WorkForce WF-3640 All-in

Information for treatment facilities
Company Name
Products Name
Type of equipment
Component or Material
[EICTA,CECED and EERA Joint Position Guidance September 26,2005]
SEIKO EPSON
WF-3640
IJP
Judgment
Battery (internal*) containing Mercury (Hg)/ NiCad/ Lithium/ Other
Backlighting Lamps of LCD/TFT or similar screens containing Mercury (Hg)
Mercury (Hg) in other applications**
Cadmium**
Gas discharge Lamps
Plastic containing brominated flame retardants other than in Printed Circuit
Assemblies***
Liquid Crystal Displays with surface greater than 100 cm2
Capacitors with PCB's
Capacitors with substances of concern**** + height >25 mm, diameter >25mm or
proportionately similar volume
Asbestos
Refractory ceramic fibers
Radio-active substances
Beryllium Oxide
Other forms of Beryllium
no
no
no
no
no
Gasses-which fall under Regulation(EC)2037/2000 and all hydrocarbons (HC).
no
Components with pressurized gas which need special attention Pressure >1.5 bar
no
Liquids if volume > 10cl ( or equivalence in weight,e.g. for PCB,oil...)
Mechanical components that store mechanical energy ( i.e. springs) or equivalent
parts which need special attention ( diameter > 10mm and height > 25mm or
proportionally similar volume and expanding )
no
Location No
no
no
no
no
no
no
no
no
no
yes
1
Blue area = Blue area the need for the location of the compartment/ substances within the product. When the location of
a substance/ components is requested, it is at part level, e.g. main board, housing, etc.
* Internal means that batteries can only be removed by opening the product by means of (a) tool(s).
** Substances are considered to be in the product if present above the levels specified in Commission Decision
2005/618/EC related to Directive 2002/95/(EC) (RoHS Directive) or if their use is permitted through exemptions in the
Annex of Directive 2002/
*** To be coherent with industry current standards and practices on tracking of plastic parts, Directive 2002/96 (EC)
Annex II requirement is understood to focus on plastic parts that weight more than 25 g.
**** Substance of concern other than PCB, to be specified/ addressed further in the context of Directive 2002/96 (EC)
Annex II national requirements and European developments.
Location information
Company Name
Products Name
Type of equipment
SEIKO EPSON
WF-3640
IJP
Parts name: HINGE ASSEMBLY
Parts code: 152007500
In this part
1.
COMPRESSION SPRING
φ18mm H62mm