Clipsal C-Bus Relay 12 Channel 10A Voltage Free L5512RVF for Smart House Automation

C-Bus 12-Channel
Relay, DIN Rail Series
R
L5112RVF Series
The L5512RVF Series units are C-Bus relay-switching
devices designed to be mounted in electrical switchboards
or similar enclosures. For ease of installation, they are
DIN rail mounted, measuring 12 DIN modules wide.
Twelve independent voltage free relay contacts are provided
for general switching applications
The units include all C-Bus Leaning features, which allow the
units to be programmed without the need for a PC connected
to the system. Alternatively, units can be programmed via a
PC and the C-Bus Installation software.
The Series includes units complete with a0A rates relays for
resistive, inductive or fluorescent loads.
The units consume no current from the C-Bus network during
normal operation. The Series includes units available both
with and without a 200mA C-Bus power supply for powering
other C-Bus devices connected to the network (e.g., C-Bus
Key Input Switches, Touchscreens, PIR detectors, e.t.c)
C-Bus connections are conveniently achieved at the unit
through the use of RJ45 connectors, allowing similar units to
be quickly looped together.
This Series of C-Bus units is a capable of generating
C-Bus clock signal and providing a C-Bus network burden.
Both the clock signal and the burden are selectable
through the C-Bus Installation Software.
Local toggle buttons are included to allow individual channels
to be togged at each unit, as well as via C-Bus commands.
Remote On and OFF facilities are available, permitting all
channels to be turned ON and OFF without C-Bus network
communication.
The unit optically isolates the mains power from the safe
extra low voltage C-Bus network. LED Indicators are provided
to show the status of the C-Bus Network and the status of
the unit.
Like all the other units that make up a C-Bus system, the
DIN rail C-Bus units are Australian designed, developed and
manufactured by Clipsal Integrated Systems Pty Ltd.
clipsal.com/cis
L5112RVF C-Bus Professional Series Dimmer
Product of Clipsal Australia Pty. Ltd.
A member of the Schneider Electric Group.
Head Office
•
Provides twelve independent voltage free relay contacts
in an 12M wide DIN rail enclosure
•
Units available with 10A rated relays (resistive,
inductive or fluorescent loads) and separate units
with relays rated at 10A resistive and 1A fluorescent
•
Units available both with and without 200mA C-Bus
power supply on-board
12 Park Terrace, Bowden
South Australia 5007
PO Box 103 Hindmarsh
South Australia 5007
Telephone
+61 8 8345 9500
Facsimile
+61 8 8346 0845
Internet
E-Mail
www.clipsal.com/cis
cis@clipsal.com.au
CIS Technical Support Hotline:
1300 722 247
Up to 100 units without power supply 10 units with
power supply are permitted on any one single C-Bus
network (255 networks available in a C-Bus installation)
Customer Service Enquiries:
•
Configured via either the C-Bus Installation Software
or via the Learn Enabled Features
1300 2025 56
•
Local ON/OFF toggle buttons allow individual channels
to be manually overridden at each unit
International Sales and Marketing
•
Remote On and OFF facilities permit all channels
to be turned ON or OFF without C-Bus network
communication
1300 2025 25
National Customer Service Facsimile:
International Enquiries
Telephone
Facsimile
E-Mail
+61 8 8269 0587
+61 8 8340 7350
export@clipsal.com.au
New Zealand
Clipsal Industries (NZ) Ltd
Telephone +64 9 576 3403
Malaysia
Clipsal Integrated Systems (M) Sdn Bhd
Telephone +60 3 7665 3555
•
The C-Bus side and output stages are electronically
isolated
•
Incorporates C-Bus Network Status, Mains Power
Status and Load Status indicators
•
Capable of generating a C-Bus clock signal if enabled
China
Clipsal China Limited
Telephone +86 755 8237 5959
•
A network burden is incorporated and is software
selectable
Greece
Schneider Electric AE
Telephone +30 69 4646 3200
•
Logic states (and/or) configurable via installation
software
•
Relay interlocking feature selectable via installation
software
•
•
Incorporates power recovery options to restore loads
‘as was’, ‘off’ or ‘on’
2 x RJ45 sockets are incorporated to facilitate the
C-Bus connection
Singapore
Clipsal Integrated Systems Pte Ltd
Telephone +65 6415 3232/3233
Hong Kong
Clipsal Integrated Systems (HK) Limited
Telephone +852 2487 0261
India
Schneider Electric India Pvt Ltd
Telephone +91 11 5159 0000
Indonesia
PT Clipsal Graha Nusa
Telephone +62 21 630 6430
Korea
Clipsal Korea Co. Ltd
Telephone +82 549 5550
Pakistan
Clipsal Pakistan (Pvt) Ltd
Telephone +92 21 506 7278
•
Supplied with a 300mm C-Bus Category 5 patch lead
complete with pre-terminated RJ45 connectors
•
The output terminals accommodate 2 x 1.5mm2 or
1 x 4.0mm2 cable
•
EMC Complaint to meet the requirements for marking
with the CE and RCM marks
Taiwan
Clipsal (Taiwan) Co Ltd
Telephone +886 2 2558 3456
•
Incorporate magnetically latching relays
•
Capable of being programmed via the installation
software without the need for a mains connection
Thailand
Clipsal Thailand Ltd
Telephone +66 2 952 5338-42
•
Draws 18mA when being programmed and no
mains connection is made
•
When a mains connection is made, then the unit
does not draw any current from C-Bus
•
Dimensions: W=215mm, H=85mm, D=65mm
•
Weight: 600g.
Philippines
Clipsal Phillipines Inc.
Telephone +632 683 0275-78
South Africa
Clipsal South Africa (Pty) Ltd
Telephone +27 11 314 5200
United Arab Emirates
Clipsal Middle East
Telephone +971 6 5570 777
United Kingdom
Clipsal Integrated Systems
C/o Schneider Electric
Telephone +44 870 608 8 608
Vietnam
Clipsal - VTEC
Telephone +848 856 3002
Patented
Clipsal Australia Pty Ltd reserves the right to change specifications,
modify designs and discontinue items without incurring obligation and
whilst every effort is made to ensure that descriptions, specifications and
other information in this catalogue are correct, no warranty is given in
respect thereof and the company shall not be liable for any error therein.
© Clipsal Australia Pty Ltd.
The identified trademarks and copyrights are the property
of Clipsal Australia Pty Ltd unless otherwise noted.
CLIPCOM 13731 Dec 2007
IS3-005
•
O/N 13731