Type Output torque Reduction ratio Input torque Valve attachment Factor

GW 14.1
Technical data Reversing gearboxes
Type
Output torque Reduction ratio Input torque1)
Max.
[Nm]
GW 14.1
560
1:1
590
Factor2)
Valve attachment
EN ISO
5210
DIN
3210
Shaft
Ø
Max [mm]
F14
(F10)
G1/2
30
0.95
Input shaft
Handwheel
Weight3)
Ø
[mm]
Ø
Max. [mm]
approx.
[kg]
30
(20)4)
800
20
Possible combinations with multi-turn actuators
Gearboxes
Mounting flange for
actuator
Permissible actuator
weight
Suitable AUMA multi-turn actuator
depending on
EN ISO 5210
DIN 3210
Max.[kg]
required output torque
F10
F14
F16
G0
G1/2
G3
40
80
160
SA 10.2
SA 14.2/SA 14.6
SA 16.2
GW 14.1
Use
For reversal of rotation direction
Notes on table
1) Input torque
For maximum output torque
2) Factor
Conversion factor from output torque to input torque for actuator size definition
3) Weight
Indicated weight includes gearbox without flange for multi-turn actuators
4)
Maximum input torque 120 Nm
Operation
Motor operation
Directly via electric multi-turn actuator
Mounting flanges for multi-turn actuator, refer to table
Type of duty
Manual operation
Short-time duty S2 - 15 min
Via handwheel, directly or via remote output lever arrangement
Available handwheel diameters, selection according to the max. output torque
Service conditions
Ambient temperature
–25 °C to +80 °C
Enclosure protection according to
EN 60529
Standard:
IP67
Option:
IP68
According to AUMA definition, enclosure protection IP68 meets the following requirements:
 Depth of water: maximum 8 m head of water
 Duration of continuous immersion in water: Max. 96 hours
 Up to 10 operations during continuous immersion
Corrosion protection
Standard:
KN
Suitable for installation in industrial units, in water or power plants with a low pollutant concentration
Options:
KS
Suitable for installation in industrial units, in water or power plants with a low pollutant concentration as well as for installation in occasionally or permanently aggressive
atmospheres with a moderate pollutant concentration (e.g. wastewater treatments
plants, chemical industry)
Paint
Two-component iron-mica combination
Colour
Standard:
AUMA silver-grey (similar RAL 7037)
Options:
Other colours are possible on request.
Further information
Reference documents
Dimensions Reversing gearboxes GW 14.1
Technical data SA 07.2 – SA 16.2 Multi-turn actuators with 3-phase AC motors
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
Y000.366/003/en
Issue 1.13
Page 1/1