EKI-5726/I
16-port Gigabit Ethernet ProView Switch
Features
ƒƒ Communicates with SCADA software via Modbus/TCP
ƒƒ Communicates with NMS (Networking management system) via SNMP
ƒƒ Port-based QoS for deterministic data transmission
ƒƒ -40 ~ 75°C operating temperature range (EKI-5726I only)
ƒƒ 12 ~ 48 VDC (8.4 ~ 52.8 VDC) wide-range power input
ƒƒ EMS level 3 protection for extreme outdoor environments
ƒƒ IEEE 802.3az Energy Efficient Ethernet (EEE)
ƒƒ Jumbo Frame Support (Up to 9,216 Bytes)
ƒƒ Supports redundant 12 ~ 48 VDC power input and P-Fail relay
ƒƒ Loop detection
RoHS
COMPLIANT
2011/65/EU
Introduction
The EKI-5726/I is the world’s first convergence switch for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software
and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT.
The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately
necessary data over the remaining ports. The EKI-5726/I switch uses the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along
with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.
Specifications
Communications
Protection
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Reverse Polarity
ƒƒ Overload Current Standard
IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
LAN 10/100/1000Base-T(X)
Transmission Distance Up to 100 m
Transmission Speed Up to 1000 Mbps
Interface
ƒƒ Connectors ƒƒ LED Indicators
16 x RJ45
6-pin removable screw terminal (power & relay)
P1, P2, P-Fail, Loop detection
10/100/1000T(X): Link/Activity, Speed
Switch Properties
ƒƒ
ƒƒ
ƒƒ
ƒƒ
MAC Table Size
Packet Buffer Size
Switching Capacity
Jumbo Frame
8K
4.1M bit
32 Gbps
9216 bytes
ƒƒ Power Consumption ƒƒ Power Input ƒƒ Fault Output Environment
ƒƒ Operating Temperature EKI-5726: -10~60°C (14~140°F)
EKI-5726I: -40~75°C (-40~167°F)
ƒƒ Storage Temperature -40 ~ 85°C (-40 ~ 185°F)
ƒƒ Operating Humidity 10 ~ 95% (non-condensing)
ƒƒ Storage Humidity 10 ~ 95% (non-condensing)
ƒƒ MTBF 2,788,343 hours
Certification
ƒƒ Safety ƒƒ EMI
ƒƒ EMS
Power
Max. 8 W
12~48 VDC (8.4~52.8 VDC), redundant dual inputs
1 Relay Output
Mechanism
ƒƒ Dimensions (W x H x D)74 x 120 x 84 mm
ƒƒ Enclosure IP30, metal shell with solid mounting kits
ƒƒ Mounting DIN-Rail, Wall
Present
Present
ƒƒ Shock
ƒƒ Freefall
ƒƒ Vibration
IEC/EN60950, UL60950, UL508, Class 1 Division 2,
ATEX
FCC Part 15 Subpart B Class A, EN 55011/55022
Class A
EN 61000-4-2 (Level 3)
EN 61000-4-3 (Level 3)
EN 61000-4-4 (Level 3)
EN 61000-4-5 (Level 3)
EN 61000-4-6 (Level 3)
EN 61000-4-8 (Level 3)
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Industrial Ethernet Solutions
All product specifications are subject to change without notice
Last updated : 5-May-2015
EKI-5726/I
11.1
[0.439]
Dimensions
Unit: mm [inch]
33.4
35.6
[1.315] [1.400]
84 [3.307]
30.9
12.5
9
[1.215]
[0.492] [0.354]
15 [0.591]
41.2 [1.622]
17.8 [0.701]
10.9
[0.429]
73 [2.874]
93 [3.661]
11.7
[0.461]
16.4
[0.644]
Ordering Information
ƒƒ EKI-5726 ƒƒ EKI-5726I 16-port Gigabit Ethernet PorView switch
16-port Gigabit Ethernet ProView Switch with Wide
Temperature
Online Download www.advantech.com/products
129.8 [5.110]
38 [1.496] 47 [1.850]
EKI-5726
129.8 [5.110]
EKI-5726