720782002

4
3
2
ECN
11040
B
1
REVISION HISTORY
DESCRIPTION
INITIAL RELEASE
REV
00
DATE
5/7/2012
BY/APPR
RCC\
B
1
3
2
NOTES:
1
APPLY RTV #739 OR EQUAL TO ALL OPEN HOLES.
2
SEE WIRING DIAGRAM 46066 FOR ALL UNITS.
3
SET LIGHT BARS HOME POSITION PARALLEL TO BASE PLATE WHEN STOWED.
BOM
A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
TOLERANCES ON DECIMALS
0 = ` 0.030
00 = ` 0.010
000 = ` 0.005
APPROX. WT:133.6 lbmass
THIRD ANGLE PROJECTION
4
K:\Inventor WorkGroups\WS-Campbell\Inventor\720000000\720782002.idw
3
THE INFORMATION CONTAINED IN THIS
WILL-BURT
DRAWING IS THE SOLE PROPERTY OF THE
ANGLES WILL-BURT COMPANY ANY REPRODUCTION TITLE
` 1/2~
IN PART OR WHOLE WITHOUT THE WRITTEN
PERMISSION OF THE WILL-BURT COMPANY IS
PROHIBITED.
FRACTIONAL ` 1/64"
1. ALL INSIDE EDGES TO HAVE
.005" TO .035" FILLETS.
2. ALL OUTSIDE EDGES TO HAVE
.005" TO .015" CHAMFER OR RADIUS.
125
ITEM
PART NUMBER
QTY
DESCRIPTION
1
1
4522001
BASE ASSEMBLY, 7.5 CLR
2
1
4548301
NSC RCP, LIGHTS ONLY
3
1
4810702
SPC 920 (4X230W) 120VAC, REMOVABLE
4
1
4558903
NSC LABEL KIT BLK (NOT SHOWN)
5
1
900600
MAST OIL (SHIP LOOSE) (NOT SHOWN)
6
1
TP-4602001
MANUAL, NS 1.8/2.3, CE, CD VERSION (NOT SHOWN)
PROPRIETARY AND CONFIDENTIAL
AN EMPLOYEE OWNED COMPANY
ORRVILLE, OH
NS 2.3-920-4 SPC LED 110
VAC (SPECTRA)
APPROVALS
DRAWN
RCC
CHECKED
ON ALL MACHINED SURFACES
2
DATE
SIZE
5/7/2012
B
PN:
REV
DWG NO
720782002
00
SHEET 1 OF 2
720782002
1
A
4
3
2
1
CLEARENCE HOLES
PROVIDED FOR
1/2" HARDWARE
6 PLACES.
13/16
(4[121.9]
)
5/8
(12
[320.2])
(11
[279.4])
B
(
2 3/8
[61.0]
B
1/4
(15
[387.1])
7/16
(40
[1027.7])
)
(33
[838.2])
1/4
(20
[513.9])
5/16
(34
[871.6] )
1/8
(46
[1171.7])
3/16
(36
[919.8] )
MOUNTING (BOLT PATTERN)
(BOTTOM VIEW)
1/2
(57
[1460.3])
(
6 3/16
[157.2]
3/8
(9[237.8]
)
)
5/8
(8[219.7]
)
3/8
(2[59.9]
)
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
TOLERANCES ON DECIMALS
NOTES:
PRIMARY DIMENSIONS INCHES
SECONDARY DIMENSIONS MILLIMETERS.
0 = ` 0.030
00 = ` 0.010
000 = ` 0.005
APPROX. WT:133.6 lbmass
THIRD ANGLE PROJECTION
FRACTIONAL ` 1/64"
1. ALL INSIDE EDGES TO HAVE
.005" TO .035" FILLETS.
2. ALL OUTSIDE EDGES TO HAVE
.005" TO .015" CHAMFER OR RADIUS.
125
4
K:\Inventor WorkGroups\WS-Campbell\Inventor\720000000\720782002.idw
3
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
WILL-BURT
DRAWING IS THE SOLE PROPERTY OF THE
ANGLES WILL-BURT COMPANY ANY REPRODUCTION TITLE
` 1/2~
IN PART OR WHOLE WITHOUT THE WRITTEN
PERMISSION OF THE WILL-BURT COMPANY IS
PROHIBITED.
AN EMPLOYEE OWNED COMPANY
ORRVILLE, OH
NS 2.3-920-4 SPC LED 110
VAC (SPECTRA)
APPROVALS
DRAWN
RCC
CHECKED
ON ALL MACHINED SURFACES
2
DATE
SIZE
5/7/2012
B
PN:
REV
DWG NO
720782002
00
SHEET 2 OF 2
720782002
1
A