1.The above picture shows the
headrest DVD and accessories.
piease select the suitab e hooks for
insrallation. Il^e oeno.5trar on is
for long hooks
2.Above shows the car seat, please
remove the pillow ard pJl il aside.
3.Above shows the photo when the
pillow removed.
the bottom of the car seat and get
through from the under side of the
two plastic washers.
5.Fit hooks spares and the host
DVD with screws (please select the
right space between the two hooks
and fii)
6.lnsert the two hooks into the
underside ofthe two p astic washers
7.When the hooks compietely
insert into the washers, please spin
the two drivepipes slightly and aim
at the holes of t1e plasr.c washers.
9. nsert the headrest po es nto the
ho es from the two driveplpes.
10.Please I nk the wi.es accordingly,
and press lhe pi .ow. (whe1 the wires
come out excessively, please fill in
the wires to the car seat)
1 1 .Use a screw driver to flt the
screws on the driverpipes.
14.L nk the wire power and the
l5.Above shows the photo after
installation.
(When the DVD and mon;tor need to be
connected together, please connect the
AUX i nputs of the two devices)
13.Press the DVD toward the pi low
and adjust to proper anqles as to
facllitate programs watching.
4.Putthe powerwi.e AUXl nput
(red) and AUX output {black) into
cigarette lighting wire to supply
power with the devlce.
B.Please assemble the four plastic
parts and put them into the two
drivepipes separately.
1
2.
Cove r the screws
7 lnch Headrest With Pillow TFT LCD Monitor DVD
INSTRUCTIONS
Please read these instructions carefully before using this unit
E078
GONTENTS
Features
' Built-in DVD
l.Features
2
2.Front Panel Gontrols
3
3.lnstallation
5
..:............
4.Remote Control Operation
5.System Operation ......
6.Dise Compatibility
T.Handling Discs
S.Safety Precautions -
g.Troubleshooting
l0.lnstallation
Leather replacement.
1 2.Tech n ical Specifications
11
.
7
8
9
10
10
11
12
13
14
Ptayer compatibre with DVD/VCD/Mp3 /cD-R/cD-RW/
DIVX
' LED backlit paners for exceptionar picture quarity, high efficiency and
long life
' cover colors easiry interchangeabre between brack, grey and tan to
matc.h vehicle interior (all 3 colors included)
. Pole distance adjustable trom 4"-7" apart
for universal fit
' Free tilt mechanism ailows for adjustment to optimar viewing angre
. Mini USB port and SD/MMC card slot for
music, image and video files
. Automatically selects pAL/NTSC/
SECAM system
. Front 3.5 mm jack for headphones
.2 AIV inputs
One 3.5 mm front input jack
One wired RCA input
. 1 AIV RCA output
. Wireless remote control
. Built-in dual-channel speaker
. Built-in FM transmitter
. Built-in dual channel lR transmitter
Ch A: 2.3MHz(left)-2.8MHz(right)
Ch B: 3.2MHz(teft)-3.8MHz(right)
. D t"; fla' 1r o:o; TFT LcD disptay
. Resorution :E480(H) x 3(RGB)
X 234(W) ; Eaoolx 1 x 3(RGB)
. Number of Pixels: 336,960
. Brightness: 400 cd/m'?
. Power supply: DC +12V (10.6V-15.8V)
.
. Power consumption: 12W
. Operating temperature:-1OoC to +6OoC.
. Dimensions :
11" x 6" x 14
Ta',
. Weight: 3.7 lbs.
. Support 32-bit games,can be downloaded
from the website
http://www.native32.com/,'smf"
format to USB i SD and play.
X
480(W)
Front Panel Controls
Power /Source select
Menu
Play/Stop
Prev
Next
-Ad stment
+
mmmmmffim
lR Transmitter
Cover
\
=,
Laser
DVD Driver
\\t
o:-o
0a
lnstallation
First check fo make sure the appearance and installation specifications
match with the subject vehicle. Before you begin, choose the right
accessories and right tools
The headrest DVD player has an AV input port and an output. The input port
can connect with other sources such as GPS, TV Box, Game TV-Box etc.
The AV output port can connect to other displays.
lnstallation steps:
Step 1, Remove original Pillow
Step 2. Choose the correct installation steel tube size, to ensure proper fit'
Step 3..Connect the power cord and the Video cable.
Step 4. Properly position the pillow.
WW
2mm steel tube
Note.:
The appearance and installation specifications are not suited for all vehicles.
Please choose the correct appearance and installation specifications.
='cc
tt'
SS
8
E
q3
6=
cO
ooo
Connecting Power Line
12mm diameter steel tube
Remote controller
User's manual
2
1
1
o=
CE
ou>><
--ooo
=?aaB
q5
P3
===
5E
EC
_J
c*
L
Remote Control Operation
System Operation
.'****- 20
19
18
I
I
6
7
8
9
^*14
10-*****-
*****
12**-**
11
13
,l
1.Mute
2.Number selection
3.Source selection
4.USBiSD/DISC Selection
5. Direction Buttons
6. Play/Pause
13.LCD AV Select
14.DVD Menu
1S.TFT Menu
16.Title Menu
17.Stop
18.Enter
T.Volume
19.Audio
8.9:Next/Previous
1 0.11 :Fast Rewind/Forward
20.Angle
21.Power
12.Repeat selection
I
1)Choose the LCD selection by pressing the "SOURCE', button on the
remote control.
2)Pressing "TFT MENU " key to enter menu below .
3)PressIl][v] toselect an item.
4)Press[.1 ][ >] to adjust.
5)When the FM transmitter is turned on,there are B channels to choose
From:87.7. 88.1. 88.5. 88.9. 106.7. 1O7.1- 107.5. 107.9. Tune your
radio to the corresponding frequency .
Safety Precautions
Compatibility
-
This device is designed to be operated with a DC 12V grounded system'
Do not allow any foreign substance to get into the disc slot.
The device may not work in high or low temperatures. Stop using the
device until the temperature returns to a normal level. Operating
temperature range: 1 4'F- 122"F)
Cleaning
Disc type
5 inches (12cm)
Video CD
5 inches (12cm
Audio CD
5 inches (12cm)
Approx. 1 33 minutes(SS/SL)
Approx.242 minutes(SS/DL)
-
Approx.266 minutes(DS/SL)
Approx .484 minutes(DS/DL)
*SS:Single Sided,DS:Double SiCed,
SL:Single Layer,DL :Dual L
Approx.74 minutes
-
5 inches (12cm)
-
Approx.74 minutes
WAV: music file
MPG: motion picture file
VOB: DVD file
JPG: picture file
Handling Discs
-
-
-
-
disc.
After playing discs, you are advised to place them inside their original cases to
prevent any damage to them.
bo not expose discs to direct sunlight, high humidity or high temperatures for long
- periods of time. Discs may deform.
- "Do not write on the disc's signal surface. A sharp pen or ink may cause damage to
the surface of the disc.
The sound quality may vary among discs depending on their recording methods.
-
-
When turning the heater on in the car during a rainy or humid day,
moisture may condense on the optical lens. lf this occurs, the device
may not read the disc and will not function properly. ln such a case, it is
advised to remove the disc from the device until the unit is dried'
lnstallation and RePairs
Dust particles, scratches or twisting may cause sound disruption, poor sound quality
or poor screen image during PlaY.
use a soft cloth to gently clean fingerprints and dust on the data surface (polished
side) of the disc
Never use anti-static spray or liquid, benzene, thinner or other chemical solvents
to clean discs. Such chemical solvents may damage the plastic surface of the
When cleaning the device, do not make contact with water. The device
may get damaged.
Since chemical solvents may damage the surface of the unit, do not use
them for cleaning.
Use a clean and dry cloth to clean'
Condensation
Mp3 : music file
CD.ROM
t
Please install and operate the device as specified by this manual. lf you
cannot install the device correctly yourself, take it to an authorized
dealer.
Do not open the device by yourself for repairs. lf the device does not
work properly, take it to an authorized dealer. (lf you disassemble the
unit, you will void the warrantY).
Video/Audio Trouble
-
When driving on a rough road the unit is prone to severe shaking and
may experience video/audio problems. This is inevitable.
Troubleshooting
Fault
No power
lnstallation
Reason
Resolution
Yellow wire should be connected to
1 2v + source; red wire should be
connected to the ACC; black wire
should be connected to the ground
Connect power
correctly
Fuse burned out
Change fuse
Power cable is
disconnected
Connect power
correctly
NoAV input
Check lnPut video
Video lines disconnected
Reconnect
video lines
Battery is blocked bY
orotective paper
Remove paper
Pointed in wrong direction
Point remote to
remote sensor
No power
Change batteries
Bad disc
Replace disc
Disc loaded incorrectlY
Re-insert disc
Disc is dirty
Clean disc
Fast forward/backward
This is normal
No picture
Remote
does not
work
Can't play Disc
Distortion
1. Remove the original pillow in the car.
2. lnstall the pillow of this monitor. Adjust the steel tube in or out
(max. interval: Tinch;min interval:4 inch) according to the
interval between pillow holes so that the interval between steel
tubes of the pillow monitor coincides with that between steel
tubes of the original Pillow.
outward.o,,on fCl&
lnward motion
3.Forward and back tilt angle adjustment
4.Wiring diagram
The circuit connection of the pillow monitor is very simple.
As shown in Fig. Connect the +12V power of the
sound system(red line to +,black line to ground),and then
connect the video signals.
-12-
Tech
Leather replacement
1.Hold down the 2 buttons simultaneously, and
removed the screen. Disconnect the cable.
n
ical Specifications
Panel
TFT LCD
Screen Size
E 7":E
Pixel
Temperature
Back light
Brightness
Color system
Disc Formats
Resolution
S/N
2. Remove the leather.
lsolation
Audio lnput/Output
Video lnput/Output
Remove
@
I
PowerSupply
Power
)roduct Dimensionr
Net Weioht
8" (16:e)
f]480(H) X 234(W)
Operation:14'F
-
;E800(H)x480(W)
122"F;Storage:-22 "F -167 "F
LED
400 cd
/m'z
PAL/NTSC
DVD, VCD. CD. iTP3. CR_R. CD-RW. DVD_R. DVD-RW.
>500
>90 dB
>65 dB
1.6Yt20o/o
1V p-p t20%
DC 12V
<
12W
11"
x6" x 14/q
3.7 lbs
Note:
3.Replace the leather with the matching
color cover.
4.Connected the cable,lock the monitorls buttons
into position and push it in place to lock.
- 13-
The design and specifications are subject to change without notice
.
DVCD
lnstallation
First check fo make sure the appearance and installation specifications
match with the subject vehicle. Before you begin, choose the right
accessories and right tools
The headrest DVD player has an AV input port and an output. The input port
can connect with other sources such as GPS, TV Box, Game TV-Box etc.
The AV output port can connect to other displays.
lnstallation steps:
Step
Step
Step
Step
1. Remove original Pillow
2. Choose the correct installation steel tube size, to ensure proper fit.
3. Connect the power cord and the Video cable.
4. Properly position the pillow.
WW
1
35-1
2mm steel tube
85mm-
Note;
The,appearance and installation specifications are not suited for all vehicles.
Please choose the correct appearance and installation specifications'
ou>><
L
L
o'
ooo SS
^
Connectinq Power Line
12mm diameter steel tube
Remote controller
User's manual
1
2
1
1
9
:
E
14.
+(o_
J
Or
cO
E:
CE
+c
--ooo
=?aar
tE q5
-+c
==*
roc
='.o