
Standard: Properly shuts down the projector after fan
cooling.
Auto Shutdown
Instant Resume: Resumes the system when the Power button
is pressed again within 2 minutes.
The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 120 minutes)
Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Press the
button and choose "Yes" to turn the lamp hour
counter to 0 hours.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
33
Volume
•
Press
to decrease the volume.
•
Press
to increase the volume.
Mute
•
•
Choose "On" to mute the volume.
Choose "Off" to restore the volume.
Power On/Off Volume
Select this function to adjust the notification volume when
turning the projector on/off.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
Audio
English
34
3D
3D
Choose "On" to enable DLP 3D function.
•
On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards and HQFS format file or DVD with
corresponding SW player.
•
Off: Turn off 3D mode.
3D Format
If the 3D content is not displayed correctly, you can select a 3D
format that suits the 3D content you are viewing and obtain the
best result.
24P 3D
Choose "96Hz" or "144Hz" to compatible with 3D glasses.
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of
left/right image sequence to get the correct image (for DLP 3D).
3D Warning Message
Choose "On" to display the 3D warning message.
Note: It needs correct settings on graphic card 3D application program for
correct 3D display.
Note: The SW players, such as Stereoscopic Player and DDD TriDef Media
Player can support 3D format files. You can download these three players
on web page below,
- Stereoscopic Player (Trial):
http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial):
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note: "3D L/R Invert" is only available when 3D is enabled.
Note: There has reminder screen if 3D still enable when power on projector.
Please adjust setting depended on your purpose.
Language
Language
Choose the multilingual OSD menu. Use the
to select your preferred menu language.
•
Press
to confirm the selection.
Downloaded From projector-manual.com Acer Manuals
or
key
35
How to login in
Open browser and enter the Server IP address by 192.168.100.10 to find below
homepage of acer LAN webpage management. A password is needed to login
in before using.
Select a user. Administrator is with high authority that can process more
operations such as network setting and alert setting. Default password of
administrator is "admin". And User is with normal authority with default
password by "user". Click Login button to enter into homepage with correct
password.
Downloaded From projector-manual.com Acer Manuals
English
Acer LAN webpage management
English
36
Home
Home page shows connection status and you can find three main functions
listed, Control Panel, Networking Setting and Alert Setting.
Note: Control Panel and Networking Setting are only for Administrator
account.
Control Panel
Enduser can control and adjust projector setting value via this page.
Downloaded From projector-manual.com Acer Manuals
37
Enduser can set IP address, group name and password as wish. After change
network configurations or password, projector will reboot automatically after
press "Apply".
Note: Group Name and projector Name must be less then 32 characters.
Alert Setting
Enduser can send mail with error message right away if projector has problem.
Downloaded From projector-manual.com Acer Manuals
English
Network Setting
English
38
Logout
After tap Logout, you will return to login page within 5 seconds.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
39
English
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
1
2
Problem
No image appears
onscreen
Partial, scrolling
or incorrectly
displayed image
(for PC (Windows
2000/XP/Vista/
Windows 7/
Windows 8))
Solution
•
Connected as described in the "Getting Started"
section.
•
Ensure none of the connector pins are bent or
broken.
•
Check if the projector lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
•
•
Press "RESYNC" on the remote control.
For an incorrectly displayed image:
•
Open "My Computer", open the "Control
Panel", and then double-click the "Display"
icon.
•
Select the "Settings" tab.
•
Verify that your display resolution setting is
lower than or equal to WUXGA-RB (1920 x
1200).
•
Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
Verify that the resolution setting is lower than
or equal to WUXGA-RB (1920 x 1200).
•
Click the "Change" button under the
"Monitor" tab.
•
Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to
WUXGA-RB (1920 x 1200).
Downloaded From projector-manual.com Acer Manuals
English
40
3
4
5
6
7
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
The screen of the
notebook
computer is not
displaying your
presentation
Image is unstable
or flickering
Image has vertical
flickering bar
Image is out of
focus
•
•
Press "RESYNC" on the remote control.
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
•
If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•
If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
•
Adjust the "Tracking" to correct it. Refer to the
"Image" section for more information.
•
Change the display color depth settings on your
computer.
•
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
•
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
•
•
•
Make sure the lens cap is removed.
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4],
NEC [Fn]+[F3], Toshiba [Fn]+[F5]
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 3.9 to 39.0 feet (1.2 to 11.9
meters) (SVGA/XGA series) / 3.3 to 32.9 feet (1.0 to
10.0 meters) (WXGA series) / 3.3 to 33.8 feet (1.0 to
10.3 meters) (720p series) / 4.9 to 32.2 feet (1.5 to 9.8
meters) (1080p series) from the projector. Refer to
the "How to Get a Preferred Image Size by Adjusting
Distance and Zoom" section for more information.
Downloaded From projector-manual.com Acer Manuals
41
9
10
11
Image is stretched
when displaying a
"widescreen"
DVD title
Image is too small
or too large
Image has slanted
sides
Image is reversed
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
•
If you play an Letterbox (LBX) format DVD title,
please change the format to Letterbox (LBX) in the
projector OSD.
•
•
Adjust the zoom lever on the top of the projector.
•
Press "MENU" on the remote control. Go to "Image -> Aspect Ratio" and try different settings or press
"RATIO" on the remote control to adjust directly.
•
If possible, reposition the projector so that it is
centered on the screen.
•
Press the "Keystone / " button on the remote
control until the sides are vertical.
•
Press "MENU" on the remote control. Go to "Image -> Auto Keystone" and choose "Off" on the OSD, if
"Keystone" button is not available on the remote
control.
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
Move the projector closer to or further from the
screen.
Downloaded From projector-manual.com Acer Manuals
English
8
English
42
OSD Messages
#
1
Condition
Message
Message Reminder
• Fan Fail - the system fan is not working.
• Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed
to cool down before it may be used. Please check the
following message.
Please also check the dust filters if they are installed. If the
dust filter is clogged with dust, please clean it. Please refer to
"Cleaning and replacing the dust filter" for details.
• Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
Downloaded From projector-manual.com Acer Manuals
43
English
LED & Alarm Definition Listing
LED Messages
Lamp_LED
Temp_LED
Power LED
Red
Red
Red
Blue
Flash ON to
OFF 100ms
Flash ON to
OFF 100ms
Flash ON to
OFF 100ms
--
Standby
--
--
ON
--
Power button ON
--
--
--
ON
Lamp retry
--
--
--
Quick
Flashing
Power off (Cooling state)
--
--
Quick
Flashing
--
Power button OFF
(cooling completed;
standby mode)
--
--
ON
--
Error (thermal failure)
--
ON
--
ON
Error (fan lock)
--
Quick
Flashing
--
ON
ON
--
--
ON
Quick
Flashing
--
--
ON
Message
Input power plug
Error (lamp breakdown)
Error (color wheel fail)
Downloaded From projector-manual.com Acer Manuals
English
44
Cleaning and replacing the dust filters
Cleaning the dust filters
Clean the dust filters after every 1000 hours of use. If they are note cleaned
periodically, they can become clogged with dust, preventing proper ventilation.
This can cause overheating and damage the projector.
2
1
Follow these steps:
1
2
3
4
5
Turn the projector off. Wait for the Power LED to stop flashing then
unplug the power cord.
Allow the projector at least 30 mins to cool down.
Pull out the dust filter. (Illustration #1)
To clean the dust filters, use a small vacuum cleaner designed for
computers and other office equipment. (Illustration #2)
If the dirt is difficult to remove or the filter is broken, please contact your
local dealer or service center to obtain a new filter.
Downloaded From projector-manual.com Acer Manuals
45
Use a screwdriver to remove the screw(s) from the cover, and then pull out the
lamp.
The projector will detect the lamp life. You will be shown a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooling down for at least 30
minutes before changing the lamp.
Warning: The lamp compartment is hot! Allow it to cool down
before changing the lamp.
2
1
3
4
6
5
To Change the Lamp
Turn off the projector by pressing the Power button.
Allow the projector at least 30 minutes to cool down.
Disconnect the power cord.
1
Use a screwdriver to remove the screw from the cover. (Illustration #1)
Push up and remove the cover. (Illustration #2)
2
Remove the screw that secure the lamp module. (Illustration #3)
Pull out the lamp plug. (Illustration #4)
Lift the handle so that it stands up. (Illustration #5)
3
Lift the handle so that it stands up. Pull out the lamp module by force.
(Illustration #6)
To replace the lamp module, use a new lamp and reverse the above steps.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Downloaded From projector-manual.com Acer Manuals
English
Replacing the Lamp
English
46
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
2
m
13 m
m 0
m
1
.9
49mm
mm
8.4
130 mm
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of four-cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Short Rod
Long Rod
Extension Rod
Screw Type A
50 mm length / 8 mm diameter -
Long Cylinder Cap
Allen Key
- For tightening/loosening
Tightening Screw
Medium Rod
Downloaded From projector-manual.com Acer Manuals
47
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Smaller Washer
Large Washer
Projector Bracket
Supports projector and allows for adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Large cylinder cap
Allen Key
Screw Type A
50 mm length/ 8 mm diameter
Downloaded From projector-manual.com Acer Manuals
- For tightening/loosening
Tightening Screw
English
3
English
48
5
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 4 mm diameter screws are enclosed in
the screw pack.
Screw Type B
Washer Type
Diameter (mm)
Length (mm)
Large
Small
4
25
V
V
SCREW SPEC. M4 x 25 mm
82.30 mm
63.81 mm
55.00 mm
Downloaded From projector-manual.com Acer Manuals
85.00 mm
49
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
Projection system
DLP®
Resolution
• P1183/M403/PE-S42/X1183A/D603P/EV-S62T/X114/
X1183/D603/EV-S62/X113/D600/EV-S60/V10S/AS201/
X113H/X113PH/D600D/EV-S60H/V12S/AS211 series:
Native 800 x 600 SVGA resolution
• P1283/M413/PE-X42/V12X/AX316/P1283n/M413T/
PE-X42G/X1283/X1280/D613/EV-X62/X123PH/
D610D/EV-X60H/V13X/AX313 series: Native 1024 x
768 XGA resolution
• P1383W/X1383WH/M423/PE-W42/V12W/AW316/
P1380W/X1380WH/M420/PE-W40/V11W/AW216/
X133PWH/D620D/EV-W60H/V13W/AW313 series:
Native 1280 x 800 WXGA resolution
• H5380BD/E230/HE-720 series: 1280x720 720p
resolution
• P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J
series: 1920x1080 1080p resolution
• Maximum: UXGA (1600 x 1200), WSXGA+
(1680x1050), 1080p(1920x1080), WUXGA-RB (1920
x 1200)
Computer compatibility
IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, VGA, SVGA, SXGA+,
WXGA, WXGA+, WSXGA +
Video compatibility
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p,
576p), SDTV (480i, 576i)
Aspect ratio
Full, 4:3, 16:9, L.Box
Displayable colors
16.7 million colors
Projection lens
• P1183/M403 PE-S42/X1183A/D603P/EV-S62T/X114/
X1183/D603/EV-S62/X113/D600/EV-S60/V10S/AS201/
X113H/X113PH/D600D/EV-S60H/V12S/AS211/P1283/
M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/
X1283/X1280/D613/EV-X62/X123PH/D610D/
EV-X60H/V13X/AX313 series:
F = 2.41 ~ 2.55, f = 2.79~23.99 mm, 1.1x manual
zoom and manual focus
• P1383W/X1383WH/M423/PE-W42/V12W/AW316/
P1380W/X1380WH/M420/PE-W40/V11W/AW216/
X133PWH/D620D/EV-W60H/V13W/AW313 series:
F = 2.5 ~ 2.67, f = 21.80 ~ 23.98 mm, 1.1x manual
zoom and manual focus
• H5380BD/E230/HE-720 series:
F = 2.5 ~ 2.67, f = 21.86 mm ~ 24.00 mm, 1.1x
manual zoom and manual focus
• P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J
series:
F = 2.5 ~ 2.67, f = 21.90 mm ~ 24.00 mm, 1.1x
manual zoom and manual focus
Downloaded From projector-manual.com Acer Manuals
English
Specifications
English
50
Projection screen size (diagonal)
• P1183/M403 PE-S42/X1183A/D603P/EV-S62T/X114/
X1183/D603/EV-S62/X113/D600/EV-S60/V10S/AS201/
X113H/X113PH/D600D/EV-S60H/V12S/AS211/P1283/
M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/
X1283/X1280/D613/EV-X62/X123PH/D610D/
EV-X60H/V13X/AX313 series:
27" (70 cm) ~ 300" (762 cm)
• P1383W/X1383WH/M423/PE-W42/V12W/AW316/
P1380W/X1380WH/M420/PE-W40/V11W/AW216/
X133PWH/D620D/EV-W60H/V13W/AW313 series:
27" (69 cm) ~ 300" (762 cm)
• H5380BD/E230/HE-720 series:
27" (67 cm) ~ 300" (762 cm)
• P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J
series:
42" (106 cm) ~ 300" (762 cm)
Projection distance
• P1183/M403 PE-S42/X1183A/D603P/EV-S62T/X114/
X1183/D603/EV-S62/X113/D600/EV-S60/V10S/AS201/
X113H/X113PH/D600D/EV-S60H/V12S/AS211/P1283/
M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/
X1283/X1280/D613/EV-X62/X123PH/D610D/
EV-X60H/V13X/AX313 series:
3.9' (1.2 m) ~ 39.0' (11.9 m)
• P1383W/X1383WH/M423/PE-W42/V12W/AW316/
P1380W/X1380WH/M420/PE-W40/V11W/AW216/
X133PWH/D620D/EV-W60H/V13W/AW313 series:
3.3' (1.0 m) ~ 32.9' (10.0 m)
• H5380BD/E230/HE-720 series:
3.3' (1.0 m) ~ 33.8' (10.3 m)
• P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J
series:
4.9' (1.5 m) ~ 32.2' (9.8 m)
Throw ratio
• P1183/M403 PE-S42/X1183A/D603P/EV-S62T/X114/
X1183/D603/EV-S62/X113/D600/EV-S60/V10S/AS201/
X113H/X113PH/D600D/EV-S60H/V12S/AS211/P1283/
M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/
X1283/X1280/D613/EV-X62/X123PH/D610D/
EV-X60H/V13X/AX313 series: 50"@2 m (1.95 ~
2.15:1)
• P1383W/X1383WH/M423/PE-W42/V12W/AW316/
P1380W/X1380WH/M420/PE-W40/V11W/AW216/
X133PWH/D620D/EV-W60H/V13W/AW313 series:
series: 60"@2 m (1.55 ~ 1.70:1)
• H5380BD/E230/HE-720 series: 58"@2m (1.55 ~ 1.70:1)
• P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J
series: 61"@2m (1.48 ~ 1.62:1)
Horizontal scan rate
15 - 100 kHz
Vertical refresh scan rate
24 - 120 Hz
Downloaded From projector-manual.com Acer Manuals
51
• P1183/M403/PE-S42/X1183A/D603P/EV-S62T/X114/
X1183/D603/EV-S62/X113/D600/EV- S60/V10S/
AS201/X113H/X113PH/D600D/EV-S60H/V12S/AS211/
P1283/M413/PE-X42/V12X/AX316/P1283n/M413T/
PE-X42G/X1283/X1280/D613/EV-X62/P1383W/
X1383WH/M423/PE- W42/V12W/AW316/P1380W/
X1380WH/M420/PE-W40/V11W/AW216/H5380BD/
E230/HE-720/X133PWH/D620D/EV-W60H/V13W/
AW313/X123PH/D610D/EV-X60H/V13X/AX313
series: 190 W user-replaceable lamp
• P1510/P1515/M450/PE- 840/H6520BD/E240D/HE804J series: 240 W user-replaceable lamp
Keystone correction
±40 degrees
Audio
P1183/M403/PE-S42/X1183A/D603P/EV-S62T/P1283/
M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/
X1283/X1280/D613/EV-X62/P1383W/X1383WH/M423/
PE-W42/V12W/AW316/P1380W/X1380WH/M420/PEW40/V11W/AW216/H5380BD/E230/HE-720/P1510/
P1515/M450/PE-840/H6520BD/E240D/HE-804J: Internal
speaker with 2 W output
Weight
2.5 ~ 2.7 Kg (5.51 ~ 5.95 Ibs)
Dimensions (W x D x H)
314 mm X 223.4 mm X 93.4 mm (12.4" x 8.8" x 3.7")
Digital Zoom
2X
Power supply
AC input 100 - 240 V auto-switching power supply
Power consumption
• P1183/M403/PE-S42/X1183A/D603P/EV-S62T/X114/
X1183/D603/EV-S62/X113/D600/EV-S60/V10S/AS201/
X113H/X113PH/D600D/EV-S60H/V12S/AS211/P1283/
M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/
X1283/X1280/D613/EV-X62/P1383W/X1383WH/
M423/PE-W42/V12W/AW316/P1380W/X1380WH/
M420/PE-W40/V11W/AW216/H5380BD/E230/
HE-720/X133PWH/D620D/EV-W60H/V13W/AW313/
X123PH/D610D/EV-X60H/V13X/AX313:
Normal mode: 235W ± 10% @ 110VAC
ECO mode: 197W ± 10% @ 110VAC
Standby mode < 0.5W
• P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J
series:
Normal mode: 300W ± 10% @ 110VAC
ECO mode: 230W ± 10% @ 110VAC
Standby mode < 0.5W
Operating temperature
0ºC to 40ºC / 32ºF to 104ºF
Standard package contents
•
•
•
•
•
•
•
•
AC power cord x1
VGA cable x1
Remote control x1
Battery x2 (for remote control) (option)
User's guide (CD-ROM) x1
Quick start guide x1
Security card x1
Carrying case x1 (option)
Downloaded From projector-manual.com Acer Manuals
English
Lamp type
52
P1183/M403/
PE-S42/P1283/
M413/PE-X42/
V12X/AX316/
X1183A/
P1383W/
X1280/
X1383WH/
D603P/
M423/PE-W42/
EV-S62T/
V12W/AW316/
X1283/
P1380W/
D613/
X1380WH/
EV-X62
M420/PE-W40/
V11W/AW216/
H5380BD/E230/
HE-720
P1510/
P1283n/
P1515/
M413T/
M450/
PE-X42G
PE-840
H6520BD/
E240D/
HE-804J
Power socket
V
V
V
V
V
V
V
VGA IN
V
V
X
X
X
V
V
VGA IN 1
X
X
V
V
V
X
X
VGA IN 2
X
X
V
V
V
X
X
VGA output
X
X
V
V
V
X
X
3.5 mm audio
jack input 1
X
X
V
V
V
V
V
S-Video
V
V
V
V
V
V
X
Composite
video
V
V
V
V
V
V
V
3.5 mm audio
jack input 2
X
X
V
V
V
X
X
3.5 mm audio
jack output
X
X
V
V
V
V
X
RJ45 LAN
input
X
X
X
X
V
X
X
RS232
X
X
V
V
V
V
X
HDMI /MHL
X
X
X
V
V
V
V
HDMI
X
V
X
X
X
V
V
Mini USB x1
(for firmware
upgrade)
V
V
V
V
V
V
V
English
I/O
connectors
X113/
D600/
EV-S60/
V10S/
AS201/
X114/
X1183/
D603/
EV-S62
X113H/
X113PH/
D600D/
EV-S60H/
V12S/AS211/
X133PWH/
D620D/
EV-W60H/
V13W/
AW313/
X123PH/
D610D/
EV-X60H/
V13X/AX313
Note: Design and specifications are subject to change without
notice.
Downloaded From projector-manual.com Acer Manuals
53
English
Compatibility modes
A. VGA Analog
1
VGA Analog - PC Signal
Modes
VGA
SVGA
XGA
SXGA
QuadVGA
SXGA+
UXGA
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
i Mac DV (G3)
Resolution
640x480
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280x1024
1280x1024
1280x1024
1280x1024
1280x960
1280x960
1400x1050
1600x1200
640x480
640x480
800x600
1024x768
1152x870
1280x960
1024x768
V.Frequency [Hz]
60
72
75
85
120
56
60
72
75
85
120
60
70
75
85
120
70
75
85
60
72
75
85
60
75
60
60
60
66.6(67)
60
60
75
75
75
Downloaded From projector-manual.com Acer Manuals
H.Frequency [KHz]
31.5
37.9
37.5
43.3
61.9
35.1
37.9
48.1
46.9
53.7
77.4
48.4
56.5
60.0
68.7
99.0
63.8
67.5
77.1
64.0
77.0
80.0
91.1
60.0
75.2
65.3
75.0
31.4
34.9
37.9
48.4
68.7
75.0
60.0
English
54
2
VGA Analog - Extended Wide timing
Modes
WXGA
WSXGA+
WUXGA
3
Resolution
1280x768
1280x768
1280x768
1280x720
1280x720
1280x800
*1280x800-RB
*1920x1200
1440x900
1680x1050
1920x1080
(1080P)
1366x768
1920x1200-RB
V.Frequency [Hz]
60
75
85
60
120
60
119.909
60
60
60
H.Frequency [KHz]
47.8
60.3
68.6
44.8
92.9
49.6
101.6
74
59.9
65.3
60
67.5
60
59.94
47.7
74.04
VGA Analog -Component Signal
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
480i
576i
480p
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
*1080p
720x480(1440x480)
720x576(1440x576)
720x480
720x576
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1200
59.94 (29.97)
50(25)
59.94
50
60
50
60(30)
50(25)
23.97/24
60
50
59.94
15.7
15.6
31.5
31.6
45.0
37.5
33.8
28.1
27.0
67.5
56.3
74.04
V.Frequency [Hz]
60
72
75
H.Frequency [KHz]
31.5
37.9
37.5
B. HDMI Digital
1
HDMI - PC Signal
Modes
VGA
Resolution
640x480
640x480
640x480
Downloaded From projector-manual.com Acer Manuals
55
XGA
SXGA
QuadVGA
SXGA+
UXGA
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
i Mac DV (G3)
2
85
120
56
60
72
75
85
120
60
70
75
85
120
70
75
85
60
72
75
85
60
75
60
60
60
66.6(67)
60
60
75
75
75
43.3
61.9
35.1
37.9
48.1
46.9
53.7
77.4
48.4
56.5
60.0
68.7
99.0
63.8
67.5
77.1
64.0
77.0
80.0
91.1
60.0
75.2
65.3
75.0
31.4
34.9
37.9
48.4
68.7
75.0
60.0
V.Frequency [Hz]
60
75
85
60
120
60
119.909
H.Frequency [KHz]
47.8
60.3
68.6
44.8
92.9
49.6
101.6
HDMI - Extended Wide timing
Modes
WXGA
Resolution
1280x768
1280x768
1280x768
1280x720
1280x720
1280x800
*1280x800-RB
Downloaded From projector-manual.com Acer Manuals
English
SVGA
640x480
640x480
800x600
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280x1024
1280x1024
1280x1024
1280x1024
1280x960
1280x960
1400x1050
1600x1200
640x480
640x480
800x600
1024x768
1152x870
1280x960
1024x768
English
56
WSXGA+
WUXGA
3
4
1440x900
*1920x1200
1680x1050
1920x1080
(1080P)
1366x768
1920x1200-RB
60
60
60
59.9
74
65.3
60
67.5
60
59.94
47.7
74.04
HDMI - Video Signal
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
480i
576i
480p
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
*1080p
720x480(1440x480)
720x576(1440x576)
720x480
720x576
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1200
59.94 (29.97)
50(25)
59.94
50
60
50
60(30)
50(25)
23.97/24
60
50
59.94
15.7
15.6
31.5
31.6
45.0
37.5
33.8
28.1
27.0
67.5
56.3
74.04
HDMI - 1.4a 3D Timing
Modes
Resolution
720p (Frame Packing)
720p (Frame Packing)
1080p (Frame Packing )
720p (Frame Packing)
720p (Frame Packing)
1080i (Top and Bottom)
1080i (Top and Bottom)
1080p (Top and Bottom)
1080p (Top and Bottom)
1080p (Top and Bottom)
720p (Side by Side (Half))
1080i (Side by Side (Half))
1080i (Side by Side (Half))
1080p (Side by Side (Half))
1280 x 720
1280 x 720
1920 x1080
1280 x 720
1280 x 720
1920 x1080
1920 x1080
1920 x1080
1920 x1080
1920 x1080
1280 x 720
1920 x1080
1920 x1080
1920 x1080
V.Frequency [Hz] H.Frequency [KHz]
Downloaded From projector-manual.com Acer Manuals
50
60
24
50
60
50 (25)
60 (30)
24
50
60
60
50 (25)
60 (30)
50
37.5
45.0
27.0
37.5
45.0
28.1
33.8
27.0
56.3
67.5
45.0
28.1
33.8
56.3
57
67.5
15k-100kHz
24-120 Hz
165 MHz
C. MHL Digital
Modes
Resolution
VGA
480i
576i
480p
480p_2x
576p
576p_2x
720p
720p
1080i
1080i
1080p
1080p
1080p
640x480
720x480 (1440x480)
720x576 (1440x576)
720x480
1440x480
720x576
1440x576
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
Horizontal scan rate:
Graphic source monitor
Vertical scan rate:
range limits
Max. pixel rate:
V.Frequency
[Hz]
59.94/60
59.94/60
50(25)
59.94/60
59.94/60
50
50
59.94/60
50
60(30)
50(25)
23.97/24
25
29.97/30
15k-50 kHz
24-60 Hz
Digital: 75 MHz
Note: * Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
H.Frequency
[KHz]
31.5
15.7
15.6
31.5
31.5
31.3
31.3
45.0
37.5
33.8
28.1
27.0
28.1
33.8
English
1080p (Side by Side (Half)) 1920 x1080
60
Horizontal scan rate:
Graphic source monitor
Vertical scan rate:
range limits
Max. pixel rate:
English
58
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Downloaded From projector-manual.com Acer Manuals
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby declares that this projector series is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
001
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact the local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
Downloaded From projector-manual.com Acer Manuals
English
Remarque à l'intention des utilisateurs canadiens
English
59
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
Contact Person: Mr. RU Jan, e-mail: ru.jan@acer.com
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921 ,Fax: +39-02 9399-2913
www.acer.it
Declare under our own responsibility that the product:
Product:
Trade Name:
Model Number:
DLP Projector
Acer
DWX1305/DWX1304/DSV1301/DNX1303/H7P1320/D1P1327/D1P1338/
DNX1330/DSV1319/DNX1302/DSV1316/DSV1315/DSV1340/DWX1402/
DNX1401
P1183/M403/PE-S42/X1183A/D603P/EV-S62T/X114/X1183/D603/
EV-S62/X113/D600/EV- S60/V10S/AS201/X113H/X113PH/D600D/
EV-S60H/V12S/AS211/P1283/M413/PE-X42/V12X/AX316/P1283n/
M413T/PE-X42G/X1283/X1280/D613/EV-X62/P1383W/X1383WH/
M423/PE- W42/V12W/AW316/P1380W/X1380WH/M420/PE-W40/
V11W/AW216/H5380BD/E230/HE-720/P1510/M450/PE- 840/
H6520BD/E240D/HE-804J/X133PWH/D620D/EV-W60H/V13W/
AW313/X123PH/D610D/EV-X60H/V13X/AX313
To which this declaration refers conforms to the relevant standard or other standardizing documents:
x
x
x
x
x
x
EN55022:2010 Class B; EN 55024:2010
EN61000-3-2:2006+A1:2009+A2:2009, Class A
EN61000-3-3:2008
EN 60950-1:2006/A11:2009/A1:2010+A12:2011
Regulation (EC) No. 1275/ 2008; EN 62301:2005
EN50581:2012
We hereby declare above product is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive
2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Year to begin affixing CE marking 2014.
_______________________________
RU Jan / Sr. Manager
Regulation, Acer Inc.
Mar. 14, 2014
Date
Downloaded From projector-manual.com Acer Manuals
Acer America Corporation
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110
U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
DWX1305/DWX1304/DSV1301/DNX1303/
H7P1320/D1P1327/D1P1338/DNX1330/DSV1319/
DNX1302/DSV1316/DSV1315/DSV1340/DWX1402
/DNX1401
Machine Type:
P1183/M403/PE-S42/X1183A/D603P/EV-S62T/
X114/X1183/D603/EV-S62/X113/D600/EV- S60/
V10S/AS201/X113H/X113PH/D600D/EV-S60H/
V12S/AS211/P1283/M413/PE-X42/V12X/AX316/
P1283n/M413T/PE-X42G/X1283/X1280/D613/
EV-X62/P1383W/X1383WH/M423/PE-W42/V12W/
AW316/P1380W/X1380WH/M420/PE-W40/V11W/
AW216/H5380BD/E230/HE-720/P1510/M450/
PE-840/H6520BD/E240D/HE-804J/X133PWH/
D620D/EV-W60H/V13W/AW313/X123PH/
D610D/EV-X60H/V13X/AX313
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.
Suite 1500
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
Downloaded From projector-manual.com Acer Manuals