CLUX-16E

HDMI V1.3 1 by 16 Splitter

Operation Manual

CLUX-16E

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.

Copyright Notice

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from

Cypress Technology.

© Copyright 2011 by Cypress Technology. All Rights Reserved.

Version 1.0 March 2011

Trademark Acknowledgments

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

 Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.

 To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to be abused by persons walking on it.

 To protect the equipment from overheating, do not block the slots and openings in the module housing that provide ventilation.

Revision History

Version No

VR0

Date

20110406

Summary of Change

Preliminary Release

Table of Contents

1. Introduction ..................................................................................1

2. Applications .................................................................................1

3. Package Contents ......................................................................1

4. System Requirements ..................................................................1

5. Features ........................................................................................1

6. Specifications ..............................................................................2

7. Operation Controls and Functions .............................................3

7.1 Front Panel .................................................................... 3

7.2 Rear Panel .................................................................... 4

8. Connection and Installation .....................................................5

1. Introduction

The HDMI 1 by 16 splitter is capable of handling HDMI v1.3 and with support for Deep Color video and new lossless compressed digital audio. With extra features like EDID, this splitter is able to handle all your HDMI splitting needs.

2. Applications

• Simultaneous display up to 16 displays

• Advertisement display

• Demonstration display

• TV wall display

3. Package Contents

• HDMI 1 by 16 Splitter

• 5V / 6A Power Adaptor

• Operation Manual

4. System Requirements

Input source equipment such as PC or DVD player with connection cables and output HD monitor or LCD TV with HDMI cable.

5. Features

• Compliant with HDMI 1.3, HDCP 1.1 and DVI 1.0

• Deep Color Video up to 12bits, 1080p@(24/60)Hz

• One HDMI source connect up to sixteen HDMI display simultaneously

• HDCP keysets allows each output to work independently when connecting to a HDMI display

• Splits a HDMI source up to sixteen outputs without signal loss

• Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable

• Supports LPCM 7.1Ch, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio transmission (32-192kHz Fs sample rate)

• Supports a wide range of PC and HDTV resolutions from VGA to UXGA and

480i to 1080p

• HDMI cable distance tested with 1080p 8/12bits resolution the I/O source can run up to 10/10 meters.

1

Note: A.Cable tested with 24AWG using cables of another type may

result in a different operating distance.

B. Cable distance test included the following: PS3 120G and 37”

Samsung 12-bit LCD TV.

C.Figures provided in this manual are reference figures only,

actual figures may depend on source and display use with cable

specification.

• Supports EDID functionality. The unit will detect the first HDMI/DVI output source’s EDID and record in the unit. If the first detected output source is empty it will pass to next source, until the first HDMI/DVI been detected.

When re-plug the power, the system will automatically recover the

EDID.

• Support xvYCC

• Cascade up to 2 layer

2

6. Specifications

TMDS Clock Frequency 225MHz

Input Port 1 x HDMI,

Output Ports 16 x HDMI

EDID STD/TV

HDMI Audio Format

HDMI Cable In

HDMI Cable Out

Power Supply

ESD Protection

PCM2/5.1/7.1, Dolby 5.1, DTS 5.1, DD+, D-TrueHD, DTS-HD

1080p 8-bit or 12-bit (10M)

1080p 8-bit or 12-bit (10M)

5V / 6A DC ( US/EU standards, CE/FCC/UL certified)

Human body model: ± 8kV (air-gap discharge)

± 6kV (contact discharge)

Dimensions(mm) 436 (W) x 120 (D) x 49(H)

Weight(g) 2000

Chassis Material

Silkscreen Color

Metal

Black

Operating Temperature 0°C~40°C / 32°F~104°F

Storage Temperature -20°C~60°C / -4°F~140°F

Power Consumption

Relative Humidity

20W

20 ~ 90% RH (non-condensing)

3

7. Operation Controls and Functions

7.1 Front Panel

1 2 q . Power LED: The green LED will illuminate when the power is connected with AC wall outlet.

w . SYNC: The LED will illuminate in green when the device has detected with sync from source. This LED will also blink once while the power is turned on.

7.2 Rear Panel

1 2 3 4 5 q . EDID Switch STD/TV: This switch allows user to select the function of EDID from TV or from the built-in EDID of the device. By switching the dip switch to TV will allow the source to send out the signal according to

1st HDMI output’s EDID and by switching it to STD will allow the source to send out the signal according to the set EDID recorded in the device.

The default setting is on TV, leave it as it is when the display is properly playing. .

② . SERVICE: This slot is for manufactory service purpose only.

③ . HDMI IN: This slot is to connect with input source equipment such as

DVD/Blue-Ray player with HDMI cable for video and audio input signal.

④ . HDMI Out 1~16: Thess slots are to connect with LCD TV or HD monitor for both video and audio display simultaneously with HDMI cables.

t . DC 5V: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.

4

8. Connection and Installation

DVD or Blu-Ray

HDTV HDTV HDTV HDTV

HDTV HDTV HDTV HDTV

HDTV HDTV HDTV

HDTV HDTV HDTV HDTV

HDTV

5

Acronyms

Acronym

DVI

EDID

HDCP

HDMI

STD

Complete Term

Digital Visual Interface

Extended Display Identification Data

High-bandwidth Digital content protection

High-Definition Multimedia Interface

Standard

A

6

A

CYPRESS TECHNOLOGY CO., LTD.

Home page: http://www.cypress.com.tw

MPM-CLUX16E