Hawk-Woods NP1 Audio Power Adaptors

NPA-XLR / NPA-SQN / NPA-90
Hawk-Woods NPA Power Adaptors are the most basic of all the power
adaptors we manurfacture.
They are suitable for most mixers or DAT recorders and are often used
as a charge adaptor.
DIMENSIONS & WEIGHT:
Length:
Width:
Depth:
Weight:
7.5cm
5.0cm
3.0cm
75g
NPA Adaptors come with either a XLR(F) connector, SQN(Hirose) connector or a BP-90 (2.1mm) plug
depending on the model.
The NPB range of adaptors form part of our extensive range of adaptors for sound recordists. No more
expensive throw away batteries!
Using a Hawk-Woods' Power Adaptor and an NP-29 battery you can now power a sound mixer all day.
All fuses on our NPB adaptors are rated to 1.1A (continuous hold
current) and if the current should rise to about 1.7A or more then the
output will go high resistance rendering the adaptor safe until such
time as the excessive load is removed.
SPECIFICATIONS:
Outputs :
Fused:
2 / 4 Hirose (Switched)
Self-Resetting Devices
DIMENSIONS & WEIGHT:
Length:
Width:
Depth:
7.5cm
5.0cm
3.0cm
Weight:
110g
These adaptors are supplied fully loaded with two or four switched
auxiliaries (Hirose Connectors). Outputs are fused and a low battery
voltage indicator is fitted.
NPB Adaptors come with either a XLR(F) connector or a SQN(Hirose)
connector depending on the model.
Briscall House, Wotton Road, Kingsnorth Industrial Estate, Ashford, Kent, TN23 6LW, United Kingdom.
Tel: +44 (0) 1233-638715 Fax: +44 (0) 1233-638747
Email: Sales@hawkwoods.com Web Site: www.hawkwoods.com
Hawk-Woods
NPB-XLR2S / NPB-XLR4S / NPB-SQN2S / NPB-SQN4S
NPC-XLR2S / NPC-XLR4S / NPC-SQN2S / NPC-SQN4S
The NPC range of adaptors form part of our extensive range of
adaptors for sound recordists and offers an alternative format to the
NPB style. No more expensive throw away batteries!
Using a Hawk-Woods' Power Adaptor and an NP-29 battery you can
now power a sound mixer all day and more!
Hawk-Woods
All fuses on our NPC adaptors are rated to 1.1A (continuous hold
current) and if the current should rise to about 1.7A or more then the
output will go high resistance rendering the adaptor safe until such
time as the excessive load is removed.
SPECIFICATIONS:
Outputs :
Fused:
2 / 4 Switched Hirose
Self-Resetting Devices
DIMENSIONS & WEIGHT:
Length:
Width:
Depth:
7.5cm
5.0cm
3.0cm
Weight:
118g
These adaptors are supplied fully loaded with either two or four switched auxiliaries (Hirose
Connectors). Outputs are fused and a low battery voltage indicator is fitted.
NPC Adaptors come with either an XLR4 (Female) connector or a SQN (Hirose Male) connector fitted
to a 45cm cable normally used for powering the sound mixer.
NPR-XLR4S / NPR-SQN4S
The Hawk-Woods' range of powering adaptors have become the industry standard. Building on this
success and to allow the use of Lithium-Ion NP1 batteries for powering voltage sensitive equipment
like radio-mic’s, the NPR range of power adaptors offer fully regulated auxiliary powering to overcome
concerns with over-voltage.
SPECIFICATIONS:
Outputs :
Fused:
4 Switched Hirose (Regulated to 12v (9.6v Optional))
Self-Resetting Devices
DIMENSIONS & WEIGHT:
Length:
Width:
Depth:
7.5cm
5.0cm
3.0cm
Weight:
122g
The NPR has all the functionality of both the NPB/C adaptors and with the addition of regulated
outputs became the preferred choice allowing the use of any chemistry NP1.
Briscall House, Wotton Road, Kingsnorth Industrial Estate, Ashford, Kent, TN23 6LW, United Kingdom.
Tel: +44 (0) 1233-638715 Fax: +44 (0) 1233-638747
Email: Sales@hawkwoods.com Web Site: www.hawkwoods.com
NPU-XLR4S / NPU-SQN4S **NEW**
This latest offering in power adaptors is the in response to direct
customer feed.
The NPU is the Ultimate adaptor designed to be used with the battery
standing on its end with the adaptor on top.
When used in this orientation the switches are on the top for easy access, powering “on” LED's are
also fitted indicating the current status of the outputs.
These outputs are fully regulated and a voltage selector switch is provided for the user to select
directly either 9.6 or 12 volts depending on specific equipment being
powered.
All outputs are pointing down in to the bag for easy distribution of
power, auxiliaries are fused at 1.1 Amps per pair and will hold currents
up to 1.5A before folding back to protect against over current.
SPECIFICATIONS:
Outputs :
Fused:
Regulated:
Indication:
DIMENSIONS & WEIGHT:
Length:
Width:
Depth:
Weight:
4 Hirose - Switched
1.1A Self-resetting
9.6 to 12v - Switched
Green LEDs = Power
Red LED
= LVI - 11.4v
7.5cm
5.0cm
3.0cm
95g
“The NPU is truly the Ultimate Power Adaptor for today’s professional Sound Recordest”
Briscall House, Wotton Road, Kingsnorth Industrial Estate, Ashford, Kent, TN23 6LW, United Kingdom.
Tel: +44 (0) 1233-638715 Fax: +44 (0) 1233-638747
Email: Sales@hawkwoods.com Web Site: www.hawkwoods.com
Hawk-Woods
A low voltage indicator is also sited on top of the adaptor for easy
viewing, optimised for Li-Ion the red LED will flash around 11.4volts
providing a warning of an almost discharged battery.