Sandwich and Panini Grills Foodservice Equipment Natural Aluminum Surface:

Foodservice Equipment
Job
Item#
Sandwich and Panini Grills
Standard Features:
• Adjustable from paper
thin to 2” thickness
• Top locks at desired
thickness
• Use top & bottom or
bottom heat only
• Grease receptacle
• Handles for portability
• Bottom cook surface
12-7/8” D x 14-1/16” W
• Top cook surface
12” D x 13-1/16” W
A710SA674
A710PA674
A710674
Model Shown: May ship UPS
Application:
Toastmaster A710 Series Sandwich
and Panini grills are designed to
uniformly grill both sides of a
sandwich at the same time. To add to
the grills’ versatility, the bottom grill
can be heated alone.
Capacity:
Grills up to 4 sandwiches at one time.
General Information:
Light-duty elecric grill with
simultaneous top and bottom grilling
eliminates flipping sandwiches.
Overall dimensions are:
17” W x 18-1/2”D x 11 3/4” H
Neoprene feet are provided.
• Models A710 and A710S feature
smooth upper and lower grill plates.
• Model A710P features grooved
upper and lower plates.
Controls:
Controlled by an adjustable
thermostat with a range of 150o F to
450o F with an “OFF” position. A three
position switch is provided to turn the
unit off, operate the bottom grill only,
or operate both top and bottom grills.
The top grill can be adjusted from
paper-thin to thick sandwich heights
and locked into place to provide
consistent result.
Construction:
Construction is of formed and welded
sheet steel. Grill plates are of cast
aluminum. An 8 oz. capacity grease
receptacle at the rear is easily
removable for emptying and cleaning.
Model A710 features grill plates with a
natural aluminum finish. Models
A710S and A710P feature grill plates
with a DuPont SilverStone Supra®
nonstick flouropolymer coating.
Electrical:
Total rated input is 1.65 KW (0.65 KW
top element, 1.0 KW bottom
element). Available in 120V, 208V or
240V. All units are single-phase and
are equipped with a 3 foot (914mm)
cord and NEMA plug. Refer to the
electrical specifications table on the
reverse side of this sheet.
Heating:
A preformed tubular heating element
is clamped beneath the grill on each
of the top and bottom grill plates.
Coating:
Model A710 features grill plates
with a natural aluminum finish.
Models A710S and A710P feature
grill plates with a DuPont
SilverStone Supra® nonstick
fluoropolymer coating.
SilverStone Supra® is the most
durable nonstick system of the
DuPont SilverStone® family of
nonstick coatings. The coating was
designed for small electric
appliances and top-of-range
cookware, and works well for a
variety of commercial food
processing applications where
resistance to heat and abrasion
are important. It three-coat
application system complies with
FDA regulations governing direct
food contact.
SilverStone Supra® is a
registered trademark of DuPont.
All rights are reserved.
Warranty:
Warranted for one year covering
parts and labor. Call factory for
warranty authorization.
Toastmaster ® 5600 13th Street, Menominee, MI 49858 • www.toastmastercorp.com
Toll Free: 1-800-338-9886 • Telephone: 1-906-863-4401 • Fax: 1-906-863-5889
Sandwich and Panini Grills - Models A710, A710SA & A710PA
Natural Aluminum Surface: A710674, A710663, A710666
Non-Stick Coated Surface: A710SA674, A710SA663, A710SA666
Grooved Surface: A710PA674, A710PA663, A710PA666
Sandwich and
Panini Grills
Smooth Natural Aluminum Surface
Model Number
A710674
A710663
Griddle Type
Smooth
Smooth
Smooth
Natural Aluminum
Natural Aluminum
Natural Aluminum
17”
17”
17”
Surface
Sandwich and Panini Grills - Models A710, A710SA & A710PA
Width
A710666
Depth
18-1/2”
18-1/2”
18-1/2”
Height
11-3/4” Closed
23” Open
11-3/4” Closed
23” Open
11-3/4” Closed
23” Open
Shipping Weight
39 lbs.
39 lbs.
39 lbs.
Supply
(1 Phase)
120 V
208 V
240 V
120 V - 13.8
208 V - 7.9
240 V - 6.9
1.65 KW
1.65 KW
1.65 KW
120VNEMA 5-20P
208VNEMA 6-15P
240VNEMA 6-15P
Current
Draw (Amps)
Heat Input
Factory
Installed
Cord & Plug
181/2”
(470mm)
135/16”
(338mm)
21/8”
(54mm)
Smooth Non-Stick Coated Surface
Model Number
A710SA674
Griddle Type
Surface
A710SA663
A710SA666
Smooth
Smooth
Smooth
Non-Stick Coating
Non-Stick Coating
Non-Stick Coating
Width
17”
17”
17”
Depth
18-1/2”
18-1/2”
18-1/2”
Height
11-3/4” Closed
23” Open
11-3/4” Closed
23” Open
11-3/4” Closed
23” Open
Shipping Weight
39 lbs.
39 lbs.
39 lbs.
Supply
(1 Phase)
120 V
208 V
240 V
120 V - 13.8
208 V - 7.9
240 V - 6.9
Current
Draw (Amps)
TOP
113/4”
(298mm)
123/8”
(314mm)
5 8”
/
(16mm)
Heat Input
Factory
Installed
Cord & Plug
1.65 KW
1.65 KW
1.65 KW
120VNEMA 5-20P
208VNEMA 6-15P
240VNEMA 6-15P
17”
(432mm)
FRONT
Grooved Non-Stick Coated Surface
Model Number
Griddle Type
Surface
Width
A710PA674
A710PA663
Grooved
Grooved
A710PA666
Grooved
Non-Stick Coating
Non-Stick Coating
Non-Stick Coating
17”
17”
17”
24”
(610mm)
Depth
18-1/2”
18-1/2”
18-1/2”
Height
11-3/4” Closed
23” Open
11-3/4” Closed
23” Open
11-3/4” Closed
23” Open
Shipping Weight
39 lbs.
39 lbs.
39 lbs.
Supply
(1 Phase)
120 V
208 V
240 V
120 V - 13.8
208 V - 7.9
240 V - 6.9
1.65 KW
1.65 KW
1.65 KW
113/8”
(298mm)
120VNEMA 5-20P
208VNEMA 6-15P
240VNEMA 6-15P
18”
(457mm)
Current
Draw (Amps)
Heat Input
Factory
Installed 36”
Cord & Plug
NEMA
5-20P
NEMA
6-15P
65/8”
(168mm)
SIDE
INTENDED FOR COMMERCIAL USE ONLY. NOT FOR HOUSEHOLD USE.
Toastmaster, in line with its policy to continually improve its product,
reserves the right to change materials or specifications without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements,
additions, or replacements for previously purchased equipment.
Toastmaster ® 5600 13th Street, Menominee, MI 49858 • www.toastmastercorp.com
Toll Free: 1-800-338-9886 • Telephone: 1-906-863-4401 • Fax: 1-906-863-5889
33/8”
(86mm)