HES Lite
TX and RX Extender Set
Part No. 310021
Operating Manual
TRIAX - your ultimate connection
Operating Manual
•
The illustrations in this operation manual are for explanation and guidance purposes only.
Dear Triax customer
Thank you for purchasing the TRIAX HES Lite TX and RX Extender Set.
To ensure safety and many years of trouble-free operation, please read the Important Safety
Precautions carefully before using this product.
Contents
Safety Precautions
3
Front Panel View
5
Introduction
4
Rear Panel View
5
Applications
4
Specifications
Package Contents
4
D-Sub 9 Pin Definitions, Pin Layout6
System Requirements
4
Connections and Installations
7
Features
4
Acronyms
7
2
6
Important Safety Precautions
•
Cleaning - Unplug the AC power from the mains supply before cleaning the product.
Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
•
Use a soft damp cloth to gently wipe the product when it is dirty. To protect the product,
do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the casing
of the product.
•
Water and moisture - Do not expose the unit to wet or damp conditions.
•
Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
•
Ventilation - The vents and other openings in the casing are designed for ventilation.
Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
•
Heat sources - Keep the product away from heat sources such as direct sunlight, radiators, heaters, stoves and other heat-generating products (including amplifiers).
•
To prevent fire, never place any type of candle or naked flames on the top or near the product.
•
Servicing - Do not attempt to service the product yourself. Removing covers can expose you to
electric shock and other dangerous conditions. Maintenance should be performed by the
manufacturer or by a suitably qualified person.
3
Introduction
The HDMI/DVI over single CAT5e/6 with IR transmitter and receiver set can make your home
or office set-up more efficient and easy to use. Uncompressed video and audio can be
transmitted up to 70 meters with the added benefit of controls through the built-in IR ports
(HDMI only). This family design of HDBaseT™ technology allows a full usage of HDMI and
controls over CAT5e/6 cable.
Applications
•
•
•
•
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Package Contents
•
•
•
•
•
•
HDMI/DVI to CAT5e/6 with IR x 1
CAT5e/6 to HDMI with IR x 1
Emitter x 1 (HDMI only)
IR Digital Eye x 1 (HDMI only)
5V 2.6A DC Power Adaptor x 2
Operation Manual
System Requirements
•
Input HDMI source equipment such as DVD/Blu-Ray player/PC output display with HDMI input socket and connection cables of HDMI and CAT5e/6.
Features
•
•
•
•
•
•
•
•
•
•
HDMI 1.4 with 3D, 4K x 2K support, HDCP and DVI compliant
Complies with the HDBaseT-Lite class
Enables HDMI 1.4 (including HDCP), over a single CAT5e/6 up to 70m
Full HD support: 1080p@60Hz@36 b/pixels, 3D over 60m and 4Kx2K over 40m with CAT5e/6 cable
HDMI input up to 15 meters with 8bits resolution or 10 meters with 12bits resolution
HDMI output up to 15 meters with 8/12bits resolution
Supports HDCP repeater and CEC bypass
Supports uncompressed video 1080p, 60Hz, 36bits
Audio supports LPCM 7.1CH, Dolby TrueHD, Dolby digital Plus and DTS-HD Mater Audio transmission
Compact size with stylish design
4
Transmitter Front and Rear View
IR IN
1
2
3
4
5
1. IR Out:
Plug the IR Emitter included in the package for IR signal sending from the receiver side
2. HDMI In:
Connect with source equipment such as DVD/Blu-ray player 3. IR In:
Connect the supplied IR Digital Eye for IR signal reception. Ensure that the remote being used is within the direct line of sight of the IR Digital Eye
4. DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. Green LED will illuminate.
5. CAT5e/6 OUT: Connect to the receiver unit with a single CAT5e/6 cable for transmission of all data signals. Amber light will illuminate to confirm data connection.
Receiver Front and Rear View
IR OUT
1
2
3
4
5
1. DC 5V:
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet. Green LED will illuminate.
2. CAT5e/6 IN: Connect the transmitter unit with a single CAT5e/6 cable for transmission
of all data signals. Amber LED will illuminate to confirm data connection.
3. IR IN: Connect the supplied IR Digital eye for IR signal reception. Ensure that the remote being used is within the direct line of sight of the IR Digital eye
4. HDMI OUT: Connect to a HDMI equipped TV/monitor for display of the HDMI input
source signal
5. IR OUT: Plug the IR Emitter included in the package for IR signal sending from the transmitter side.
5
Transmitter and Receiver Top View
1
1
1. LINK LED:
When both the transmitter and receivers are powered up the Green power LED will illuminate. When the transmitter and receiver are connected via the CAT5e/6 cable, the amber Data Link LED will illuminate and confirm the data connection.
IR Pin Assignment
1
2
IR Emitter Signal
3
NC
1
2
IR Signal
3
6
Power 5V
Power 5V
Grounding
Specifications
Video Bandwidth
300MHz/9Gbps
Transmitter
Inputs
1 x HDMI
Outputs
1 x RJ45, 1 x IR Emitter
Receiver
Inputs
1 x RJ45, 1 x IR Digital Eye
Outputs
Weight (g)
1 x HDMI
Human Body Model: ± 8kV (air-gap discharge),
± 4kV (contact discharge)
2 x 5V/2.6A DC for Transmitter and Receiver (US/EU standards,
CE/FCC/UL certified)
55(W) x 82(D) x 22.5(H)/each/HDMI
60(W) x 82(D) x 22.5(H)/each/DVI
56/TX, 64/RX (HDMI), /TX, /RX (DVI)
Chassis Material
Plastic
Silkscreen Printing
Grey
Operating Temperature
0°C ~ 40°C/ 32° ~104°
Storage Temperature
-20°C ~ 60°C/ -4° ~140°
Relative Humidity
20~90% RH (non-condensing)
3W/TX, 5.5W/RX (HDMI)
3W/TX, 5W/RX (DVI)
ESD Protection
Power Supply
Dimensions (mm)
Power Consumption
7
Connections and Installation
DC PSU or USB
to Power RX
IR Digital Eye
IR 1 Emitter
(70m)
HES Lite TX
HES Lite RX
Acronyms
Acronym
Complete Term
CAT5e
Category 5 Cable
CAT6
Category 6 Cable
CEC
Consumer Electronics Control
DVI
Digital Visual Interface
HDCP
High-Bandwidth Digital Content Protection
HDMI
High Definition Multimedia Interface
IR
Infrared
8
Issue 2
*Triax reserves the right to change the specifications without prior notification
Download PDF
Similar pages
StarTech.com WALLBOX1WH
Cables Direct TC-500E networking cable
Cables Direct Cat5e 24, 0.5u
Cables Direct 8m Cat5e
HES Lite